| 1 |
// SPDX-License-Identifier: GPL-2.0-only |
| 2 |
/* |
| 3 |
* Copyright (C) 2011 Texas Instruments Incorporated - https://www.ti.com/ |
| 4 |
*/ |
| 5 |
/dts-v1/; |
| 6 |
|
| 7 |
#include "omap443x.dtsi" |
| 8 |
#include "elpida_ecb240abacn.dtsi" |
| 9 |
#include "omap4-mcpdm.dtsi" |
| 10 |
|
| 11 |
/ { |
| 12 |
model = "TI OMAP4 SDP board"; |
| 13 |
compatible = "ti,omap4-sdp", "ti,omap4430", "ti,omap4"; |
| 14 |
|
| 15 |
memory@80000000 { |
| 16 |
device_type = "memory"; |
| 17 |
reg = <0x80000000 0x40000000>; /* 1 GB */ |
| 18 |
}; |
| 19 |
|
| 20 |
aliases { |
| 21 |
display0 = &lcd0; |
| 22 |
display1 = &lcd1; |
| 23 |
display2 = &hdmi0; |
| 24 |
}; |
| 25 |
|
| 26 |
vdd_eth: fixedregulator-vdd-eth { |
| 27 |
pinctrl-names = "default"; |
| 28 |
pinctrl-0 = <&enet_enable_gpio>; |
| 29 |
|
| 30 |
compatible = "regulator-fixed"; |
| 31 |
regulator-name = "VDD_ETH"; |
| 32 |
regulator-min-microvolt = <3300000>; |
| 33 |
regulator-max-microvolt = <3300000>; |
| 34 |
gpio = <&gpio2 16 GPIO_ACTIVE_HIGH>; /* gpio line 48 */ |
| 35 |
enable-active-high; |
| 36 |
regulator-boot-on; |
| 37 |
startup-delay-us = <25000>; |
| 38 |
}; |
| 39 |
|
| 40 |
vbat: fixedregulator-vbat { |
| 41 |
compatible = "regulator-fixed"; |
| 42 |
regulator-name = "VBAT"; |
| 43 |
regulator-min-microvolt = <3750000>; |
| 44 |
regulator-max-microvolt = <3750000>; |
| 45 |
regulator-boot-on; |
| 46 |
}; |
| 47 |
|
| 48 |
led-controller-1 { |
| 49 |
compatible = "gpio-leds"; |
| 50 |
|
| 51 |
led-1 { |
| 52 |
label = "omap4:green:debug0"; |
| 53 |
gpios = <&gpio2 29 GPIO_ACTIVE_HIGH>; /* 61 */ |
| 54 |
}; |
| 55 |
|
| 56 |
led-2 { |
| 57 |
label = "omap4:green:debug1"; |
| 58 |
gpios = <&gpio1 30 GPIO_ACTIVE_HIGH>; /* 30 */ |
| 59 |
}; |
| 60 |
|
| 61 |
led-3 { |
| 62 |
label = "omap4:green:debug2"; |
| 63 |
gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>; /* 7 */ |
| 64 |
}; |
| 65 |
|
| 66 |
led-4 { |
| 67 |
label = "omap4:green:debug3"; |
| 68 |
gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>; /* 8 */ |
| 69 |
}; |
| 70 |
|
| 71 |
led-5 { |
| 72 |
label = "omap4:green:debug4"; |
| 73 |
gpios = <&gpio2 18 GPIO_ACTIVE_HIGH>; /* 50 */ |
| 74 |
}; |
| 75 |
|
| 76 |
led-6 { |
| 77 |
label = "omap4:blue:user"; |
| 78 |
gpios = <&gpio6 9 GPIO_ACTIVE_HIGH>; /* 169 */ |
| 79 |
}; |
| 80 |
|
| 81 |
led-7 { |
| 82 |
label = "omap4:red:user"; |
| 83 |
gpios = <&gpio6 10 GPIO_ACTIVE_HIGH>; /* 170 */ |
| 84 |
}; |
| 85 |
|
| 86 |
led-8 { |
| 87 |
label = "omap4:green:user"; |
| 88 |
gpios = <&gpio5 11 GPIO_ACTIVE_HIGH>; /* 139 */ |
| 89 |
}; |
| 90 |
}; |
| 91 |
|
| 92 |
led-controller-2 { |
| 93 |
compatible = "pwm-leds"; |
| 94 |
|
| 95 |
led-9 { |
| 96 |
label = "omap4::keypad"; |
| 97 |
pwms = <&twl_pwm 0 7812500>; |
| 98 |
max-brightness = <127>; |
| 99 |
}; |
| 100 |
|
| 101 |
led-10 { |
| 102 |
label = "omap4:green:chrg"; |
| 103 |
pwms = <&twl_pwmled 0 7812500>; |
| 104 |
max-brightness = <255>; |
| 105 |
}; |
| 106 |
}; |
| 107 |
|
| 108 |
backlight { |
| 109 |
compatible = "pwm-backlight"; |
| 110 |
pwms = <&twl_pwm 1 7812500>; |
| 111 |
brightness-levels = < |
| 112 |
0 10 20 30 40 |
| 113 |
50 60 70 80 90 |
| 114 |
100 110 120 127 |
| 115 |
>; |
| 116 |
default-brightness-level = <13>; |
| 117 |
}; |
| 118 |
|
| 119 |
sound { |
| 120 |
compatible = "ti,abe-twl6040"; |
| 121 |
ti,model = "SDP4430"; |
| 122 |
|
| 123 |
ti,jack-detection = <1>; |
| 124 |
ti,mclk-freq = <38400000>; |
| 125 |
|
| 126 |
ti,mcpdm = <&mcpdm>; |
| 127 |
ti,dmic = <&dmic>; |
| 128 |
|
| 129 |
ti,twl6040 = <&twl6040>; |
| 130 |
|
| 131 |
/* Audio routing */ |
| 132 |
ti,audio-routing = |
| 133 |
"Headset Stereophone", "HSOL", |
| 134 |
"Headset Stereophone", "HSOR", |
| 135 |
"Earphone Spk", "EP", |
| 136 |
"Ext Spk", "HFL", |
| 137 |
"Ext Spk", "HFR", |
| 138 |
"Line Out", "AUXL", |
| 139 |
"Line Out", "AUXR", |
| 140 |
"Vibrator", "VIBRAL", |
| 141 |
"Vibrator", "VIBRAR", |
| 142 |
"HSMIC", "Headset Mic", |
| 143 |
"Headset Mic", "Headset Mic Bias", |
| 144 |
"MAINMIC", "Main Handset Mic", |
| 145 |
"Main Handset Mic", "Main Mic Bias", |
| 146 |
"SUBMIC", "Sub Handset Mic", |
| 147 |
"Sub Handset Mic", "Main Mic Bias", |
| 148 |
"AFML", "Line In", |
| 149 |
"AFMR", "Line In", |
| 150 |
"DMic", "Digital Mic", |
| 151 |
"Digital Mic", "Digital Mic1 Bias"; |
| 152 |
}; |
| 153 |
|
| 154 |
/* regulator for wl12xx on sdio5 */ |
| 155 |
wl12xx_vmmc: wl12xx_vmmc { |
| 156 |
pinctrl-names = "default"; |
| 157 |
pinctrl-0 = <&wl12xx_gpio>; |
| 158 |
compatible = "regulator-fixed"; |
| 159 |
regulator-name = "vwl1271"; |
| 160 |
regulator-min-microvolt = <1800000>; |
| 161 |
regulator-max-microvolt = <1800000>; |
| 162 |
gpio = <&gpio2 22 GPIO_ACTIVE_HIGH>; |
| 163 |
startup-delay-us = <70000>; |
| 164 |
enable-active-high; |
| 165 |
}; |
| 166 |
|
| 167 |
tpd12s015: encoder { |
| 168 |
compatible = "ti,tpd12s015"; |
| 169 |
|
| 170 |
gpios = <&gpio2 28 GPIO_ACTIVE_HIGH>, /* 60, CT CP HPD */ |
| 171 |
<&gpio2 9 GPIO_ACTIVE_HIGH>, /* 41, LS OE */ |
| 172 |
<&gpio2 31 GPIO_ACTIVE_HIGH>; /* 63, HPD */ |
| 173 |
|
| 174 |
ports { |
| 175 |
#address-cells = <1>; |
| 176 |
#size-cells = <0>; |
| 177 |
|
| 178 |
port@0 { |
| 179 |
reg = <0>; |
| 180 |
|
| 181 |
tpd12s015_in: endpoint { |
| 182 |
remote-endpoint = <&hdmi_out>; |
| 183 |
}; |
| 184 |
}; |
| 185 |
|
| 186 |
port@1 { |
| 187 |
reg = <1>; |
| 188 |
|
| 189 |
tpd12s015_out: endpoint { |
| 190 |
remote-endpoint = <&hdmi_connector_in>; |
| 191 |
}; |
| 192 |
}; |
| 193 |
}; |
| 194 |
}; |
| 195 |
|
| 196 |
hdmi0: connector { |
| 197 |
compatible = "hdmi-connector"; |
| 198 |
label = "hdmi"; |
| 199 |
|
| 200 |
type = "c"; |
| 201 |
|
| 202 |
port { |
| 203 |
hdmi_connector_in: endpoint { |
| 204 |
remote-endpoint = <&tpd12s015_out>; |
| 205 |
}; |
| 206 |
}; |
| 207 |
}; |
| 208 |
}; |
| 209 |
|
| 210 |
&omap4_pmx_core { |
| 211 |
pinctrl-names = "default"; |
| 212 |
pinctrl-0 = < |
| 213 |
&dss_hdmi_pins |
| 214 |
&tpd12s015_pins |
| 215 |
>; |
| 216 |
|
| 217 |
uart2_pins: uart2-pins { |
| 218 |
pinctrl-single,pins = < |
| 219 |
OMAP4_IOPAD(0x118, PIN_INPUT_PULLUP | MUX_MODE0) /* uart2_cts.uart2_cts */ |
| 220 |
OMAP4_IOPAD(0x11a, PIN_OUTPUT | MUX_MODE0) /* uart2_rts.uart2_rts */ |
| 221 |
OMAP4_IOPAD(0x11c, PIN_INPUT_PULLUP | MUX_MODE0) /* uart2_rx.uart2_rx */ |
| 222 |
OMAP4_IOPAD(0x11e, PIN_OUTPUT | MUX_MODE0) /* uart2_tx.uart2_tx */ |
| 223 |
>; |
| 224 |
}; |
| 225 |
|
| 226 |
uart3_pins: uart3-pins { |
| 227 |
pinctrl-single,pins = < |
| 228 |
OMAP4_IOPAD(0x140, PIN_INPUT_PULLUP | MUX_MODE0) /* uart3_cts_rctx.uart3_cts_rctx */ |
| 229 |
OMAP4_IOPAD(0x142, PIN_OUTPUT | MUX_MODE0) /* uart3_rts_sd.uart3_rts_sd */ |
| 230 |
OMAP4_IOPAD(0x144, PIN_INPUT | MUX_MODE0) /* uart3_rx_irrx.uart3_rx_irrx */ |
| 231 |
OMAP4_IOPAD(0x146, PIN_OUTPUT | MUX_MODE0) /* uart3_tx_irtx.uart3_tx_irtx */ |
| 232 |
>; |
| 233 |
}; |
| 234 |
|
| 235 |
uart4_pins: uart4-pins { |
| 236 |
pinctrl-single,pins = < |
| 237 |
OMAP4_IOPAD(0x15c, PIN_INPUT | MUX_MODE0) /* uart4_rx.uart4_rx */ |
| 238 |
OMAP4_IOPAD(0x15e, PIN_OUTPUT | MUX_MODE0) /* uart4_tx.uart4_tx */ |
| 239 |
>; |
| 240 |
}; |
| 241 |
|
| 242 |
twl6040_pins: twl6040-pins { |
| 243 |
pinctrl-single,pins = < |
| 244 |
OMAP4_IOPAD(0x120, PIN_OUTPUT | MUX_MODE3) /* hdq_sio.gpio_127 */ |
| 245 |
OMAP4_IOPAD(0x1a0, PIN_INPUT | MUX_MODE0) /* sys_nirq2.sys_nirq2 */ |
| 246 |
>; |
| 247 |
}; |
| 248 |
|
| 249 |
dmic_pins: dmic-pins { |
| 250 |
pinctrl-single,pins = < |
| 251 |
OMAP4_IOPAD(0x110, PIN_OUTPUT | MUX_MODE0) /* abe_dmic_clk1.abe_dmic_clk1 */ |
| 252 |
OMAP4_IOPAD(0x112, PIN_INPUT | MUX_MODE0) /* abe_dmic_din1.abe_dmic_din1 */ |
| 253 |
OMAP4_IOPAD(0x114, PIN_INPUT | MUX_MODE0) /* abe_dmic_din2.abe_dmic_din2 */ |
| 254 |
OMAP4_IOPAD(0x116, PIN_INPUT | MUX_MODE0) /* abe_dmic_din3.abe_dmic_din3 */ |
| 255 |
>; |
| 256 |
}; |
| 257 |
|
| 258 |
mcbsp1_pins: mcbsp1-pins { |
| 259 |
pinctrl-single,pins = < |
| 260 |
OMAP4_IOPAD(0x0fe, PIN_INPUT | MUX_MODE0) /* abe_mcbsp1_clkx.abe_mcbsp1_clkx */ |
| 261 |
OMAP4_IOPAD(0x100, PIN_INPUT_PULLDOWN | MUX_MODE0) /* abe_mcbsp1_dr.abe_mcbsp1_dr */ |
| 262 |
OMAP4_IOPAD(0x102, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* abe_mcbsp1_dx.abe_mcbsp1_dx */ |
| 263 |
OMAP4_IOPAD(0x104, PIN_INPUT | MUX_MODE0) /* abe_mcbsp1_fsx.abe_mcbsp1_fsx */ |
| 264 |
>; |
| 265 |
}; |
| 266 |
|
| 267 |
mcbsp2_pins: mcbsp2-pins { |
| 268 |
pinctrl-single,pins = < |
| 269 |
OMAP4_IOPAD(0x0f6, PIN_INPUT | MUX_MODE0) /* abe_mcbsp2_clkx.abe_mcbsp2_clkx */ |
| 270 |
OMAP4_IOPAD(0x0f8, PIN_INPUT_PULLDOWN | MUX_MODE0) /* abe_mcbsp2_dr.abe_mcbsp2_dr */ |
| 271 |
OMAP4_IOPAD(0x0fa, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* abe_mcbsp2_dx.abe_mcbsp2_dx */ |
| 272 |
OMAP4_IOPAD(0x0fc, PIN_INPUT | MUX_MODE0) /* abe_mcbsp2_fsx.abe_mcbsp2_fsx */ |
| 273 |
>; |
| 274 |
}; |
| 275 |
|
| 276 |
mcspi1_pins: mcspi1-pins { |
| 277 |
pinctrl-single,pins = < |
| 278 |
OMAP4_IOPAD(0x132, PIN_INPUT | MUX_MODE0) /* mcspi1_clk.mcspi1_clk */ |
| 279 |
OMAP4_IOPAD(0x134, PIN_INPUT | MUX_MODE0) /* mcspi1_somi.mcspi1_somi */ |
| 280 |
OMAP4_IOPAD(0x136, PIN_INPUT | MUX_MODE0) /* mcspi1_simo.mcspi1_simo */ |
| 281 |
OMAP4_IOPAD(0x138, PIN_INPUT | MUX_MODE0) /* mcspi1_cs0.mcspi1_cs0 */ |
| 282 |
>; |
| 283 |
}; |
| 284 |
|
| 285 |
dss_hdmi_pins: dss-hdmi-pins { |
| 286 |
pinctrl-single,pins = < |
| 287 |
OMAP4_IOPAD(0x09a, PIN_INPUT | MUX_MODE0) /* hdmi_cec.hdmi_cec */ |
| 288 |
OMAP4_IOPAD(0x09c, PIN_INPUT_PULLUP | MUX_MODE0) /* hdmi_scl.hdmi_scl */ |
| 289 |
OMAP4_IOPAD(0x09e, PIN_INPUT_PULLUP | MUX_MODE0) /* hdmi_sda.hdmi_sda */ |
| 290 |
>; |
| 291 |
}; |
| 292 |
|
| 293 |
tpd12s015_pins: tpd12s015-pins { |
| 294 |
pinctrl-single,pins = < |
| 295 |
OMAP4_IOPAD(0x062, PIN_OUTPUT | MUX_MODE3) /* gpmc_a17.gpio_41 */ |
| 296 |
OMAP4_IOPAD(0x088, PIN_OUTPUT | MUX_MODE3) /* gpmc_nbe1.gpio_60 */ |
| 297 |
OMAP4_IOPAD(0x098, PIN_INPUT_PULLDOWN | MUX_MODE3) /* hdmi_hpd.gpio_63 */ |
| 298 |
>; |
| 299 |
}; |
| 300 |
|
| 301 |
i2c1_pins: i2c1-pins { |
| 302 |
pinctrl-single,pins = < |
| 303 |
OMAP4_IOPAD(0x122, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_scl */ |
| 304 |
OMAP4_IOPAD(0x124, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_sda */ |
| 305 |
>; |
| 306 |
}; |
| 307 |
|
| 308 |
i2c2_pins: i2c2-pins { |
| 309 |
pinctrl-single,pins = < |
| 310 |
OMAP4_IOPAD(0x126, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c2_scl */ |
| 311 |
OMAP4_IOPAD(0x128, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c2_sda */ |
| 312 |
>; |
| 313 |
}; |
| 314 |
|
| 315 |
i2c3_pins: i2c3-pins { |
| 316 |
pinctrl-single,pins = < |
| 317 |
OMAP4_IOPAD(0x12a, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c3_scl */ |
| 318 |
OMAP4_IOPAD(0x12c, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c3_sda */ |
| 319 |
>; |
| 320 |
}; |
| 321 |
|
| 322 |
i2c4_pins: i2c4-pins { |
| 323 |
pinctrl-single,pins = < |
| 324 |
OMAP4_IOPAD(0x12e, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c4_scl */ |
| 325 |
OMAP4_IOPAD(0x130, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c4_sda */ |
| 326 |
>; |
| 327 |
}; |
| 328 |
|
| 329 |
/* wl12xx GPIO output for WLAN_EN */ |
| 330 |
wl12xx_gpio: wl12xx-gpio-pins { |
| 331 |
pinctrl-single,pins = < |
| 332 |
OMAP4_IOPAD(0x07c, PIN_OUTPUT | MUX_MODE3) /* gpmc_nwp.gpio_54 */ |
| 333 |
>; |
| 334 |
}; |
| 335 |
|
| 336 |
/* wl12xx GPIO inputs and SDIO pins */ |
| 337 |
wl12xx_pins: wl12xx-pins { |
| 338 |
pinctrl-single,pins = < |
| 339 |
OMAP4_IOPAD(0x07a, PIN_INPUT | MUX_MODE3) /* gpmc_ncs3.gpio_53 */ |
| 340 |
OMAP4_IOPAD(0x148, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_clk.sdmmc5_clk */ |
| 341 |
OMAP4_IOPAD(0x14a, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_cmd.sdmmc5_cmd */ |
| 342 |
OMAP4_IOPAD(0x14c, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_dat0.sdmmc5_dat0 */ |
| 343 |
OMAP4_IOPAD(0x14e, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_dat1.sdmmc5_dat1 */ |
| 344 |
OMAP4_IOPAD(0x150, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_dat2.sdmmc5_dat2 */ |
| 345 |
OMAP4_IOPAD(0x152, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_dat3.sdmmc5_dat3 */ |
| 346 |
>; |
| 347 |
}; |
| 348 |
|
| 349 |
/* gpio_48 for ENET_ENABLE */ |
| 350 |
enet_enable_gpio: enet-enable-gpio-pins { |
| 351 |
pinctrl-single,pins = < |
| 352 |
OMAP4_IOPAD(0x070, PIN_OUTPUT_PULLDOWN | MUX_MODE3) /* gpmc_a24.gpio_48 */ |
| 353 |
>; |
| 354 |
}; |
| 355 |
|
| 356 |
ks8851_pins: ks8851-pins { |
| 357 |
pinctrl-single,pins = < |
| 358 |
/* ENET_INT */ |
| 359 |
OMAP4_IOPAD(0x054, PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_ad10.gpio_34 */ |
| 360 |
/* |
| 361 |
* Misterious pin which makes the ethernet working |
| 362 |
* The legacy board file requested this pin on boot |
| 363 |
* (ETH_KS8851_QUART) and set it to high, similarly to |
| 364 |
* the ENET_ENABLE pin. |
| 365 |
* We could use gpio-hog to keep it high, but let's use |
| 366 |
* it as a reset GPIO for ks8851. |
| 367 |
*/ |
| 368 |
OMAP4_IOPAD(0x13a, PIN_OUTPUT_PULLUP | MUX_MODE3) /* mcspi1_cs1.gpio_138 */ |
| 369 |
>; |
| 370 |
}; |
| 371 |
}; |
| 372 |
|
| 373 |
&i2c1 { |
| 374 |
pinctrl-names = "default"; |
| 375 |
pinctrl-0 = <&i2c1_pins>; |
| 376 |
|
| 377 |
clock-frequency = <400000>; |
| 378 |
|
| 379 |
twl: twl@48 { |
| 380 |
reg = <0x48>; |
| 381 |
/* SPI = 0, IRQ# = 7, 4 = active high level-sensitive */ |
| 382 |
interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; /* IRQ_SYS_1N cascaded to gic */ |
| 383 |
}; |
| 384 |
|
| 385 |
twl6040: twl@4b { |
| 386 |
compatible = "ti,twl6040"; |
| 387 |
#clock-cells = <0>; |
| 388 |
reg = <0x4b>; |
| 389 |
|
| 390 |
pinctrl-names = "default"; |
| 391 |
pinctrl-0 = <&twl6040_pins>; |
| 392 |
|
| 393 |
/* SPI = 0, IRQ# = 119, 4 = active high level-sensitive */ |
| 394 |
interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>; /* IRQ_SYS_2N cascaded to gic */ |
| 395 |
ti,audpwron-gpio = <&gpio4 31 GPIO_ACTIVE_HIGH>; /* gpio line 127 */ |
| 396 |
|
| 397 |
vio-supply = <&v1v8>; |
| 398 |
v2v1-supply = <&v2v1>; |
| 399 |
enable-active-high; |
| 400 |
|
| 401 |
/* regulators for vibra motor */ |
| 402 |
vddvibl-supply = <&vbat>; |
| 403 |
vddvibr-supply = <&vbat>; |
| 404 |
|
| 405 |
vibra { |
| 406 |
/* Vibra driver, motor resistance parameters */ |
| 407 |
ti,vibldrv-res = <8>; |
| 408 |
ti,vibrdrv-res = <3>; |
| 409 |
ti,viblmotor-res = <10>; |
| 410 |
ti,vibrmotor-res = <10>; |
| 411 |
}; |
| 412 |
}; |
| 413 |
}; |
| 414 |
|
| 415 |
#include "twl6030.dtsi" |
| 416 |
#include "twl6030_omap4.dtsi" |
| 417 |
|
| 418 |
&i2c2 { |
| 419 |
pinctrl-names = "default"; |
| 420 |
pinctrl-0 = <&i2c2_pins>; |
| 421 |
|
| 422 |
clock-frequency = <400000>; |
| 423 |
}; |
| 424 |
|
| 425 |
&i2c3 { |
| 426 |
pinctrl-names = "default"; |
| 427 |
pinctrl-0 = <&i2c3_pins>; |
| 428 |
|
| 429 |
clock-frequency = <400000>; |
| 430 |
|
| 431 |
/* |
| 432 |
* Temperature Sensor |
| 433 |
* https://www.ti.com/lit/ds/symlink/tmp105.pdf |
| 434 |
*/ |
| 435 |
tmp105@48 { |
| 436 |
compatible = "ti,tmp105"; |
| 437 |
reg = <0x48>; |
| 438 |
}; |
| 439 |
|
| 440 |
/* |
| 441 |
* Ambient Light Sensor |
| 442 |
* https://www.rohm.com/products/databook/sensor/pdf/bh1780gli-e.pdf (defunct) |
| 443 |
*/ |
| 444 |
bh1780@29 { |
| 445 |
compatible = "rohm,bh1780"; |
| 446 |
reg = <0x29>; |
| 447 |
}; |
| 448 |
}; |
| 449 |
|
| 450 |
&i2c4 { |
| 451 |
pinctrl-names = "default"; |
| 452 |
pinctrl-0 = <&i2c4_pins>; |
| 453 |
|
| 454 |
clock-frequency = <400000>; |
| 455 |
|
| 456 |
/* |
| 457 |
* 3-Axis Digital Compass |
| 458 |
* https://www.sparkfun.com/datasheets/Sensors/Magneto/HMC5843.pdf |
| 459 |
*/ |
| 460 |
hmc5843@1e { |
| 461 |
compatible = "honeywell,hmc5843"; |
| 462 |
reg = <0x1e>; |
| 463 |
}; |
| 464 |
}; |
| 465 |
|
| 466 |
&mcspi1 { |
| 467 |
pinctrl-names = "default"; |
| 468 |
pinctrl-0 = <&mcspi1_pins>; |
| 469 |
|
| 470 |
ethernet@0 { |
| 471 |
pinctrl-names = "default"; |
| 472 |
pinctrl-0 = <&ks8851_pins>; |
| 473 |
|
| 474 |
compatible = "ks8851"; |
| 475 |
spi-max-frequency = <24000000>; |
| 476 |
reg = <0>; |
| 477 |
interrupt-parent = <&gpio2>; |
| 478 |
interrupts = <2 IRQ_TYPE_LEVEL_LOW>; /* gpio line 34 */ |
| 479 |
vdd-supply = <&vdd_eth>; |
| 480 |
reset-gpios = <&gpio5 10 GPIO_ACTIVE_HIGH>; |
| 481 |
}; |
| 482 |
}; |
| 483 |
|
| 484 |
&mmc1 { |
| 485 |
vmmc-supply = <&vmmc>; |
| 486 |
bus-width = <8>; |
| 487 |
}; |
| 488 |
|
| 489 |
&mmc2 { |
| 490 |
vmmc-supply = <&vaux1>; |
| 491 |
bus-width = <8>; |
| 492 |
ti,non-removable; |
| 493 |
}; |
| 494 |
|
| 495 |
&mmc3 { |
| 496 |
status = "disabled"; |
| 497 |
}; |
| 498 |
|
| 499 |
&mmc4 { |
| 500 |
status = "disabled"; |
| 501 |
}; |
| 502 |
|
| 503 |
&mmc5 { |
| 504 |
pinctrl-names = "default"; |
| 505 |
pinctrl-0 = <&wl12xx_pins>; |
| 506 |
vmmc-supply = <&wl12xx_vmmc>; |
| 507 |
non-removable; |
| 508 |
bus-width = <4>; |
| 509 |
cap-power-off-card; |
| 510 |
|
| 511 |
#address-cells = <1>; |
| 512 |
#size-cells = <0>; |
| 513 |
wlcore: wlcore@2 { |
| 514 |
compatible = "ti,wl1281"; |
| 515 |
reg = <2>; |
| 516 |
interrupt-parent = <&gpio1>; |
| 517 |
interrupts = <21 IRQ_TYPE_LEVEL_HIGH>; /* gpio 53 */ |
| 518 |
ref-clock-frequency = <26000000>; |
| 519 |
tcxo-clock-frequency = <26000000>; |
| 520 |
}; |
| 521 |
}; |
| 522 |
|
| 523 |
&emif1 { |
| 524 |
cs1-used; |
| 525 |
device-handle = <&elpida_ECB240ABACN>; |
| 526 |
}; |
| 527 |
|
| 528 |
&emif2 { |
| 529 |
cs1-used; |
| 530 |
device-handle = <&elpida_ECB240ABACN>; |
| 531 |
}; |
| 532 |
|
| 533 |
&keypad { |
| 534 |
keypad,num-rows = <8>; |
| 535 |
keypad,num-columns = <8>; |
| 536 |
linux,keymap = <0x00000012 /* KEY_E */ |
| 537 |
0x00010013 /* KEY_R */ |
| 538 |
0x00020014 /* KEY_T */ |
| 539 |
0x00030066 /* KEY_HOME */ |
| 540 |
0x0004003f /* KEY_F5 */ |
| 541 |
0x000500f0 /* KEY_UNKNOWN */ |
| 542 |
0x00060017 /* KEY_I */ |
| 543 |
0x0007002a /* KEY_LEFTSHIFT */ |
| 544 |
0x01000020 /* KEY_D*/ |
| 545 |
0x01010021 /* KEY_F */ |
| 546 |
0x01020022 /* KEY_G */ |
| 547 |
0x010300e7 /* KEY_SEND */ |
| 548 |
0x01040040 /* KEY_F6 */ |
| 549 |
0x010500f0 /* KEY_UNKNOWN */ |
| 550 |
0x01060025 /* KEY_K */ |
| 551 |
0x0107001c /* KEY_ENTER */ |
| 552 |
0x0200002d /* KEY_X */ |
| 553 |
0x0201002e /* KEY_C */ |
| 554 |
0x0202002f /* KEY_V */ |
| 555 |
0x0203006b /* KEY_END */ |
| 556 |
0x02040041 /* KEY_F7 */ |
| 557 |
0x020500f0 /* KEY_UNKNOWN */ |
| 558 |
0x02060034 /* KEY_DOT */ |
| 559 |
0x0207003a /* KEY_CAPSLOCK */ |
| 560 |
0x0300002c /* KEY_Z */ |
| 561 |
0x0301004e /* KEY_KPLUS */ |
| 562 |
0x03020030 /* KEY_B */ |
| 563 |
0x0303003b /* KEY_F1 */ |
| 564 |
0x03040042 /* KEY_F8 */ |
| 565 |
0x030500f0 /* KEY_UNKNOWN */ |
| 566 |
0x03060018 /* KEY_O */ |
| 567 |
0x03070039 /* KEY_SPACE */ |
| 568 |
0x04000011 /* KEY_W */ |
| 569 |
0x04010015 /* KEY_Y */ |
| 570 |
0x04020016 /* KEY_U */ |
| 571 |
0x0403003c /* KEY_F2 */ |
| 572 |
0x04040073 /* KEY_VOLUMEUP */ |
| 573 |
0x040500f0 /* KEY_UNKNOWN */ |
| 574 |
0x04060026 /* KEY_L */ |
| 575 |
0x04070069 /* KEY_LEFT */ |
| 576 |
0x0500001f /* KEY_S */ |
| 577 |
0x05010023 /* KEY_H */ |
| 578 |
0x05020024 /* KEY_J */ |
| 579 |
0x0503003d /* KEY_F3 */ |
| 580 |
0x05040043 /* KEY_F9 */ |
| 581 |
0x05050072 /* KEY_VOLUMEDOWN */ |
| 582 |
0x05060032 /* KEY_M */ |
| 583 |
0x0507006a /* KEY_RIGHT */ |
| 584 |
0x06000010 /* KEY_Q */ |
| 585 |
0x0601001e /* KEY_A */ |
| 586 |
0x06020031 /* KEY_N */ |
| 587 |
0x0603009e /* KEY_BACK */ |
| 588 |
0x0604000e /* KEY_BACKSPACE */ |
| 589 |
0x060500f0 /* KEY_UNKNOWN */ |
| 590 |
0x06060019 /* KEY_P */ |
| 591 |
0x06070067 /* KEY_UP */ |
| 592 |
0x07000094 /* KEY_PROG1 */ |
| 593 |
0x07010095 /* KEY_PROG2 */ |
| 594 |
0x070200ca /* KEY_PROG3 */ |
| 595 |
0x070300cb /* KEY_PROG4 */ |
| 596 |
0x0704003e /* KEY_F4 */ |
| 597 |
0x070500f0 /* KEY_UNKNOWN */ |
| 598 |
0x07060160 /* KEY_OK */ |
| 599 |
0x0707006c>; /* KEY_DOWN */ |
| 600 |
linux,input-no-autorepeat; |
| 601 |
}; |
| 602 |
|
| 603 |
&uart2 { |
| 604 |
interrupts-extended = <&wakeupgen GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH |
| 605 |
&omap4_pmx_core OMAP4_UART2_RX>; |
| 606 |
pinctrl-names = "default"; |
| 607 |
pinctrl-0 = <&uart2_pins>; |
| 608 |
}; |
| 609 |
|
| 610 |
&uart3 { |
| 611 |
interrupts-extended = <&wakeupgen GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH |
| 612 |
&omap4_pmx_core OMAP4_UART3_RX>; |
| 613 |
pinctrl-names = "default"; |
| 614 |
pinctrl-0 = <&uart3_pins>; |
| 615 |
}; |
| 616 |
|
| 617 |
&uart4 { |
| 618 |
interrupts-extended = <&wakeupgen GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH |
| 619 |
&omap4_pmx_core OMAP4_UART4_RX>; |
| 620 |
pinctrl-names = "default"; |
| 621 |
pinctrl-0 = <&uart4_pins>; |
| 622 |
}; |
| 623 |
|
| 624 |
&mcbsp1 { |
| 625 |
pinctrl-names = "default"; |
| 626 |
pinctrl-0 = <&mcbsp1_pins>; |
| 627 |
status = "okay"; |
| 628 |
}; |
| 629 |
|
| 630 |
&mcbsp2 { |
| 631 |
pinctrl-names = "default"; |
| 632 |
pinctrl-0 = <&mcbsp2_pins>; |
| 633 |
status = "okay"; |
| 634 |
}; |
| 635 |
|
| 636 |
&dmic { |
| 637 |
pinctrl-names = "default"; |
| 638 |
pinctrl-0 = <&dmic_pins>; |
| 639 |
status = "okay"; |
| 640 |
}; |
| 641 |
|
| 642 |
&twl_usb_comparator { |
| 643 |
usb-supply = <&vusb>; |
| 644 |
}; |
| 645 |
|
| 646 |
&usb_otg_hs { |
| 647 |
interface-type = <1>; |
| 648 |
mode = <3>; |
| 649 |
power = <50>; |
| 650 |
}; |
| 651 |
|
| 652 |
&dss { |
| 653 |
status = "okay"; |
| 654 |
}; |
| 655 |
|
| 656 |
&dsi1 { |
| 657 |
status = "okay"; |
| 658 |
vdd-supply = <&vcxio>; |
| 659 |
|
| 660 |
port { |
| 661 |
dsi1_out_ep: endpoint { |
| 662 |
remote-endpoint = <&lcd0_in>; |
| 663 |
lanes = <0 1 2 3 4 5>; |
| 664 |
}; |
| 665 |
}; |
| 666 |
|
| 667 |
lcd0: panel@0 { |
| 668 |
compatible = "tpo,taal", "panel-dsi-cm"; |
| 669 |
reg = <0>; |
| 670 |
label = "lcd0"; |
| 671 |
|
| 672 |
reset-gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>; /* 102 */ |
| 673 |
|
| 674 |
port { |
| 675 |
lcd0_in: endpoint { |
| 676 |
remote-endpoint = <&dsi1_out_ep>; |
| 677 |
}; |
| 678 |
}; |
| 679 |
}; |
| 680 |
}; |
| 681 |
|
| 682 |
&dsi2 { |
| 683 |
status = "okay"; |
| 684 |
vdd-supply = <&vcxio>; |
| 685 |
|
| 686 |
port { |
| 687 |
dsi2_out_ep: endpoint { |
| 688 |
remote-endpoint = <&lcd1_in>; |
| 689 |
lanes = <0 1 2 3 4 5>; |
| 690 |
}; |
| 691 |
}; |
| 692 |
|
| 693 |
lcd1: panel@0 { |
| 694 |
compatible = "tpo,taal", "panel-dsi-cm"; |
| 695 |
reg = <0>; |
| 696 |
label = "lcd1"; |
| 697 |
|
| 698 |
reset-gpios = <&gpio4 8 GPIO_ACTIVE_HIGH>; /* 104 */ |
| 699 |
|
| 700 |
port { |
| 701 |
lcd1_in: endpoint { |
| 702 |
remote-endpoint = <&dsi2_out_ep>; |
| 703 |
}; |
| 704 |
}; |
| 705 |
}; |
| 706 |
}; |
| 707 |
|
| 708 |
&hdmi { |
| 709 |
status = "okay"; |
| 710 |
vdda-supply = <&vdac>; |
| 711 |
|
| 712 |
port { |
| 713 |
hdmi_out: endpoint { |
| 714 |
remote-endpoint = <&tpd12s015_in>; |
| 715 |
}; |
| 716 |
}; |
| 717 |
}; |