| 1 |
// SPDX-License-Identifier: GPL-2.0-only |
| 2 |
/dts-v1/; |
| 3 |
|
| 4 |
#include "dm814x.dtsi" |
| 5 |
|
| 6 |
/ { |
| 7 |
model = "HP t410 Smart Zero Client"; |
| 8 |
compatible = "hp,t410", "ti,dm8148", "ti,dm814"; |
| 9 |
|
| 10 |
memory@80000000 { |
| 11 |
device_type = "memory"; |
| 12 |
reg = <0x80000000 0x40000000>; /* 1 GB */ |
| 13 |
}; |
| 14 |
|
| 15 |
/* gpio9 seems to control USB VBUS regulator and/or hub power */ |
| 16 |
usb_power: regulator@9 { |
| 17 |
compatible = "regulator-fixed"; |
| 18 |
regulator-name = "usb_power"; |
| 19 |
regulator-min-microvolt = <5000000>; |
| 20 |
regulator-max-microvolt = <5000000>; |
| 21 |
gpio = <&gpio1 9 GPIO_ACTIVE_HIGH>; |
| 22 |
enable-active-high; |
| 23 |
regulator-always-on; |
| 24 |
}; |
| 25 |
|
| 26 |
vmmcsd_fixed: fixedregulator0 { |
| 27 |
compatible = "regulator-fixed"; |
| 28 |
regulator-name = "vmmcsd_fixed"; |
| 29 |
regulator-min-microvolt = <3300000>; |
| 30 |
regulator-max-microvolt = <3300000>; |
| 31 |
}; |
| 32 |
}; |
| 33 |
|
| 34 |
&cpsw_emac0 { |
| 35 |
phy-handle = <ðphy0>; |
| 36 |
phy-mode = "rgmii-id"; |
| 37 |
}; |
| 38 |
|
| 39 |
&cpsw_emac1 { |
| 40 |
phy-handle = <ðphy1>; |
| 41 |
phy-mode = "rgmii-id"; |
| 42 |
}; |
| 43 |
|
| 44 |
&davinci_mdio { |
| 45 |
ethphy0: ethernet-phy@0 { |
| 46 |
reg = <0>; |
| 47 |
}; |
| 48 |
|
| 49 |
ethphy1: ethernet-phy@1 { |
| 50 |
reg = <1>; |
| 51 |
}; |
| 52 |
}; |
| 53 |
|
| 54 |
&mmc1 { |
| 55 |
status = "disabled"; |
| 56 |
}; |
| 57 |
|
| 58 |
&mmc2 { |
| 59 |
status = "disabled"; |
| 60 |
}; |
| 61 |
|
| 62 |
&mmc3 { |
| 63 |
pinctrl-names = "default"; |
| 64 |
pinctrl-0 = <&sd2_pins>; |
| 65 |
vmmc-supply = <&vmmcsd_fixed>; |
| 66 |
bus-width = <8>; |
| 67 |
dmas = <&edma_xbar 8 0 1 /* use SDTXEVT1 instead of MCASP0TX */ |
| 68 |
&edma_xbar 9 0 2>; /* use SDRXEVT1 instead of MCASP0RX */ |
| 69 |
dma-names = "tx", "rx"; |
| 70 |
non-removable; |
| 71 |
}; |
| 72 |
|
| 73 |
&pincntl { |
| 74 |
sd2_pins: sd2-pins { |
| 75 |
pinctrl-single,pins = < |
| 76 |
DM814X_IOPAD(0x09c0, PIN_INPUT_PULLUP | 0x1) /* SD2_DAT[7] */ |
| 77 |
DM814X_IOPAD(0x09c4, PIN_INPUT_PULLUP | 0x1) /* SD2_DAT[6] */ |
| 78 |
DM814X_IOPAD(0x09c8, PIN_INPUT_PULLUP | 0x1) /* SD2_DAT[5] */ |
| 79 |
DM814X_IOPAD(0x09cc, PIN_INPUT_PULLUP | 0x1) /* SD2_DAT[4] */ |
| 80 |
DM814X_IOPAD(0x09d0, PIN_INPUT_PULLUP | 0x1) /* SD2_DAT[3] */ |
| 81 |
DM814X_IOPAD(0x09d4, PIN_INPUT_PULLUP | 0x1) /* SD2_DAT[2] */ |
| 82 |
DM814X_IOPAD(0x09d8, PIN_INPUT_PULLUP | 0x1) /* SD2_DAT[1] */ |
| 83 |
DM814X_IOPAD(0x09dc, PIN_INPUT_PULLUP | 0x1) /* SD2_DAT[0] */ |
| 84 |
DM814X_IOPAD(0x09e0, PIN_INPUT | 0x1) /* SD2_CLK */ |
| 85 |
DM814X_IOPAD(0x09f4, PIN_INPUT_PULLUP | 0x2) /* SD2_CMD */ |
| 86 |
DM814X_IOPAD(0x0920, PIN_INPUT | 0x40) /* SD2_SDCD */ |
| 87 |
>; |
| 88 |
}; |
| 89 |
|
| 90 |
usb0_pins: usb0-pins { |
| 91 |
pinctrl-single,pins = < |
| 92 |
DM814X_IOPAD(0x0c34, PIN_OUTPUT | 0x1) /* USB0_DRVVBUS */ |
| 93 |
>; |
| 94 |
}; |
| 95 |
|
| 96 |
usb1_pins: usb1-pins { |
| 97 |
pinctrl-single,pins = < |
| 98 |
DM814X_IOPAD(0x0834, PIN_OUTPUT | 0x80) /* USB1_DRVVBUS */ |
| 99 |
>; |
| 100 |
}; |
| 101 |
}; |
| 102 |
|
| 103 |
&usb0 { |
| 104 |
pinctrl-names = "default"; |
| 105 |
pinctrl-0 = <&usb0_pins>; |
| 106 |
dr_mode = "host"; |
| 107 |
}; |
| 108 |
|
| 109 |
&usb1 { |
| 110 |
pinctrl-names = "default"; |
| 111 |
pinctrl-0 = <&usb1_pins>; |
| 112 |
dr_mode = "host"; |
| 113 |
}; |