| 1 |
// SPDX-License-Identifier: GPL-2.0-only |
| 2 |
/* |
| 3 |
* Copyright (C) 2014 Joachim Eastwood <[email protected]> |
| 4 |
*/ |
| 5 |
|
| 6 |
/ { |
| 7 |
/* regulator for wl12xx on sdio4 */ |
| 8 |
wl12xx_vmmc: wl12xx_vmmc { |
| 9 |
pinctrl-names = "default"; |
| 10 |
pinctrl-0 = <&wl12xx_ctrl_pins>; |
| 11 |
compatible = "regulator-fixed"; |
| 12 |
regulator-name = "vwl1271"; |
| 13 |
regulator-min-microvolt = <1800000>; |
| 14 |
regulator-max-microvolt = <1800000>; |
| 15 |
gpio = <&gpio2 11 GPIO_ACTIVE_HIGH>; /* gpio 43 */ |
| 16 |
startup-delay-us = <70000>; |
| 17 |
enable-active-high; |
| 18 |
}; |
| 19 |
}; |
| 20 |
|
| 21 |
&omap4_pmx_core { |
| 22 |
uart2_pins: uart2-pins { |
| 23 |
pinctrl-single,pins = < |
| 24 |
OMAP4_IOPAD(0x118, PIN_INPUT_PULLUP | MUX_MODE0) /* uart2_cts.uart2_cts */ |
| 25 |
OMAP4_IOPAD(0x11a, PIN_OUTPUT | MUX_MODE0) /* uart2_rts.uart2_rts */ |
| 26 |
OMAP4_IOPAD(0x11c, PIN_INPUT_PULLUP | MUX_MODE0) /* uart2_rx.uart2_rx */ |
| 27 |
OMAP4_IOPAD(0x11e, PIN_OUTPUT | MUX_MODE0) /* uart2_tx.uart2_tx */ |
| 28 |
>; |
| 29 |
}; |
| 30 |
|
| 31 |
wl12xx_ctrl_pins: wl12xx-ctrl-pins { |
| 32 |
pinctrl-single,pins = < |
| 33 |
OMAP4_IOPAD(0x062, PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_a17.gpio_41 (WLAN_IRQ) */ |
| 34 |
OMAP4_IOPAD(0x064, PIN_OUTPUT | MUX_MODE3) /* gpmc_a18.gpio_42 (BT_EN) */ |
| 35 |
OMAP4_IOPAD(0x066, PIN_OUTPUT | MUX_MODE3) /* gpmc_a19.gpio_43 (WLAN_EN) */ |
| 36 |
>; |
| 37 |
}; |
| 38 |
|
| 39 |
mmc4_pins: mmc4-pins { |
| 40 |
pinctrl-single,pins = < |
| 41 |
OMAP4_IOPAD(0x154, PIN_INPUT_PULLUP | MUX_MODE1) /* mcspi4_clk.sdmmc4_clk */ |
| 42 |
OMAP4_IOPAD(0x156, PIN_INPUT_PULLUP | MUX_MODE1) /* mcspi4_simo.sdmmc4_cmd */ |
| 43 |
OMAP4_IOPAD(0x158, PIN_INPUT_PULLUP | MUX_MODE1) /* mcspi4_somi.sdmmc4_dat0 */ |
| 44 |
OMAP4_IOPAD(0x15e, PIN_INPUT_PULLUP | MUX_MODE1) /* uart4_tx.sdmmc4_dat1 */ |
| 45 |
OMAP4_IOPAD(0x15c, PIN_INPUT_PULLUP | MUX_MODE1) /* uart4_rx.sdmmc4_dat2 */ |
| 46 |
OMAP4_IOPAD(0x15a, PIN_INPUT_PULLUP | MUX_MODE1) /* mcspi4_cs0.sdmmc4_dat3 */ |
| 47 |
>; |
| 48 |
}; |
| 49 |
}; |
| 50 |
|
| 51 |
&uart2 { |
| 52 |
pinctrl-names = "default"; |
| 53 |
pinctrl-0 = <&uart2_pins>; |
| 54 |
status = "okay"; |
| 55 |
}; |
| 56 |
|
| 57 |
&mmc4 { |
| 58 |
pinctrl-names = "default"; |
| 59 |
pinctrl-0 = <&mmc4_pins>; |
| 60 |
vmmc-supply = <&wl12xx_vmmc>; |
| 61 |
non-removable; |
| 62 |
bus-width = <4>; |
| 63 |
cap-power-off-card; |
| 64 |
status = "okay"; |
| 65 |
|
| 66 |
#address-cells = <1>; |
| 67 |
#size-cells = <0>; |
| 68 |
wlcore: wlcore@2 { |
| 69 |
compatible = "ti,wl1271"; |
| 70 |
reg = <2>; |
| 71 |
interrupt-parent = <&gpio2>; |
| 72 |
interrupts = <9 IRQ_TYPE_LEVEL_HIGH>; /* gpio 41 */ |
| 73 |
ref-clock-frequency = <38400000>; |
| 74 |
}; |
| 75 |
}; |