| 1 |
// SPDX-License-Identifier: GPL-2.0-only |
| 2 |
/* |
| 3 |
* Copyright (C) 2011 Texas Instruments Incorporated - https://www.ti.com/ |
| 4 |
*/ |
| 5 |
/dts-v1/; |
| 6 |
|
| 7 |
#include "am3517.dtsi" |
| 8 |
#include "am3517-som.dtsi" |
| 9 |
#include "am3517-evm-ui.dtsi" |
| 10 |
#include <dt-bindings/input/input.h> |
| 11 |
|
| 12 |
/ { |
| 13 |
model = "TI AM3517 EVM (AM3517/05 TMDSEVM3517)"; |
| 14 |
compatible = "ti,am3517-evm", "ti,am3517", "ti,omap3"; |
| 15 |
|
| 16 |
aliases { |
| 17 |
display0 = &lcd0; |
| 18 |
}; |
| 19 |
|
| 20 |
chosen { |
| 21 |
stdout-path = &uart3; |
| 22 |
}; |
| 23 |
|
| 24 |
memory@80000000 { |
| 25 |
device_type = "memory"; |
| 26 |
reg = <0x80000000 0x10000000>; /* 256 MB */ |
| 27 |
}; |
| 28 |
|
| 29 |
vmmc_fixed: vmmc { |
| 30 |
compatible = "regulator-fixed"; |
| 31 |
regulator-name = "vmmc_fixed"; |
| 32 |
regulator-min-microvolt = <3300000>; |
| 33 |
regulator-max-microvolt = <3300000>; |
| 34 |
}; |
| 35 |
|
| 36 |
gpio-keys { |
| 37 |
compatible = "gpio-keys-polled"; |
| 38 |
poll-interval = <100>; |
| 39 |
|
| 40 |
button-user { |
| 41 |
label = "User Push Button"; |
| 42 |
linux,code = <BTN_0>; |
| 43 |
gpios = <&tca6416 5 GPIO_ACTIVE_LOW>; |
| 44 |
}; |
| 45 |
|
| 46 |
switch-1 { |
| 47 |
label = "User Switch 1"; |
| 48 |
linux,code = <BTN_1>; |
| 49 |
gpios = <&tca6416 8 GPIO_ACTIVE_LOW>; |
| 50 |
}; |
| 51 |
|
| 52 |
switch-2 { |
| 53 |
label = "User Switch 2"; |
| 54 |
linux,code = <BTN_2>; |
| 55 |
gpios = <&tca6416 9 GPIO_ACTIVE_LOW>; |
| 56 |
}; |
| 57 |
|
| 58 |
switch-3 { |
| 59 |
label = "User Switch 3"; |
| 60 |
linux,code = <BTN_3>; |
| 61 |
gpios = <&tca6416 10 GPIO_ACTIVE_LOW>; |
| 62 |
}; |
| 63 |
|
| 64 |
switch-4 { |
| 65 |
label = "User Switch 4"; |
| 66 |
linux,code = <BTN_4>; |
| 67 |
gpios = <&tca6416 11 GPIO_ACTIVE_LOW>; |
| 68 |
}; |
| 69 |
|
| 70 |
switch-5 { |
| 71 |
label = "User Switch 5"; |
| 72 |
linux,code = <BTN_5>; |
| 73 |
gpios = <&tca6416 12 GPIO_ACTIVE_LOW>; |
| 74 |
}; |
| 75 |
|
| 76 |
switch-6 { |
| 77 |
label = "User Switch 6"; |
| 78 |
linux,code = <BTN_6>; |
| 79 |
gpios = <&tca6416 13 GPIO_ACTIVE_LOW>; |
| 80 |
}; |
| 81 |
|
| 82 |
switch-7 { |
| 83 |
label = "User Switch 7"; |
| 84 |
linux,code = <BTN_7>; |
| 85 |
gpios = <&tca6416 14 GPIO_ACTIVE_LOW>; |
| 86 |
}; |
| 87 |
|
| 88 |
switch-8 { |
| 89 |
label = "User Switch 8"; |
| 90 |
linux,code = <BTN_8>; |
| 91 |
gpios = <&tca6416 15 GPIO_ACTIVE_LOW>; |
| 92 |
}; |
| 93 |
}; |
| 94 |
|
| 95 |
gpio-leds { |
| 96 |
compatible = "gpio-leds"; |
| 97 |
|
| 98 |
pinctrl-names = "default"; |
| 99 |
pinctrl-0 = <&leds_pins>; |
| 100 |
|
| 101 |
user_led_1 { |
| 102 |
label = "am3517evm:green:user_led_1"; |
| 103 |
gpios = <&tca6416 7 GPIO_ACTIVE_LOW>; |
| 104 |
default-state = "on"; |
| 105 |
}; |
| 106 |
|
| 107 |
user_led_2 { |
| 108 |
label = "am3517evm:green:user_led_2"; |
| 109 |
gpios = <&tca6416 6 GPIO_ACTIVE_LOW>; |
| 110 |
default-state = "on"; |
| 111 |
}; |
| 112 |
|
| 113 |
user_led_3 { |
| 114 |
label = "am3517evm:green:user_led_3"; |
| 115 |
gpios = <&gpio1 11 GPIO_ACTIVE_HIGH>; |
| 116 |
linux,default-trigger = "mmc0"; /* SD/MMC card activity */ |
| 117 |
}; |
| 118 |
|
| 119 |
user_led_4 { |
| 120 |
label = "am3517evm:green:user_led_4"; |
| 121 |
gpios = <&gpio1 31 GPIO_ACTIVE_HIGH>; |
| 122 |
linux,default-trigger = "heartbeat"; |
| 123 |
}; |
| 124 |
}; |
| 125 |
|
| 126 |
lcd0: display@0 { |
| 127 |
/* This isn't the exact LCD, but the timings meet spec */ |
| 128 |
/* To make it work, set CONFIG_OMAP2_DSS_MIN_FCK_PER_PCK=4 */ |
| 129 |
compatible = "newhaven,nhd-4.3-480272ef-atxl"; |
| 130 |
label = "15"; |
| 131 |
backlight = <&bl>; |
| 132 |
enable-gpios = <&gpio6 16 GPIO_ACTIVE_HIGH>; /* gpio176, lcd INI */ |
| 133 |
vcc-supply = <&vdd_io_reg>; |
| 134 |
|
| 135 |
port { |
| 136 |
lcd_in: endpoint { |
| 137 |
remote-endpoint = <&dpi_out>; |
| 138 |
}; |
| 139 |
}; |
| 140 |
}; |
| 141 |
|
| 142 |
bl: backlight { |
| 143 |
compatible = "pwm-backlight"; |
| 144 |
pinctrl-names = "default"; |
| 145 |
power-supply = <&vdd_io_reg>; |
| 146 |
pinctrl-0 = <&backlight_pins>; |
| 147 |
pwms = <&pwm11 0 5000000 0>; |
| 148 |
brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>; |
| 149 |
default-brightness-level = <7>; |
| 150 |
enable-gpios = <&gpio6 22 GPIO_ACTIVE_HIGH>; /* gpio_182 */ |
| 151 |
}; |
| 152 |
|
| 153 |
pwm11: pwm-11 { |
| 154 |
compatible = "ti,omap-dmtimer-pwm"; |
| 155 |
pinctrl-names = "default"; |
| 156 |
pinctrl-0 = <&pwm_pins>; |
| 157 |
ti,timers = <&timer11>; |
| 158 |
#pwm-cells = <3>; |
| 159 |
ti,clock-source = <0x01>; |
| 160 |
}; |
| 161 |
|
| 162 |
/* HS USB Host PHY on PORT 1 */ |
| 163 |
hsusb1_phy: hsusb1_phy { |
| 164 |
pinctrl-names = "default"; |
| 165 |
pinctrl-0 = <&hsusb1_rst_pins>; |
| 166 |
compatible = "usb-nop-xceiv"; |
| 167 |
reset-gpios = <&gpio2 25 GPIO_ACTIVE_LOW>; /* gpio_57 */ |
| 168 |
#phy-cells = <0>; |
| 169 |
}; |
| 170 |
}; |
| 171 |
|
| 172 |
&davinci_emac { |
| 173 |
pinctrl-names = "default"; |
| 174 |
pinctrl-0 = <ðernet_pins>; |
| 175 |
phy-mode = "rmii"; |
| 176 |
phy-handle = <ðphy0>; |
| 177 |
status = "okay"; |
| 178 |
}; |
| 179 |
|
| 180 |
&davinci_mdio { |
| 181 |
#address-cells = <1>; |
| 182 |
#size-cells = <0>; |
| 183 |
status = "okay"; |
| 184 |
|
| 185 |
ethphy0: ethernet-phy@0 { |
| 186 |
pinctrl-names = "default"; |
| 187 |
pinctrl-0 = <&enet_phy_pins>; |
| 188 |
compatible = "ethernet-phy-ieee802.3-c22"; |
| 189 |
reg = <0>; |
| 190 |
interrupt-parent = <&gpio2>; |
| 191 |
interrupts = <26 IRQ_TYPE_LEVEL_LOW>; /* gpio_58 */ |
| 192 |
}; |
| 193 |
}; |
| 194 |
|
| 195 |
&dss { |
| 196 |
status = "okay"; |
| 197 |
|
| 198 |
pinctrl-names = "default"; |
| 199 |
pinctrl-0 = <&dss_dpi_pins>; |
| 200 |
|
| 201 |
vdds_dsi-supply = <&vdd_io_reg>; |
| 202 |
vdda_video-supply = <&vdd_io_reg>; |
| 203 |
|
| 204 |
port { |
| 205 |
dpi_out: endpoint { |
| 206 |
remote-endpoint = <&lcd_in>; |
| 207 |
data-lines = <16>; |
| 208 |
}; |
| 209 |
}; |
| 210 |
}; |
| 211 |
|
| 212 |
&i2c2 { |
| 213 |
pinctrl-names = "default"; |
| 214 |
pinctrl-0 = <&i2c2_pins>; |
| 215 |
clock-frequency = <400000>; |
| 216 |
/* User DIP swithes [1:8] / User LEDS [1:2] */ |
| 217 |
tca6416: gpio@21 { |
| 218 |
compatible = "ti,tca6416"; |
| 219 |
reg = <0x21>; |
| 220 |
gpio-controller; |
| 221 |
#gpio-cells = <2>; |
| 222 |
vcc-supply = <&vdd_io_reg>; |
| 223 |
}; |
| 224 |
}; |
| 225 |
|
| 226 |
&i2c3 { |
| 227 |
pinctrl-names = "default"; |
| 228 |
pinctrl-0 = <&i2c3_pins>; |
| 229 |
clock-frequency = <400000>; |
| 230 |
}; |
| 231 |
|
| 232 |
&mmc1 { |
| 233 |
status = "okay"; |
| 234 |
pinctrl-names = "default"; |
| 235 |
pinctrl-0 = <&mmc1_pins>; |
| 236 |
vmmc-supply = <&vmmc_fixed>; |
| 237 |
bus-width = <4>; |
| 238 |
wp-gpios = <&gpio4 30 GPIO_ACTIVE_HIGH>; /* gpio_126 */ |
| 239 |
cd-gpios = <&gpio4 31 GPIO_ACTIVE_LOW>; /* gpio_127 */ |
| 240 |
}; |
| 241 |
|
| 242 |
&mmc3 { |
| 243 |
status = "disabled"; |
| 244 |
}; |
| 245 |
|
| 246 |
&usbhshost { |
| 247 |
pinctrl-names = "default"; |
| 248 |
pinctrl-0 = <&hsusb1_pins>; |
| 249 |
port1-mode = "ehci-phy"; |
| 250 |
}; |
| 251 |
|
| 252 |
&usbhsehci { |
| 253 |
phys = <&hsusb1_phy>; |
| 254 |
}; |
| 255 |
|
| 256 |
&omap3_pmx_core { |
| 257 |
|
| 258 |
ethernet_pins: ethernet-pins { |
| 259 |
pinctrl-single,pins = < |
| 260 |
OMAP3_CORE1_IOPAD(0x21fe, PIN_INPUT | MUX_MODE0) /* rmii_mdio_data */ |
| 261 |
OMAP3_CORE1_IOPAD(0x2200, MUX_MODE0) /* rmii_mdio_clk */ |
| 262 |
OMAP3_CORE1_IOPAD(0x2202, PIN_INPUT_PULLDOWN | MUX_MODE0) /* rmii_rxd0 */ |
| 263 |
OMAP3_CORE1_IOPAD(0x2204, PIN_INPUT_PULLDOWN | MUX_MODE0) /* rmii_rxd1 */ |
| 264 |
OMAP3_CORE1_IOPAD(0x2206, PIN_INPUT_PULLDOWN | MUX_MODE0) /* rmii_crs_dv */ |
| 265 |
OMAP3_CORE1_IOPAD(0x2208, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* rmii_rxer */ |
| 266 |
OMAP3_CORE1_IOPAD(0x220a, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* rmii_txd0 */ |
| 267 |
OMAP3_CORE1_IOPAD(0x220c, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* rmii_txd1 */ |
| 268 |
OMAP3_CORE1_IOPAD(0x220e, PIN_OUTPUT_PULLDOWN |MUX_MODE0) /* rmii_txen */ |
| 269 |
OMAP3_CORE1_IOPAD(0x2210, PIN_INPUT_PULLDOWN | MUX_MODE0) /* rmii_50mhz_clk */ |
| 270 |
>; |
| 271 |
}; |
| 272 |
|
| 273 |
enet_phy_pins: ethernet-phy-pins { |
| 274 |
pinctrl-single,pins = < |
| 275 |
OMAP3_CORE1_IOPAD(0x20bc, PIN_INPUT | MUX_MODE4) /* gpmc_ncs7.gpio_57 */ |
| 276 |
>; |
| 277 |
}; |
| 278 |
|
| 279 |
i2c2_pins: i2c2-pins { |
| 280 |
pinctrl-single,pins = < |
| 281 |
OMAP3_CORE1_IOPAD(0x21be, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c2_scl */ |
| 282 |
OMAP3_CORE1_IOPAD(0x21c0, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c2_sda */ |
| 283 |
>; |
| 284 |
}; |
| 285 |
|
| 286 |
i2c3_pins: i2c3-pins { |
| 287 |
pinctrl-single,pins = < |
| 288 |
OMAP3_CORE1_IOPAD(0x21c2, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c3_scl */ |
| 289 |
OMAP3_CORE1_IOPAD(0x21c4, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c3_sda */ |
| 290 |
>; |
| 291 |
}; |
| 292 |
|
| 293 |
mmc1_pins: mmc1-pins { |
| 294 |
pinctrl-single,pins = < |
| 295 |
OMAP3_CORE1_IOPAD(0x2144, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_clk.sdmmc1_clk */ |
| 296 |
OMAP3_CORE1_IOPAD(0x2146, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_cmd.sdmmc1_cmd */ |
| 297 |
OMAP3_CORE1_IOPAD(0x2148, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat0.sdmmc1_dat0 */ |
| 298 |
OMAP3_CORE1_IOPAD(0x214a, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat1.sdmmc1_dat1 */ |
| 299 |
OMAP3_CORE1_IOPAD(0x214c, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat2.sdmmc1_dat2 */ |
| 300 |
OMAP3_CORE1_IOPAD(0x214e, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat3.sdmmc1_dat3 */ |
| 301 |
OMAP3_CORE1_IOPAD(0x2150, PIN_INPUT_PULLUP | MUX_MODE4) /* sdmmc1_dat4.gpio_126 */ |
| 302 |
OMAP3_CORE1_IOPAD(0x2152, PIN_INPUT_PULLUP | MUX_MODE4) /* sdmmc1_dat5.gpio_127 */ |
| 303 |
>; |
| 304 |
}; |
| 305 |
|
| 306 |
pwm_pins: pwm-pins { |
| 307 |
pinctrl-single,pins = < |
| 308 |
OMAP3_CORE1_IOPAD(0x21dc, PIN_OUTPUT | MUX_MODE1) /* mcspi2_cs0.gpt11_pwm */ |
| 309 |
>; |
| 310 |
}; |
| 311 |
|
| 312 |
backlight_pins: backlight-pins { |
| 313 |
pinctrl-single,pins = < |
| 314 |
OMAP3_CORE1_IOPAD(0x21de, PIN_OUTPUT | MUX_MODE4) /* mcspi2_cs1.gpio_182 */ |
| 315 |
>; |
| 316 |
}; |
| 317 |
|
| 318 |
dss_dpi_pins: dss-dpi-pins { |
| 319 |
pinctrl-single,pins = < |
| 320 |
OMAP3_CORE1_IOPAD(0x21d2, PIN_OUTPUT | MUX_MODE4) /* mcspi1_cs2.gpio_176 */ |
| 321 |
OMAP3_CORE1_IOPAD(0x20d4, PIN_OUTPUT | MUX_MODE0) /* dss_pclk.dss_pclk */ |
| 322 |
OMAP3_CORE1_IOPAD(0x20d6, PIN_OUTPUT | MUX_MODE0) /* dss_hsync.dss_hsync */ |
| 323 |
OMAP3_CORE1_IOPAD(0x20d8, PIN_OUTPUT | MUX_MODE0) /* dss_vsync.dss_vsync */ |
| 324 |
OMAP3_CORE1_IOPAD(0x20da, PIN_OUTPUT | MUX_MODE0) /* dss_acbias.dss_acbias */ |
| 325 |
OMAP3_CORE1_IOPAD(0x20dc, PIN_OUTPUT | MUX_MODE0) /* dss_data0.dss_data0 */ |
| 326 |
OMAP3_CORE1_IOPAD(0x20de, PIN_OUTPUT | MUX_MODE0) /* dss_data1.dss_data1 */ |
| 327 |
OMAP3_CORE1_IOPAD(0x20e0, PIN_OUTPUT | MUX_MODE0) /* dss_data2.dss_data2 */ |
| 328 |
OMAP3_CORE1_IOPAD(0x20e2, PIN_OUTPUT | MUX_MODE0) /* dss_data3.dss_data3 */ |
| 329 |
OMAP3_CORE1_IOPAD(0x20e4, PIN_OUTPUT | MUX_MODE0) /* dss_data4.dss_data4 */ |
| 330 |
OMAP3_CORE1_IOPAD(0x20e6, PIN_OUTPUT | MUX_MODE0) /* dss_data5.dss_data5 */ |
| 331 |
OMAP3_CORE1_IOPAD(0x20e8, PIN_OUTPUT | MUX_MODE0) /* dss_data6.dss_data6 */ |
| 332 |
OMAP3_CORE1_IOPAD(0x20ea, PIN_OUTPUT | MUX_MODE0) /* dss_data7.dss_data7 */ |
| 333 |
OMAP3_CORE1_IOPAD(0x20ec, PIN_OUTPUT | MUX_MODE0) /* dss_data8.dss_data8 */ |
| 334 |
OMAP3_CORE1_IOPAD(0x20ee, PIN_OUTPUT | MUX_MODE0) /* dss_data9.dss_data9 */ |
| 335 |
OMAP3_CORE1_IOPAD(0x20f0, PIN_OUTPUT | MUX_MODE0) /* dss_data10.dss_data10 */ |
| 336 |
OMAP3_CORE1_IOPAD(0x20f2, PIN_OUTPUT | MUX_MODE0) /* dss_data11.dss_data11 */ |
| 337 |
OMAP3_CORE1_IOPAD(0x20f4, PIN_OUTPUT | MUX_MODE0) /* dss_data12.dss_data12 */ |
| 338 |
OMAP3_CORE1_IOPAD(0x20f6, PIN_OUTPUT | MUX_MODE0) /* dss_data13.dss_data13 */ |
| 339 |
OMAP3_CORE1_IOPAD(0x20f8, PIN_OUTPUT | MUX_MODE0) /* dss_data14.dss_data14 */ |
| 340 |
OMAP3_CORE1_IOPAD(0x20fa, PIN_OUTPUT | MUX_MODE0) /* dss_data15.dss_data15 */ |
| 341 |
>; |
| 342 |
}; |
| 343 |
|
| 344 |
hsusb1_rst_pins: hsusb1-rst-pins { |
| 345 |
pinctrl-single,pins = < |
| 346 |
OMAP3_CORE1_IOPAD(0x20ba, PIN_OUTPUT | MUX_MODE4) /* gpmc_ncs6.gpio_57 */ |
| 347 |
>; |
| 348 |
}; |
| 349 |
}; |
| 350 |
|
| 351 |
&omap3_pmx_core2 { |
| 352 |
|
| 353 |
hsusb1_pins: hsusb1-pins { |
| 354 |
pinctrl-single,pins = < |
| 355 |
OMAP3430_CORE2_IOPAD(0x25d8, PIN_OUTPUT | MUX_MODE3) /* etk_clk.hsusb1_stp */ |
| 356 |
OMAP3430_CORE2_IOPAD(0x25da, PIN_OUTPUT | MUX_MODE3) /* etk_ctl.hsusb1_clk */ |
| 357 |
OMAP3430_CORE2_IOPAD(0x25ec, PIN_INPUT | MUX_MODE3) /* etk_d8.hsusb1_dir */ |
| 358 |
OMAP3430_CORE2_IOPAD(0x25ee, PIN_INPUT | MUX_MODE3) /* etk_d9.hsusb1_nxt */ |
| 359 |
OMAP3430_CORE2_IOPAD(0x25dc, PIN_INPUT | MUX_MODE3) /* etk_d0.hsusb1_data0 */ |
| 360 |
OMAP3430_CORE2_IOPAD(0x25de, PIN_INPUT | MUX_MODE3) /* etk_d1.hsusb1_data1 */ |
| 361 |
OMAP3430_CORE2_IOPAD(0x25e0, PIN_INPUT | MUX_MODE3) /* etk_d2.hsusb1_data2 */ |
| 362 |
OMAP3430_CORE2_IOPAD(0x25ea, PIN_INPUT | MUX_MODE3) /* etk_d7.hsusb1_data3 */ |
| 363 |
OMAP3430_CORE2_IOPAD(0x25e4, PIN_INPUT | MUX_MODE3) /* etk_d4.hsusb1_data4 */ |
| 364 |
OMAP3430_CORE2_IOPAD(0x25e6, PIN_INPUT | MUX_MODE3) /* etk_d5.hsusb1_data5 */ |
| 365 |
OMAP3430_CORE2_IOPAD(0x25e8, PIN_INPUT | MUX_MODE3) /* etk_d6.hsusb1_data6 */ |
| 366 |
OMAP3430_CORE2_IOPAD(0x25e2, PIN_INPUT | MUX_MODE3) /* etk_d3.hsusb1_data7 */ |
| 367 |
>; |
| 368 |
}; |
| 369 |
}; |
| 370 |
|
| 371 |
&omap3_pmx_wkup { |
| 372 |
leds_pins: leds-pins { |
| 373 |
pinctrl-single,pins = < |
| 374 |
OMAP3_WKUP_IOPAD(0x2a24, PIN_OUTPUT_PULLUP | MUX_MODE4) /* jtag_emu0.gpio_11 */ |
| 375 |
OMAP3_WKUP_IOPAD(0x2a26, PIN_OUTPUT_PULLUP | MUX_MODE4) /* jtag_emu1.gpio_31 */ |
| 376 |
>; |
| 377 |
}; |
| 378 |
}; |