| 1 |
// SPDX-License-Identifier: GPL-2.0-or-later |
| 2 |
/* |
| 3 |
* Copyright (C) 2014 Christoph Fritz <[email protected]> |
| 4 |
*/ |
| 5 |
|
| 6 |
#include "omap36xx.dtsi" |
| 7 |
|
| 8 |
/ { |
| 9 |
model = "INCOstartec LILLY-A83X module (DM3730)"; |
| 10 |
compatible = "incostartec,omap3-lilly-a83x", "ti,omap3630", "ti,omap36xx", "ti,omap3"; |
| 11 |
|
| 12 |
chosen { |
| 13 |
bootargs = "console=ttyO0,115200n8 vt.global_cursor_default=0 consoleblank=0"; |
| 14 |
}; |
| 15 |
|
| 16 |
memory@80000000 { |
| 17 |
device_type = "memory"; |
| 18 |
reg = <0x80000000 0x8000000>; /* 128 MB */ |
| 19 |
}; |
| 20 |
|
| 21 |
leds { |
| 22 |
compatible = "gpio-leds"; |
| 23 |
|
| 24 |
led1 { |
| 25 |
label = "lilly-a83x::led1"; |
| 26 |
gpios = <&gpio1 29 GPIO_ACTIVE_LOW>; |
| 27 |
linux,default-trigger = "default-on"; |
| 28 |
}; |
| 29 |
|
| 30 |
}; |
| 31 |
|
| 32 |
sound { |
| 33 |
compatible = "ti,omap-twl4030"; |
| 34 |
ti,model = "lilly-a83x"; |
| 35 |
|
| 36 |
ti,mcbsp = <&mcbsp2>; |
| 37 |
}; |
| 38 |
|
| 39 |
reg_vcc3: vcc3 { |
| 40 |
compatible = "regulator-fixed"; |
| 41 |
regulator-name = "VCC3"; |
| 42 |
regulator-min-microvolt = <3300000>; |
| 43 |
regulator-max-microvolt = <3300000>; |
| 44 |
regulator-always-on; |
| 45 |
}; |
| 46 |
|
| 47 |
hsusb1_phy: hsusb1_phy { |
| 48 |
compatible = "usb-nop-xceiv"; |
| 49 |
vcc-supply = <®_vcc3>; |
| 50 |
#phy-cells = <0>; |
| 51 |
}; |
| 52 |
}; |
| 53 |
|
| 54 |
&omap3_pmx_wkup { |
| 55 |
pinctrl-names = "default"; |
| 56 |
|
| 57 |
lan9221_pins: lan9221-pins { |
| 58 |
pinctrl-single,pins = < |
| 59 |
OMAP3_WKUP_IOPAD(0x2a5a, PIN_INPUT | MUX_MODE4) /* reserved.gpio_129 */ |
| 60 |
>; |
| 61 |
}; |
| 62 |
|
| 63 |
tsc2048_pins: tsc2048-pins { |
| 64 |
pinctrl-single,pins = < |
| 65 |
OMAP3_WKUP_IOPAD(0x2a16, PIN_INPUT_PULLUP | MUX_MODE4) /* sys_boot6.gpio_8 */ |
| 66 |
>; |
| 67 |
}; |
| 68 |
|
| 69 |
mmc1cd_pins: mmc1cd-pins { |
| 70 |
pinctrl-single,pins = < |
| 71 |
OMAP3_WKUP_IOPAD(0x2a56, PIN_INPUT | MUX_MODE4) /* reserved.gpio_126 */ |
| 72 |
>; |
| 73 |
}; |
| 74 |
}; |
| 75 |
|
| 76 |
&omap3_pmx_core { |
| 77 |
pinctrl-names = "default"; |
| 78 |
|
| 79 |
uart1_pins: uart1-pins { |
| 80 |
pinctrl-single,pins = < |
| 81 |
OMAP3_CORE1_IOPAD(0x217c, PIN_OUTPUT | MUX_MODE0) /* uart1_tx.uart1_tx */ |
| 82 |
OMAP3_CORE1_IOPAD(0x217e, PIN_OUTPUT | MUX_MODE0) /* uart1_rts.uart1_rts */ |
| 83 |
OMAP3_CORE1_IOPAD(0x2180, PIN_INPUT | MUX_MODE0) /* uart1_cts.uart1_cts */ |
| 84 |
OMAP3_CORE1_IOPAD(0x2182, PIN_INPUT | MUX_MODE0) /* uart1_rx.uart1_rx */ |
| 85 |
>; |
| 86 |
}; |
| 87 |
|
| 88 |
uart2_pins: uart2-pins { |
| 89 |
pinctrl-single,pins = < |
| 90 |
OMAP3_CORE1_IOPAD(0x2170, PIN_OUTPUT | MUX_MODE1) /* mcbsp3_clkx.uart2_tx */ |
| 91 |
OMAP3_CORE1_IOPAD(0x2172, PIN_INPUT | MUX_MODE1) /* mcbsp3_fsx.uart2_rx */ |
| 92 |
>; |
| 93 |
}; |
| 94 |
|
| 95 |
uart3_pins: uart3-pins { |
| 96 |
pinctrl-single,pins = < |
| 97 |
OMAP3_CORE1_IOPAD(0x219e, PIN_INPUT | MUX_MODE0) /* uart3_rx_irrx.uart3_rx_irrx */ |
| 98 |
OMAP3_CORE1_IOPAD(0x21a0, PIN_OUTPUT | MUX_MODE0) /* uart3_tx_irtx.uart3_tx_irtx */ |
| 99 |
>; |
| 100 |
}; |
| 101 |
|
| 102 |
i2c1_pins: i2c1-pins { |
| 103 |
pinctrl-single,pins = < |
| 104 |
OMAP3_CORE1_IOPAD(0x21ba ,PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_scl.i2c1_scl */ |
| 105 |
OMAP3_CORE1_IOPAD(0x21bc ,PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_sda.i2c1_sda */ |
| 106 |
>; |
| 107 |
}; |
| 108 |
|
| 109 |
i2c2_pins: i2c2-pins { |
| 110 |
pinctrl-single,pins = < |
| 111 |
OMAP3_CORE1_IOPAD(0x21be, PIN_INPUT | MUX_MODE0) /* i2c2_scl.i2c2_scl */ |
| 112 |
OMAP3_CORE1_IOPAD(0x21c0, PIN_INPUT | MUX_MODE0) /* i2c2_sda.i2c2_sda */ |
| 113 |
>; |
| 114 |
}; |
| 115 |
|
| 116 |
i2c3_pins: i2c3-pins { |
| 117 |
pinctrl-single,pins = < |
| 118 |
OMAP3_CORE1_IOPAD(0x21c2, PIN_INPUT | MUX_MODE0) /* i2c3_scl.i2c3_scl */ |
| 119 |
OMAP3_CORE1_IOPAD(0x21c4, PIN_INPUT | MUX_MODE0) /* i2c3_sda.i2c3_sda */ |
| 120 |
>; |
| 121 |
}; |
| 122 |
|
| 123 |
hsusb1_pins: hsusb1-pins { |
| 124 |
pinctrl-single,pins = < |
| 125 |
|
| 126 |
/* GPIO 182 controls USB-Hub reset. But USB-Phy its |
| 127 |
* reset can't be controlled. So we clamp this GPIO to |
| 128 |
* high (PIN_OFF_OUTPUT_HIGH) to always enable USB-Hub. |
| 129 |
*/ |
| 130 |
|
| 131 |
OMAP3_CORE1_IOPAD(0x21de, PIN_OUTPUT_PULLUP | PIN_OFF_OUTPUT_HIGH | MUX_MODE4) /* mcspi2_cs1.gpio_182 */ |
| 132 |
>; |
| 133 |
}; |
| 134 |
|
| 135 |
hsusb_otg_pins: hsusb-otg-pins { |
| 136 |
pinctrl-single,pins = < |
| 137 |
OMAP3_CORE1_IOPAD(0x21a2, PIN_INPUT | MUX_MODE0) /* hsusb0_clk.hsusb0_clk */ |
| 138 |
OMAP3_CORE1_IOPAD(0x21a4, PIN_OUTPUT | MUX_MODE0) /* hsusb0_stp.hsusb0_stp */ |
| 139 |
OMAP3_CORE1_IOPAD(0x21a6, PIN_INPUT | MUX_MODE0) /* hsusb0_dir.hsusb0_dir */ |
| 140 |
OMAP3_CORE1_IOPAD(0x21a8, PIN_INPUT | MUX_MODE0) /* hsusb0_nxt.hsusb0_nxt */ |
| 141 |
OMAP3_CORE1_IOPAD(0x21aa, PIN_INPUT | MUX_MODE0) /* hsusb0_data0.hsusb0_data0 */ |
| 142 |
OMAP3_CORE1_IOPAD(0x21ac, PIN_INPUT | MUX_MODE0) /* hsusb0_data1.hsusb0_data1 */ |
| 143 |
OMAP3_CORE1_IOPAD(0x21ae, PIN_INPUT | MUX_MODE0) /* hsusb0_data2.hsusb0_data2 */ |
| 144 |
OMAP3_CORE1_IOPAD(0x21b0, PIN_INPUT | MUX_MODE0) /* hsusb0_data3.hsusb0_data3 */ |
| 145 |
OMAP3_CORE1_IOPAD(0x21b2, PIN_INPUT | MUX_MODE0) /* hsusb0_data4.hsusb0_data4 */ |
| 146 |
OMAP3_CORE1_IOPAD(0x21b4, PIN_INPUT | MUX_MODE0) /* hsusb0_data5.hsusb0_data5 */ |
| 147 |
OMAP3_CORE1_IOPAD(0x21b6, PIN_INPUT | MUX_MODE0) /* hsusb0_data6.hsusb0_data6 */ |
| 148 |
OMAP3_CORE1_IOPAD(0x21b8, PIN_INPUT | MUX_MODE0) /* hsusb0_data7.hsusb0_data7 */ |
| 149 |
>; |
| 150 |
}; |
| 151 |
|
| 152 |
mmc1_pins: mmc1-pins { |
| 153 |
pinctrl-single,pins = < |
| 154 |
OMAP3_CORE1_IOPAD(0x2144, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_clk.sdmmc1_clk */ |
| 155 |
OMAP3_CORE1_IOPAD(0x2146, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_cmd.sdmmc1_cmd */ |
| 156 |
OMAP3_CORE1_IOPAD(0x2148, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat0.sdmmc1_dat0 */ |
| 157 |
OMAP3_CORE1_IOPAD(0x214a, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat1.sdmmc1_dat1 */ |
| 158 |
OMAP3_CORE1_IOPAD(0x214c, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat2.sdmmc1_dat2 */ |
| 159 |
OMAP3_CORE1_IOPAD(0x214e, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat3.sdmmc1_dat3 */ |
| 160 |
>; |
| 161 |
}; |
| 162 |
|
| 163 |
spi2_pins: spi2-pins { |
| 164 |
pinctrl-single,pins = < |
| 165 |
OMAP3_CORE1_IOPAD(0x21d6, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcspi2_clk.mcspi2_clk */ |
| 166 |
OMAP3_CORE1_IOPAD(0x21d8, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcspi2_simo.mcspi2_simo */ |
| 167 |
OMAP3_CORE1_IOPAD(0x21da, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcspi2_somi.mcspi2_somi */ |
| 168 |
OMAP3_CORE1_IOPAD(0x21dc, PIN_OUTPUT | MUX_MODE0) /* mcspi2_cs0.mcspi2_cs0 */ |
| 169 |
>; |
| 170 |
}; |
| 171 |
}; |
| 172 |
|
| 173 |
&omap3_pmx_core2 { |
| 174 |
pinctrl-names = "default"; |
| 175 |
|
| 176 |
hsusb1_2_pins: hsusb1-2-pins { |
| 177 |
pinctrl-single,pins = < |
| 178 |
OMAP3630_CORE2_IOPAD(0x25d8, PIN_OUTPUT | MUX_MODE3) /* etk_clk.hsusb1_stp */ |
| 179 |
OMAP3630_CORE2_IOPAD(0x25da, PIN_INPUT | MUX_MODE3) /* etk_ctl.hsusb1_clk */ |
| 180 |
OMAP3630_CORE2_IOPAD(0x25dc, PIN_INPUT | MUX_MODE3) /* etk_d0.hsusb1_data0 */ |
| 181 |
OMAP3630_CORE2_IOPAD(0x25de, PIN_INPUT | MUX_MODE3) /* etk_d1.hsusb1_data1 */ |
| 182 |
OMAP3630_CORE2_IOPAD(0x25e0, PIN_INPUT | MUX_MODE3) /* etk_d2.hsusb1_data2 */ |
| 183 |
OMAP3630_CORE2_IOPAD(0x25e2, PIN_INPUT | MUX_MODE3) /* etk_d3.hsusb1_data7 */ |
| 184 |
OMAP3630_CORE2_IOPAD(0x25e4, PIN_INPUT | MUX_MODE3) /* etk_d4.hsusb1_data4 */ |
| 185 |
OMAP3630_CORE2_IOPAD(0x25e6, PIN_INPUT | MUX_MODE3) /* etk_d5.hsusb1_data5 */ |
| 186 |
OMAP3630_CORE2_IOPAD(0x25e8, PIN_INPUT | MUX_MODE3) /* etk_d6.hsusb1_data6 */ |
| 187 |
OMAP3630_CORE2_IOPAD(0x25ea, PIN_INPUT | MUX_MODE3) /* etk_d7.hsusb1_data3 */ |
| 188 |
OMAP3630_CORE2_IOPAD(0x25ec, PIN_INPUT | MUX_MODE3) /* etk_d8.hsusb1_dir */ |
| 189 |
OMAP3630_CORE2_IOPAD(0x25ee, PIN_INPUT | MUX_MODE3) /* etk_d9.hsusb1_nxt */ |
| 190 |
>; |
| 191 |
}; |
| 192 |
|
| 193 |
gpio1_pins: gpio1-pins { |
| 194 |
pinctrl-single,pins = < |
| 195 |
OMAP3630_CORE2_IOPAD(0x25fa, PIN_OUTPUT_PULLDOWN | MUX_MODE4) /* etk_d15.gpio_29 */ |
| 196 |
>; |
| 197 |
}; |
| 198 |
|
| 199 |
}; |
| 200 |
|
| 201 |
&gpio1 { |
| 202 |
pinctrl-names = "default"; |
| 203 |
pinctrl-0 = <&gpio1_pins>; |
| 204 |
}; |
| 205 |
|
| 206 |
&gpio6 { |
| 207 |
pinctrl-names = "default"; |
| 208 |
pinctrl-0 = <&hsusb1_pins>; |
| 209 |
}; |
| 210 |
|
| 211 |
&i2c1 { |
| 212 |
clock-frequency = <2600000>; |
| 213 |
pinctrl-names = "default"; |
| 214 |
pinctrl-0 = <&i2c1_pins>; |
| 215 |
|
| 216 |
twl: twl@48 { |
| 217 |
reg = <0x48>; |
| 218 |
interrupts = <7>; /* SYS_NIRQ cascaded to intc */ |
| 219 |
interrupt-parent = <&intc>; |
| 220 |
|
| 221 |
twl_audio: audio { |
| 222 |
compatible = "ti,twl4030-audio"; |
| 223 |
codec { |
| 224 |
}; |
| 225 |
}; |
| 226 |
}; |
| 227 |
}; |
| 228 |
|
| 229 |
#include "twl4030.dtsi" |
| 230 |
#include "twl4030_omap3.dtsi" |
| 231 |
|
| 232 |
&twl { |
| 233 |
vmmc1: regulator-vmmc1 { |
| 234 |
regulator-always-on; |
| 235 |
}; |
| 236 |
|
| 237 |
vdd1: regulator-vdd1 { |
| 238 |
regulator-always-on; |
| 239 |
}; |
| 240 |
|
| 241 |
vdd2: regulator-vdd2 { |
| 242 |
regulator-always-on; |
| 243 |
}; |
| 244 |
}; |
| 245 |
|
| 246 |
&i2c2 { |
| 247 |
clock-frequency = <2600000>; |
| 248 |
pinctrl-names = "default"; |
| 249 |
pinctrl-0 = <&i2c2_pins>; |
| 250 |
}; |
| 251 |
|
| 252 |
&i2c3 { |
| 253 |
clock-frequency = <2600000>; |
| 254 |
pinctrl-names = "default"; |
| 255 |
pinctrl-0 = <&i2c3_pins>; |
| 256 |
gpiom1: gpio@20 { |
| 257 |
compatible = "microchip,mcp23017"; |
| 258 |
gpio-controller; |
| 259 |
#gpio-cells = <2>; |
| 260 |
reg = <0x20>; |
| 261 |
}; |
| 262 |
}; |
| 263 |
|
| 264 |
&uart1 { |
| 265 |
pinctrl-names = "default"; |
| 266 |
pinctrl-0 = <&uart1_pins>; |
| 267 |
}; |
| 268 |
|
| 269 |
&uart2 { |
| 270 |
pinctrl-names = "default"; |
| 271 |
pinctrl-0 = <&uart2_pins>; |
| 272 |
}; |
| 273 |
|
| 274 |
&uart3 { |
| 275 |
pinctrl-names = "default"; |
| 276 |
pinctrl-0 = <&uart3_pins>; |
| 277 |
}; |
| 278 |
|
| 279 |
&uart4 { |
| 280 |
status = "disabled"; |
| 281 |
}; |
| 282 |
|
| 283 |
&mmc1 { |
| 284 |
cd-gpios = <&gpio4 30 GPIO_ACTIVE_LOW>; |
| 285 |
cd-inverted; |
| 286 |
vmmc-supply = <&vmmc1>; |
| 287 |
bus-width = <4>; |
| 288 |
pinctrl-names = "default"; |
| 289 |
pinctrl-0 = <&mmc1_pins &mmc1cd_pins>; |
| 290 |
cap-sdio-irq; |
| 291 |
cap-sd-highspeed; |
| 292 |
cap-mmc-highspeed; |
| 293 |
}; |
| 294 |
|
| 295 |
&mmc2 { |
| 296 |
status = "disabled"; |
| 297 |
}; |
| 298 |
|
| 299 |
&mmc3 { |
| 300 |
status = "disabled"; |
| 301 |
}; |
| 302 |
|
| 303 |
&mcspi2 { |
| 304 |
status = "okay"; |
| 305 |
pinctrl-names = "default"; |
| 306 |
pinctrl-0 = <&spi2_pins>; |
| 307 |
|
| 308 |
tsc2046@0 { |
| 309 |
reg = <0>; /* CS0 */ |
| 310 |
compatible = "ti,tsc2046"; |
| 311 |
interrupt-parent = <&gpio1>; |
| 312 |
interrupts = <8 0>; /* boot6 / gpio_8 */ |
| 313 |
spi-max-frequency = <1000000>; |
| 314 |
pendown-gpio = <&gpio1 8 GPIO_ACTIVE_LOW>; |
| 315 |
vcc-supply = <®_vcc3>; |
| 316 |
pinctrl-names = "default"; |
| 317 |
pinctrl-0 = <&tsc2048_pins>; |
| 318 |
|
| 319 |
ti,x-min = /bits/ 16 <300>; |
| 320 |
ti,x-max = /bits/ 16 <3000>; |
| 321 |
ti,y-min = /bits/ 16 <600>; |
| 322 |
ti,y-max = /bits/ 16 <3600>; |
| 323 |
ti,x-plate-ohms = /bits/ 16 <80>; |
| 324 |
ti,pressure-max = /bits/ 16 <255>; |
| 325 |
ti,swap-xy; |
| 326 |
|
| 327 |
wakeup-source; |
| 328 |
}; |
| 329 |
}; |
| 330 |
|
| 331 |
&usbhsehci { |
| 332 |
phys = <&hsusb1_phy>; |
| 333 |
}; |
| 334 |
|
| 335 |
&usbhshost { |
| 336 |
pinctrl-names = "default"; |
| 337 |
pinctrl-0 = <&hsusb1_2_pins>; |
| 338 |
num-ports = <2>; |
| 339 |
port1-mode = "ehci-phy"; |
| 340 |
}; |
| 341 |
|
| 342 |
&usb_otg_hs { |
| 343 |
pinctrl-names = "default"; |
| 344 |
pinctrl-0 = <&hsusb_otg_pins>; |
| 345 |
interface-type = <0>; |
| 346 |
usb-phy = <&usb2_phy>; |
| 347 |
phys = <&usb2_phy>; |
| 348 |
phy-names = "usb2-phy"; |
| 349 |
mode = <3>; |
| 350 |
power = <50>; |
| 351 |
}; |
| 352 |
|
| 353 |
&mcbsp2 { |
| 354 |
status = "okay"; |
| 355 |
}; |
| 356 |
|
| 357 |
&gpmc { |
| 358 |
ranges = <0 0 0x30000000 0x1000000>, |
| 359 |
<7 0 0x15000000 0x01000000>; |
| 360 |
|
| 361 |
nand@0,0 { |
| 362 |
compatible = "ti,omap2-nand"; |
| 363 |
reg = <0 0 4>; /* CS0, offset 0, IO size 4 */ |
| 364 |
interrupt-parent = <&gpmc>; |
| 365 |
interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */ |
| 366 |
<1 IRQ_TYPE_NONE>; /* termcount */ |
| 367 |
nand-bus-width = <16>; |
| 368 |
ti,nand-ecc-opt = "bch8"; |
| 369 |
/* no elm on omap3 */ |
| 370 |
|
| 371 |
gpmc,mux-add-data = <0>; |
| 372 |
gpmc,device-width = <2>; |
| 373 |
gpmc,wait-pin = <0>; |
| 374 |
gpmc,wait-monitoring-ns = <0>; |
| 375 |
gpmc,burst-length = <4>; |
| 376 |
gpmc,cs-on-ns = <0>; |
| 377 |
gpmc,cs-rd-off-ns = <100>; |
| 378 |
gpmc,cs-wr-off-ns = <100>; |
| 379 |
gpmc,adv-on-ns = <0>; |
| 380 |
gpmc,adv-rd-off-ns = <100>; |
| 381 |
gpmc,adv-wr-off-ns = <100>; |
| 382 |
gpmc,oe-on-ns = <5>; |
| 383 |
gpmc,oe-off-ns = <75>; |
| 384 |
gpmc,we-on-ns = <5>; |
| 385 |
gpmc,we-off-ns = <75>; |
| 386 |
gpmc,rd-cycle-ns = <100>; |
| 387 |
gpmc,wr-cycle-ns = <100>; |
| 388 |
gpmc,access-ns = <60>; |
| 389 |
gpmc,page-burst-access-ns = <5>; |
| 390 |
gpmc,bus-turnaround-ns = <0>; |
| 391 |
gpmc,cycle2cycle-samecsen; |
| 392 |
gpmc,cycle2cycle-delay-ns = <50>; |
| 393 |
gpmc,wr-data-mux-bus-ns = <75>; |
| 394 |
gpmc,wr-access-ns = <155>; |
| 395 |
|
| 396 |
#address-cells = <1>; |
| 397 |
#size-cells = <1>; |
| 398 |
|
| 399 |
partition@0 { |
| 400 |
label = "MLO"; |
| 401 |
reg = <0 0x80000>; |
| 402 |
}; |
| 403 |
|
| 404 |
partition@80000 { |
| 405 |
label = "u-boot"; |
| 406 |
reg = <0x80000 0x1e0000>; |
| 407 |
}; |
| 408 |
|
| 409 |
partition@260000 { |
| 410 |
label = "u-boot-environment"; |
| 411 |
reg = <0x260000 0x20000>; |
| 412 |
}; |
| 413 |
|
| 414 |
partition@280000 { |
| 415 |
label = "kernel"; |
| 416 |
reg = <0x280000 0x500000>; |
| 417 |
}; |
| 418 |
|
| 419 |
partition@780000 { |
| 420 |
label = "filesystem"; |
| 421 |
reg = <0x780000 0xf880000>; |
| 422 |
}; |
| 423 |
}; |
| 424 |
|
| 425 |
ethernet@7,0 { |
| 426 |
compatible = "smsc,lan9221", "smsc,lan9115"; |
| 427 |
bank-width = <2>; |
| 428 |
gpmc,mux-add-data = <2>; |
| 429 |
gpmc,cs-on-ns = <10>; |
| 430 |
gpmc,cs-rd-off-ns = <60>; |
| 431 |
gpmc,cs-wr-off-ns = <60>; |
| 432 |
gpmc,adv-on-ns = <0>; |
| 433 |
gpmc,adv-rd-off-ns = <10>; |
| 434 |
gpmc,adv-wr-off-ns = <10>; |
| 435 |
gpmc,oe-on-ns = <10>; |
| 436 |
gpmc,oe-off-ns = <60>; |
| 437 |
gpmc,we-on-ns = <10>; |
| 438 |
gpmc,we-off-ns = <60>; |
| 439 |
gpmc,rd-cycle-ns = <100>; |
| 440 |
gpmc,wr-cycle-ns = <100>; |
| 441 |
gpmc,access-ns = <50>; |
| 442 |
gpmc,page-burst-access-ns = <5>; |
| 443 |
gpmc,bus-turnaround-ns = <0>; |
| 444 |
gpmc,cycle2cycle-delay-ns = <75>; |
| 445 |
gpmc,wr-data-mux-bus-ns = <15>; |
| 446 |
gpmc,wr-access-ns = <75>; |
| 447 |
gpmc,cycle2cycle-samecsen; |
| 448 |
gpmc,cycle2cycle-diffcsen; |
| 449 |
vddvario-supply = <®_vcc3>; |
| 450 |
vdd33a-supply = <®_vcc3>; |
| 451 |
reg-io-width = <4>; |
| 452 |
interrupt-parent = <&gpio5>; |
| 453 |
interrupts = <1 0x2>; |
| 454 |
reg = <7 0 0xff>; |
| 455 |
pinctrl-names = "default"; |
| 456 |
pinctrl-0 = <&lan9221_pins>; |
| 457 |
phy-mode = "mii"; |
| 458 |
}; |
| 459 |
}; |