| 1 |
// SPDX-License-Identifier: GPL-2.0 |
| 2 |
/* |
| 3 |
* Common support for omap3 EVM boards |
| 4 |
*/ |
| 5 |
|
| 6 |
#include <dt-bindings/input/input.h> |
| 7 |
#include "omap-gpmc-smsc911x.dtsi" |
| 8 |
|
| 9 |
/ { |
| 10 |
cpus { |
| 11 |
cpu@0 { |
| 12 |
cpu0-supply = <&vcc>; |
| 13 |
}; |
| 14 |
}; |
| 15 |
|
| 16 |
/* HS USB Port 2 Power */ |
| 17 |
hsusb2_power: hsusb2_power_reg { |
| 18 |
compatible = "regulator-fixed"; |
| 19 |
regulator-name = "hsusb2_vbus"; |
| 20 |
regulator-min-microvolt = <3300000>; |
| 21 |
regulator-max-microvolt = <3300000>; |
| 22 |
gpio = <&gpio1 22 GPIO_ACTIVE_HIGH>; /* gpio_22 */ |
| 23 |
startup-delay-us = <70000>; |
| 24 |
enable-active-high; |
| 25 |
}; |
| 26 |
|
| 27 |
/* HS USB Host PHY on PORT 2 */ |
| 28 |
hsusb2_phy: hsusb2-phy-pins { |
| 29 |
compatible = "usb-nop-xceiv"; |
| 30 |
reset-gpios = <&gpio1 21 GPIO_ACTIVE_LOW>; /* gpio_21 */ |
| 31 |
vcc-supply = <&hsusb2_power>; |
| 32 |
#phy-cells = <0>; |
| 33 |
}; |
| 34 |
|
| 35 |
leds { |
| 36 |
compatible = "gpio-leds"; |
| 37 |
ledb { |
| 38 |
label = "omap3evm::ledb"; |
| 39 |
gpios = <&twl_gpio 19 GPIO_ACTIVE_HIGH>; /* LEDB */ |
| 40 |
linux,default-trigger = "default-on"; |
| 41 |
}; |
| 42 |
}; |
| 43 |
|
| 44 |
wl12xx_vmmc: wl12xx_vmmc { |
| 45 |
compatible = "regulator-fixed"; |
| 46 |
regulator-name = "vwl1271"; |
| 47 |
regulator-min-microvolt = <1800000>; |
| 48 |
regulator-max-microvolt = <1800000>; |
| 49 |
gpio = <&gpio5 22 GPIO_ACTIVE_HIGH>; /* gpio150 */ |
| 50 |
startup-delay-us = <70000>; |
| 51 |
enable-active-high; |
| 52 |
vin-supply = <&vmmc2>; |
| 53 |
}; |
| 54 |
}; |
| 55 |
|
| 56 |
&i2c1 { |
| 57 |
clock-frequency = <2600000>; |
| 58 |
|
| 59 |
twl: twl@48 { |
| 60 |
reg = <0x48>; |
| 61 |
interrupts = <7>; /* SYS_NIRQ cascaded to intc */ |
| 62 |
interrupt-parent = <&intc>; |
| 63 |
}; |
| 64 |
}; |
| 65 |
|
| 66 |
#include "twl4030.dtsi" |
| 67 |
#include "twl4030_omap3.dtsi" |
| 68 |
#include "omap3-panel-sharp-ls037v7dw01.dtsi" |
| 69 |
|
| 70 |
&backlight0 { |
| 71 |
gpios = <&twl_gpio 18 GPIO_ACTIVE_LOW>; |
| 72 |
}; |
| 73 |
|
| 74 |
&twl { |
| 75 |
twl_power: power { |
| 76 |
compatible = "ti,twl4030-power-omap3-evm", "ti,twl4030-power-idle"; |
| 77 |
ti,use_poweroff; |
| 78 |
}; |
| 79 |
}; |
| 80 |
|
| 81 |
&i2c2 { |
| 82 |
clock-frequency = <400000>; |
| 83 |
}; |
| 84 |
|
| 85 |
&i2c3 { |
| 86 |
clock-frequency = <400000>; |
| 87 |
|
| 88 |
/* |
| 89 |
* TVP5146 Video decoder-in for analog input support. |
| 90 |
*/ |
| 91 |
tvp5146@5c { |
| 92 |
compatible = "ti,tvp5146m2"; |
| 93 |
reg = <0x5c>; |
| 94 |
}; |
| 95 |
}; |
| 96 |
|
| 97 |
&lcd_3v3 { |
| 98 |
gpio = <&gpio5 25 GPIO_ACTIVE_LOW>; /* gpio153 */ |
| 99 |
}; |
| 100 |
|
| 101 |
&lcd0 { |
| 102 |
enable-gpios = <&gpio5 24 GPIO_ACTIVE_HIGH>; /* gpio152, lcd INI */ |
| 103 |
reset-gpios = <&gpio5 27 GPIO_ACTIVE_HIGH>; /* gpio155, lcd RESB */ |
| 104 |
mode-gpios = <&gpio5 26 GPIO_ACTIVE_HIGH /* gpio154, lcd MO */ |
| 105 |
&gpio1 2 GPIO_ACTIVE_HIGH /* gpio2, lcd LR */ |
| 106 |
&gpio1 3 GPIO_ACTIVE_HIGH>; /* gpio3, lcd UD */ |
| 107 |
}; |
| 108 |
|
| 109 |
&mcspi1 { |
| 110 |
tsc2046@0 { |
| 111 |
interrupt-parent = <&gpio6>; |
| 112 |
interrupts = <15 0>; /* gpio175 */ |
| 113 |
pendown-gpio = <&gpio6 15 GPIO_ACTIVE_HIGH>; |
| 114 |
}; |
| 115 |
}; |
| 116 |
|
| 117 |
&mmc1 { |
| 118 |
interrupts-extended = <&intc 83 &omap3_pmx_core 0x11a>; |
| 119 |
vmmc-supply = <&vmmc1>; |
| 120 |
vqmmc-supply = <&vsim>; |
| 121 |
bus-width = <8>; |
| 122 |
}; |
| 123 |
|
| 124 |
&mmc2 { |
| 125 |
interrupts-extended = <&intc 86 &omap3_pmx_core 0x12e>; |
| 126 |
vmmc-supply = <&wl12xx_vmmc>; |
| 127 |
non-removable; |
| 128 |
bus-width = <4>; |
| 129 |
cap-power-off-card; |
| 130 |
|
| 131 |
#address-cells = <1>; |
| 132 |
#size-cells = <0>; |
| 133 |
wlcore: wlcore@2 { |
| 134 |
compatible = "ti,wl1271"; |
| 135 |
reg = <2>; |
| 136 |
/* gpio_149 with uart1_rts pad as wakeirq */ |
| 137 |
interrupts-extended = <&gpio5 21 IRQ_TYPE_EDGE_RISING>, |
| 138 |
<&omap3_pmx_core 0x14e>; |
| 139 |
interrupt-names = "irq", "wakeup"; |
| 140 |
ref-clock-frequency = <38400000>; |
| 141 |
}; |
| 142 |
}; |
| 143 |
|
| 144 |
&twl_gpio { |
| 145 |
ti,use-leds; |
| 146 |
}; |
| 147 |
|
| 148 |
&twl_keypad { |
| 149 |
linux,keymap = < |
| 150 |
MATRIX_KEY(2, 2, KEY_1) |
| 151 |
MATRIX_KEY(1, 1, KEY_2) |
| 152 |
MATRIX_KEY(0, 0, KEY_3) |
| 153 |
MATRIX_KEY(3, 2, KEY_4) |
| 154 |
MATRIX_KEY(2, 1, KEY_5) |
| 155 |
MATRIX_KEY(1, 0, KEY_6) |
| 156 |
MATRIX_KEY(1, 3, KEY_7) |
| 157 |
MATRIX_KEY(3, 1, KEY_8) |
| 158 |
MATRIX_KEY(2, 0, KEY_9) |
| 159 |
MATRIX_KEY(2, 3, KEY_KPASTERISK) |
| 160 |
MATRIX_KEY(0, 2, KEY_0) |
| 161 |
MATRIX_KEY(3, 0, KEY_KPDOT) |
| 162 |
/* s4 not wired */ |
| 163 |
MATRIX_KEY(1, 2, KEY_BACKSPACE) |
| 164 |
MATRIX_KEY(0, 1, KEY_ENTER) |
| 165 |
>; |
| 166 |
}; |
| 167 |
|
| 168 |
&usbhshost { |
| 169 |
port2-mode = "ehci-phy"; |
| 170 |
}; |
| 171 |
|
| 172 |
&usbhsehci { |
| 173 |
phys = <0 &hsusb2_phy>; |
| 174 |
}; |
| 175 |
|
| 176 |
&usb_otg_hs { |
| 177 |
interface-type = <0>; |
| 178 |
usb-phy = <&usb2_phy>; |
| 179 |
phys = <&usb2_phy>; |
| 180 |
phy-names = "usb2-phy"; |
| 181 |
mode = <3>; |
| 182 |
power = <50>; |
| 183 |
}; |
| 184 |
|
| 185 |
&gpmc { |
| 186 |
ethernet@gpmc { |
| 187 |
interrupt-parent = <&gpio6>; |
| 188 |
interrupts = <16 8>; |
| 189 |
reg = <5 0 0xff>; |
| 190 |
}; |
| 191 |
}; |
| 192 |
|
| 193 |
&vaux2 { |
| 194 |
regulator-name = "usb_1v8"; |
| 195 |
regulator-min-microvolt = <1800000>; |
| 196 |
regulator-max-microvolt = <1800000>; |
| 197 |
regulator-always-on; |
| 198 |
}; |