| 1 |
// SPDX-License-Identifier: GPL-2.0-only |
| 2 |
/* |
| 3 |
* Copyright (C) 2014 Joachim Eastwood <[email protected]> |
| 4 |
*/ |
| 5 |
|
| 6 |
#include <dt-bindings/input/input.h> |
| 7 |
|
| 8 |
/ { |
| 9 |
aliases { |
| 10 |
display0 = &hdmi0; |
| 11 |
}; |
| 12 |
|
| 13 |
leds { |
| 14 |
compatible = "gpio-leds"; |
| 15 |
pinctrl-names = "default"; |
| 16 |
pinctrl-0 = <&gpio_led_pins>; |
| 17 |
|
| 18 |
led0 { |
| 19 |
label = "var:green:led0"; |
| 20 |
gpios = <&gpio6 13 GPIO_ACTIVE_HIGH>; /* gpio 173 */ |
| 21 |
linux,default-trigger = "heartbeat"; |
| 22 |
}; |
| 23 |
|
| 24 |
led1 { |
| 25 |
label = "var:green:led1"; |
| 26 |
gpios = <&gpio6 12 GPIO_ACTIVE_HIGH>; /* gpio 172 */ |
| 27 |
}; |
| 28 |
}; |
| 29 |
|
| 30 |
gpio-keys { |
| 31 |
compatible = "gpio-keys"; |
| 32 |
pinctrl-names = "default"; |
| 33 |
pinctrl-0 = <&gpio_key_pins>; |
| 34 |
#address-cells = <1>; |
| 35 |
#size-cells = <0>; |
| 36 |
|
| 37 |
user-key@184 { |
| 38 |
label = "user"; |
| 39 |
gpios = <&gpio6 24 GPIO_ACTIVE_HIGH>; /* gpio 184 */ |
| 40 |
linux,code = <BTN_EXTRA>; |
| 41 |
wakeup-source; |
| 42 |
}; |
| 43 |
}; |
| 44 |
|
| 45 |
hdmi0: connector { |
| 46 |
compatible = "hdmi-connector"; |
| 47 |
pinctrl-names = "default"; |
| 48 |
pinctrl-0 = <&hdmi_hpd_pins>; |
| 49 |
label = "hdmi"; |
| 50 |
type = "a"; |
| 51 |
|
| 52 |
hpd-gpios = <&gpio2 31 GPIO_ACTIVE_HIGH>; /* gpio_63 */ |
| 53 |
|
| 54 |
port { |
| 55 |
hdmi_connector_in: endpoint { |
| 56 |
remote-endpoint = <&hdmi_out>; |
| 57 |
}; |
| 58 |
}; |
| 59 |
}; |
| 60 |
}; |
| 61 |
|
| 62 |
&omap4_pmx_core { |
| 63 |
uart1_pins: uart1-pins { |
| 64 |
pinctrl-single,pins = < |
| 65 |
OMAP4_IOPAD(0x13c, PIN_INPUT_PULLUP | MUX_MODE1) /* mcspi1_cs2.uart1_cts */ |
| 66 |
OMAP4_IOPAD(0x13e, PIN_OUTPUT | MUX_MODE1) /* mcspi1_cs3.uart1_rts */ |
| 67 |
OMAP4_IOPAD(0x126, PIN_INPUT_PULLUP | MUX_MODE1) /* i2c2_scl.uart1_rx */ |
| 68 |
OMAP4_IOPAD(0x128, PIN_OUTPUT | MUX_MODE1) /* i2c2_sda.uart1_tx */ |
| 69 |
>; |
| 70 |
}; |
| 71 |
|
| 72 |
mcspi1_pins: mcspi1-pins { |
| 73 |
pinctrl-single,pins = < |
| 74 |
OMAP4_IOPAD(0x132, PIN_INPUT | MUX_MODE0) /* mcspi1_clk.mcspi1_clk */ |
| 75 |
OMAP4_IOPAD(0x134, PIN_INPUT | MUX_MODE0) /* mcspi1_somi.mcspi1_somi */ |
| 76 |
OMAP4_IOPAD(0x136, PIN_INPUT | MUX_MODE0) /* mcspi1_simo.mcspi1_simo */ |
| 77 |
OMAP4_IOPAD(0x138, PIN_INPUT | MUX_MODE0) /* mcspi1_cs0.mcspi1_cs0 */ |
| 78 |
>; |
| 79 |
}; |
| 80 |
|
| 81 |
mcasp_pins: mcsasp-pins { |
| 82 |
pinctrl-single,pins = < |
| 83 |
OMAP4_IOPAD(0x0f8, PIN_OUTPUT | MUX_MODE2) /* mcbsp2_dr.abe_mcasp_axr */ |
| 84 |
>; |
| 85 |
}; |
| 86 |
|
| 87 |
dss_dpi_pins: dss-dpi-pins { |
| 88 |
pinctrl-single,pins = < |
| 89 |
OMAP4_IOPAD(0x162, PIN_OUTPUT | MUX_MODE5) /* dispc2_data23 */ |
| 90 |
OMAP4_IOPAD(0x164, PIN_OUTPUT | MUX_MODE5) /* dispc2_data22 */ |
| 91 |
OMAP4_IOPAD(0x166, PIN_OUTPUT | MUX_MODE5) /* dispc2_data21 */ |
| 92 |
OMAP4_IOPAD(0x168, PIN_OUTPUT | MUX_MODE5) /* dispc2_data20 */ |
| 93 |
OMAP4_IOPAD(0x16a, PIN_OUTPUT | MUX_MODE5) /* dispc2_data19 */ |
| 94 |
OMAP4_IOPAD(0x16c, PIN_OUTPUT | MUX_MODE5) /* dispc2_data18 */ |
| 95 |
OMAP4_IOPAD(0x16e, PIN_OUTPUT | MUX_MODE5) /* dispc2_data15 */ |
| 96 |
OMAP4_IOPAD(0x170, PIN_OUTPUT | MUX_MODE5) /* dispc2_data14 */ |
| 97 |
OMAP4_IOPAD(0x172, PIN_OUTPUT | MUX_MODE5) /* dispc2_data13 */ |
| 98 |
OMAP4_IOPAD(0x174, PIN_OUTPUT | MUX_MODE5) /* dispc2_data12 */ |
| 99 |
OMAP4_IOPAD(0x176, PIN_OUTPUT | MUX_MODE5) /* dispc2_data11 */ |
| 100 |
OMAP4_IOPAD(0x1b4, PIN_OUTPUT | MUX_MODE5) /* dispc2_data10 */ |
| 101 |
OMAP4_IOPAD(0x1b6, PIN_OUTPUT | MUX_MODE5) /* dispc2_data9 */ |
| 102 |
OMAP4_IOPAD(0x1b8, PIN_OUTPUT | MUX_MODE5) /* dispc2_data16 */ |
| 103 |
OMAP4_IOPAD(0x1ba, PIN_OUTPUT | MUX_MODE5) /* dispc2_data17 */ |
| 104 |
OMAP4_IOPAD(0x1bc, PIN_OUTPUT | MUX_MODE5) /* dispc2_hsync */ |
| 105 |
OMAP4_IOPAD(0x1be, PIN_OUTPUT | MUX_MODE5) /* dispc2_pclk */ |
| 106 |
OMAP4_IOPAD(0x1c0, PIN_OUTPUT | MUX_MODE5) /* dispc2_vsync */ |
| 107 |
OMAP4_IOPAD(0x1c2, PIN_OUTPUT | MUX_MODE5) /* dispc2_de */ |
| 108 |
OMAP4_IOPAD(0x1c4, PIN_OUTPUT | MUX_MODE5) /* dispc2_data8 */ |
| 109 |
OMAP4_IOPAD(0x1c6, PIN_OUTPUT | MUX_MODE5) /* dispc2_data7 */ |
| 110 |
OMAP4_IOPAD(0x1c8, PIN_OUTPUT | MUX_MODE5) /* dispc2_data6 */ |
| 111 |
OMAP4_IOPAD(0x1ca, PIN_OUTPUT | MUX_MODE5) /* dispc2_data5 */ |
| 112 |
OMAP4_IOPAD(0x1cc, PIN_OUTPUT | MUX_MODE5) /* dispc2_data4 */ |
| 113 |
OMAP4_IOPAD(0x1ce, PIN_OUTPUT | MUX_MODE5) /* dispc2_data3 */ |
| 114 |
OMAP4_IOPAD(0x1d0, PIN_OUTPUT | MUX_MODE5) /* dispc2_data2 */ |
| 115 |
OMAP4_IOPAD(0x1d2, PIN_OUTPUT | MUX_MODE5) /* dispc2_data1 */ |
| 116 |
OMAP4_IOPAD(0x1d4, PIN_OUTPUT | MUX_MODE5) /* dispc2_data0 */ |
| 117 |
>; |
| 118 |
}; |
| 119 |
|
| 120 |
dss_hdmi_pins: dss-hdmi-pins { |
| 121 |
pinctrl-single,pins = < |
| 122 |
OMAP4_IOPAD(0x09a, PIN_INPUT | MUX_MODE0) /* hdmi_cec.hdmi_cec */ |
| 123 |
OMAP4_IOPAD(0x09c, PIN_INPUT_PULLUP | MUX_MODE0) /* hdmi_scl.hdmi_scl */ |
| 124 |
OMAP4_IOPAD(0x09e, PIN_INPUT_PULLUP | MUX_MODE0) /* hdmi_sda.hdmi_sda */ |
| 125 |
>; |
| 126 |
}; |
| 127 |
|
| 128 |
i2c4_pins: i2c4-pins { |
| 129 |
pinctrl-single,pins = < |
| 130 |
OMAP4_IOPAD(0x12e, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c4_scl */ |
| 131 |
OMAP4_IOPAD(0x130, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c4_sda */ |
| 132 |
>; |
| 133 |
}; |
| 134 |
|
| 135 |
mmc5_pins: mmc5-pins { |
| 136 |
pinctrl-single,pins = < |
| 137 |
OMAP4_IOPAD(0x0f6, PIN_INPUT | MUX_MODE3) /* abe_mcbsp2_clkx.gpio_110 */ |
| 138 |
OMAP4_IOPAD(0x148, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_clk.sdmmc5_clk */ |
| 139 |
OMAP4_IOPAD(0x14a, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_cmd.sdmmc5_cmd */ |
| 140 |
OMAP4_IOPAD(0x14c, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_dat0.sdmmc5_dat0 */ |
| 141 |
OMAP4_IOPAD(0x14e, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_dat1.sdmmc5_dat1 */ |
| 142 |
OMAP4_IOPAD(0x150, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_dat2.sdmmc5_dat2 */ |
| 143 |
OMAP4_IOPAD(0x152, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_dat3.sdmmc5_dat3 */ |
| 144 |
>; |
| 145 |
}; |
| 146 |
|
| 147 |
gpio_led_pins: gpio-led-pins { |
| 148 |
pinctrl-single,pins = < |
| 149 |
OMAP4_IOPAD(0x17e, PIN_OUTPUT | MUX_MODE3) /* kpd_col4.gpio_172 */ |
| 150 |
OMAP4_IOPAD(0x180, PIN_OUTPUT | MUX_MODE3) /* kpd_col5.gpio_173 */ |
| 151 |
>; |
| 152 |
}; |
| 153 |
|
| 154 |
gpio_key_pins: gpio-key-pins { |
| 155 |
pinctrl-single,pins = < |
| 156 |
OMAP4_IOPAD(0x1a2, PIN_INPUT | MUX_MODE3) /* sys_boot0.gpio_184 */ |
| 157 |
>; |
| 158 |
}; |
| 159 |
|
| 160 |
ks8851_irq_pins: ks8851-irq-pins { |
| 161 |
pinctrl-single,pins = < |
| 162 |
OMAP4_IOPAD(0x17c, PIN_INPUT_PULLUP | MUX_MODE3) /* kpd_col3.gpio_171 */ |
| 163 |
>; |
| 164 |
}; |
| 165 |
|
| 166 |
hdmi_hpd_pins: hdmi-hpd-pins { |
| 167 |
pinctrl-single,pins = < |
| 168 |
OMAP4_IOPAD(0x098, PIN_INPUT_PULLDOWN | MUX_MODE3) /* hdmi_hpd.gpio_63 */ |
| 169 |
>; |
| 170 |
}; |
| 171 |
|
| 172 |
backlight_pins: backlight-pins { |
| 173 |
pinctrl-single,pins = < |
| 174 |
OMAP4_IOPAD(0x116, PIN_OUTPUT | MUX_MODE3) /* abe_dmic_din3.gpio_122 */ |
| 175 |
>; |
| 176 |
}; |
| 177 |
}; |
| 178 |
|
| 179 |
&i2c4 { |
| 180 |
pinctrl-names = "default"; |
| 181 |
pinctrl-0 = <&i2c4_pins>; |
| 182 |
clock-frequency = <400000>; |
| 183 |
status = "okay"; |
| 184 |
}; |
| 185 |
|
| 186 |
&uart1 { |
| 187 |
pinctrl-names = "default"; |
| 188 |
pinctrl-0 = <&uart1_pins>; |
| 189 |
status = "okay"; |
| 190 |
}; |
| 191 |
|
| 192 |
&mcspi1 { |
| 193 |
pinctrl-names = "default"; |
| 194 |
pinctrl-0 = <&mcspi1_pins>; |
| 195 |
status = "okay"; |
| 196 |
|
| 197 |
ethernet@0 { |
| 198 |
compatible = "ks8851"; |
| 199 |
pinctrl-names = "default"; |
| 200 |
pinctrl-0 = <&ks8851_irq_pins>; |
| 201 |
spi-max-frequency = <24000000>; |
| 202 |
reg = <0>; |
| 203 |
interrupt-parent = <&gpio6>; |
| 204 |
interrupts = <11 IRQ_TYPE_LEVEL_LOW>; /* gpio 171 */ |
| 205 |
}; |
| 206 |
}; |
| 207 |
|
| 208 |
&mmc5 { |
| 209 |
pinctrl-names = "default"; |
| 210 |
pinctrl-0 = <&mmc5_pins>; |
| 211 |
vmmc-supply = <&vbat>; |
| 212 |
bus-width = <4>; |
| 213 |
cd-gpios = <&gpio4 14 GPIO_ACTIVE_HIGH>; /* gpio 110 */ |
| 214 |
status = "okay"; |
| 215 |
}; |
| 216 |
|
| 217 |
&dss { |
| 218 |
status = "okay"; |
| 219 |
}; |
| 220 |
|
| 221 |
&hdmi { |
| 222 |
status = "okay"; |
| 223 |
pinctrl-names = "default"; |
| 224 |
pinctrl-0 = <&dss_hdmi_pins>; |
| 225 |
vdda-supply = <&vdac>; |
| 226 |
|
| 227 |
port { |
| 228 |
hdmi_out: endpoint { |
| 229 |
remote-endpoint = <&hdmi_connector_in>; |
| 230 |
}; |
| 231 |
}; |
| 232 |
}; |