| 1 |
// SPDX-License-Identifier: GPL-2.0-only |
| 2 |
/* |
| 3 |
* Copyright (C) 2013 Linaro, Ltd. |
| 4 |
*/ |
| 5 |
|
| 6 |
&twl { |
| 7 |
pinctrl-names = "default"; |
| 8 |
pinctrl-0 = <&twl4030_pins &twl4030_vpins>; |
| 9 |
}; |
| 10 |
|
| 11 |
&omap3_pmx_core { |
| 12 |
/* |
| 13 |
* On most OMAP3 platforms, the twl4030 IRQ line is connected |
| 14 |
* to the SYS_NIRQ line on OMAP. Therefore, configure the |
| 15 |
* defaults for the SYS_NIRQ pin here. |
| 16 |
*/ |
| 17 |
twl4030_pins: twl4030-pins { |
| 18 |
pinctrl-single,pins = < |
| 19 |
OMAP3_CORE1_IOPAD(0x21e0, PIN_INPUT_PULLUP | PIN_OFF_WAKEUPENABLE | MUX_MODE0) /* sys_nirq.sys_nirq */ |
| 20 |
>; |
| 21 |
}; |
| 22 |
}; |
| 23 |
|
| 24 |
/* |
| 25 |
* If your board is not using the I2C4 pins with twl4030, then don't include |
| 26 |
* this file. For proper idle mode signaling with sys_clkreq and sys_off_mode |
| 27 |
* pins we need to configure I2C4, or else use the legacy sys_nvmode1 and |
| 28 |
* sys_nvmode2 signaling. |
| 29 |
*/ |
| 30 |
&omap3_pmx_wkup { |
| 31 |
twl4030_vpins: twl4030-vpins-pins { |
| 32 |
pinctrl-single,pins = < |
| 33 |
OMAP3_WKUP_IOPAD(0x2a00, PIN_INPUT | MUX_MODE0) /* i2c4_scl.i2c4_scl */ |
| 34 |
OMAP3_WKUP_IOPAD(0x2a02, PIN_INPUT | MUX_MODE0) /* i2c4_sda.i2c4_sda */ |
| 35 |
OMAP3_WKUP_IOPAD(0x2a06, PIN_OUTPUT | MUX_MODE0) /* sys_clkreq.sys_clkreq */ |
| 36 |
OMAP3_WKUP_IOPAD(0x2a18, PIN_OUTPUT | MUX_MODE0) /* sys_off_mode.sys_off_mode */ |
| 37 |
>; |
| 38 |
}; |
| 39 |
}; |