| 1 |
// SPDX-License-Identifier: GPL-2.0-only |
| 2 |
/* |
| 3 |
* Common Device Tree Source for IGEP COM MODULE |
| 4 |
* |
| 5 |
* Copyright (C) 2014 Javier Martinez Canillas <[email protected]> |
| 6 |
* Copyright (C) 2014 Enric Balletbo i Serra <[email protected]> |
| 7 |
*/ |
| 8 |
|
| 9 |
#include "omap3-igep.dtsi" |
| 10 |
|
| 11 |
/ { |
| 12 |
leds: gpio_leds { |
| 13 |
compatible = "gpio-leds"; |
| 14 |
|
| 15 |
user0 { |
| 16 |
label = "omap3:red:user0"; |
| 17 |
gpios = <&twl_gpio 18 GPIO_ACTIVE_LOW>; /* LEDA */ |
| 18 |
default-state = "off"; |
| 19 |
}; |
| 20 |
|
| 21 |
user1 { |
| 22 |
label = "omap3:green:user1"; |
| 23 |
gpios = <&twl_gpio 19 GPIO_ACTIVE_LOW>; /* LEDB */ |
| 24 |
default-state = "off"; |
| 25 |
}; |
| 26 |
|
| 27 |
user2 { |
| 28 |
label = "omap3:red:user1"; |
| 29 |
gpios = <&gpio1 16 GPIO_ACTIVE_LOW>; /* gpio_16 */ |
| 30 |
default-state = "off"; |
| 31 |
}; |
| 32 |
}; |
| 33 |
|
| 34 |
hsusb2_phy: hsusb2-phy-pins { |
| 35 |
compatible = "usb-nop-xceiv"; |
| 36 |
reset-gpios = <&gpio2 22 GPIO_ACTIVE_LOW>; /* gpio_54 */ |
| 37 |
#phy-cells = <0>; |
| 38 |
}; |
| 39 |
}; |
| 40 |
|
| 41 |
&omap3_pmx_core { |
| 42 |
pinctrl-names = "default"; |
| 43 |
pinctrl-0 = <&hsusb2_pins>; |
| 44 |
|
| 45 |
hsusb2_pins: hsusb2-pins { |
| 46 |
pinctrl-single,pins = < |
| 47 |
OMAP3_CORE1_IOPAD(0x21d4, PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi1_cs3.hsusb2_data2 */ |
| 48 |
OMAP3_CORE1_IOPAD(0x21d6, PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi2_clk.hsusb2_data7 */ |
| 49 |
OMAP3_CORE1_IOPAD(0x21d8, PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi2_simo.hsusb2_data4 */ |
| 50 |
OMAP3_CORE1_IOPAD(0x21da, PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi2_somi.hsusb2_data5 */ |
| 51 |
OMAP3_CORE1_IOPAD(0x21dc, PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi2_cs0.hsusb2_data6 */ |
| 52 |
OMAP3_CORE1_IOPAD(0x21de, PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi2_cs1.hsusb2_data3 */ |
| 53 |
>; |
| 54 |
}; |
| 55 |
|
| 56 |
uart2_pins: uart2-pins { |
| 57 |
pinctrl-single,pins = < |
| 58 |
OMAP3_CORE1_IOPAD(0x216c, PIN_INPUT | MUX_MODE1) /* mcbsp3_dx.uart2_cts */ |
| 59 |
OMAP3_CORE1_IOPAD(0x216e, PIN_OUTPUT | MUX_MODE1) /* mcbsp3_dr.uart2_rts */ |
| 60 |
OMAP3_CORE1_IOPAD(0x2170, PIN_OUTPUT | MUX_MODE1) /* mcbsp3_clk.uart2_tx */ |
| 61 |
OMAP3_CORE1_IOPAD(0x2172, PIN_INPUT | MUX_MODE1) /* mcbsp3_fsx.uart2_rx */ |
| 62 |
>; |
| 63 |
}; |
| 64 |
}; |
| 65 |
|
| 66 |
&omap3_pmx_core2 { |
| 67 |
pinctrl-names = "default"; |
| 68 |
pinctrl-0 = <&hsusb2_core2_pins>; |
| 69 |
|
| 70 |
hsusb2_core2_pins: hsusb2-core2-pins { |
| 71 |
pinctrl-single,pins = < |
| 72 |
OMAP3630_CORE2_IOPAD(0x25f0, PIN_OUTPUT | MUX_MODE3) /* etk_d10.hsusb2_clk */ |
| 73 |
OMAP3630_CORE2_IOPAD(0x25f2, PIN_OUTPUT | MUX_MODE3) /* etk_d11.hsusb2_stp */ |
| 74 |
OMAP3630_CORE2_IOPAD(0x25f4, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d12.hsusb2_dir */ |
| 75 |
OMAP3630_CORE2_IOPAD(0x25f6, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d13.hsusb2_nxt */ |
| 76 |
OMAP3630_CORE2_IOPAD(0x25f8, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d14.hsusb2_data0 */ |
| 77 |
OMAP3630_CORE2_IOPAD(0x25fa, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d15.hsusb2_data1 */ |
| 78 |
>; |
| 79 |
}; |
| 80 |
|
| 81 |
leds_core2_pins: leds-core2-pins { |
| 82 |
pinctrl-single,pins = < |
| 83 |
OMAP3630_CORE2_IOPAD(0x25e0, PIN_OUTPUT | MUX_MODE4) /* etk_d2.gpio_16 */ |
| 84 |
>; |
| 85 |
}; |
| 86 |
}; |
| 87 |
|
| 88 |
&usbhshost { |
| 89 |
port2-mode = "ehci-phy"; |
| 90 |
}; |
| 91 |
|
| 92 |
&usbhsehci { |
| 93 |
phys = <0 &hsusb2_phy>; |
| 94 |
}; |
| 95 |
|
| 96 |
&uart2 { |
| 97 |
pinctrl-names = "default"; |
| 98 |
pinctrl-0 = <&uart2_pins>; |
| 99 |
}; |
| 100 |
|
| 101 |
&gpmc { |
| 102 |
ranges = <0 0 0x30000000 0x01000000>; /* CS0: 16MB for NAND */ |
| 103 |
}; |