| 1 |
// SPDX-License-Identifier: GPL-2.0-only |
| 2 |
/dts-v1/; |
| 3 |
|
| 4 |
#include "motorola-mapphone-common.dtsi" |
| 5 |
|
| 6 |
/ { |
| 7 |
/* FS USB Host PHY on port 1 for mdm6600 */ |
| 8 |
fsusb1_phy: usb-phy@1 { |
| 9 |
compatible = "motorola,mapphone-mdm6600"; |
| 10 |
pinctrl-0 = <&usb_mdm6600_pins>; |
| 11 |
pinctrl-1 = <&usb_mdm6600_sleep_pins>; |
| 12 |
pinctrl-names = "default", "sleep"; |
| 13 |
enable-gpios = <&gpio3 31 GPIO_ACTIVE_LOW>; /* gpio_95 */ |
| 14 |
power-gpios = <&gpio2 22 GPIO_ACTIVE_HIGH>; /* gpio_54 */ |
| 15 |
reset-gpios = <&gpio2 17 GPIO_ACTIVE_HIGH>; /* gpio_49 */ |
| 16 |
/* mode: gpio_148 gpio_149 */ |
| 17 |
motorola,mode-gpios = <&gpio5 20 GPIO_ACTIVE_HIGH>, |
| 18 |
<&gpio5 21 GPIO_ACTIVE_HIGH>; |
| 19 |
/* cmd: gpio_103 gpio_104 gpio_142 */ |
| 20 |
motorola,cmd-gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>, |
| 21 |
<&gpio4 8 GPIO_ACTIVE_HIGH>, |
| 22 |
<&gpio5 14 GPIO_ACTIVE_HIGH>; |
| 23 |
/* status: gpio_52 gpio_53 gpio_55 */ |
| 24 |
motorola,status-gpios = <&gpio2 20 GPIO_ACTIVE_HIGH>, |
| 25 |
<&gpio2 21 GPIO_ACTIVE_HIGH>, |
| 26 |
<&gpio2 23 GPIO_ACTIVE_HIGH>; |
| 27 |
#phy-cells = <0>; |
| 28 |
}; |
| 29 |
|
| 30 |
/* HS USB host TLL nop-phy on port 2 for w3glte */ |
| 31 |
hsusb2_phy: usb-phy@2 { |
| 32 |
compatible = "usb-nop-xceiv"; |
| 33 |
#phy-cells = <0>; |
| 34 |
}; |
| 35 |
|
| 36 |
pwm8: pwm-8 { |
| 37 |
pinctrl-names = "default"; |
| 38 |
pinctrl-0 = <&vibrator_direction_pin>; |
| 39 |
|
| 40 |
compatible = "ti,omap-dmtimer-pwm"; |
| 41 |
#pwm-cells = <3>; |
| 42 |
ti,timers = <&timer8>; |
| 43 |
ti,clock-source = <0x01>; |
| 44 |
}; |
| 45 |
|
| 46 |
pwm9: pwm-9 { |
| 47 |
pinctrl-names = "default"; |
| 48 |
pinctrl-0 = <&vibrator_enable_pin>; |
| 49 |
|
| 50 |
compatible = "ti,omap-dmtimer-pwm"; |
| 51 |
#pwm-cells = <3>; |
| 52 |
ti,timers = <&timer9>; |
| 53 |
ti,clock-source = <0x01>; |
| 54 |
}; |
| 55 |
|
| 56 |
vibrator { |
| 57 |
compatible = "pwm-vibrator"; |
| 58 |
pwms = <&pwm9 0 10000000 0>, <&pwm8 0 10000000 0>; |
| 59 |
pwm-names = "enable", "direction"; |
| 60 |
direction-duty-cycle-ns = <10000000>; |
| 61 |
}; |
| 62 |
}; |
| 63 |
|
| 64 |
/* Battery NVRAM on 1-wire handled by w1_ds250x driver */ |
| 65 |
&hdqw1w { |
| 66 |
pinctrl-0 = <&hdq_pins>; |
| 67 |
pinctrl-names = "default"; |
| 68 |
ti,mode = "1w"; |
| 69 |
}; |
| 70 |
|
| 71 |
&i2c2 { |
| 72 |
touchscreen@4a { |
| 73 |
compatible = "atmel,maxtouch"; |
| 74 |
reg = <0x4a>; |
| 75 |
pinctrl-names = "default"; |
| 76 |
pinctrl-0 = <&touchscreen_pins>; |
| 77 |
|
| 78 |
reset-gpios = <&gpio6 13 GPIO_ACTIVE_LOW>; /* gpio173 */ |
| 79 |
|
| 80 |
/* gpio_183 with sys_nirq2 pad as wakeup */ |
| 81 |
interrupts-extended = <&gpio6 23 IRQ_TYPE_LEVEL_LOW>, |
| 82 |
<&omap4_pmx_core 0x160>; |
| 83 |
interrupt-names = "irq", "wakeup"; |
| 84 |
wakeup-source; |
| 85 |
}; |
| 86 |
|
| 87 |
isl29030@44 { |
| 88 |
compatible = "isil,isl29030"; |
| 89 |
reg = <0x44>; |
| 90 |
|
| 91 |
pinctrl-names = "default"; |
| 92 |
pinctrl-0 = <&als_proximity_pins>; |
| 93 |
|
| 94 |
interrupt-parent = <&gpio6>; |
| 95 |
interrupts = <17 IRQ_TYPE_LEVEL_LOW>; /* gpio177 */ |
| 96 |
}; |
| 97 |
}; |
| 98 |
|
| 99 |
&omap4_pmx_core { |
| 100 |
hdq_pins: hdq-pins { |
| 101 |
pinctrl-single,pins = < |
| 102 |
/* 0x4a100120 hdq_sio.hdq_sio aa27 */ |
| 103 |
OMAP4_IOPAD(0x120, PIN_INPUT | MUX_MODE0) |
| 104 |
>; |
| 105 |
}; |
| 106 |
|
| 107 |
/* kpd_row0.gpio_178 */ |
| 108 |
tmp105_irq: tmp105-irq-pins { |
| 109 |
pinctrl-single,pins = < |
| 110 |
OMAP4_IOPAD(0x18e, PIN_INPUT_PULLUP | MUX_MODE3) |
| 111 |
>; |
| 112 |
}; |
| 113 |
|
| 114 |
touchscreen_pins: touchscreen-pins { |
| 115 |
pinctrl-single,pins = < |
| 116 |
OMAP4_IOPAD(0x180, PIN_OUTPUT | MUX_MODE3) |
| 117 |
OMAP4_IOPAD(0x1a0, PIN_INPUT_PULLUP | MUX_MODE3) |
| 118 |
>; |
| 119 |
}; |
| 120 |
|
| 121 |
usb_mdm6600_pins: usb-mdm6600-pins { |
| 122 |
pinctrl-single,pins = < |
| 123 |
/* enable 0x4a1000d8 usbb1_ulpitll_dat7.gpio_95 ag16 */ |
| 124 |
OMAP4_IOPAD(0x0d8, PIN_INPUT | MUX_MODE3) |
| 125 |
|
| 126 |
/* power 0x4a10007c gpmc_nwp.gpio_54 c25 */ |
| 127 |
OMAP4_IOPAD(0x07c, PIN_OUTPUT | MUX_MODE3) |
| 128 |
|
| 129 |
/* reset 0x4a100072 gpmc_a25.gpio_49 d20 */ |
| 130 |
OMAP4_IOPAD(0x072, PIN_OUTPUT | MUX_MODE3) |
| 131 |
|
| 132 |
/* mode0/bpwake 0x4a10014e sdmmc5_dat1.gpio_148 af4 */ |
| 133 |
OMAP4_IOPAD(0x14e, PIN_OUTPUT | MUX_MODE3) |
| 134 |
|
| 135 |
/* mode1/apwake 0x4a100150 sdmmc5_dat2.gpio_149 ag3 */ |
| 136 |
OMAP4_IOPAD(0x150, PIN_OFF_OUTPUT_LOW | PIN_INPUT | MUX_MODE3) |
| 137 |
|
| 138 |
/* status0 0x4a10007e gpmc_clk.gpio_55 b22 */ |
| 139 |
OMAP4_IOPAD(0x07e, PIN_INPUT | MUX_MODE3) |
| 140 |
|
| 141 |
/* status1 0x4a10007a gpmc_ncs3.gpio_53 c22 */ |
| 142 |
OMAP4_IOPAD(0x07a, PIN_INPUT | MUX_MODE3) |
| 143 |
|
| 144 |
/* status2 0x4a100078 gpmc_ncs2.gpio_52 d21 */ |
| 145 |
OMAP4_IOPAD(0x078, PIN_INPUT | MUX_MODE3) |
| 146 |
|
| 147 |
/* cmd0 0x4a100094 gpmc_ncs6.gpio_103 c24 */ |
| 148 |
OMAP4_IOPAD(0x094, PIN_OUTPUT | MUX_MODE3) |
| 149 |
|
| 150 |
/* cmd1 0x4a100096 gpmc_ncs7.gpio_104 d24 */ |
| 151 |
OMAP4_IOPAD(0x096, PIN_OUTPUT | MUX_MODE3) |
| 152 |
|
| 153 |
/* cmd2 0x4a100142 uart3_rts_sd.gpio_142 f28 */ |
| 154 |
OMAP4_IOPAD(0x142, PIN_OUTPUT | MUX_MODE3) |
| 155 |
>; |
| 156 |
}; |
| 157 |
|
| 158 |
/* Modem sleep pins to keep gpio_49 high with internal pull */ |
| 159 |
usb_mdm6600_sleep_pins: usb-mdm6600-sleep-pins { |
| 160 |
pinctrl-single,pins = < |
| 161 |
OMAP4_IOPAD(0x0d8, PIN_INPUT | MUX_MODE3) |
| 162 |
OMAP4_IOPAD(0x07c, PIN_OUTPUT | MUX_MODE3) |
| 163 |
OMAP4_IOPAD(0x072, PIN_INPUT_PULLUP | MUX_MODE7) /* Keep gpio_49 reset high */ |
| 164 |
OMAP4_IOPAD(0x14e, PIN_OUTPUT | MUX_MODE3) |
| 165 |
OMAP4_IOPAD(0x150, PIN_OFF_OUTPUT_LOW | PIN_INPUT | MUX_MODE3) |
| 166 |
OMAP4_IOPAD(0x07e, PIN_INPUT | MUX_MODE3) |
| 167 |
OMAP4_IOPAD(0x07a, PIN_INPUT | MUX_MODE3) |
| 168 |
OMAP4_IOPAD(0x078, PIN_INPUT | MUX_MODE3) |
| 169 |
OMAP4_IOPAD(0x094, PIN_OUTPUT | MUX_MODE3) |
| 170 |
OMAP4_IOPAD(0x096, PIN_OUTPUT | MUX_MODE3) |
| 171 |
OMAP4_IOPAD(0x142, PIN_OUTPUT | MUX_MODE3) |
| 172 |
>; |
| 173 |
}; |
| 174 |
|
| 175 |
als_proximity_pins: als-proximity-pins { |
| 176 |
pinctrl-single,pins = < |
| 177 |
OMAP4_IOPAD(0x18c, PIN_INPUT_PULLUP | MUX_MODE3) |
| 178 |
>; |
| 179 |
}; |
| 180 |
|
| 181 |
vibrator_direction_pin: vibrator-direction-pins { |
| 182 |
pinctrl-single,pins = < |
| 183 |
OMAP4_IOPAD(0x1ce, PIN_OUTPUT | MUX_MODE1) /* dmtimer8_pwm_evt (gpio_27) */ |
| 184 |
>; |
| 185 |
}; |
| 186 |
|
| 187 |
vibrator_enable_pin: vibrator-enable-pins { |
| 188 |
pinctrl-single,pins = < |
| 189 |
OMAP4_IOPAD(0X1d0, PIN_OUTPUT | MUX_MODE1) /* dmtimer9_pwm_evt (gpio_28) */ |
| 190 |
>; |
| 191 |
}; |
| 192 |
}; |
| 193 |
|
| 194 |
/* Configure pwm clock source for timers 8 & 9 */ |
| 195 |
&timer8 { |
| 196 |
assigned-clocks = <&abe_clkctrl OMAP4_TIMER8_CLKCTRL 24>; |
| 197 |
assigned-clock-parents = <&sys_32k_ck>; |
| 198 |
}; |
| 199 |
|
| 200 |
&timer9 { |
| 201 |
assigned-clocks = <&l4_per_clkctrl OMAP4_TIMER9_CLKCTRL 24>; |
| 202 |
assigned-clock-parents = <&sys_32k_ck>; |
| 203 |
}; |
| 204 |
|
| 205 |
&usbhsohci { |
| 206 |
phys = <&fsusb1_phy>; |
| 207 |
phy-names = "usb"; |
| 208 |
}; |
| 209 |
|
| 210 |
&usbhsehci { |
| 211 |
phys = <&hsusb2_phy>; |
| 212 |
}; |
| 213 |
|
| 214 |
&usbhshost { |
| 215 |
port1-mode = "ohci-phy-4pin-dpdm"; |
| 216 |
port2-mode = "ehci-tll"; |
| 217 |
}; |
| 218 |
|
| 219 |
&i2c4 { |
| 220 |
ak8975: magnetometer@c { |
| 221 |
compatible = "asahi-kasei,ak8975"; |
| 222 |
reg = <0x0c>; |
| 223 |
|
| 224 |
vdd-supply = <&vhvio>; |
| 225 |
|
| 226 |
interrupt-parent = <&gpio6>; |
| 227 |
interrupts = <15 IRQ_TYPE_EDGE_RISING>; /* gpio175 */ |
| 228 |
|
| 229 |
rotation-matrix = "-1", "0", "0", |
| 230 |
"0", "1", "0", |
| 231 |
"0", "0", "-1"; |
| 232 |
|
| 233 |
}; |
| 234 |
}; |