| 1 |
// SPDX-License-Identifier: GPL-2.0-only |
| 2 |
/* |
| 3 |
* Copyright (C) 2014 Texas Instruments Incorporated - https://www.ti.com/ |
| 4 |
* |
| 5 |
* Based on "omap4.dtsi" |
| 6 |
*/ |
| 7 |
|
| 8 |
#include "dra7.dtsi" |
| 9 |
|
| 10 |
/ { |
| 11 |
compatible = "ti,dra742", "ti,dra74", "ti,dra7"; |
| 12 |
|
| 13 |
cpus { |
| 14 |
cpu@1 { |
| 15 |
device_type = "cpu"; |
| 16 |
compatible = "arm,cortex-a15"; |
| 17 |
reg = <1>; |
| 18 |
operating-points-v2 = <&cpu0_opp_table>; |
| 19 |
|
| 20 |
clocks = <&dpll_mpu_ck>; |
| 21 |
clock-names = "cpu"; |
| 22 |
|
| 23 |
clock-latency = <300000>; /* From omap-cpufreq driver */ |
| 24 |
|
| 25 |
/* cooling options */ |
| 26 |
#cooling-cells = <2>; /* min followed by max */ |
| 27 |
|
| 28 |
vbb-supply = <&abb_mpu>; |
| 29 |
}; |
| 30 |
}; |
| 31 |
|
| 32 |
aliases { |
| 33 |
rproc0 = &ipu1; |
| 34 |
rproc1 = &ipu2; |
| 35 |
rproc2 = &dsp1; |
| 36 |
rproc3 = &dsp2; |
| 37 |
}; |
| 38 |
|
| 39 |
pmu { |
| 40 |
compatible = "arm,cortex-a15-pmu"; |
| 41 |
interrupt-parent = <&wakeupgen>; |
| 42 |
interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>, |
| 43 |
<GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>; |
| 44 |
}; |
| 45 |
|
| 46 |
ocp { |
| 47 |
dsp2_system: dsp_system@41500000 { |
| 48 |
compatible = "syscon"; |
| 49 |
reg = <0x41500000 0x100>; |
| 50 |
}; |
| 51 |
|
| 52 |
|
| 53 |
target-module@41501000 { |
| 54 |
compatible = "ti,sysc-omap2", "ti,sysc"; |
| 55 |
reg = <0x41501000 0x4>, |
| 56 |
<0x41501010 0x4>, |
| 57 |
<0x41501014 0x4>; |
| 58 |
reg-names = "rev", "sysc", "syss"; |
| 59 |
ti,sysc-sidle = <SYSC_IDLE_FORCE>, |
| 60 |
<SYSC_IDLE_NO>, |
| 61 |
<SYSC_IDLE_SMART>; |
| 62 |
ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY | |
| 63 |
SYSC_OMAP2_SOFTRESET | |
| 64 |
SYSC_OMAP2_AUTOIDLE)>; |
| 65 |
clocks = <&dsp2_clkctrl DRA7_DSP2_MMU0_DSP2_CLKCTRL 0>; |
| 66 |
clock-names = "fck"; |
| 67 |
resets = <&prm_dsp2 1>; |
| 68 |
reset-names = "rstctrl"; |
| 69 |
ranges = <0x0 0x41501000 0x1000>; |
| 70 |
#size-cells = <1>; |
| 71 |
#address-cells = <1>; |
| 72 |
|
| 73 |
mmu0_dsp2: mmu@0 { |
| 74 |
compatible = "ti,dra7-dsp-iommu"; |
| 75 |
reg = <0x0 0x100>; |
| 76 |
interrupts = <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>; |
| 77 |
#iommu-cells = <0>; |
| 78 |
ti,syscon-mmuconfig = <&dsp2_system 0x0>; |
| 79 |
}; |
| 80 |
}; |
| 81 |
|
| 82 |
target-module@41502000 { |
| 83 |
compatible = "ti,sysc-omap2", "ti,sysc"; |
| 84 |
reg = <0x41502000 0x4>, |
| 85 |
<0x41502010 0x4>, |
| 86 |
<0x41502014 0x4>; |
| 87 |
reg-names = "rev", "sysc", "syss"; |
| 88 |
ti,sysc-sidle = <SYSC_IDLE_FORCE>, |
| 89 |
<SYSC_IDLE_NO>, |
| 90 |
<SYSC_IDLE_SMART>; |
| 91 |
ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY | |
| 92 |
SYSC_OMAP2_SOFTRESET | |
| 93 |
SYSC_OMAP2_AUTOIDLE)>; |
| 94 |
|
| 95 |
clocks = <&dsp2_clkctrl DRA7_DSP2_MMU0_DSP2_CLKCTRL 0>; |
| 96 |
clock-names = "fck"; |
| 97 |
resets = <&prm_dsp2 1>; |
| 98 |
reset-names = "rstctrl"; |
| 99 |
ranges = <0x0 0x41502000 0x1000>; |
| 100 |
#size-cells = <1>; |
| 101 |
#address-cells = <1>; |
| 102 |
|
| 103 |
mmu1_dsp2: mmu@0 { |
| 104 |
compatible = "ti,dra7-dsp-iommu"; |
| 105 |
reg = <0x0 0x100>; |
| 106 |
interrupts = <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>; |
| 107 |
#iommu-cells = <0>; |
| 108 |
ti,syscon-mmuconfig = <&dsp2_system 0x1>; |
| 109 |
}; |
| 110 |
}; |
| 111 |
|
| 112 |
dsp2: dsp@41000000 { |
| 113 |
compatible = "ti,dra7-dsp"; |
| 114 |
reg = <0x41000000 0x48000>, |
| 115 |
<0x41600000 0x8000>, |
| 116 |
<0x41700000 0x8000>; |
| 117 |
reg-names = "l2ram", "l1pram", "l1dram"; |
| 118 |
ti,bootreg = <&scm_conf 0x560 10>; |
| 119 |
iommus = <&mmu0_dsp2>, <&mmu1_dsp2>; |
| 120 |
status = "disabled"; |
| 121 |
resets = <&prm_dsp2 0>; |
| 122 |
clocks = <&dsp2_clkctrl DRA7_DSP2_MMU0_DSP2_CLKCTRL 0>; |
| 123 |
firmware-name = "dra7-dsp2-fw.xe66"; |
| 124 |
}; |
| 125 |
}; |
| 126 |
}; |
| 127 |
|
| 128 |
&cpu0_opp_table { |
| 129 |
opp-shared; |
| 130 |
}; |
| 131 |
|
| 132 |
&dss { |
| 133 |
reg = <0 0x80>, |
| 134 |
<0x4054 0x4>, |
| 135 |
<0x4300 0x20>, |
| 136 |
<0x9054 0x4>, |
| 137 |
<0x9300 0x20>; |
| 138 |
reg-names = "dss", "pll1_clkctrl", "pll1", |
| 139 |
"pll2_clkctrl", "pll2"; |
| 140 |
|
| 141 |
clocks = <&dss_clkctrl DRA7_DSS_DSS_CORE_CLKCTRL 8>, |
| 142 |
<&dss_clkctrl DRA7_DSS_DSS_CORE_CLKCTRL 12>, |
| 143 |
<&dss_clkctrl DRA7_DSS_DSS_CORE_CLKCTRL 13>; |
| 144 |
clock-names = "fck", "video1_clk", "video2_clk"; |
| 145 |
}; |
| 146 |
|
| 147 |
&mailbox5 { |
| 148 |
mbox_ipu1_ipc3x: mbox-ipu1-ipc3x { |
| 149 |
ti,mbox-tx = <6 2 2>; |
| 150 |
ti,mbox-rx = <4 2 2>; |
| 151 |
status = "disabled"; |
| 152 |
}; |
| 153 |
mbox_dsp1_ipc3x: mbox-dsp1-ipc3x { |
| 154 |
ti,mbox-tx = <5 2 2>; |
| 155 |
ti,mbox-rx = <1 2 2>; |
| 156 |
status = "disabled"; |
| 157 |
}; |
| 158 |
}; |
| 159 |
|
| 160 |
&mailbox6 { |
| 161 |
mbox_ipu2_ipc3x: mbox-ipu2-ipc3x { |
| 162 |
ti,mbox-tx = <6 2 2>; |
| 163 |
ti,mbox-rx = <4 2 2>; |
| 164 |
status = "disabled"; |
| 165 |
}; |
| 166 |
mbox_dsp2_ipc3x: mbox-dsp2-ipc3x { |
| 167 |
ti,mbox-tx = <5 2 2>; |
| 168 |
ti,mbox-rx = <1 2 2>; |
| 169 |
status = "disabled"; |
| 170 |
}; |
| 171 |
}; |
| 172 |
|
| 173 |
&pcie1_rc { |
| 174 |
compatible = "ti,dra746-pcie-rc", "ti,dra7-pcie"; |
| 175 |
}; |
| 176 |
|
| 177 |
&pcie1_ep { |
| 178 |
compatible = "ti,dra746-pcie-ep", "ti,dra7-pcie-ep"; |
| 179 |
}; |
| 180 |
|
| 181 |
&pcie2_rc { |
| 182 |
compatible = "ti,dra746-pcie-rc", "ti,dra7-pcie"; |
| 183 |
}; |
| 184 |
|
| 185 |
&l4_per3 { |
| 186 |
segment@0 { |
| 187 |
usb4_tm: target-module@140000 { /* 0x48940000, ap 75 3c.0 */ |
| 188 |
compatible = "ti,sysc-omap4", "ti,sysc"; |
| 189 |
reg = <0x140000 0x4>, |
| 190 |
<0x140010 0x4>; |
| 191 |
reg-names = "rev", "sysc"; |
| 192 |
ti,sysc-mask = <SYSC_OMAP4_DMADISABLE>; |
| 193 |
ti,sysc-midle = <SYSC_IDLE_FORCE>, |
| 194 |
<SYSC_IDLE_NO>, |
| 195 |
<SYSC_IDLE_SMART>, |
| 196 |
<SYSC_IDLE_SMART_WKUP>; |
| 197 |
ti,sysc-sidle = <SYSC_IDLE_FORCE>, |
| 198 |
<SYSC_IDLE_NO>, |
| 199 |
<SYSC_IDLE_SMART>, |
| 200 |
<SYSC_IDLE_SMART_WKUP>; |
| 201 |
/* Domains (P, C): l3init_pwrdm, l3init_clkdm */ |
| 202 |
clocks = <&l3init_clkctrl DRA7_L3INIT_USB_OTG_SS4_CLKCTRL 0>; |
| 203 |
clock-names = "fck"; |
| 204 |
#address-cells = <1>; |
| 205 |
#size-cells = <1>; |
| 206 |
ranges = <0x0 0x140000 0x20000>; |
| 207 |
|
| 208 |
omap_dwc3_4: omap_dwc3_4@0 { |
| 209 |
compatible = "ti,dwc3"; |
| 210 |
reg = <0 0x10000>; |
| 211 |
interrupts = <GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH>; |
| 212 |
#address-cells = <1>; |
| 213 |
#size-cells = <1>; |
| 214 |
utmi-mode = <2>; |
| 215 |
ranges; |
| 216 |
status = "disabled"; |
| 217 |
usb4: usb@10000 { |
| 218 |
compatible = "snps,dwc3"; |
| 219 |
reg = <0x10000 0x17000>; |
| 220 |
interrupts = <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>, |
| 221 |
<GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>, |
| 222 |
<GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH>; |
| 223 |
interrupt-names = "peripheral", |
| 224 |
"host", |
| 225 |
"otg"; |
| 226 |
maximum-speed = "high-speed"; |
| 227 |
dr_mode = "otg"; |
| 228 |
}; |
| 229 |
}; |
| 230 |
}; |
| 231 |
}; |
| 232 |
}; |