| 1 |
// SPDX-License-Identifier: GPL-2.0-only |
| 2 |
/* |
| 3 |
* Copyright (C) 2014-18 H. Nikolaus Schaller <[email protected]> |
| 4 |
*/ |
| 5 |
|
| 6 |
#include "omap3-gta04.dtsi" |
| 7 |
|
| 8 |
/ { |
| 9 |
model = "Goldelico GTA04A5/Letux 2804"; |
| 10 |
|
| 11 |
sound { |
| 12 |
ti,jack-det-gpio = <&twl_gpio 2 GPIO_ACTIVE_HIGH>; /* GTA04A5 only */ |
| 13 |
}; |
| 14 |
|
| 15 |
wlan_en: wlan_en_regulator { |
| 16 |
compatible = "regulator-fixed"; |
| 17 |
pinctrl-names = "default"; |
| 18 |
pinctrl-0 = <&wlan_pins>; |
| 19 |
regulator-name = "wlan-en-regulator"; |
| 20 |
regulator-min-microvolt = <1800000>; |
| 21 |
regulator-max-microvolt = <1800000>; |
| 22 |
|
| 23 |
gpio = <&gpio5 10 GPIO_ACTIVE_HIGH>; /* GPIO_138 */ |
| 24 |
|
| 25 |
startup-delay-us = <70000>; |
| 26 |
enable-active-high; |
| 27 |
}; |
| 28 |
|
| 29 |
pps { |
| 30 |
compatible = "pps-gpio"; |
| 31 |
pinctrl-names = "default"; |
| 32 |
pinctrl-0 = <&pps_pins>; |
| 33 |
|
| 34 |
gpios = <&gpio4 18 GPIO_ACTIVE_HIGH>; /* GPIN_114 */ |
| 35 |
}; |
| 36 |
|
| 37 |
}; |
| 38 |
|
| 39 |
&gpio5 { |
| 40 |
irda-en-hog { |
| 41 |
gpio-hog; |
| 42 |
gpios = <(175-160) GPIO_ACTIVE_HIGH>; |
| 43 |
output-high; /* activate gpio_175 to disable IrDA receiver */ |
| 44 |
}; |
| 45 |
}; |
| 46 |
|
| 47 |
&omap3_pmx_core { |
| 48 |
bt_pins: bt-pins { |
| 49 |
pinctrl-single,pins = < |
| 50 |
OMAP3_CORE1_IOPAD(0x2166, PIN_OUTPUT | MUX_MODE4) /* mmc2_dat5 = mmc3_dat1 = gpio137 */ |
| 51 |
>; |
| 52 |
}; |
| 53 |
|
| 54 |
wlan_pins: wlan-pins { |
| 55 |
pinctrl-single,pins = < |
| 56 |
OMAP3_CORE1_IOPAD(0x2168, PIN_OUTPUT | MUX_MODE4) /* mmc2_dat6 = mmc3_dat2 = gpio138 */ |
| 57 |
>; |
| 58 |
}; |
| 59 |
|
| 60 |
wlan_irq_pin: wlan-irq-pins { |
| 61 |
pinctrl-single,pins = < |
| 62 |
OMAP3_CORE1_IOPAD(0x216a, PIN_INPUT_PULLUP | MUX_MODE4) /* mmc2_dat7 = mmc3_dat3 = gpio139 */ |
| 63 |
>; |
| 64 |
}; |
| 65 |
|
| 66 |
irda_pins: irda-pins { |
| 67 |
pinctrl-single,pins = < |
| 68 |
OMAP3_CORE1_IOPAD(0x21d0, PIN_OUTPUT_PULLUP | MUX_MODE4) /* mcspi1_cs1 = gpio175 */ |
| 69 |
>; |
| 70 |
}; |
| 71 |
|
| 72 |
pps_pins: pps-pins { |
| 73 |
pinctrl-single,pins = < |
| 74 |
OMAP3_CORE1_IOPAD(0x2138, PIN_INPUT | MUX_MODE4) /* gpin114 */ |
| 75 |
>; |
| 76 |
}; |
| 77 |
|
| 78 |
bno050_pins: pinmux-bno050-pins { |
| 79 |
pinctrl-single,pins = < |
| 80 |
OMAP3_CORE1_IOPAD(0x2136, PIN_INPUT | MUX_MODE4) /* gpin113 */ |
| 81 |
>; |
| 82 |
}; |
| 83 |
}; |
| 84 |
|
| 85 |
/* |
| 86 |
* for WL183x module see |
| 87 |
* Documentation/devicetree/bindings/net/wireless/ti,wlcore.yaml |
| 88 |
*/ |
| 89 |
|
| 90 |
&wifi_pwrseq { |
| 91 |
/delete-property/ reset-gpios; |
| 92 |
}; |
| 93 |
|
| 94 |
&mmc2 { |
| 95 |
vmmc-supply = <&wlan_en>; |
| 96 |
bus-width = <4>; |
| 97 |
cap-power-off-card; |
| 98 |
non-removable; |
| 99 |
|
| 100 |
pinctrl-names = "default"; |
| 101 |
pinctrl-0 = <&wlan_irq_pin>; |
| 102 |
|
| 103 |
#address-cells = <1>; |
| 104 |
#size-cells = <0>; |
| 105 |
|
| 106 |
/delete-property/ mmc-pwrseq; |
| 107 |
|
| 108 |
wlcore: wlcore@2 { |
| 109 |
compatible = "ti,wl1837"; |
| 110 |
reg = <2>; |
| 111 |
interrupt-parent = <&gpio5>; |
| 112 |
interrupts = <11 IRQ_TYPE_LEVEL_HIGH>; /* GPIO_139 */ |
| 113 |
ref-clock-frequency = <26000000>; |
| 114 |
}; |
| 115 |
}; |
| 116 |
|
| 117 |
&uart1 { |
| 118 |
bluetooth { |
| 119 |
compatible = "ti,wl1837-st"; |
| 120 |
pinctrl-names = "default"; |
| 121 |
pinctrl-0 = <&bt_pins>; |
| 122 |
enable-gpios = <&gpio5 9 GPIO_ACTIVE_HIGH>; /* GPIO_137 */ |
| 123 |
}; |
| 124 |
}; |
| 125 |
|
| 126 |
|
| 127 |
&i2c2 { |
| 128 |
/delete-node/ bmp085@77; |
| 129 |
/delete-node/ bma180@41; |
| 130 |
/delete-node/ itg3200@68; |
| 131 |
/delete-node/ hmc5843@1e; |
| 132 |
|
| 133 |
gyrometer@69 { |
| 134 |
compatible = "bosch,bmg160"; |
| 135 |
reg = <0x69>; |
| 136 |
}; |
| 137 |
|
| 138 |
accelerometer@10 { |
| 139 |
compatible = "bosch,bmc150_accel"; |
| 140 |
reg = <0x10>; |
| 141 |
}; |
| 142 |
|
| 143 |
magnetometer@12 { |
| 144 |
compatible = "bosch,bmc150_magn"; |
| 145 |
reg = <0x12>; |
| 146 |
}; |
| 147 |
|
| 148 |
bme280@76 { |
| 149 |
compatible = "bosch,bme280"; |
| 150 |
reg = <0x76>; |
| 151 |
vdda-supply = <&vio>; |
| 152 |
vddd-supply = <&vio>; |
| 153 |
}; |
| 154 |
|
| 155 |
imu@29 { |
| 156 |
compatible = "bosch,bno055"; |
| 157 |
reg = <0x29>; |
| 158 |
pinctrl-names = "default"; |
| 159 |
pinctrl-0 = <&bno050_pins>; |
| 160 |
/* interrupt at &gpio4 17 */ |
| 161 |
}; |
| 162 |
}; |