| 1 |
// SPDX-License-Identifier: GPL-2.0 |
| 2 |
/dts-v1/; |
| 3 |
|
| 4 |
#include "omap2420-n8x0-common.dtsi" |
| 5 |
|
| 6 |
/ { |
| 7 |
model = "Nokia N810"; |
| 8 |
compatible = "nokia,n810", "nokia,n8x0", "ti,omap2420", "ti,omap2"; |
| 9 |
|
| 10 |
vio_ape: vio_ape { |
| 11 |
compatible = "regulator-fixed"; |
| 12 |
regulator-name = "vio_ape"; |
| 13 |
regulator-min-microvolt = <1800000>; |
| 14 |
regulator-max-microvolt = <1800000>; |
| 15 |
}; |
| 16 |
|
| 17 |
v28_aic: v28_aic { |
| 18 |
compatible = "regulator-fixed"; |
| 19 |
regulator-name = "v28_aic"; |
| 20 |
regulator-min-microvolt = <2800000>; |
| 21 |
regulator-max-microvolt = <2800000>; |
| 22 |
}; |
| 23 |
}; |
| 24 |
|
| 25 |
&omap2420_pmx { |
| 26 |
mcbsp2_pins: mcbsp2-pins { |
| 27 |
pinctrl-single,pins = < |
| 28 |
OMAP2420_CORE_IOPAD(0x0124, PIN_INPUT | MUX_MODE1) /* eac_ac_sclk.mcbsp2_clkx */ |
| 29 |
OMAP2420_CORE_IOPAD(0x0125, PIN_INPUT | MUX_MODE1) /* eac_ac_fs.mcbsp2_fsx */ |
| 30 |
OMAP2420_CORE_IOPAD(0x0126, PIN_INPUT | MUX_MODE1) /* eac_ac_din.mcbsp2_dr */ |
| 31 |
OMAP2420_CORE_IOPAD(0x0127, PIN_OUTPUT | MUX_MODE1) /* eac_ac_dout.mcbsp2_dx */ |
| 32 |
>; |
| 33 |
}; |
| 34 |
|
| 35 |
aic33_pins: aic33-pins { |
| 36 |
pinctrl-single,pins = < |
| 37 |
OMAP2420_CORE_IOPAD(0x0129, PIN_OUTPUT | MUX_MODE3) /* eac_ac_rst.gpio118 */ |
| 38 |
OMAP2420_CORE_IOPAD(0x00e8, PIN_OUTPUT | MUX_MODE2) /* vlynq_tx1.sys_clkout2 */ |
| 39 |
>; |
| 40 |
}; |
| 41 |
}; |
| 42 |
|
| 43 |
&i2c2 { |
| 44 |
aic33@18 { |
| 45 |
compatible = "ti,tlv320aic33"; |
| 46 |
reg = <0x18>; |
| 47 |
|
| 48 |
pinctrl-names = "default"; |
| 49 |
pinctrl-0 = <&aic33_pins>; |
| 50 |
|
| 51 |
reset-gpios = <&gpio4 22 GPIO_ACTIVE_LOW>; /* gpio118 */ |
| 52 |
|
| 53 |
ai3x-gpio-func = < |
| 54 |
10 /* AIC3X_GPIO1_FUNC_DIGITAL_MIC_MODCLK */ |
| 55 |
5 /* AIC3X_GPIO2_FUNC_DIGITAL_MIC_INPUT */ |
| 56 |
>; |
| 57 |
ai3x-micbias-vg = <1>; /* 2V */ |
| 58 |
|
| 59 |
AVDD-supply = <&v28_aic>; |
| 60 |
DRVDD-supply = <&v28_aic>; |
| 61 |
IOVDD-supply = <&vio_ape>; |
| 62 |
DVDD-supply = <&vio_ape>; |
| 63 |
|
| 64 |
assigned-clocks = <&sys_clkout2_src>, <&sys_clkout2>; |
| 65 |
assigned-clock-parents = <&func_96m_ck>; |
| 66 |
assigned-clock-rates = <0>, <12000000>; |
| 67 |
}; |
| 68 |
}; |
| 69 |
|
| 70 |
&mcbsp2 { |
| 71 |
pinctrl-names = "default"; |
| 72 |
pinctrl-0 = <&mcbsp2_pins>; |
| 73 |
|
| 74 |
status = "okay"; |
| 75 |
}; |