| 1 |
// SPDX-License-Identifier: GPL-2.0-only |
| 2 |
/* |
| 3 |
* Copyright (C) 2017 Texas Instruments Incorporated - https://www.ti.com/ |
| 4 |
*/ |
| 5 |
|
| 6 |
#include "dra74-ipu-dsp-common.dtsi" |
| 7 |
#include <dt-bindings/gpio/gpio.h> |
| 8 |
#include <dt-bindings/clock/ti-dra7-atl.h> |
| 9 |
#include <dt-bindings/input/input.h> |
| 10 |
|
| 11 |
/ { |
| 12 |
chosen { |
| 13 |
stdout-path = &uart1; |
| 14 |
}; |
| 15 |
|
| 16 |
extcon_usb1: extcon_usb1 { |
| 17 |
compatible = "linux,extcon-usb-gpio"; |
| 18 |
id-gpios = <&pcf_gpio_21 1 GPIO_ACTIVE_HIGH>; |
| 19 |
}; |
| 20 |
|
| 21 |
extcon_usb2: extcon_usb2 { |
| 22 |
compatible = "linux,extcon-usb-gpio"; |
| 23 |
id-gpios = <&pcf_gpio_21 2 GPIO_ACTIVE_HIGH>; |
| 24 |
}; |
| 25 |
|
| 26 |
sound0: sound0 { |
| 27 |
compatible = "simple-audio-card"; |
| 28 |
simple-audio-card,name = "DRA7xx-EVM"; |
| 29 |
simple-audio-card,widgets = |
| 30 |
"Headphone", "Headphone Jack", |
| 31 |
"Line", "Line Out", |
| 32 |
"Microphone", "Mic Jack", |
| 33 |
"Line", "Line In"; |
| 34 |
simple-audio-card,routing = |
| 35 |
"Headphone Jack", "HPLOUT", |
| 36 |
"Headphone Jack", "HPROUT", |
| 37 |
"Line Out", "LLOUT", |
| 38 |
"Line Out", "RLOUT", |
| 39 |
"MIC3L", "Mic Jack", |
| 40 |
"MIC3R", "Mic Jack", |
| 41 |
"Mic Jack", "Mic Bias", |
| 42 |
"LINE1L", "Line In", |
| 43 |
"LINE1R", "Line In"; |
| 44 |
simple-audio-card,format = "dsp_b"; |
| 45 |
simple-audio-card,bitclock-master = <&sound0_master>; |
| 46 |
simple-audio-card,frame-master = <&sound0_master>; |
| 47 |
simple-audio-card,bitclock-inversion; |
| 48 |
|
| 49 |
sound0_master: simple-audio-card,cpu { |
| 50 |
sound-dai = <&mcasp3>; |
| 51 |
system-clock-frequency = <5644800>; |
| 52 |
}; |
| 53 |
|
| 54 |
simple-audio-card,codec { |
| 55 |
sound-dai = <&tlv320aic3106>; |
| 56 |
clocks = <&atl_clkin2_ck>; |
| 57 |
}; |
| 58 |
}; |
| 59 |
|
| 60 |
leds { |
| 61 |
compatible = "gpio-leds"; |
| 62 |
led0 { |
| 63 |
label = "dra7:usr1"; |
| 64 |
gpios = <&pcf_lcd 4 GPIO_ACTIVE_LOW>; |
| 65 |
default-state = "off"; |
| 66 |
}; |
| 67 |
|
| 68 |
led1 { |
| 69 |
label = "dra7:usr2"; |
| 70 |
gpios = <&pcf_lcd 5 GPIO_ACTIVE_LOW>; |
| 71 |
default-state = "off"; |
| 72 |
}; |
| 73 |
|
| 74 |
led2 { |
| 75 |
label = "dra7:usr3"; |
| 76 |
gpios = <&pcf_lcd 6 GPIO_ACTIVE_LOW>; |
| 77 |
default-state = "off"; |
| 78 |
}; |
| 79 |
|
| 80 |
led3 { |
| 81 |
label = "dra7:usr4"; |
| 82 |
gpios = <&pcf_lcd 7 GPIO_ACTIVE_LOW>; |
| 83 |
default-state = "off"; |
| 84 |
}; |
| 85 |
}; |
| 86 |
|
| 87 |
gpio_keys { |
| 88 |
compatible = "gpio-keys"; |
| 89 |
#address-cells = <1>; |
| 90 |
#size-cells = <0>; |
| 91 |
autorepeat; |
| 92 |
|
| 93 |
USER1 { |
| 94 |
label = "btnUser1"; |
| 95 |
linux,code = <BTN_0>; |
| 96 |
gpios = <&pcf_lcd 2 GPIO_ACTIVE_LOW>; |
| 97 |
}; |
| 98 |
|
| 99 |
USER2 { |
| 100 |
label = "btnUser2"; |
| 101 |
linux,code = <BTN_1>; |
| 102 |
gpios = <&pcf_lcd 3 GPIO_ACTIVE_LOW>; |
| 103 |
}; |
| 104 |
}; |
| 105 |
}; |
| 106 |
|
| 107 |
&i2c3 { |
| 108 |
status = "okay"; |
| 109 |
clock-frequency = <400000>; |
| 110 |
}; |
| 111 |
|
| 112 |
&mcspi1 { |
| 113 |
status = "okay"; |
| 114 |
}; |
| 115 |
|
| 116 |
&mcspi2 { |
| 117 |
status = "okay"; |
| 118 |
}; |
| 119 |
|
| 120 |
&uart1 { |
| 121 |
status = "okay"; |
| 122 |
interrupts-extended = <&crossbar_mpu GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>, |
| 123 |
<&dra7_pmx_core 0x3e0>; |
| 124 |
}; |
| 125 |
|
| 126 |
&uart2 { |
| 127 |
status = "okay"; |
| 128 |
}; |
| 129 |
|
| 130 |
&uart3 { |
| 131 |
status = "okay"; |
| 132 |
}; |
| 133 |
|
| 134 |
&qspi { |
| 135 |
status = "okay"; |
| 136 |
|
| 137 |
spi-max-frequency = <76800000>; |
| 138 |
flash@0 { |
| 139 |
compatible = "s25fl256s1"; |
| 140 |
spi-max-frequency = <76800000>; |
| 141 |
reg = <0>; |
| 142 |
spi-tx-bus-width = <1>; |
| 143 |
spi-rx-bus-width = <4>; |
| 144 |
#address-cells = <1>; |
| 145 |
#size-cells = <1>; |
| 146 |
|
| 147 |
/* MTD partition table. |
| 148 |
* The ROM checks the first four physical blocks |
| 149 |
* for a valid file to boot and the flash here is |
| 150 |
* 64KiB block size. |
| 151 |
*/ |
| 152 |
partition@0 { |
| 153 |
label = "QSPI.SPL"; |
| 154 |
reg = <0x00000000 0x00010000>; |
| 155 |
}; |
| 156 |
partition@1 { |
| 157 |
label = "QSPI.SPL.backup1"; |
| 158 |
reg = <0x00010000 0x00010000>; |
| 159 |
}; |
| 160 |
partition@2 { |
| 161 |
label = "QSPI.SPL.backup2"; |
| 162 |
reg = <0x00020000 0x00010000>; |
| 163 |
}; |
| 164 |
partition@3 { |
| 165 |
label = "QSPI.SPL.backup3"; |
| 166 |
reg = <0x00030000 0x00010000>; |
| 167 |
}; |
| 168 |
partition@4 { |
| 169 |
label = "QSPI.u-boot"; |
| 170 |
reg = <0x00040000 0x00100000>; |
| 171 |
}; |
| 172 |
partition@5 { |
| 173 |
label = "QSPI.u-boot-spl-os"; |
| 174 |
reg = <0x00140000 0x00080000>; |
| 175 |
}; |
| 176 |
partition@6 { |
| 177 |
label = "QSPI.u-boot-env"; |
| 178 |
reg = <0x001c0000 0x00010000>; |
| 179 |
}; |
| 180 |
partition@7 { |
| 181 |
label = "QSPI.u-boot-env.backup1"; |
| 182 |
reg = <0x001d0000 0x0010000>; |
| 183 |
}; |
| 184 |
partition@8 { |
| 185 |
label = "QSPI.kernel"; |
| 186 |
reg = <0x001e0000 0x0800000>; |
| 187 |
}; |
| 188 |
partition@9 { |
| 189 |
label = "QSPI.file-system"; |
| 190 |
reg = <0x009e0000 0x01620000>; |
| 191 |
}; |
| 192 |
}; |
| 193 |
}; |
| 194 |
|
| 195 |
&omap_dwc3_1 { |
| 196 |
extcon = <&extcon_usb1>; |
| 197 |
}; |
| 198 |
|
| 199 |
&usb1 { |
| 200 |
dr_mode = "otg"; |
| 201 |
extcon = <&extcon_usb1>; |
| 202 |
}; |
| 203 |
|
| 204 |
&omap_dwc3_2 { |
| 205 |
extcon = <&extcon_usb2>; |
| 206 |
}; |
| 207 |
|
| 208 |
&usb2 { |
| 209 |
dr_mode = "host"; |
| 210 |
extcon = <&extcon_usb2>; |
| 211 |
}; |
| 212 |
|
| 213 |
&atl { |
| 214 |
assigned-clocks = <&abe_dpll_sys_clk_mux>, |
| 215 |
<&atl_clkctrl DRA7_ATL_ATL_CLKCTRL 26>, |
| 216 |
<&dpll_abe_ck>, |
| 217 |
<&dpll_abe_m2x2_ck>, |
| 218 |
<&atl_clkin2_ck>; |
| 219 |
assigned-clock-parents = <&sys_clkin2>, <&dpll_abe_m2_ck>; |
| 220 |
assigned-clock-rates = <0>, <0>, <180633600>, <361267200>, <5644800>; |
| 221 |
|
| 222 |
status = "okay"; |
| 223 |
|
| 224 |
atl2 { |
| 225 |
bws = <DRA7_ATL_WS_MCASP2_FSX>; |
| 226 |
aws = <DRA7_ATL_WS_MCASP3_FSX>; |
| 227 |
}; |
| 228 |
}; |
| 229 |
|
| 230 |
&mcasp3 { |
| 231 |
#sound-dai-cells = <0>; |
| 232 |
|
| 233 |
assigned-clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP3_CLKCTRL 24>; |
| 234 |
assigned-clock-parents = <&atl_clkin2_ck>; |
| 235 |
|
| 236 |
status = "okay"; |
| 237 |
|
| 238 |
op-mode = <0>; /* MCASP_IIS_MODE */ |
| 239 |
tdm-slots = <2>; |
| 240 |
/* 4 serializer */ |
| 241 |
serial-dir = < /* 0: INACTIVE, 1: TX, 2: RX */ |
| 242 |
1 2 0 0 |
| 243 |
>; |
| 244 |
tx-num-evt = <32>; |
| 245 |
rx-num-evt = <32>; |
| 246 |
}; |
| 247 |
|
| 248 |
&pcie1_rc { |
| 249 |
status = "okay"; |
| 250 |
}; |
| 251 |
|
| 252 |
&mmc4 { |
| 253 |
bus-width = <4>; |
| 254 |
cap-power-off-card; |
| 255 |
keep-power-in-suspend; |
| 256 |
non-removable; |
| 257 |
#address-cells = <1>; |
| 258 |
#size-cells = <0>; |
| 259 |
wifi@2 { |
| 260 |
compatible = "ti,wl1835"; |
| 261 |
reg = <2>; |
| 262 |
interrupt-parent = <&gpio5>; |
| 263 |
interrupts = <7 IRQ_TYPE_EDGE_RISING>; |
| 264 |
}; |
| 265 |
}; |