| 1 |
// SPDX-License-Identifier: GPL-2.0-only |
| 2 |
/* |
| 3 |
* Copyright (C) 2013 Marek Belisko <[email protected]> |
| 4 |
* |
| 5 |
* Based on omap3-beagle-xm.dts |
| 6 |
*/ |
| 7 |
/dts-v1/; |
| 8 |
|
| 9 |
#include "omap36xx.dtsi" |
| 10 |
#include <dt-bindings/input/input.h> |
| 11 |
|
| 12 |
/ { |
| 13 |
model = "OMAP3 GTA04"; |
| 14 |
compatible = "goldelico,gta04", "ti,omap3630", "ti,omap3"; |
| 15 |
cpus { |
| 16 |
cpu@0 { |
| 17 |
cpu0-supply = <&vcc>; |
| 18 |
}; |
| 19 |
}; |
| 20 |
|
| 21 |
memory@80000000 { |
| 22 |
device_type = "memory"; |
| 23 |
reg = <0x80000000 0x20000000>; /* 512 MB */ |
| 24 |
}; |
| 25 |
|
| 26 |
chosen { |
| 27 |
stdout-path = &uart3; |
| 28 |
}; |
| 29 |
|
| 30 |
aliases { |
| 31 |
display0 = &lcd; |
| 32 |
display1 = &tv0; |
| 33 |
/delete-property/ mmc2; |
| 34 |
/delete-property/ mmc3; |
| 35 |
}; |
| 36 |
|
| 37 |
ldo_3v3: fixedregulator { |
| 38 |
compatible = "regulator-fixed"; |
| 39 |
regulator-name = "ldo_3v3"; |
| 40 |
regulator-min-microvolt = <3300000>; |
| 41 |
regulator-max-microvolt = <3300000>; |
| 42 |
regulator-always-on; |
| 43 |
}; |
| 44 |
|
| 45 |
/* fixed 26MHz oscillator */ |
| 46 |
hfclk_26m: oscillator { |
| 47 |
#clock-cells = <0>; |
| 48 |
compatible = "fixed-clock"; |
| 49 |
clock-frequency = <26000000>; |
| 50 |
}; |
| 51 |
|
| 52 |
gpio-keys { |
| 53 |
compatible = "gpio-keys"; |
| 54 |
|
| 55 |
aux-button { |
| 56 |
label = "aux"; |
| 57 |
linux,code = <KEY_PHONE>; |
| 58 |
gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>; |
| 59 |
wakeup-source; |
| 60 |
}; |
| 61 |
}; |
| 62 |
|
| 63 |
antenna-detect { |
| 64 |
compatible = "gpio-keys"; |
| 65 |
|
| 66 |
gps_antenna_button: gps-antenna-button { |
| 67 |
label = "GPS_EXT_ANT"; |
| 68 |
linux,input-type = <EV_SW>; |
| 69 |
linux,code = <SW_LINEIN_INSERT>; |
| 70 |
gpios = <&gpio5 16 GPIO_ACTIVE_HIGH>; /* GPIO144 */ |
| 71 |
interrupt-parent = <&gpio5>; |
| 72 |
interrupts = <16 IRQ_TYPE_EDGE_BOTH>; |
| 73 |
debounce-interval = <10>; |
| 74 |
wakeup-source; |
| 75 |
}; |
| 76 |
}; |
| 77 |
|
| 78 |
sound { |
| 79 |
compatible = "ti,omap-twl4030"; |
| 80 |
ti,model = "gta04"; |
| 81 |
|
| 82 |
ti,mcbsp = <&mcbsp2>; |
| 83 |
}; |
| 84 |
|
| 85 |
/* GSM audio */ |
| 86 |
sound_telephony { |
| 87 |
compatible = "simple-audio-card"; |
| 88 |
simple-audio-card,name = "GTA04 voice"; |
| 89 |
simple-audio-card,bitclock-master = <&telephony_link_master>; |
| 90 |
simple-audio-card,frame-master = <&telephony_link_master>; |
| 91 |
simple-audio-card,format = "i2s"; |
| 92 |
simple-audio-card,bitclock-inversion; |
| 93 |
simple-audio-card,frame-inversion; |
| 94 |
simple-audio-card,cpu { |
| 95 |
sound-dai = <&mcbsp4>; |
| 96 |
}; |
| 97 |
|
| 98 |
telephony_link_master: simple-audio-card,codec { |
| 99 |
sound-dai = <>m601_codec>; |
| 100 |
}; |
| 101 |
}; |
| 102 |
|
| 103 |
gtm601_codec: gsm_codec { |
| 104 |
compatible = "option,gtm601"; |
| 105 |
#sound-dai-cells = <0>; |
| 106 |
}; |
| 107 |
|
| 108 |
spi_lcd: spi { |
| 109 |
compatible = "spi-gpio"; |
| 110 |
#address-cells = <0x1>; |
| 111 |
#size-cells = <0x0>; |
| 112 |
pinctrl-names = "default"; |
| 113 |
pinctrl-0 = <&spi_gpio_pins>; |
| 114 |
|
| 115 |
sck-gpios = <&gpio1 12 GPIO_ACTIVE_HIGH>; |
| 116 |
miso-gpios = <&gpio1 18 GPIO_ACTIVE_HIGH>; |
| 117 |
mosi-gpios = <&gpio1 20 GPIO_ACTIVE_HIGH>; |
| 118 |
cs-gpios = <&gpio1 19 GPIO_ACTIVE_LOW>; |
| 119 |
num-chipselects = <1>; |
| 120 |
|
| 121 |
/* lcd panel */ |
| 122 |
lcd: td028ttec1@0 { |
| 123 |
compatible = "tpo,td028ttec1"; |
| 124 |
reg = <0>; |
| 125 |
spi-max-frequency = <100000>; |
| 126 |
spi-cpol; |
| 127 |
spi-cpha; |
| 128 |
|
| 129 |
backlight = <&backlight>; |
| 130 |
label = "lcd"; |
| 131 |
port { |
| 132 |
lcd_in: endpoint { |
| 133 |
remote-endpoint = <&dpi_out>; |
| 134 |
}; |
| 135 |
}; |
| 136 |
}; |
| 137 |
}; |
| 138 |
|
| 139 |
backlight: backlight { |
| 140 |
compatible = "pwm-backlight"; |
| 141 |
pwms = <&pwm11 0 12000000 0>; |
| 142 |
pwm-names = "backlight"; |
| 143 |
brightness-levels = <0 11 20 30 40 50 60 70 80 90 100>; |
| 144 |
default-brightness-level = <9>; /* => 90 */ |
| 145 |
pinctrl-names = "default"; |
| 146 |
pinctrl-0 = <&backlight_pins>; |
| 147 |
}; |
| 148 |
|
| 149 |
pwm11: pwm-11 { |
| 150 |
compatible = "ti,omap-dmtimer-pwm"; |
| 151 |
ti,timers = <&timer11>; |
| 152 |
#pwm-cells = <3>; |
| 153 |
ti,clock-source = <0x01>; |
| 154 |
}; |
| 155 |
|
| 156 |
hsusb2_phy: hsusb2-phy-pins { |
| 157 |
compatible = "usb-nop-xceiv"; |
| 158 |
reset-gpios = <&gpio6 14 GPIO_ACTIVE_LOW>; |
| 159 |
#phy-cells = <0>; |
| 160 |
}; |
| 161 |
|
| 162 |
tv0: connector { |
| 163 |
compatible = "composite-video-connector"; |
| 164 |
label = "tv"; |
| 165 |
|
| 166 |
port { |
| 167 |
tv_connector_in: endpoint { |
| 168 |
remote-endpoint = <&opa_out>; |
| 169 |
}; |
| 170 |
}; |
| 171 |
}; |
| 172 |
|
| 173 |
tv_amp: opa362 { |
| 174 |
compatible = "ti,opa362"; |
| 175 |
enable-gpios = <&gpio1 23 GPIO_ACTIVE_HIGH>; /* GPIO_23 to enable video out amplifier */ |
| 176 |
|
| 177 |
ports { |
| 178 |
#address-cells = <1>; |
| 179 |
#size-cells = <0>; |
| 180 |
|
| 181 |
port@0 { |
| 182 |
reg = <0>; |
| 183 |
opa_in: endpoint { |
| 184 |
remote-endpoint = <&venc_out>; |
| 185 |
}; |
| 186 |
}; |
| 187 |
|
| 188 |
port@1 { |
| 189 |
reg = <1>; |
| 190 |
opa_out: endpoint { |
| 191 |
remote-endpoint = <&tv_connector_in>; |
| 192 |
}; |
| 193 |
}; |
| 194 |
}; |
| 195 |
}; |
| 196 |
|
| 197 |
wifi_pwrseq: wifi_pwrseq { |
| 198 |
compatible = "mmc-pwrseq-simple"; |
| 199 |
reset-gpios = <&tca6507 0 GPIO_ACTIVE_LOW>; /* W2CBW003 reset through tca6507 */ |
| 200 |
}; |
| 201 |
|
| 202 |
/* devconf0 setup for mcbsp1 clock pins */ |
| 203 |
pinmux@48002274 { |
| 204 |
compatible = "pinctrl-single"; |
| 205 |
reg = <0x48002274 4>; /* CONTROL_DEVCONF0 */ |
| 206 |
#address-cells = <1>; |
| 207 |
#size-cells = <0>; |
| 208 |
pinctrl-single,bit-per-mux; |
| 209 |
pinctrl-single,register-width = <32>; |
| 210 |
pinctrl-single,function-mask = <0x7>; /* MCBSP1 CLK pinmux */ |
| 211 |
#pinctrl-cells = <2>; |
| 212 |
pinctrl-names = "default"; |
| 213 |
pinctrl-0 = <&mcbsp1_devconf0_pins>; |
| 214 |
mcbsp1_devconf0_pins: mcbsp1-devconf0-pins { |
| 215 |
/* offset bits mask */ |
| 216 |
pinctrl-single,bits = <0x00 0x08 0x1c>; /* set MCBSP1_CLKR */ |
| 217 |
}; |
| 218 |
}; |
| 219 |
|
| 220 |
/* devconf1 setup for tvout pins */ |
| 221 |
pinmux@480022d8 { |
| 222 |
compatible = "pinctrl-single"; |
| 223 |
reg = <0x480022d8 4>; /* CONTROL_DEVCONF1 */ |
| 224 |
#address-cells = <1>; |
| 225 |
#size-cells = <0>; |
| 226 |
pinctrl-single,bit-per-mux; |
| 227 |
pinctrl-single,register-width = <32>; |
| 228 |
pinctrl-single,function-mask = <0x81>; /* TV out pin control */ |
| 229 |
#pinctrl-cells = <2>; |
| 230 |
pinctrl-names = "default"; |
| 231 |
pinctrl-0 = <&tv_acbias_devconf1_pins>; |
| 232 |
tv_acbias_devconf1_pins: tv-acbias-devconf1-pins { |
| 233 |
/* offset bits mask */ |
| 234 |
pinctrl-single,bits = <0x00 0x40800 0x40800>; /* set TVOUTBYPASS and TVOUTACEN */ |
| 235 |
}; |
| 236 |
}; |
| 237 |
}; |
| 238 |
|
| 239 |
&omap3_pmx_wkup { |
| 240 |
gpio1_pins: gpio1-pins { |
| 241 |
pinctrl-single,pins = < |
| 242 |
OMAP3_WKUP_IOPAD(0x2a14, PIN_INPUT | PIN_OFF_WAKEUPENABLE | MUX_MODE4) /* sys_boot5.gpio_7 */ |
| 243 |
OMAP3_WKUP_IOPAD(0x2a1a, PIN_INPUT | PIN_OFF_WAKEUPENABLE | MUX_MODE4) /* sys_clkout.gpio_10 */ |
| 244 |
>; |
| 245 |
}; |
| 246 |
}; |
| 247 |
|
| 248 |
&omap3_pmx_core { |
| 249 |
pinctrl-names = "default"; |
| 250 |
pinctrl-0 = < |
| 251 |
&hsusb2_pins |
| 252 |
>; |
| 253 |
|
| 254 |
hsusb2_pins: hsusb2-pins { |
| 255 |
pinctrl-single,pins = < |
| 256 |
OMAP3_CORE1_IOPAD(0x21d4, PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi1_cs3.hsusb2_data2 */ |
| 257 |
OMAP3_CORE1_IOPAD(0x21d6, PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi2_clk.hsusb2_data7 */ |
| 258 |
OMAP3_CORE1_IOPAD(0x21d8, PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi2_simo.hsusb2_data4 */ |
| 259 |
OMAP3_CORE1_IOPAD(0x21da, PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi2_somi.hsusb2_data5 */ |
| 260 |
OMAP3_CORE1_IOPAD(0x21dc, PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi2_cs0.hsusb2_data6 */ |
| 261 |
OMAP3_CORE1_IOPAD(0x21de, PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi2_cs1.hsusb2_data3 */ |
| 262 |
>; |
| 263 |
}; |
| 264 |
|
| 265 |
uart1_pins: uart1-pins { |
| 266 |
pinctrl-single,pins = < |
| 267 |
OMAP3_CORE1_IOPAD(0x2182, PIN_INPUT | MUX_MODE0) /* uart1_rx.uart1_rx */ |
| 268 |
OMAP3_CORE1_IOPAD(0x217c, PIN_OUTPUT | MUX_MODE0) /* uart1_tx.uart1_tx */ |
| 269 |
>; |
| 270 |
}; |
| 271 |
|
| 272 |
uart2_pins: uart2-pins { |
| 273 |
pinctrl-single,pins = < |
| 274 |
OMAP3_CORE1_IOPAD(0x217a, PIN_INPUT | MUX_MODE0) /* uart2_rx.uart2_rx */ |
| 275 |
OMAP3_CORE1_IOPAD(0x2178, PIN_OUTPUT | MUX_MODE0) /* uart2_tx.uart2_tx */ |
| 276 |
>; |
| 277 |
}; |
| 278 |
|
| 279 |
uart3_pins: uart3-pins { |
| 280 |
pinctrl-single,pins = < |
| 281 |
OMAP3_CORE1_IOPAD(0x219e, PIN_INPUT | MUX_MODE0) /* uart3_rx.uart3_rx */ |
| 282 |
OMAP3_CORE1_IOPAD(0x21a0, PIN_OUTPUT | MUX_MODE0) /* uart3_tx.uart3_tx */ |
| 283 |
>; |
| 284 |
}; |
| 285 |
|
| 286 |
mmc1_pins: mmc1-pins { |
| 287 |
pinctrl-single,pins = < |
| 288 |
OMAP3_CORE1_IOPAD(0x2144, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_clk.sdmmc1_clk */ |
| 289 |
OMAP3_CORE1_IOPAD(0x2146, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_cmd.sdmmc1_cmd */ |
| 290 |
OMAP3_CORE1_IOPAD(0x2148, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat0.sdmmc1_dat0 */ |
| 291 |
OMAP3_CORE1_IOPAD(0x214a, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat1.sdmmc1_dat1 */ |
| 292 |
OMAP3_CORE1_IOPAD(0x214c, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat2.sdmmc1_dat2 */ |
| 293 |
OMAP3_CORE1_IOPAD(0x214e, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat3.sdmmc1_dat3 */ |
| 294 |
>; |
| 295 |
}; |
| 296 |
|
| 297 |
backlight_pins: backlight-pinmux-pins { |
| 298 |
pinctrl-single,pins = < |
| 299 |
OMAP3_CORE1_IOPAD(0x20ba, MUX_MODE3) /* gpt11/gpio57 */ |
| 300 |
>; |
| 301 |
}; |
| 302 |
|
| 303 |
dss_dpi_pins: dss-dpi-pins { |
| 304 |
pinctrl-single,pins = < |
| 305 |
OMAP3_CORE1_IOPAD(0x20d4, PIN_OUTPUT | MUX_MODE0) /* dss_pclk.dss_pclk */ |
| 306 |
OMAP3_CORE1_IOPAD(0x20d6, PIN_OUTPUT | MUX_MODE0) /* dss_hsync.dss_hsync */ |
| 307 |
OMAP3_CORE1_IOPAD(0x20d8, PIN_OUTPUT | MUX_MODE0) /* dss_vsync.dss_vsync */ |
| 308 |
OMAP3_CORE1_IOPAD(0x20da, PIN_OUTPUT | MUX_MODE0) /* dss_acbias.dss_acbias */ |
| 309 |
OMAP3_CORE1_IOPAD(0x20dc, PIN_OUTPUT | MUX_MODE0) /* dss_data0.dss_data0 */ |
| 310 |
OMAP3_CORE1_IOPAD(0x20de, PIN_OUTPUT | MUX_MODE0) /* dss_data1.dss_data1 */ |
| 311 |
OMAP3_CORE1_IOPAD(0x20e0, PIN_OUTPUT | MUX_MODE0) /* dss_data2.dss_data2 */ |
| 312 |
OMAP3_CORE1_IOPAD(0x20e2, PIN_OUTPUT | MUX_MODE0) /* dss_data3.dss_data3 */ |
| 313 |
OMAP3_CORE1_IOPAD(0x20e4, PIN_OUTPUT | MUX_MODE0) /* dss_data4.dss_data4 */ |
| 314 |
OMAP3_CORE1_IOPAD(0x20e6, PIN_OUTPUT | MUX_MODE0) /* dss_data5.dss_data5 */ |
| 315 |
OMAP3_CORE1_IOPAD(0x20e8, PIN_OUTPUT | MUX_MODE0) /* dss_data6.dss_data6 */ |
| 316 |
OMAP3_CORE1_IOPAD(0x20ea, PIN_OUTPUT | MUX_MODE0) /* dss_data7.dss_data7 */ |
| 317 |
OMAP3_CORE1_IOPAD(0x20ec, PIN_OUTPUT | MUX_MODE0) /* dss_data8.dss_data8 */ |
| 318 |
OMAP3_CORE1_IOPAD(0x20ee, PIN_OUTPUT | MUX_MODE0) /* dss_data9.dss_data9 */ |
| 319 |
OMAP3_CORE1_IOPAD(0x20f0, PIN_OUTPUT | MUX_MODE0) /* dss_data10.dss_data10 */ |
| 320 |
OMAP3_CORE1_IOPAD(0x20f2, PIN_OUTPUT | MUX_MODE0) /* dss_data11.dss_data11 */ |
| 321 |
OMAP3_CORE1_IOPAD(0x20f4, PIN_OUTPUT | MUX_MODE0) /* dss_data12.dss_data12 */ |
| 322 |
OMAP3_CORE1_IOPAD(0x20f6, PIN_OUTPUT | MUX_MODE0) /* dss_data13.dss_data13 */ |
| 323 |
OMAP3_CORE1_IOPAD(0x20f8, PIN_OUTPUT | MUX_MODE0) /* dss_data14.dss_data14 */ |
| 324 |
OMAP3_CORE1_IOPAD(0x20fa, PIN_OUTPUT | MUX_MODE0) /* dss_data15.dss_data15 */ |
| 325 |
OMAP3_CORE1_IOPAD(0x20fc, PIN_OUTPUT | MUX_MODE0) /* dss_data16.dss_data16 */ |
| 326 |
OMAP3_CORE1_IOPAD(0x20fe, PIN_OUTPUT | MUX_MODE0) /* dss_data17.dss_data17 */ |
| 327 |
OMAP3_CORE1_IOPAD(0x2100, PIN_OUTPUT | MUX_MODE0) /* dss_data18.dss_data18 */ |
| 328 |
OMAP3_CORE1_IOPAD(0x2102, PIN_OUTPUT | MUX_MODE0) /* dss_data19.dss_data19 */ |
| 329 |
OMAP3_CORE1_IOPAD(0x2104, PIN_OUTPUT | MUX_MODE0) /* dss_data20.dss_data20 */ |
| 330 |
OMAP3_CORE1_IOPAD(0x2106, PIN_OUTPUT | MUX_MODE0) /* dss_data21.dss_data21 */ |
| 331 |
OMAP3_CORE1_IOPAD(0x2108, PIN_OUTPUT | MUX_MODE0) /* dss_data22.dss_data22 */ |
| 332 |
OMAP3_CORE1_IOPAD(0x210a, PIN_OUTPUT | MUX_MODE0) /* dss_data23.dss_data23 */ |
| 333 |
>; |
| 334 |
}; |
| 335 |
|
| 336 |
gps_pins: gps-pins { |
| 337 |
pinctrl-single,pins = < |
| 338 |
OMAP3_CORE1_IOPAD(0x2176, PIN_OUTPUT_PULLDOWN | MUX_MODE4) /* gpio145 */ |
| 339 |
>; |
| 340 |
}; |
| 341 |
|
| 342 |
hdq_pins: hdq-pins { |
| 343 |
pinctrl-single,pins = < |
| 344 |
OMAP3_CORE1_IOPAD(0x21c6, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c3_sda.hdq */ |
| 345 |
>; |
| 346 |
}; |
| 347 |
|
| 348 |
bmp085_pins: bmp085-pins { |
| 349 |
pinctrl-single,pins = < |
| 350 |
OMAP3_CORE1_IOPAD(0x2136, PIN_INPUT_PULLUP | MUX_MODE4) /* gpio113 */ |
| 351 |
>; |
| 352 |
}; |
| 353 |
|
| 354 |
bma180_pins: bma180-pins { |
| 355 |
pinctrl-single,pins = < |
| 356 |
OMAP3_CORE1_IOPAD(0x213a, PIN_INPUT_PULLUP | MUX_MODE4) /* gpio115 */ |
| 357 |
>; |
| 358 |
}; |
| 359 |
|
| 360 |
itg3200_pins: itg3200-pins { |
| 361 |
pinctrl-single,pins = < |
| 362 |
OMAP3_CORE1_IOPAD(0x20b8, PIN_INPUT_PULLUP | MUX_MODE4) /* gpio56 */ |
| 363 |
>; |
| 364 |
}; |
| 365 |
|
| 366 |
hmc5843_pins: hmc5843-pins { |
| 367 |
pinctrl-single,pins = < |
| 368 |
OMAP3_CORE1_IOPAD(0x2134, PIN_INPUT_PULLUP | MUX_MODE4) /* gpio112 */ |
| 369 |
>; |
| 370 |
}; |
| 371 |
|
| 372 |
penirq_pins: penirq-pins { |
| 373 |
pinctrl-single,pins = < |
| 374 |
/* here we could enable to wakeup the cpu from suspend by a pen touch */ |
| 375 |
OMAP3_CORE1_IOPAD(0x2194, PIN_INPUT_PULLUP | MUX_MODE4) /* gpio160 */ |
| 376 |
>; |
| 377 |
}; |
| 378 |
|
| 379 |
camera_pins: camera-pins { |
| 380 |
pinctrl-single,pins = < |
| 381 |
/* set up parallel camera interface */ |
| 382 |
OMAP3_CORE1_IOPAD(0x210c, PIN_INPUT_PULLDOWN | MUX_MODE0) /* cam_hs */ |
| 383 |
OMAP3_CORE1_IOPAD(0x210e, PIN_INPUT_PULLDOWN | MUX_MODE0) /* cam_vs */ |
| 384 |
OMAP3_CORE1_IOPAD(0x2110, PIN_OUTPUT | MUX_MODE0) /* cam_xclka */ |
| 385 |
OMAP3_CORE1_IOPAD(0x2112, PIN_INPUT_PULLDOWN | MUX_MODE0) /* cam_pclk */ |
| 386 |
OMAP3_CORE1_IOPAD(0x2114, PIN_OUTPUT | MUX_MODE4) /* cam_fld = gpio_98 */ |
| 387 |
OMAP3_CORE1_IOPAD(0x2116, PIN_INPUT_PULLDOWN | MUX_MODE0) /* cam_d0 */ |
| 388 |
OMAP3_CORE1_IOPAD(0x2118, PIN_INPUT_PULLDOWN | MUX_MODE0) /* cam_d1 */ |
| 389 |
OMAP3_CORE1_IOPAD(0x211a, PIN_INPUT_PULLDOWN | MUX_MODE0) /* cam_d2 */ |
| 390 |
OMAP3_CORE1_IOPAD(0x211c, PIN_INPUT_PULLDOWN | MUX_MODE0) /* cam_d3 */ |
| 391 |
OMAP3_CORE1_IOPAD(0x211e, PIN_INPUT_PULLDOWN | MUX_MODE0) /* cam_d4 */ |
| 392 |
OMAP3_CORE1_IOPAD(0x2120, PIN_INPUT_PULLDOWN | MUX_MODE0) /* cam_d5 */ |
| 393 |
OMAP3_CORE1_IOPAD(0x2122, PIN_INPUT_PULLDOWN | MUX_MODE0) /* cam_d6 */ |
| 394 |
OMAP3_CORE1_IOPAD(0x2124, PIN_INPUT_PULLDOWN | MUX_MODE0) /* cam_d7 */ |
| 395 |
OMAP3_CORE1_IOPAD(0x2126, PIN_INPUT_PULLDOWN | MUX_MODE0) /* cam_d8 */ |
| 396 |
OMAP3_CORE1_IOPAD(0x2128, PIN_INPUT_PULLDOWN | MUX_MODE0) /* cam_d9 */ |
| 397 |
OMAP3_CORE1_IOPAD(0x212a, PIN_INPUT_PULLDOWN | MUX_MODE0) /* cam_d10 */ |
| 398 |
OMAP3_CORE1_IOPAD(0x212c, PIN_INPUT_PULLDOWN | MUX_MODE0) /* cam_d10 */ |
| 399 |
OMAP3_CORE1_IOPAD(0x212e, PIN_OUTPUT | MUX_MODE0) /* cam_xclkb */ |
| 400 |
OMAP3_CORE1_IOPAD(0x2130, PIN_OUTPUT | MUX_MODE4) /* cam_wen = gpio_167 */ |
| 401 |
OMAP3_CORE1_IOPAD(0x2132, PIN_INPUT_PULLDOWN | MUX_MODE4) /* cam_strobe */ |
| 402 |
>; |
| 403 |
}; |
| 404 |
|
| 405 |
mcbsp1_pins: mcbsp1-pins { |
| 406 |
pinctrl-single,pins = < |
| 407 |
OMAP3_CORE1_IOPAD(0x218c, PIN_INPUT | MUX_MODE4) /* mcbsp1_clkr.mcbsp1_clkr - gpio_156 FM interrupt */ |
| 408 |
OMAP3_CORE1_IOPAD(0x218e, PIN_OUTPUT | MUX_MODE0) /* mcbsp1_clkr.mcbsp1_fsr */ |
| 409 |
OMAP3_CORE1_IOPAD(0x2190, PIN_OUTPUT | MUX_MODE0) /* mcbsp1_dx.mcbsp1_dx */ |
| 410 |
OMAP3_CORE1_IOPAD(0x2192, PIN_INPUT | MUX_MODE0) /* mcbsp1_dx.mcbsp1_dr */ |
| 411 |
/* mcbsp_clks is used as PENIRQ */ |
| 412 |
/* OMAP3_CORE1_IOPAD(0x2194, PIN_INPUT | MUX_MODE0) mcbsp_clks.mcbsp_clks */ |
| 413 |
OMAP3_CORE1_IOPAD(0x2196, PIN_INPUT | MUX_MODE0) /* mcbsp_clks.mcbsp1_fsx */ |
| 414 |
OMAP3_CORE1_IOPAD(0x2198, PIN_INPUT | MUX_MODE0) /* mcbsp1_clkx.mcbsp1_clkx */ |
| 415 |
>; |
| 416 |
}; |
| 417 |
|
| 418 |
mcbsp2_pins: mcbsp2-pins { |
| 419 |
pinctrl-single,pins = < |
| 420 |
OMAP3_CORE1_IOPAD(0x213c, PIN_INPUT | MUX_MODE0) /* mcbsp2_fsx.mcbsp2_fsx */ |
| 421 |
OMAP3_CORE1_IOPAD(0x213e, PIN_INPUT | MUX_MODE0) /* mcbsp2_fsx.mcbsp2_clkx */ |
| 422 |
OMAP3_CORE1_IOPAD(0x2140, PIN_INPUT | MUX_MODE0) /* mcbsp2_dr.mcbsp2_dr */ |
| 423 |
OMAP3_CORE1_IOPAD(0x2142, PIN_OUTPUT | MUX_MODE0) /* mcbsp2_dr.mcbsp2_dx */ |
| 424 |
>; |
| 425 |
}; |
| 426 |
|
| 427 |
mcbsp3_pins: mcbsp3-pins { |
| 428 |
pinctrl-single,pins = < |
| 429 |
OMAP3_CORE1_IOPAD(0x216c, PIN_OUTPUT | MUX_MODE0) /* mcbsp3_dx.mcbsp3_dx */ |
| 430 |
OMAP3_CORE1_IOPAD(0x216e, PIN_INPUT | MUX_MODE0) /* mcbsp3_dx.mcbsp3_dr */ |
| 431 |
OMAP3_CORE1_IOPAD(0x2170, PIN_INPUT | MUX_MODE0) /* mcbsp3_clkx.mcbsp3_clkx */ |
| 432 |
OMAP3_CORE1_IOPAD(0x2172, PIN_INPUT | MUX_MODE0) /* mcbsp3_clkx.mcbsp3_fsx */ |
| 433 |
>; |
| 434 |
}; |
| 435 |
|
| 436 |
mcbsp4_pins: mcbsp4-pins { |
| 437 |
pinctrl-single,pins = < |
| 438 |
OMAP3_CORE1_IOPAD(0x2184, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcbsp4_clkx.mcbsp4_clkx */ |
| 439 |
OMAP3_CORE1_IOPAD(0x2186, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcbsp4_clkx.mcbsp4_dr */ |
| 440 |
OMAP3_CORE1_IOPAD(0x218a, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcbsp4_dx.mcbsp4_fsx */ |
| 441 |
>; |
| 442 |
}; |
| 443 |
}; |
| 444 |
|
| 445 |
&omap3_pmx_core2 { |
| 446 |
pinctrl-names = "default"; |
| 447 |
pinctrl-0 = < |
| 448 |
&hsusb2_2_pins |
| 449 |
&mcspi3hog_pins |
| 450 |
>; |
| 451 |
|
| 452 |
hsusb2_2_pins: hsusb2-2-pins { |
| 453 |
pinctrl-single,pins = < |
| 454 |
OMAP3630_CORE2_IOPAD(0x25f0, PIN_OUTPUT | MUX_MODE3) /* etk_d10.hsusb2_clk */ |
| 455 |
OMAP3630_CORE2_IOPAD(0x25f2, PIN_OUTPUT | MUX_MODE3) /* etk_d11.hsusb2_stp */ |
| 456 |
OMAP3630_CORE2_IOPAD(0x25f4, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d12.hsusb2_dir */ |
| 457 |
OMAP3630_CORE2_IOPAD(0x25f6, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d13.hsusb2_nxt */ |
| 458 |
OMAP3630_CORE2_IOPAD(0x25f8, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d14.hsusb2_data0 */ |
| 459 |
OMAP3630_CORE2_IOPAD(0x25fa, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d15.hsusb2_data1 */ |
| 460 |
>; |
| 461 |
}; |
| 462 |
|
| 463 |
mcspi3hog_pins: mcspi3hog-pins { |
| 464 |
pinctrl-single,pins = < |
| 465 |
OMAP3630_CORE2_IOPAD(0x25dc, PIN_OUTPUT_PULLDOWN | MUX_MODE4) /* etk_d0 */ |
| 466 |
OMAP3630_CORE2_IOPAD(0x25de, PIN_OUTPUT_PULLDOWN | MUX_MODE4) /* etk_d1 */ |
| 467 |
OMAP3630_CORE2_IOPAD(0x25e0, PIN_OUTPUT_PULLDOWN | MUX_MODE4) /* etk_d2 */ |
| 468 |
OMAP3630_CORE2_IOPAD(0x25e2, PIN_OUTPUT_PULLDOWN | MUX_MODE4) /* etk_d3 */ |
| 469 |
>; |
| 470 |
}; |
| 471 |
|
| 472 |
spi_gpio_pins: spi-gpio-pinmux-pins { |
| 473 |
pinctrl-single,pins = < |
| 474 |
OMAP3630_CORE2_IOPAD(0x25d8, PIN_OUTPUT | MUX_MODE4) /* clk */ |
| 475 |
OMAP3630_CORE2_IOPAD(0x25e6, PIN_OUTPUT | MUX_MODE4) /* cs */ |
| 476 |
OMAP3630_CORE2_IOPAD(0x25e8, PIN_OUTPUT | MUX_MODE4) /* tx */ |
| 477 |
OMAP3630_CORE2_IOPAD(0x25e4, PIN_INPUT | MUX_MODE4) /* rx */ |
| 478 |
>; |
| 479 |
}; |
| 480 |
}; |
| 481 |
|
| 482 |
&i2c1 { |
| 483 |
clock-frequency = <2600000>; |
| 484 |
|
| 485 |
twl: twl@48 { |
| 486 |
reg = <0x48>; |
| 487 |
interrupts = <7>; /* SYS_NIRQ cascaded to intc */ |
| 488 |
interrupt-parent = <&intc>; |
| 489 |
|
| 490 |
clocks = <&hfclk_26m>; |
| 491 |
clock-names = "fck"; |
| 492 |
|
| 493 |
twl_audio: audio { |
| 494 |
compatible = "ti,twl4030-audio"; |
| 495 |
ti,enable-vibra = <1>; |
| 496 |
codec { |
| 497 |
ti,ramp_delay_value = <3>; |
| 498 |
}; |
| 499 |
}; |
| 500 |
|
| 501 |
twl_power: power { |
| 502 |
compatible = "ti,twl4030-power-idle"; |
| 503 |
ti,system-power-controller; |
| 504 |
}; |
| 505 |
}; |
| 506 |
}; |
| 507 |
|
| 508 |
#include "twl4030.dtsi" |
| 509 |
#include "twl4030_omap3.dtsi" |
| 510 |
|
| 511 |
&i2c2 { |
| 512 |
clock-frequency = <400000>; |
| 513 |
|
| 514 |
/* pressure sensor */ |
| 515 |
bmp085@77 { |
| 516 |
compatible = "bosch,bmp085"; |
| 517 |
reg = <0x77>; |
| 518 |
pinctrl-names = "default"; |
| 519 |
pinctrl-0 = <&bmp085_pins>; |
| 520 |
interrupt-parent = <&gpio4>; |
| 521 |
interrupts = <17 IRQ_TYPE_EDGE_RISING>; /* GPIO_113 */ |
| 522 |
vdda-supply = <&vio>; |
| 523 |
vddd-supply = <&vio>; |
| 524 |
}; |
| 525 |
|
| 526 |
/* accelerometer */ |
| 527 |
bma180@41 { |
| 528 |
compatible = "bosch,bma180"; |
| 529 |
reg = <0x41>; |
| 530 |
pinctrl-names = "default"; |
| 531 |
pinctrl-0 = <&bma180_pins>; |
| 532 |
interrupt-parent = <&gpio4>; |
| 533 |
interrupts = <19 IRQ_TYPE_LEVEL_HIGH>; /* GPIO_115 */ |
| 534 |
}; |
| 535 |
|
| 536 |
/* gyroscope */ |
| 537 |
itg3200@68 { |
| 538 |
compatible = "invensense,itg3200"; |
| 539 |
reg = <0x68>; |
| 540 |
pinctrl-names = "default"; |
| 541 |
pinctrl-0 = <&itg3200_pins>; |
| 542 |
interrupt-parent = <&gpio2>; |
| 543 |
interrupts = <24 IRQ_TYPE_EDGE_FALLING>; /* GPIO_56 */ |
| 544 |
}; |
| 545 |
|
| 546 |
/* leds + gpios */ |
| 547 |
tca6507: tca6507@45 { |
| 548 |
compatible = "ti,tca6507"; |
| 549 |
#address-cells = <1>; |
| 550 |
#size-cells = <0>; |
| 551 |
reg = <0x45>; |
| 552 |
|
| 553 |
gpio-controller; |
| 554 |
#gpio-cells = <2>; |
| 555 |
|
| 556 |
gta04_led0: led@0 { |
| 557 |
label = "gta04:red:aux"; |
| 558 |
reg = <0x0>; |
| 559 |
}; |
| 560 |
|
| 561 |
gta04_led1: led@1 { |
| 562 |
label = "gta04:green:aux"; |
| 563 |
reg = <0x1>; |
| 564 |
}; |
| 565 |
|
| 566 |
gta04_led3: led@3 { |
| 567 |
label = "gta04:red:power"; |
| 568 |
reg = <0x3>; |
| 569 |
linux,default-trigger = "default-on"; |
| 570 |
}; |
| 571 |
|
| 572 |
gta04_led4: led@4 { |
| 573 |
label = "gta04:green:power"; |
| 574 |
reg = <0x4>; |
| 575 |
}; |
| 576 |
|
| 577 |
wifi_reset: led@6 { |
| 578 |
/* reference as <&tca_gpios 0 0> since it is currently the only GPIO */ |
| 579 |
reg = <0x6>; |
| 580 |
compatible = "gpio"; |
| 581 |
}; |
| 582 |
}; |
| 583 |
|
| 584 |
/* compass aka magnetometer */ |
| 585 |
hmc5843@1e { |
| 586 |
compatible = "honeywell,hmc5883l"; |
| 587 |
reg = <0x1e>; |
| 588 |
pinctrl-names = "default"; |
| 589 |
pinctrl-0 = <&hmc5843_pins>; |
| 590 |
interrupt-parent = <&gpio4>; |
| 591 |
interrupts = <16 IRQ_TYPE_EDGE_FALLING>; /* gpio112 */ |
| 592 |
}; |
| 593 |
|
| 594 |
/* touchscreen */ |
| 595 |
tsc2007@48 { |
| 596 |
compatible = "ti,tsc2007"; |
| 597 |
reg = <0x48>; |
| 598 |
pinctrl-names = "default"; |
| 599 |
pinctrl-0 = <&penirq_pins>; |
| 600 |
interrupt-parent = <&gpio6>; |
| 601 |
interrupts = <0 IRQ_TYPE_EDGE_FALLING>; /* GPIO_160 */ |
| 602 |
gpios = <&gpio6 0 GPIO_ACTIVE_LOW>; /* GPIO_160 */ |
| 603 |
ti,x-plate-ohms = <600>; |
| 604 |
touchscreen-size-x = <0xf00>; |
| 605 |
touchscreen-size-y = <0xf00>; |
| 606 |
touchscreen-min-x = <0x100>; |
| 607 |
touchscreen-min-y = <0x100>; |
| 608 |
touchscreen-max-pressure = <1000>; |
| 609 |
touchscreen-fuzz-x = <3>; |
| 610 |
touchscreen-fuzz-y = <8>; |
| 611 |
touchscreen-fuzz-pressure = <10>; |
| 612 |
touchscreen-inverted-y; |
| 613 |
}; |
| 614 |
|
| 615 |
/* RFID EEPROM */ |
| 616 |
eeprom@50 { |
| 617 |
compatible = "atmel,24c64"; |
| 618 |
reg = <0x50>; |
| 619 |
}; |
| 620 |
}; |
| 621 |
|
| 622 |
&i2c3 { |
| 623 |
clock-frequency = <100000>; |
| 624 |
}; |
| 625 |
|
| 626 |
&mcspi1 { |
| 627 |
status = "disabled"; |
| 628 |
}; |
| 629 |
|
| 630 |
&mcspi2 { |
| 631 |
status = "disabled"; |
| 632 |
}; |
| 633 |
|
| 634 |
&mcspi3 { |
| 635 |
status = "disabled"; |
| 636 |
}; |
| 637 |
|
| 638 |
&mcspi4 { |
| 639 |
status = "disabled"; |
| 640 |
}; |
| 641 |
|
| 642 |
&usb_otg_hs { |
| 643 |
interface-type = <0>; |
| 644 |
usb-phy = <&usb2_phy>; |
| 645 |
phys = <&usb2_phy>; |
| 646 |
phy-names = "usb2-phy"; |
| 647 |
mode = <3>; |
| 648 |
power = <50>; |
| 649 |
}; |
| 650 |
|
| 651 |
&usbhshost { |
| 652 |
port2-mode = "ehci-phy"; |
| 653 |
}; |
| 654 |
|
| 655 |
&usbhsehci { |
| 656 |
phys = <0 &hsusb2_phy>; |
| 657 |
}; |
| 658 |
|
| 659 |
&mmc1 { |
| 660 |
pinctrl-names = "default"; |
| 661 |
pinctrl-0 = <&mmc1_pins>; |
| 662 |
vmmc-supply = <&vmmc1>; |
| 663 |
bus-width = <4>; |
| 664 |
ti,non-removable; |
| 665 |
broken-cd; /* hardware has no CD */ |
| 666 |
}; |
| 667 |
|
| 668 |
&mmc2 { |
| 669 |
vmmc-supply = <&vaux4>; |
| 670 |
bus-width = <4>; |
| 671 |
ti,non-removable; |
| 672 |
cap-power-off-card; |
| 673 |
mmc-pwrseq = <&wifi_pwrseq>; |
| 674 |
}; |
| 675 |
|
| 676 |
&mmc3 { |
| 677 |
status = "disabled"; |
| 678 |
}; |
| 679 |
|
| 680 |
#define BIT(x) (1 << (x)) |
| 681 |
&twl_gpio { |
| 682 |
/* pullups: BIT(2) */ |
| 683 |
ti,pullups = <BIT(2)>; |
| 684 |
/* |
| 685 |
* pulldowns: |
| 686 |
* BIT(0), BIT(1), BIT(6), BIT(7), BIT(8), BIT(13) |
| 687 |
* BIT(15), BIT(16), BIT(17) |
| 688 |
*/ |
| 689 |
ti,pulldowns = <(BIT(0) | BIT(1) | BIT(6) | BIT(7) | BIT(8) | |
| 690 |
BIT(13) | BIT(15) | BIT(16) | BIT(17))>; |
| 691 |
}; |
| 692 |
|
| 693 |
&twl_keypad { |
| 694 |
status = "disabled"; |
| 695 |
}; |
| 696 |
|
| 697 |
&gpio1 { |
| 698 |
pinctrl-names = "default"; |
| 699 |
pinctrl-0 = <&gpio1_pins>; |
| 700 |
}; |
| 701 |
|
| 702 |
&uart1 { |
| 703 |
pinctrl-names = "default"; |
| 704 |
pinctrl-0 = <&uart1_pins>; |
| 705 |
}; |
| 706 |
|
| 707 |
&uart2 { |
| 708 |
pinctrl-names = "default"; |
| 709 |
pinctrl-0 = <&uart2_pins>; |
| 710 |
gnss: gnss { |
| 711 |
compatible = "wi2wi,w2sg0004"; |
| 712 |
pinctrl-names = "default"; |
| 713 |
pinctrl-0 = <&gps_pins>; |
| 714 |
sirf,onoff-gpios = <&gpio5 17 GPIO_ACTIVE_HIGH>; |
| 715 |
lna-supply = <&vsim>; |
| 716 |
vcc-supply = <&ldo_3v3>; |
| 717 |
}; |
| 718 |
}; |
| 719 |
|
| 720 |
&uart3 { |
| 721 |
pinctrl-names = "default"; |
| 722 |
pinctrl-0 = <&uart3_pins>; |
| 723 |
interrupts-extended = <&intc 74 &omap3_pmx_core OMAP3_UART3_RX>; |
| 724 |
}; |
| 725 |
|
| 726 |
&charger { |
| 727 |
ti,bb-uvolt = <3200000>; |
| 728 |
ti,bb-uamp = <150>; |
| 729 |
}; |
| 730 |
|
| 731 |
/* spare */ |
| 732 |
&vaux1 { |
| 733 |
regulator-min-microvolt = <2500000>; |
| 734 |
regulator-max-microvolt = <3000000>; |
| 735 |
}; |
| 736 |
|
| 737 |
/* sensors */ |
| 738 |
&vaux2 { |
| 739 |
regulator-min-microvolt = <2800000>; |
| 740 |
regulator-max-microvolt = <2800000>; |
| 741 |
regulator-always-on; /* we should never switch off while vio is on! */ |
| 742 |
}; |
| 743 |
|
| 744 |
/* camera */ |
| 745 |
&vaux3 { |
| 746 |
regulator-min-microvolt = <2500000>; |
| 747 |
regulator-max-microvolt = <2500000>; |
| 748 |
}; |
| 749 |
|
| 750 |
/* WLAN/BT */ |
| 751 |
&vaux4 { |
| 752 |
regulator-min-microvolt = <2800000>; |
| 753 |
regulator-max-microvolt = <3150000>; |
| 754 |
}; |
| 755 |
|
| 756 |
/* GPS LNA */ |
| 757 |
&vsim { |
| 758 |
regulator-min-microvolt = <2800000>; |
| 759 |
regulator-max-microvolt = <3150000>; |
| 760 |
}; |
| 761 |
|
| 762 |
/* Needed to power the DPI pins */ |
| 763 |
|
| 764 |
&vpll2 { |
| 765 |
regulator-always-on; |
| 766 |
}; |
| 767 |
|
| 768 |
&dss { |
| 769 |
pinctrl-names = "default"; |
| 770 |
pinctrl-0 = < &dss_dpi_pins >; |
| 771 |
|
| 772 |
status = "okay"; |
| 773 |
vdds_dsi-supply = <&vpll2>; |
| 774 |
|
| 775 |
port { |
| 776 |
dpi_out: endpoint { |
| 777 |
remote-endpoint = <&lcd_in>; |
| 778 |
data-lines = <24>; |
| 779 |
}; |
| 780 |
}; |
| 781 |
}; |
| 782 |
|
| 783 |
&venc { |
| 784 |
status = "okay"; |
| 785 |
|
| 786 |
vdda-supply = <&vdac>; |
| 787 |
|
| 788 |
port { |
| 789 |
venc_out: endpoint { |
| 790 |
remote-endpoint = <&opa_in>; |
| 791 |
ti,channels = <1>; |
| 792 |
ti,invert-polarity; |
| 793 |
}; |
| 794 |
}; |
| 795 |
}; |
| 796 |
|
| 797 |
&gpmc { |
| 798 |
ranges = <0 0 0x30000000 0x1000000>; /* CS0: 16MB for NAND */ |
| 799 |
|
| 800 |
nand@0,0 { |
| 801 |
compatible = "ti,omap2-nand"; |
| 802 |
reg = <0 0 4>; /* CS0, offset 0, IO size 4 */ |
| 803 |
interrupt-parent = <&gpmc>; |
| 804 |
interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */ |
| 805 |
<1 IRQ_TYPE_NONE>; /* termcount */ |
| 806 |
ti,nand-ecc-opt = "ham1"; |
| 807 |
rb-gpios = <&gpmc 0 GPIO_ACTIVE_HIGH>; /* gpmc_wait0 */ |
| 808 |
nand-bus-width = <16>; |
| 809 |
#address-cells = <1>; |
| 810 |
#size-cells = <1>; |
| 811 |
|
| 812 |
gpmc,device-width = <2>; |
| 813 |
gpmc,cs-on-ns = <0>; |
| 814 |
gpmc,cs-rd-off-ns = <44>; |
| 815 |
gpmc,cs-wr-off-ns = <44>; |
| 816 |
gpmc,adv-on-ns = <6>; |
| 817 |
gpmc,adv-rd-off-ns = <34>; |
| 818 |
gpmc,adv-wr-off-ns = <44>; |
| 819 |
gpmc,oe-off-ns = <54>; |
| 820 |
gpmc,we-off-ns = <40>; |
| 821 |
gpmc,access-ns = <64>; |
| 822 |
gpmc,rd-cycle-ns = <82>; |
| 823 |
gpmc,wr-cycle-ns = <82>; |
| 824 |
gpmc,wr-access-ns = <40>; |
| 825 |
gpmc,wr-data-mux-bus-ns = <0>; |
| 826 |
gpmc,sync-clk-ps = <0>; |
| 827 |
|
| 828 |
x-loader@0 { |
| 829 |
label = "X-Loader"; |
| 830 |
reg = <0 0x80000>; |
| 831 |
}; |
| 832 |
|
| 833 |
bootloaders@80000 { |
| 834 |
label = "U-Boot"; |
| 835 |
reg = <0x80000 0x1c0000>; |
| 836 |
}; |
| 837 |
|
| 838 |
bootloaders_env@240000 { |
| 839 |
label = "U-Boot Env"; |
| 840 |
reg = <0x240000 0x40000>; |
| 841 |
}; |
| 842 |
|
| 843 |
kernel@280000 { |
| 844 |
label = "Kernel"; |
| 845 |
reg = <0x280000 0x600000>; |
| 846 |
}; |
| 847 |
|
| 848 |
filesystem@880000 { |
| 849 |
label = "File System"; |
| 850 |
reg = <0x880000 0>; /* 0 = MTDPART_SIZ_FULL */ |
| 851 |
}; |
| 852 |
}; |
| 853 |
}; |
| 854 |
|
| 855 |
&mcbsp1 { /* FM Transceiver PCM */ |
| 856 |
status = "okay"; |
| 857 |
#sound-dai-cells = <0>; |
| 858 |
pinctrl-names = "default"; |
| 859 |
pinctrl-0 = <&mcbsp1_pins>; |
| 860 |
}; |
| 861 |
|
| 862 |
&mcbsp2 { /* TPS65950 I2S */ |
| 863 |
status = "okay"; |
| 864 |
pinctrl-names = "default"; |
| 865 |
pinctrl-0 = <&mcbsp2_pins>; |
| 866 |
}; |
| 867 |
|
| 868 |
&mcbsp3 { /* Bluetooth PCM */ |
| 869 |
status = "okay"; |
| 870 |
#sound-dai-cells = <0>; |
| 871 |
pinctrl-names = "default"; |
| 872 |
pinctrl-0 = <&mcbsp3_pins>; |
| 873 |
}; |
| 874 |
|
| 875 |
&mcbsp4 { /* GSM voice PCM */ |
| 876 |
status = "okay"; |
| 877 |
#sound-dai-cells = <0>; |
| 878 |
pinctrl-names = "default"; |
| 879 |
pinctrl-0 = <&mcbsp4_pins>; |
| 880 |
}; |
| 881 |
|
| 882 |
&hdqw1w { |
| 883 |
pinctrl-names = "default"; |
| 884 |
pinctrl-0 = <&hdq_pins>; |
| 885 |
}; |
| 886 |
|
| 887 |
/* image signal processor within OMAP3 SoC */ |
| 888 |
&isp { |
| 889 |
ports { |
| 890 |
port@0 { |
| 891 |
reg = <0>; |
| 892 |
parallel_ep: endpoint { |
| 893 |
ti,isp-clock-divisor = <1>; |
| 894 |
ti,strobe-mode; |
| 895 |
bus-width = <8>;/* Used data lines */ |
| 896 |
data-shift = <2>; /* Lines 9:2 are used */ |
| 897 |
hsync-active = <0>; /* Active low */ |
| 898 |
vsync-active = <1>; /* Active high */ |
| 899 |
data-active = <1>;/* Active high */ |
| 900 |
pclk-sample = <1>;/* Falling */ |
| 901 |
}; |
| 902 |
}; |
| 903 |
/* port@1 and port@2 are not used by GTA04 */ |
| 904 |
}; |
| 905 |
}; |