| 1 |
// SPDX-License-Identifier: GPL-2.0-only |
| 2 |
/* |
| 3 |
* Copyright (C) 2015-2016 Paul Kocialkowski <[email protected]> |
| 4 |
*/ |
| 5 |
/dts-v1/; |
| 6 |
|
| 7 |
#include "omap36xx.dtsi" |
| 8 |
#include <dt-bindings/input/input.h> |
| 9 |
|
| 10 |
/ { |
| 11 |
model = "LG Optimus Black"; |
| 12 |
compatible = "lg,omap3-sniper", "ti,omap3630", "ti,omap3"; |
| 13 |
|
| 14 |
cpus { |
| 15 |
cpu@0 { |
| 16 |
cpu0-supply = <&vcc>; |
| 17 |
}; |
| 18 |
}; |
| 19 |
|
| 20 |
memory@80000000 { |
| 21 |
device_type = "memory"; |
| 22 |
reg = <0x80000000 0x20000000>; /* 512 MB */ |
| 23 |
}; |
| 24 |
}; |
| 25 |
|
| 26 |
&omap3_pmx_core { |
| 27 |
pinctrl-names = "default"; |
| 28 |
|
| 29 |
uart3_pins: uart3-pins { |
| 30 |
pinctrl-single,pins = < |
| 31 |
OMAP3_CORE1_IOPAD(0x219e, PIN_INPUT | MUX_MODE0) /* uart3_rx_irrx */ |
| 32 |
OMAP3_CORE1_IOPAD(0x21a0, PIN_OUTPUT | MUX_MODE0) /* uart3_tx_irtx */ |
| 33 |
>; |
| 34 |
}; |
| 35 |
|
| 36 |
dp3t_sel_pins: dp3t-sel-pins { |
| 37 |
pinctrl-single,pins = < |
| 38 |
OMAP3_CORE1_IOPAD(0x2196, PIN_OUTPUT | MUX_MODE4) /* gpio_161 */ |
| 39 |
OMAP3_CORE1_IOPAD(0x2198, PIN_OUTPUT | MUX_MODE4) /* gpio_162 */ |
| 40 |
>; |
| 41 |
}; |
| 42 |
|
| 43 |
i2c1_pins: i2c1-pins { |
| 44 |
pinctrl-single,pins = < |
| 45 |
OMAP3_CORE1_IOPAD(0x21ba, PIN_INPUT | MUX_MODE0) /* i2c1_scl */ |
| 46 |
OMAP3_CORE1_IOPAD(0x21bc, PIN_INPUT | MUX_MODE0) /* i2c1_sda */ |
| 47 |
>; |
| 48 |
}; |
| 49 |
|
| 50 |
i2c2_pins: i2c2-pins { |
| 51 |
pinctrl-single,pins = < |
| 52 |
OMAP3_CORE1_IOPAD(0x21be, PIN_INPUT | MUX_MODE0) /* i2c2_scl */ |
| 53 |
OMAP3_CORE1_IOPAD(0x21c0, PIN_INPUT | MUX_MODE0) /* i2c2_sda */ |
| 54 |
>; |
| 55 |
}; |
| 56 |
|
| 57 |
i2c3_pins: i2c3-pins { |
| 58 |
pinctrl-single,pins = < |
| 59 |
OMAP3_CORE1_IOPAD(0x21c2, PIN_INPUT | MUX_MODE0) /* i2c3_scl */ |
| 60 |
OMAP3_CORE1_IOPAD(0x21c4, PIN_INPUT | MUX_MODE0) /* i2c3_sda */ |
| 61 |
>; |
| 62 |
}; |
| 63 |
|
| 64 |
lp8720_en_pin: lp8720-en-pins { |
| 65 |
pinctrl-single,pins = < |
| 66 |
OMAP3_CORE1_IOPAD(0x2080, PIN_OUTPUT | MUX_MODE4) /* gpio_37 */ |
| 67 |
>; |
| 68 |
}; |
| 69 |
|
| 70 |
mmc1_pins: mmc1-pins { |
| 71 |
pinctrl-single,pins = < |
| 72 |
OMAP3_CORE1_IOPAD(0x2144, PIN_INPUT | MUX_MODE0) /* sdmmc1_clk */ |
| 73 |
OMAP3_CORE1_IOPAD(0x2146, PIN_INPUT | MUX_MODE0) /* sdmmc1_cmd */ |
| 74 |
OMAP3_CORE1_IOPAD(0x2148, PIN_INPUT | MUX_MODE0) /* sdmmc1_dat0 */ |
| 75 |
OMAP3_CORE1_IOPAD(0x214a, PIN_INPUT | MUX_MODE0) /* sdmmc1_dat1 */ |
| 76 |
OMAP3_CORE1_IOPAD(0x214c, PIN_INPUT | MUX_MODE0) /* sdmmc1_dat2 */ |
| 77 |
OMAP3_CORE1_IOPAD(0x214e, PIN_INPUT | MUX_MODE0) /* sdmmc1_dat3 */ |
| 78 |
>; |
| 79 |
}; |
| 80 |
|
| 81 |
mmc2_pins: mmc2-pins { |
| 82 |
pinctrl-single,pins = < |
| 83 |
OMAP3_CORE1_IOPAD(0x2158, PIN_INPUT | MUX_MODE0) /* sdmmc2_clk */ |
| 84 |
OMAP3_CORE1_IOPAD(0x215a, PIN_INPUT | MUX_MODE0) /* sdmmc2_cmd */ |
| 85 |
OMAP3_CORE1_IOPAD(0x215c, PIN_INPUT | MUX_MODE0) /* sdmmc2_dat0 */ |
| 86 |
OMAP3_CORE1_IOPAD(0x215e, PIN_INPUT | MUX_MODE0) /* sdmmc2_dat1 */ |
| 87 |
OMAP3_CORE1_IOPAD(0x2160, PIN_INPUT | MUX_MODE0) /* sdmmc2_dat2 */ |
| 88 |
OMAP3_CORE1_IOPAD(0x2162, PIN_INPUT | MUX_MODE0) /* sdmmc2_dat3 */ |
| 89 |
OMAP3_CORE1_IOPAD(0x2164, PIN_INPUT | MUX_MODE0) /* sdmmc2_dat4 */ |
| 90 |
OMAP3_CORE1_IOPAD(0x2166, PIN_INPUT | MUX_MODE0) /* sdmmc2_dat5 */ |
| 91 |
OMAP3_CORE1_IOPAD(0x2168, PIN_INPUT | MUX_MODE0) /* sdmmc2_dat6 */ |
| 92 |
OMAP3_CORE1_IOPAD(0x216a, PIN_INPUT | MUX_MODE0) /* sdmmc2_dat7 */ |
| 93 |
>; |
| 94 |
}; |
| 95 |
|
| 96 |
usb_otg_hs_pins: usb-otg-hs-pins { |
| 97 |
pinctrl-single,pins = < |
| 98 |
OMAP3_CORE1_IOPAD(0x21a2, PIN_INPUT | MUX_MODE0) /* hsusb0_clk */ |
| 99 |
OMAP3_CORE1_IOPAD(0x21a4, PIN_OUTPUT | MUX_MODE0) /* hsusb0_stp */ |
| 100 |
OMAP3_CORE1_IOPAD(0x21a6, PIN_INPUT | MUX_MODE0) /* hsusb0_dir */ |
| 101 |
OMAP3_CORE1_IOPAD(0x21a8, PIN_INPUT | MUX_MODE0) /* hsusb0_nxt */ |
| 102 |
OMAP3_CORE1_IOPAD(0x21aa, PIN_INPUT | MUX_MODE0) /* hsusb0_data0 */ |
| 103 |
OMAP3_CORE1_IOPAD(0x21ac, PIN_INPUT | MUX_MODE0) /* hsusb0_data1 */ |
| 104 |
OMAP3_CORE1_IOPAD(0x21ae, PIN_INPUT | MUX_MODE0) /* hsusb0_data2 */ |
| 105 |
OMAP3_CORE1_IOPAD(0x21b0, PIN_INPUT | MUX_MODE0) /* hsusb0_data3 */ |
| 106 |
OMAP3_CORE1_IOPAD(0x21b2, PIN_INPUT | MUX_MODE0) /* hsusb0_data4 */ |
| 107 |
OMAP3_CORE1_IOPAD(0x21b4, PIN_INPUT | MUX_MODE0) /* hsusb0_data5 */ |
| 108 |
OMAP3_CORE1_IOPAD(0x21b6, PIN_INPUT | MUX_MODE0) /* hsusb0_data6 */ |
| 109 |
OMAP3_CORE1_IOPAD(0x21b8, PIN_INPUT | MUX_MODE0) /* hsusb0_data7 */ |
| 110 |
>; |
| 111 |
}; |
| 112 |
}; |
| 113 |
|
| 114 |
&omap3_pmx_wkup { |
| 115 |
pinctrl-names = "default"; |
| 116 |
|
| 117 |
mmc1_cd_pin: mmc1-cd-pins { |
| 118 |
pinctrl-single,pins = < |
| 119 |
OMAP3_WKUP_IOPAD(0x2a1a, PIN_INPUT | MUX_MODE4) /* gpio_10 */ |
| 120 |
>; |
| 121 |
}; |
| 122 |
}; |
| 123 |
|
| 124 |
&gpio2 { |
| 125 |
ti,no-reset-on-init; |
| 126 |
}; |
| 127 |
|
| 128 |
&gpio5 { |
| 129 |
ti,no-reset-on-init; |
| 130 |
}; |
| 131 |
|
| 132 |
&gpio6 { |
| 133 |
ti,no-reset-on-init; |
| 134 |
}; |
| 135 |
|
| 136 |
&uart3 { |
| 137 |
pinctrl-names = "default"; |
| 138 |
pinctrl-0 = <&uart3_pins &dp3t_sel_pins>; |
| 139 |
|
| 140 |
interrupts-extended = <&intc 74 &omap3_pmx_core OMAP3_UART3_RX>; |
| 141 |
}; |
| 142 |
|
| 143 |
&i2c1 { |
| 144 |
pinctrl-names = "default"; |
| 145 |
pinctrl-0 = <&i2c1_pins>; |
| 146 |
|
| 147 |
clock-frequency = <2600000>; |
| 148 |
|
| 149 |
twl: twl@48 { |
| 150 |
reg = <0x48>; |
| 151 |
interrupts = <7>; /* SYS_NIRQ cascaded to intc */ |
| 152 |
interrupt-parent = <&intc>; |
| 153 |
|
| 154 |
power { |
| 155 |
compatible = "ti,twl4030-power"; |
| 156 |
ti,use_poweroff; |
| 157 |
}; |
| 158 |
}; |
| 159 |
}; |
| 160 |
|
| 161 |
&i2c2 { |
| 162 |
pinctrl-names = "default"; |
| 163 |
pinctrl-0 = <&i2c2_pins>; |
| 164 |
|
| 165 |
clock-frequency = <400000>; |
| 166 |
}; |
| 167 |
|
| 168 |
&i2c3 { |
| 169 |
pinctrl-names = "default"; |
| 170 |
pinctrl-0 = <&i2c3_pins>; |
| 171 |
|
| 172 |
clock-frequency = <400000>; |
| 173 |
|
| 174 |
lp8720@7d { |
| 175 |
pinctrl-names = "default"; |
| 176 |
pinctrl-0 = <&lp8720_en_pin>; |
| 177 |
|
| 178 |
compatible = "ti,lp8720"; |
| 179 |
reg = <0x7d>; |
| 180 |
|
| 181 |
enable-gpios = <&gpio2 5 GPIO_ACTIVE_HIGH>; /* gpio_37 */ |
| 182 |
|
| 183 |
lp8720_ldo1: ldo1 { |
| 184 |
regulator-min-microvolt = <3000000>; |
| 185 |
regulator-max-microvolt = <3000000>; |
| 186 |
}; |
| 187 |
}; |
| 188 |
}; |
| 189 |
|
| 190 |
&mmc1 { |
| 191 |
pinctrl-names = "default"; |
| 192 |
pinctrl-0 = <&mmc1_pins &mmc1_cd_pin>; |
| 193 |
|
| 194 |
vmmc-supply = <&lp8720_ldo1>; |
| 195 |
cd-gpios = <&gpio1 10 GPIO_ACTIVE_LOW>; /* gpio 10 */ |
| 196 |
bus-width = <4>; |
| 197 |
}; |
| 198 |
|
| 199 |
&mmc2 { |
| 200 |
pinctrl-names = "default"; |
| 201 |
pinctrl-0 = <&mmc2_pins>; |
| 202 |
|
| 203 |
vmmc-supply = <&vmmc2>; |
| 204 |
ti,non-removable; |
| 205 |
bus-width = <8>; |
| 206 |
}; |
| 207 |
|
| 208 |
&mmc3 { |
| 209 |
status = "disabled"; |
| 210 |
}; |
| 211 |
|
| 212 |
&usb_otg_hs { |
| 213 |
pinctrl-names = "default"; |
| 214 |
pinctrl-0 = <&usb_otg_hs_pins>; |
| 215 |
|
| 216 |
interface-type = <0>; |
| 217 |
usb-phy = <&usb2_phy>; |
| 218 |
phys = <&usb2_phy>; |
| 219 |
phy-names = "usb2-phy"; |
| 220 |
mode = <3>; |
| 221 |
power = <50>; |
| 222 |
}; |
| 223 |
|
| 224 |
#include "twl4030.dtsi" |
| 225 |
#include "twl4030_omap3.dtsi" |
| 226 |
|
| 227 |
&twl_keypad { |
| 228 |
linux,keymap = < |
| 229 |
MATRIX_KEY(0x00, 0x00, KEY_VOLUMEUP) |
| 230 |
MATRIX_KEY(0x01, 0x00, KEY_VOLUMEDOWN) |
| 231 |
MATRIX_KEY(0x02, 0x00, KEY_SELECT) |
| 232 |
>; |
| 233 |
}; |
| 234 |
|
| 235 |
/* |
| 236 |
* The TWL4030 VAUX2 and VDAC regulators power sensors that are slaves on I2C3. |
| 237 |
* When not powered, these sensors cause the I2C3 clock to stay low at all times, |
| 238 |
* making it impossible to reach other devices on I2C3. |
| 239 |
*/ |
| 240 |
|
| 241 |
&vaux2 { |
| 242 |
regulator-min-microvolt = <2800000>; |
| 243 |
regulator-max-microvolt = <2800000>; |
| 244 |
regulator-always-on; |
| 245 |
}; |
| 246 |
|
| 247 |
&vdac { |
| 248 |
regulator-min-microvolt = <1800000>; |
| 249 |
regulator-max-microvolt = <1800000>; |
| 250 |
regulator-always-on; |
| 251 |
}; |