Debian Codegraph @

arch/arm/boot/dts/ti/omap/omap36xx.dtsi

raw
1 // SPDX-License-Identifier: GPL-2.0-only
2 /*
3 * Device Tree Source for OMAP3 SoC
4 *
5 * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/
6 */
7
8 #include <dt-bindings/bus/ti-sysc.h>
9 #include <dt-bindings/media/omap3-isp.h>
10
11 #include "omap3.dtsi"
12
13 / {
14 aliases {
15 serial3 = &uart4;
16 };
17
18 cpus {
19 /* OMAP3630/OMAP37xx variants OPP50 to OPP130 and OPP1G */
20 cpu: cpu@0 {
21 operating-points-v2 = <&cpu0_opp_table>;
22
23 vbb-supply = <&abb_mpu_iva>;
24 clock-latency = <300000>; /* From omap-cpufreq driver */
25 #cooling-cells = <2>;
26 };
27 };
28
29 cpu0_opp_table: opp-table {
30 compatible = "operating-points-v2-ti-cpu";
31 syscon = <&scm_conf>;
32
33 opp-50-300000000 {
34 /* OPP50 */
35 opp-hz = /bits/ 64 <300000000>;
36 /*
37 * we currently only select the max voltage from table
38 * Table 4-19 of the DM3730 Data sheet (SPRS685B)
39 * Format is: cpu0-supply: <target min max>
40 * vbb-supply: <target min max>
41 */
42 opp-microvolt = <1012500 1012500 1012500>,
43 <1012500 1012500 1012500>;
44 /*
45 * first value is silicon revision bit mask
46 * second one is "speed binned" bit mask
47 */
48 opp-supported-hw = <0xffffffff 3>;
49 opp-suspend;
50 };
51
52 opp-100-600000000 {
53 /* OPP100 */
54 opp-hz = /bits/ 64 <600000000>;
55 opp-microvolt = <1200000 1200000 1200000>,
56 <1200000 1200000 1200000>;
57 opp-supported-hw = <0xffffffff 3>;
58 };
59
60 opp-130-800000000 {
61 /* OPP130 */
62 opp-hz = /bits/ 64 <800000000>;
63 opp-microvolt = <1325000 1325000 1325000>,
64 <1325000 1325000 1325000>;
65 opp-supported-hw = <0xffffffff 3>;
66 };
67
68 opp-1000000000 {
69 /* OPP1G */
70 opp-hz = /bits/ 64 <1000000000>;
71 opp-microvolt = <1375000 1375000 1375000>,
72 <1375000 1375000 1375000>;
73 /* only on am/dm37x with speed-binned bit set */
74 opp-supported-hw = <0xffffffff 2>;
75 turbo-mode;
76 };
77 };
78
79 opp_supply_mpu_iva: opp-supply {
80 compatible = "ti,omap-opp-supply";
81 ti,absolute-max-voltage-uv = <1375000>;
82 };
83
84 ocp@68000000 {
85 uart4: serial@49042000 {
86 compatible = "ti,omap3-uart";
87 reg = <0x49042000 0x400>;
88 interrupts = <80>;
89 dmas = <&sdma 81 &sdma 82>;
90 dma-names = "tx", "rx";
91 ti,hwmods = "uart4";
92 clock-frequency = <48000000>;
93 };
94
95 abb_mpu_iva: regulator-abb-mpu {
96 compatible = "ti,abb-v1";
97 regulator-name = "abb_mpu_iva";
98 #address-cells = <0>;
99 #size-cells = <0>;
100 reg = <0x483072f0 0x8>, <0x48306818 0x4>;
101 reg-names = "base-address", "int-address";
102 ti,tranxdone-status-mask = <0x4000000>;
103 clocks = <&sys_ck>;
104 ti,settling-time = <30>;
105 ti,clock-cycles = <8>;
106 ti,abb_info = <
107 /*uV ABB efuse rbb_m fbb_m vset_m*/
108 1012500 0 0 0 0 0
109 1200000 0 0 0 0 0
110 1325000 0 0 0 0 0
111 1375000 1 0 0 0 0
112 >;
113 };
114
115 omap3_pmx_core2: pinmux@480025a0 {
116 compatible = "ti,omap3-padconf", "pinctrl-single";
117 reg = <0x480025a0 0x5c>;
118 #address-cells = <1>;
119 #size-cells = <0>;
120 #pinctrl-cells = <1>;
121 #interrupt-cells = <1>;
122 interrupt-controller;
123 pinctrl-single,register-width = <16>;
124 pinctrl-single,function-mask = <0xff1f>;
125 };
126
127 isp: isp@480bc000 {
128 compatible = "ti,omap3-isp";
129 reg = <0x480bc000 0x12fc
130 0x480bd800 0x0600>;
131 interrupts = <24>;
132 iommus = <&mmu_isp>;
133 syscon = <&scm_conf 0x2f0>;
134 ti,phy-type = <OMAP3ISP_PHY_TYPE_CSIPHY>;
135 #clock-cells = <1>;
136 ports {
137 #address-cells = <1>;
138 #size-cells = <0>;
139 };
140 };
141
142 bandgap: bandgap@48002524 {
143 reg = <0x48002524 0x4>;
144 compatible = "ti,omap36xx-bandgap";
145 #thermal-sensor-cells = <0>;
146 };
147
148 target-module@480cb000 {
149 compatible = "ti,sysc-omap3630-sr", "ti,sysc";
150 ti,hwmods = "smartreflex_core";
151 reg = <0x480cb038 0x4>;
152 reg-names = "sysc";
153 ti,sysc-mask = <SYSC_OMAP3_SR_ENAWAKEUP>;
154 ti,sysc-sidle = <SYSC_IDLE_FORCE>,
155 <SYSC_IDLE_NO>,
156 <SYSC_IDLE_SMART>;
157 clocks = <&sr2_fck>;
158 clock-names = "fck";
159 #address-cells = <1>;
160 #size-cells = <1>;
161 ranges = <0 0x480cb000 0x001000>;
162
163 smartreflex_core: smartreflex@0 {
164 compatible = "ti,omap3-smartreflex-core";
165 reg = <0 0x400>;
166 interrupts = <19>;
167 };
168 };
169
170 target-module@480c9000 {
171 compatible = "ti,sysc-omap3630-sr", "ti,sysc";
172 ti,hwmods = "smartreflex_mpu_iva";
173 reg = <0x480c9038 0x4>;
174 reg-names = "sysc";
175 ti,sysc-mask = <SYSC_OMAP3_SR_ENAWAKEUP>;
176 ti,sysc-sidle = <SYSC_IDLE_FORCE>,
177 <SYSC_IDLE_NO>,
178 <SYSC_IDLE_SMART>;
179 clocks = <&sr1_fck>;
180 clock-names = "fck";
181 #address-cells = <1>;
182 #size-cells = <1>;
183 ranges = <0 0x480c9000 0x001000>;
184
185
186 smartreflex_mpu_iva: smartreflex@480c9000 {
187 compatible = "ti,omap3-smartreflex-mpu-iva";
188 reg = <0 0x400>;
189 interrupts = <18>;
190 };
191 };
192
193 /*
194 * Note that the sysconfig register layout is a subset of the
195 * "ti,sysc-omap4" type register with just sidle and midle bits
196 * available while omap34xx has "ti,sysc-omap2" type sysconfig.
197 */
198 sgx_module: target-module@50000000 {
199 compatible = "ti,sysc-omap4", "ti,sysc";
200 reg = <0x5000fe00 0x4>,
201 <0x5000fe10 0x4>;
202 reg-names = "rev", "sysc";
203 ti,sysc-midle = <SYSC_IDLE_FORCE>,
204 <SYSC_IDLE_NO>,
205 <SYSC_IDLE_SMART>;
206 ti,sysc-sidle = <SYSC_IDLE_FORCE>,
207 <SYSC_IDLE_NO>,
208 <SYSC_IDLE_SMART>;
209 clocks = <&sgx_fck>, <&sgx_ick>;
210 clock-names = "fck", "ick";
211 #address-cells = <1>;
212 #size-cells = <1>;
213 ranges = <0 0x50000000 0x2000000>;
214
215 gpu@0 {
216 compatible = "ti,omap3630-gpu", "img,powervr-sgx530";
217 reg = <0x0 0x2000000>; /* 32MB */
218 interrupts = <21>;
219 };
220 };
221 };
222
223 thermal_zones: thermal-zones {
224 #include "omap3-cpu-thermal.dtsi"
225 };
226 };
227
228 &sdma {
229 compatible = "ti,omap3630-sdma", "ti,omap-sdma";
230 };
231
232 /* OMAP3630 needs dss_96m_fck for VENC */
233 &venc {
234 clocks = <&dss_tv_fck>, <&dss_96m_fck>;
235 clock-names = "fck", "tv_dac_clk";
236 };
237
238 &ssi {
239 status = "okay";
240
241 clocks = <&ssi_ssr_fck>,
242 <&ssi_sst_fck>,
243 <&ssi_ick>;
244 clock-names = "ssi_ssr_fck",
245 "ssi_sst_fck",
246 "ssi_ick";
247 };
248
249 &usb_otg_target {
250 clocks = <&hsotgusb_ick_3430es2>;
251 };
252
253 /include/ "omap34xx-omap36xx-clocks.dtsi"
254 /include/ "omap36xx-omap3430es2plus-clocks.dtsi"
255 /include/ "omap36xx-am35xx-omap3430es2plus-clocks.dtsi"
256 /include/ "omap36xx-clocks.dtsi"