| 1 |
// SPDX-License-Identifier: GPL-2.0-only |
| 2 |
/* |
| 3 |
* Copyright (C) 2014 Joachim Eastwood <[email protected]> |
| 4 |
* Copyright (C) 2012 Variscite Ltd. - https://www.variscite.com |
| 5 |
*/ |
| 6 |
#include "omap4460.dtsi" |
| 7 |
#include "omap4-mcpdm.dtsi" |
| 8 |
|
| 9 |
/ { |
| 10 |
model = "Variscite VAR-SOM-OM44"; |
| 11 |
compatible = "variscite,var-som-om44", "ti,omap4460", "ti,omap4"; |
| 12 |
|
| 13 |
memory@80000000 { |
| 14 |
device_type = "memory"; |
| 15 |
reg = <0x80000000 0x40000000>; /* 1 GB */ |
| 16 |
}; |
| 17 |
|
| 18 |
sound: sound { |
| 19 |
compatible = "ti,abe-twl6040"; |
| 20 |
ti,model = "VAR-SOM-OM44"; |
| 21 |
|
| 22 |
ti,mclk-freq = <38400000>; |
| 23 |
ti,mcpdm = <&mcpdm>; |
| 24 |
ti,twl6040 = <&twl6040>; |
| 25 |
|
| 26 |
/* Audio routing */ |
| 27 |
ti,audio-routing = |
| 28 |
"Headset Stereophone", "HSOL", |
| 29 |
"Headset Stereophone", "HSOR", |
| 30 |
"AFML", "Line In", |
| 31 |
"AFMR", "Line In"; |
| 32 |
}; |
| 33 |
|
| 34 |
/* HS USB Host PHY on PORT 1 */ |
| 35 |
hsusb1_phy: hsusb1_phy { |
| 36 |
compatible = "usb-nop-xceiv"; |
| 37 |
pinctrl-names = "default"; |
| 38 |
pinctrl-0 = < |
| 39 |
&hsusbb1_phy_clk_pins |
| 40 |
&hsusbb1_phy_rst_pins |
| 41 |
>; |
| 42 |
|
| 43 |
reset-gpios = <&gpio6 17 GPIO_ACTIVE_LOW>; /* gpio 177 */ |
| 44 |
vcc-supply = <&vbat>; |
| 45 |
#phy-cells = <0>; |
| 46 |
|
| 47 |
clocks = <&auxclk3_ck>; |
| 48 |
clock-names = "main_clk"; |
| 49 |
clock-frequency = <19200000>; |
| 50 |
}; |
| 51 |
|
| 52 |
vbat: fixedregulator-vbat { |
| 53 |
compatible = "regulator-fixed"; |
| 54 |
regulator-name = "VBAT"; |
| 55 |
regulator-min-microvolt = <3300000>; |
| 56 |
regulator-max-microvolt = <3300000>; |
| 57 |
regulator-always-on; |
| 58 |
regulator-boot-on; |
| 59 |
}; |
| 60 |
}; |
| 61 |
|
| 62 |
&omap4_pmx_core { |
| 63 |
pinctrl-names = "default"; |
| 64 |
pinctrl-0 = < |
| 65 |
&hsusbb1_pins |
| 66 |
>; |
| 67 |
|
| 68 |
twl6040_pins: twl6040-pins { |
| 69 |
pinctrl-single,pins = < |
| 70 |
OMAP4_IOPAD(0x19c, PIN_OUTPUT | MUX_MODE3) /* fref_clk2_out.gpio_182 */ |
| 71 |
OMAP4_IOPAD(0x1a0, PIN_INPUT | MUX_MODE0) /* sys_nirq2.sys_nirq2 */ |
| 72 |
>; |
| 73 |
}; |
| 74 |
|
| 75 |
tsc2004_pins: tsc2004-pins { |
| 76 |
pinctrl-single,pins = < |
| 77 |
OMAP4_IOPAD(0x090, PIN_INPUT | MUX_MODE3) /* gpmc_ncs4.gpio_101 (irq) */ |
| 78 |
OMAP4_IOPAD(0x092, PIN_OUTPUT | MUX_MODE3) /* gpmc_ncs5.gpio_102 (rst) */ |
| 79 |
>; |
| 80 |
}; |
| 81 |
|
| 82 |
uart3_pins: uart3-pins { |
| 83 |
pinctrl-single,pins = < |
| 84 |
OMAP4_IOPAD(0x140, PIN_INPUT_PULLUP | MUX_MODE0) /* uart3_cts_rctx.uart3_cts_rctx */ |
| 85 |
OMAP4_IOPAD(0x142, PIN_OUTPUT | MUX_MODE0) /* uart3_rts_sd.uart3_rts_sd */ |
| 86 |
OMAP4_IOPAD(0x144, PIN_INPUT | MUX_MODE0) /* uart3_rx_irrx.uart3_rx_irrx */ |
| 87 |
OMAP4_IOPAD(0x146, PIN_OUTPUT | MUX_MODE0) /* uart3_tx_irtx.uart3_tx_irtx */ |
| 88 |
>; |
| 89 |
}; |
| 90 |
|
| 91 |
hsusbb1_pins: hsusbb1-pins { |
| 92 |
pinctrl-single,pins = < |
| 93 |
OMAP4_IOPAD(0x0c2, PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_clk.usbb1_ulpiphy_clk */ |
| 94 |
OMAP4_IOPAD(0x0c4, PIN_OUTPUT | MUX_MODE4) /* usbb1_ulpitll_stp.usbb1_ulpiphy_stp */ |
| 95 |
OMAP4_IOPAD(0x0c6, PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_dir.usbb1_ulpiphy_dir */ |
| 96 |
OMAP4_IOPAD(0x0c8, PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_nxt.usbb1_ulpiphy_nxt */ |
| 97 |
OMAP4_IOPAD(0x0ca, PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_dat0.usbb1_ulpiphy_dat0 */ |
| 98 |
OMAP4_IOPAD(0x0cc, PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_dat1.usbb1_ulpiphy_dat1 */ |
| 99 |
OMAP4_IOPAD(0x0ce, PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_dat2.usbb1_ulpiphy_dat2 */ |
| 100 |
OMAP4_IOPAD(0x0d0, PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_dat3.usbb1_ulpiphy_dat3 */ |
| 101 |
OMAP4_IOPAD(0x0d2, PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_dat4.usbb1_ulpiphy_dat4 */ |
| 102 |
OMAP4_IOPAD(0x0d4, PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_dat5.usbb1_ulpiphy_dat5 */ |
| 103 |
OMAP4_IOPAD(0x0d6, PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_dat6.usbb1_ulpiphy_dat6 */ |
| 104 |
OMAP4_IOPAD(0x0d8, PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_dat7.usbb1_ulpiphy_dat7 */ |
| 105 |
>; |
| 106 |
}; |
| 107 |
|
| 108 |
hsusbb1_phy_rst_pins: hsusbb1-phy-rst-pins { |
| 109 |
pinctrl-single,pins = < |
| 110 |
OMAP4_IOPAD(0x18c, PIN_OUTPUT | MUX_MODE3) /* kpd_row2.gpio_177 */ |
| 111 |
>; |
| 112 |
}; |
| 113 |
|
| 114 |
i2c1_pins: i2c1-pins { |
| 115 |
pinctrl-single,pins = < |
| 116 |
OMAP4_IOPAD(0x122, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_scl */ |
| 117 |
OMAP4_IOPAD(0x124, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_sda */ |
| 118 |
>; |
| 119 |
}; |
| 120 |
|
| 121 |
i2c3_pins: i2c3-pins { |
| 122 |
pinctrl-single,pins = < |
| 123 |
OMAP4_IOPAD(0x12a, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c3_scl */ |
| 124 |
OMAP4_IOPAD(0x12c, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c3_sda */ |
| 125 |
>; |
| 126 |
}; |
| 127 |
|
| 128 |
mmc1_pins: mmc1-pins { |
| 129 |
pinctrl-single,pins = < |
| 130 |
OMAP4_IOPAD(0x0e2, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_clk.sdmmc1_clk */ |
| 131 |
OMAP4_IOPAD(0x0e4, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_cmd.sdmmc1_cmd */ |
| 132 |
OMAP4_IOPAD(0x0e6, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat0.sdmmc1_dat0 */ |
| 133 |
OMAP4_IOPAD(0x0e8, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat1.sdmmc1_dat1 */ |
| 134 |
OMAP4_IOPAD(0x0ea, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat2.sdmmc1_dat2 */ |
| 135 |
OMAP4_IOPAD(0x0ec, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat3.sdmmc1_dat3 */ |
| 136 |
>; |
| 137 |
}; |
| 138 |
}; |
| 139 |
|
| 140 |
&omap4_pmx_wkup { |
| 141 |
pinctrl-names = "default"; |
| 142 |
pinctrl-0 = < |
| 143 |
&hsusbb1_hub_rst_pins |
| 144 |
&lan7500_rst_pins |
| 145 |
>; |
| 146 |
|
| 147 |
hsusbb1_phy_clk_pins: hsusbb1-phy-clk-pins { |
| 148 |
pinctrl-single,pins = < |
| 149 |
OMAP4_IOPAD(0x058, PIN_OUTPUT | MUX_MODE0) /* fref_clk3_out */ |
| 150 |
>; |
| 151 |
}; |
| 152 |
|
| 153 |
hsusbb1_hub_rst_pins: hsusbb1-hub-rst-pins { |
| 154 |
pinctrl-single,pins = < |
| 155 |
OMAP4_IOPAD(0x042, PIN_OUTPUT | MUX_MODE3) /* gpio_wk1 */ |
| 156 |
>; |
| 157 |
}; |
| 158 |
|
| 159 |
lan7500_rst_pins: lan7500-rst-pins { |
| 160 |
pinctrl-single,pins = < |
| 161 |
OMAP4_IOPAD(0x040, PIN_OUTPUT | MUX_MODE3) /* gpio_wk0 */ |
| 162 |
>; |
| 163 |
}; |
| 164 |
}; |
| 165 |
|
| 166 |
&i2c1 { |
| 167 |
pinctrl-names = "default"; |
| 168 |
pinctrl-0 = <&i2c1_pins>; |
| 169 |
status = "okay"; |
| 170 |
|
| 171 |
clock-frequency = <400000>; |
| 172 |
|
| 173 |
twl: twl@48 { |
| 174 |
reg = <0x48>; |
| 175 |
/* SPI = 0, IRQ# = 7, 4 = active high level-sensitive */ |
| 176 |
interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; /* IRQ_SYS_1N cascaded to gic */ |
| 177 |
}; |
| 178 |
|
| 179 |
twl6040: twl@4b { |
| 180 |
compatible = "ti,twl6040"; |
| 181 |
#clock-cells = <0>; |
| 182 |
reg = <0x4b>; |
| 183 |
|
| 184 |
pinctrl-names = "default"; |
| 185 |
pinctrl-0 = <&twl6040_pins>; |
| 186 |
|
| 187 |
/* SPI = 0, IRQ# = 119, 4 = active high level-sensitive */ |
| 188 |
interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>; /* IRQ_SYS_2N cascaded to gic */ |
| 189 |
ti,audpwron-gpio = <&gpio6 22 GPIO_ACTIVE_HIGH>; /* gpio 182 */ |
| 190 |
|
| 191 |
vio-supply = <&v1v8>; |
| 192 |
v2v1-supply = <&v2v1>; |
| 193 |
enable-active-high; |
| 194 |
}; |
| 195 |
}; |
| 196 |
|
| 197 |
#include "twl6030.dtsi" |
| 198 |
#include "twl6030_omap4.dtsi" |
| 199 |
|
| 200 |
&vusim { |
| 201 |
regulator-min-microvolt = <3000000>; |
| 202 |
regulator-max-microvolt = <3000000>; |
| 203 |
regulator-always-on; |
| 204 |
}; |
| 205 |
|
| 206 |
&i2c2 { |
| 207 |
status = "disabled"; |
| 208 |
}; |
| 209 |
|
| 210 |
&i2c3 { |
| 211 |
pinctrl-names = "default"; |
| 212 |
pinctrl-0 = <&i2c3_pins>; |
| 213 |
status = "okay"; |
| 214 |
|
| 215 |
clock-frequency = <400000>; |
| 216 |
|
| 217 |
touchscreen: tsc2004@48 { |
| 218 |
compatible = "ti,tsc2004"; |
| 219 |
reg = <0x48>; |
| 220 |
pinctrl-names = "default"; |
| 221 |
pinctrl-0 = <&tsc2004_pins>; |
| 222 |
interrupt-parent = <&gpio4>; |
| 223 |
interrupts = <5 IRQ_TYPE_LEVEL_LOW>; /* gpio 101 */ |
| 224 |
status = "disabled"; |
| 225 |
}; |
| 226 |
|
| 227 |
tmp105@49 { |
| 228 |
compatible = "ti,tmp105"; |
| 229 |
reg = <0x49>; |
| 230 |
}; |
| 231 |
|
| 232 |
eeprom@50 { |
| 233 |
compatible = "microchip,24c32", "atmel,24c32"; |
| 234 |
reg = <0x50>; |
| 235 |
}; |
| 236 |
}; |
| 237 |
|
| 238 |
&i2c4 { |
| 239 |
status = "disabled"; |
| 240 |
}; |
| 241 |
|
| 242 |
&gpmc { |
| 243 |
status = "disabled"; |
| 244 |
}; |
| 245 |
|
| 246 |
&mcspi1 { |
| 247 |
status = "disabled"; |
| 248 |
}; |
| 249 |
|
| 250 |
&mcspi2 { |
| 251 |
status = "disabled"; |
| 252 |
}; |
| 253 |
|
| 254 |
&mcspi3 { |
| 255 |
status = "disabled"; |
| 256 |
}; |
| 257 |
|
| 258 |
&mcspi4 { |
| 259 |
status = "disabled"; |
| 260 |
}; |
| 261 |
|
| 262 |
&mmc1 { |
| 263 |
pinctrl-names = "default"; |
| 264 |
pinctrl-0 = <&mmc1_pins>; |
| 265 |
vmmc-supply = <&vmmc>; |
| 266 |
bus-width = <4>; |
| 267 |
ti,non-removable; |
| 268 |
status = "okay"; |
| 269 |
}; |
| 270 |
|
| 271 |
&mmc2 { |
| 272 |
status = "disabled"; |
| 273 |
}; |
| 274 |
|
| 275 |
&mmc3 { |
| 276 |
status = "disabled"; |
| 277 |
}; |
| 278 |
|
| 279 |
&mmc4 { |
| 280 |
status = "disabled"; |
| 281 |
}; |
| 282 |
|
| 283 |
&mmc5 { |
| 284 |
status = "disabled"; |
| 285 |
}; |
| 286 |
|
| 287 |
&uart1 { |
| 288 |
status = "disabled"; |
| 289 |
}; |
| 290 |
|
| 291 |
&uart2 { |
| 292 |
status = "disabled"; |
| 293 |
}; |
| 294 |
|
| 295 |
&uart3 { |
| 296 |
pinctrl-names = "default"; |
| 297 |
pinctrl-0 = <&uart3_pins>; |
| 298 |
status = "okay"; |
| 299 |
}; |
| 300 |
|
| 301 |
&uart4 { |
| 302 |
status = "disabled"; |
| 303 |
}; |
| 304 |
|
| 305 |
&keypad { |
| 306 |
status = "disabled"; |
| 307 |
}; |
| 308 |
|
| 309 |
&twl_usb_comparator { |
| 310 |
usb-supply = <&vusb>; |
| 311 |
}; |
| 312 |
|
| 313 |
&usb_otg_hs { |
| 314 |
interface-type = <1>; |
| 315 |
mode = <3>; |
| 316 |
power = <50>; |
| 317 |
}; |
| 318 |
|
| 319 |
&usbhshost { |
| 320 |
port1-mode = "ehci-phy"; |
| 321 |
}; |
| 322 |
|
| 323 |
&usbhsehci { |
| 324 |
phys = <&hsusb1_phy>; |
| 325 |
}; |