| 1 |
// SPDX-License-Identifier: GPL-2.0-only |
| 2 |
/* |
| 3 |
* Copyright (C) 2013 Texas Instruments Incorporated - https://www.ti.com/ |
| 4 |
*/ |
| 5 |
#include "omap5.dtsi" |
| 6 |
#include <dt-bindings/interrupt-controller/irq.h> |
| 7 |
#include <dt-bindings/interrupt-controller/arm-gic.h> |
| 8 |
|
| 9 |
/ { |
| 10 |
aliases { |
| 11 |
display0 = &hdmi0; |
| 12 |
}; |
| 13 |
|
| 14 |
chosen { |
| 15 |
stdout-path = &uart3; |
| 16 |
}; |
| 17 |
|
| 18 |
vmain: fixedregulator-vmain { |
| 19 |
compatible = "regulator-fixed"; |
| 20 |
regulator-name = "vmain"; |
| 21 |
regulator-min-microvolt = <5000000>; |
| 22 |
regulator-max-microvolt = <5000000>; |
| 23 |
}; |
| 24 |
|
| 25 |
vsys_cobra: fixedregulator-vsys_cobra { |
| 26 |
compatible = "regulator-fixed"; |
| 27 |
regulator-name = "vsys_cobra"; |
| 28 |
vin-supply = <&vmain>; |
| 29 |
regulator-min-microvolt = <5000000>; |
| 30 |
regulator-max-microvolt = <5000000>; |
| 31 |
}; |
| 32 |
|
| 33 |
vmmcsd_fixed: fixedregulator-mmcsd { |
| 34 |
compatible = "regulator-fixed"; |
| 35 |
regulator-name = "vmmcsd_fixed"; |
| 36 |
regulator-min-microvolt = <3000000>; |
| 37 |
regulator-max-microvolt = <3000000>; |
| 38 |
}; |
| 39 |
|
| 40 |
mmc3_pwrseq: sdhci0_pwrseq { |
| 41 |
compatible = "mmc-pwrseq-simple"; |
| 42 |
clocks = <&clk32kgaudio>; |
| 43 |
clock-names = "ext_clock"; |
| 44 |
}; |
| 45 |
|
| 46 |
vmmcsdio_fixed: fixedregulator-mmcsdio { |
| 47 |
compatible = "regulator-fixed"; |
| 48 |
regulator-name = "vmmcsdio_fixed"; |
| 49 |
regulator-min-microvolt = <1800000>; |
| 50 |
regulator-max-microvolt = <1800000>; |
| 51 |
gpio = <&gpio5 12 GPIO_ACTIVE_HIGH>; /* gpio140 WLAN_EN */ |
| 52 |
enable-active-high; |
| 53 |
startup-delay-us = <70000>; |
| 54 |
pinctrl-names = "default"; |
| 55 |
pinctrl-0 = <&wlan_pins>; |
| 56 |
}; |
| 57 |
|
| 58 |
/* HS USB Host PHY on PORT 2 */ |
| 59 |
hsusb2_phy: hsusb2-phy-pins { |
| 60 |
compatible = "usb-nop-xceiv"; |
| 61 |
reset-gpios = <&gpio3 16 GPIO_ACTIVE_LOW>; /* gpio3_80 HUB_NRESET */ |
| 62 |
clocks = <&auxclk1_ck>; |
| 63 |
clock-names = "main_clk"; |
| 64 |
clock-frequency = <19200000>; |
| 65 |
#phy-cells = <0>; |
| 66 |
}; |
| 67 |
|
| 68 |
/* HS USB Host PHY on PORT 3 */ |
| 69 |
hsusb3_phy: hsusb3_phy { |
| 70 |
compatible = "usb-nop-xceiv"; |
| 71 |
reset-gpios = <&gpio3 15 GPIO_ACTIVE_LOW>; /* gpio3_79 ETH_NRESET */ |
| 72 |
#phy-cells = <0>; |
| 73 |
}; |
| 74 |
|
| 75 |
tpd12s015: encoder { |
| 76 |
compatible = "ti,tpd12s015"; |
| 77 |
|
| 78 |
pinctrl-names = "default"; |
| 79 |
pinctrl-0 = <&tpd12s015_pins>; |
| 80 |
|
| 81 |
/* gpios defined in the board specific dts */ |
| 82 |
|
| 83 |
ports { |
| 84 |
#address-cells = <1>; |
| 85 |
#size-cells = <0>; |
| 86 |
|
| 87 |
port@0 { |
| 88 |
reg = <0>; |
| 89 |
|
| 90 |
tpd12s015_in: endpoint { |
| 91 |
remote-endpoint = <&hdmi_out>; |
| 92 |
}; |
| 93 |
}; |
| 94 |
|
| 95 |
port@1 { |
| 96 |
reg = <1>; |
| 97 |
|
| 98 |
tpd12s015_out: endpoint { |
| 99 |
remote-endpoint = <&hdmi_connector_in>; |
| 100 |
}; |
| 101 |
}; |
| 102 |
}; |
| 103 |
}; |
| 104 |
|
| 105 |
hdmi0: connector { |
| 106 |
compatible = "hdmi-connector"; |
| 107 |
label = "hdmi"; |
| 108 |
|
| 109 |
type = "b"; |
| 110 |
|
| 111 |
port { |
| 112 |
hdmi_connector_in: endpoint { |
| 113 |
remote-endpoint = <&tpd12s015_out>; |
| 114 |
}; |
| 115 |
}; |
| 116 |
}; |
| 117 |
|
| 118 |
sound: sound { |
| 119 |
compatible = "ti,abe-twl6040"; |
| 120 |
ti,model = "omap5-uevm"; |
| 121 |
|
| 122 |
ti,jack-detection; |
| 123 |
ti,mclk-freq = <19200000>; |
| 124 |
|
| 125 |
ti,mcpdm = <&mcpdm>; |
| 126 |
|
| 127 |
ti,twl6040 = <&twl6040>; |
| 128 |
|
| 129 |
/* Audio routing */ |
| 130 |
ti,audio-routing = |
| 131 |
"Headset Stereophone", "HSOL", |
| 132 |
"Headset Stereophone", "HSOR", |
| 133 |
"Line Out", "AUXL", |
| 134 |
"Line Out", "AUXR", |
| 135 |
"HSMIC", "Headset Mic", |
| 136 |
"Headset Mic", "Headset Mic Bias", |
| 137 |
"AFML", "Line In", |
| 138 |
"AFMR", "Line In"; |
| 139 |
}; |
| 140 |
}; |
| 141 |
|
| 142 |
&gpio8 { |
| 143 |
/* TI trees use GPIO instead of msecure, see also muxing */ |
| 144 |
msecure-hog { |
| 145 |
gpio-hog; |
| 146 |
gpios = <10 GPIO_ACTIVE_HIGH>; |
| 147 |
output-high; |
| 148 |
line-name = "gpio8_234/msecure"; |
| 149 |
}; |
| 150 |
}; |
| 151 |
|
| 152 |
&omap5_pmx_core { |
| 153 |
pinctrl-names = "default"; |
| 154 |
pinctrl-0 = < |
| 155 |
&usbhost_pins |
| 156 |
&led_gpio_pins |
| 157 |
>; |
| 158 |
|
| 159 |
twl6040_pins: twl6040-pins { |
| 160 |
pinctrl-single,pins = < |
| 161 |
OMAP5_IOPAD(0x1be, PIN_OUTPUT | MUX_MODE6) /* mcspi1_somi.gpio5_141 */ |
| 162 |
>; |
| 163 |
}; |
| 164 |
|
| 165 |
mcpdm_pins: mcpdm-pins { |
| 166 |
pinctrl-single,pins = < |
| 167 |
OMAP5_IOPAD(0x182, PIN_INPUT_PULLDOWN | MUX_MODE0) /* abe_clks.abe_clks */ |
| 168 |
OMAP5_IOPAD(0x19c, PIN_INPUT_PULLDOWN | MUX_MODE0) /* abemcpdm_ul_data.abemcpdm_ul_data */ |
| 169 |
OMAP5_IOPAD(0x19e, PIN_INPUT_PULLDOWN | MUX_MODE0) /* abemcpdm_dl_data.abemcpdm_dl_data */ |
| 170 |
OMAP5_IOPAD(0x1a0, PIN_INPUT_PULLUP | MUX_MODE0) /* abemcpdm_frame.abemcpdm_frame */ |
| 171 |
OMAP5_IOPAD(0x1a2, PIN_INPUT_PULLDOWN | MUX_MODE0) /* abemcpdm_lb_clk.abemcpdm_lb_clk */ |
| 172 |
>; |
| 173 |
}; |
| 174 |
|
| 175 |
mcbsp1_pins: mcbsp1-pins { |
| 176 |
pinctrl-single,pins = < |
| 177 |
OMAP5_IOPAD(0x18c, PIN_INPUT | MUX_MODE1) /* abedmic_clk2.abemcbsp1_fsx */ |
| 178 |
OMAP5_IOPAD(0x18e, PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* abedmic_clk3.abemcbsp1_dx */ |
| 179 |
OMAP5_IOPAD(0x190, PIN_INPUT | MUX_MODE1) /* abeslimbus1_clock.abemcbsp1_clkx */ |
| 180 |
OMAP5_IOPAD(0x192, PIN_INPUT_PULLDOWN | MUX_MODE1) /* abeslimbus1_data.abemcbsp1_dr */ |
| 181 |
>; |
| 182 |
}; |
| 183 |
|
| 184 |
mcbsp2_pins: mcbsp2-pins { |
| 185 |
pinctrl-single,pins = < |
| 186 |
OMAP5_IOPAD(0x194, PIN_INPUT_PULLDOWN | MUX_MODE0) /* abemcbsp2_dr.abemcbsp2_dr */ |
| 187 |
OMAP5_IOPAD(0x196, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* abemcbsp2_dx.abemcbsp2_dx */ |
| 188 |
OMAP5_IOPAD(0x198, PIN_INPUT | MUX_MODE0) /* abemcbsp2_fsx.abemcbsp2_fsx */ |
| 189 |
OMAP5_IOPAD(0x19a, PIN_INPUT | MUX_MODE0) /* abemcbsp2_clkx.abemcbsp2_clkx */ |
| 190 |
>; |
| 191 |
}; |
| 192 |
|
| 193 |
i2c1_pins: i2c1-pins { |
| 194 |
pinctrl-single,pins = < |
| 195 |
OMAP5_IOPAD(0x1f2, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_scl */ |
| 196 |
OMAP5_IOPAD(0x1f4, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_sda */ |
| 197 |
>; |
| 198 |
}; |
| 199 |
|
| 200 |
mcspi2_pins: mcspi2-pins { |
| 201 |
pinctrl-single,pins = < |
| 202 |
OMAP5_IOPAD(0x0fc, PIN_INPUT | MUX_MODE0) /* mcspi2_clk */ |
| 203 |
OMAP5_IOPAD(0x0fe, PIN_INPUT | MUX_MODE0) /* mcspi2_simo */ |
| 204 |
OMAP5_IOPAD(0x100, PIN_INPUT_PULLUP | MUX_MODE0) /* mcspi2_somi */ |
| 205 |
OMAP5_IOPAD(0x102, PIN_OUTPUT | MUX_MODE0) /* mcspi2_cs0 */ |
| 206 |
>; |
| 207 |
}; |
| 208 |
|
| 209 |
mcspi3_pins: mcspi3-pins { |
| 210 |
pinctrl-single,pins = < |
| 211 |
OMAP5_IOPAD(0x0b8, PIN_INPUT | MUX_MODE1) /* mcspi3_somi */ |
| 212 |
OMAP5_IOPAD(0x0ba, PIN_INPUT | MUX_MODE1) /* mcspi3_cs0 */ |
| 213 |
OMAP5_IOPAD(0x0bc, PIN_INPUT | MUX_MODE1) /* mcspi3_simo */ |
| 214 |
OMAP5_IOPAD(0x0be, PIN_INPUT | MUX_MODE1) /* mcspi3_clk */ |
| 215 |
>; |
| 216 |
}; |
| 217 |
|
| 218 |
mmc3_pins: mmc3-pins { |
| 219 |
pinctrl-single,pins = < |
| 220 |
OMAP5_IOPAD(0x01a4, PIN_INPUT_PULLUP | MUX_MODE0) /* wlsdio_clk */ |
| 221 |
OMAP5_IOPAD(0x01a6, PIN_INPUT_PULLUP | MUX_MODE0) /* wlsdio_cmd */ |
| 222 |
OMAP5_IOPAD(0x01a8, PIN_INPUT_PULLUP | MUX_MODE0) /* wlsdio_data0 */ |
| 223 |
OMAP5_IOPAD(0x01aa, PIN_INPUT_PULLUP | MUX_MODE0) /* wlsdio_data1 */ |
| 224 |
OMAP5_IOPAD(0x01ac, PIN_INPUT_PULLUP | MUX_MODE0) /* wlsdio_data2 */ |
| 225 |
OMAP5_IOPAD(0x01ae, PIN_INPUT_PULLUP | MUX_MODE0) /* wlsdio_data3 */ |
| 226 |
>; |
| 227 |
}; |
| 228 |
|
| 229 |
wlan_pins: wlan-pins { |
| 230 |
pinctrl-single,pins = < |
| 231 |
OMAP5_IOPAD(0x1bc, PIN_OUTPUT | MUX_MODE6) /* mcspi1_clk.gpio5_140 */ |
| 232 |
>; |
| 233 |
}; |
| 234 |
|
| 235 |
/* TI trees use GPIO mode; msecure mode does not work reliably? */ |
| 236 |
palmas_msecure_pins: palmas-msecure-pins { |
| 237 |
pinctrl-single,pins = < |
| 238 |
OMAP5_IOPAD(0x180, PIN_OUTPUT | MUX_MODE6) /* gpio8_234 */ |
| 239 |
>; |
| 240 |
}; |
| 241 |
|
| 242 |
usbhost_pins: usbhost-pins { |
| 243 |
pinctrl-single,pins = < |
| 244 |
OMAP5_IOPAD(0x0c4, PIN_INPUT | MUX_MODE0) /* usbb2_hsic_strobe */ |
| 245 |
OMAP5_IOPAD(0x0c6, PIN_INPUT | MUX_MODE0) /* usbb2_hsic_data */ |
| 246 |
|
| 247 |
OMAP5_IOPAD(0x1de, PIN_INPUT | MUX_MODE0) /* usbb3_hsic_strobe */ |
| 248 |
OMAP5_IOPAD(0x1e0, PIN_INPUT | MUX_MODE0) /* usbb3_hsic_data */ |
| 249 |
|
| 250 |
OMAP5_IOPAD(0x0b0, PIN_OUTPUT | MUX_MODE6) /* gpio3_80 HUB_NRESET */ |
| 251 |
OMAP5_IOPAD(0x0ae, PIN_OUTPUT | MUX_MODE6) /* gpio3_79 ETH_NRESET */ |
| 252 |
>; |
| 253 |
}; |
| 254 |
|
| 255 |
led_gpio_pins: led-gpio-pins { |
| 256 |
pinctrl-single,pins = < |
| 257 |
OMAP5_IOPAD(0x1d6, PIN_OUTPUT | MUX_MODE6) /* uart3_cts_rctx.gpio5_153 */ |
| 258 |
>; |
| 259 |
}; |
| 260 |
|
| 261 |
uart1_pins: uart1-pins { |
| 262 |
pinctrl-single,pins = < |
| 263 |
OMAP5_IOPAD(0x0a0, PIN_OUTPUT | MUX_MODE0) /* uart1_tx.uart1_cts */ |
| 264 |
OMAP5_IOPAD(0x0a2, PIN_INPUT_PULLUP | MUX_MODE0) /* uart1_tx.uart1_cts */ |
| 265 |
OMAP5_IOPAD(0x0a4, PIN_INPUT_PULLUP | MUX_MODE0) /* uart1_rx.uart1_rts */ |
| 266 |
OMAP5_IOPAD(0x0a6, PIN_OUTPUT | MUX_MODE0) /* uart1_rx.uart1_rts */ |
| 267 |
>; |
| 268 |
}; |
| 269 |
|
| 270 |
uart3_pins: uart3-pins { |
| 271 |
pinctrl-single,pins = < |
| 272 |
OMAP5_IOPAD(0x1da, PIN_OUTPUT | MUX_MODE0) /* uart3_rts_irsd.uart3_tx_irtx */ |
| 273 |
OMAP5_IOPAD(0x1dc, PIN_INPUT_PULLUP | MUX_MODE0) /* uart3_rx_irrx.uart3_usbb3_hsic */ |
| 274 |
>; |
| 275 |
}; |
| 276 |
|
| 277 |
uart5_pins: uart5-pins { |
| 278 |
pinctrl-single,pins = < |
| 279 |
OMAP5_IOPAD(0x1b0, PIN_INPUT_PULLUP | MUX_MODE0) /* uart5_rx.uart5_rx */ |
| 280 |
OMAP5_IOPAD(0x1b2, PIN_OUTPUT | MUX_MODE0) /* uart5_tx.uart5_tx */ |
| 281 |
OMAP5_IOPAD(0x1b4, PIN_INPUT_PULLUP | MUX_MODE0) /* uart5_cts.uart5_rts */ |
| 282 |
OMAP5_IOPAD(0x1b6, PIN_OUTPUT | MUX_MODE0) /* uart5_cts.uart5_rts */ |
| 283 |
>; |
| 284 |
}; |
| 285 |
|
| 286 |
dss_hdmi_pins: dss-hdmi-pins { |
| 287 |
pinctrl-single,pins = < |
| 288 |
OMAP5_IOPAD(0x13c, PIN_INPUT | MUX_MODE0) /* hdmi_cec.hdmi_cec */ |
| 289 |
OMAP5_IOPAD(0x140, PIN_INPUT | MUX_MODE0) /* hdmi_ddc_scl.hdmi_ddc_scl */ |
| 290 |
OMAP5_IOPAD(0x142, PIN_INPUT | MUX_MODE0) /* hdmi_ddc_sda.hdmi_ddc_sda */ |
| 291 |
>; |
| 292 |
}; |
| 293 |
|
| 294 |
tpd12s015_pins: tpd12s015-pins { |
| 295 |
pinctrl-single,pins = < |
| 296 |
OMAP5_IOPAD(0x13e, PIN_INPUT_PULLDOWN | MUX_MODE6) /* hdmi_hpd.gpio7_193 */ |
| 297 |
>; |
| 298 |
}; |
| 299 |
}; |
| 300 |
|
| 301 |
&omap5_pmx_wkup { |
| 302 |
pinctrl-names = "default"; |
| 303 |
pinctrl-0 = < |
| 304 |
&usbhost_wkup_pins |
| 305 |
>; |
| 306 |
|
| 307 |
palmas_sys_nirq_pins: palmas-sys-nirq-pins { |
| 308 |
pinctrl-single,pins = < |
| 309 |
/* sys_nirq1 is pulled down as the SoC is inverting it for GIC */ |
| 310 |
OMAP5_IOPAD(0x068, PIN_INPUT_PULLUP | MUX_MODE0) |
| 311 |
>; |
| 312 |
}; |
| 313 |
|
| 314 |
usbhost_wkup_pins: usbhost-wkup-pins { |
| 315 |
pinctrl-single,pins = < |
| 316 |
OMAP5_IOPAD(0x05a, PIN_OUTPUT | MUX_MODE0) /* fref_clk1_out, USB hub clk */ |
| 317 |
>; |
| 318 |
}; |
| 319 |
|
| 320 |
wlcore_irq_pin: wlcore-irq-pin-pins { |
| 321 |
pinctrl-single,pins = < |
| 322 |
OMAP5_IOPAD(0x40, PIN_INPUT | MUX_MODE6) /* llia_wakereqin.gpio1_wk14 */ |
| 323 |
>; |
| 324 |
}; |
| 325 |
}; |
| 326 |
|
| 327 |
&mmc1 { |
| 328 |
vmmc-supply = <&ldo9_reg>; |
| 329 |
bus-width = <4>; |
| 330 |
}; |
| 331 |
|
| 332 |
&mmc2 { |
| 333 |
vmmc-supply = <&vmmcsd_fixed>; |
| 334 |
bus-width = <8>; |
| 335 |
ti,non-removable; |
| 336 |
}; |
| 337 |
|
| 338 |
&mmc3 { |
| 339 |
vmmc-supply = <&vmmcsdio_fixed>; |
| 340 |
mmc-pwrseq = <&mmc3_pwrseq>; |
| 341 |
bus-width = <4>; |
| 342 |
non-removable; |
| 343 |
cap-power-off-card; |
| 344 |
pinctrl-names = "default"; |
| 345 |
pinctrl-0 = <&mmc3_pins>; |
| 346 |
interrupts-extended = <&wakeupgen GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH |
| 347 |
&omap5_pmx_core 0x16a>; |
| 348 |
|
| 349 |
#address-cells = <1>; |
| 350 |
#size-cells = <0>; |
| 351 |
wlcore: wlcore@2 { |
| 352 |
compatible = "ti,wl1271"; |
| 353 |
reg = <2>; |
| 354 |
pinctrl-names = "default"; |
| 355 |
pinctrl-0 = <&wlcore_irq_pin>; |
| 356 |
interrupt-parent = <&gpio1>; |
| 357 |
interrupts = <14 IRQ_TYPE_LEVEL_HIGH>; /* gpio 14 */ |
| 358 |
ref-clock-frequency = <26000000>; |
| 359 |
}; |
| 360 |
}; |
| 361 |
|
| 362 |
&mmc4 { |
| 363 |
status = "disabled"; |
| 364 |
}; |
| 365 |
|
| 366 |
&mmc5 { |
| 367 |
status = "disabled"; |
| 368 |
}; |
| 369 |
|
| 370 |
&i2c1 { |
| 371 |
pinctrl-names = "default"; |
| 372 |
pinctrl-0 = <&i2c1_pins>; |
| 373 |
|
| 374 |
clock-frequency = <400000>; |
| 375 |
|
| 376 |
palmas: palmas@48 { |
| 377 |
compatible = "ti,palmas"; |
| 378 |
/* sys_nirq/ext_sys_irq pins get inverted at mpuss wakeupgen */ |
| 379 |
interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_LOW>; |
| 380 |
reg = <0x48>; |
| 381 |
interrupt-controller; |
| 382 |
#interrupt-cells = <2>; |
| 383 |
ti,system-power-controller; |
| 384 |
ti,mux-pad1 = <0xa1>; |
| 385 |
ti,mux-pad2 = <0x1b>; |
| 386 |
pinctrl-names = "default"; |
| 387 |
pinctrl-0 = <&palmas_sys_nirq_pins &palmas_msecure_pins>; |
| 388 |
|
| 389 |
palmas_gpio: gpio { |
| 390 |
compatible = "ti,palmas-gpio"; |
| 391 |
gpio-controller; |
| 392 |
#gpio-cells = <2>; |
| 393 |
}; |
| 394 |
|
| 395 |
extcon_usb3: palmas_usb { |
| 396 |
compatible = "ti,palmas-usb-vid"; |
| 397 |
ti,enable-vbus-detection; |
| 398 |
ti,enable-id-detection; |
| 399 |
ti,wakeup; |
| 400 |
id-gpios = <&palmas_gpio 0 GPIO_ACTIVE_HIGH>; |
| 401 |
}; |
| 402 |
|
| 403 |
clk32kgaudio: palmas_clk32k@1 { |
| 404 |
compatible = "ti,palmas-clk32kgaudio"; |
| 405 |
#clock-cells = <0>; |
| 406 |
}; |
| 407 |
|
| 408 |
rtc { |
| 409 |
compatible = "ti,palmas-rtc"; |
| 410 |
interrupt-parent = <&palmas>; |
| 411 |
interrupts = <8 IRQ_TYPE_NONE>; |
| 412 |
ti,backup-battery-chargeable; |
| 413 |
ti,backup-battery-charge-high-current; |
| 414 |
}; |
| 415 |
|
| 416 |
gpadc: gpadc { |
| 417 |
compatible = "ti,palmas-gpadc"; |
| 418 |
interrupts = <18 0>, |
| 419 |
<16 0>, |
| 420 |
<17 0>; |
| 421 |
#io-channel-cells = <1>; |
| 422 |
ti,channel0-current-microamp = <5>; |
| 423 |
ti,channel3-current-microamp = <10>; |
| 424 |
}; |
| 425 |
|
| 426 |
palmas_pmic { |
| 427 |
compatible = "ti,palmas-pmic"; |
| 428 |
interrupt-parent = <&palmas>; |
| 429 |
interrupts = <14 IRQ_TYPE_NONE>; |
| 430 |
interrupt-names = "short-irq"; |
| 431 |
|
| 432 |
ti,ldo6-vibrator; |
| 433 |
|
| 434 |
smps123-in-supply = <&vsys_cobra>; |
| 435 |
smps45-in-supply = <&vsys_cobra>; |
| 436 |
smps6-in-supply = <&vsys_cobra>; |
| 437 |
smps7-in-supply = <&vsys_cobra>; |
| 438 |
smps8-in-supply = <&vsys_cobra>; |
| 439 |
smps9-in-supply = <&vsys_cobra>; |
| 440 |
smps10_out2-in-supply = <&vsys_cobra>; |
| 441 |
smps10_out1-in-supply = <&vsys_cobra>; |
| 442 |
ldo1-in-supply = <&vsys_cobra>; |
| 443 |
ldo2-in-supply = <&vsys_cobra>; |
| 444 |
ldo3-in-supply = <&vdds_1v8_main>; |
| 445 |
ldo4-in-supply = <&vdds_1v8_main>; |
| 446 |
ldo5-in-supply = <&vsys_cobra>; |
| 447 |
ldo6-in-supply = <&vdds_1v8_main>; |
| 448 |
ldo7-in-supply = <&vsys_cobra>; |
| 449 |
ldo8-in-supply = <&vsys_cobra>; |
| 450 |
ldo9-in-supply = <&vmmcsd_fixed>; |
| 451 |
ldoln-in-supply = <&vsys_cobra>; |
| 452 |
ldousb-in-supply = <&vsys_cobra>; |
| 453 |
|
| 454 |
regulators { |
| 455 |
smps123_reg: smps123 { |
| 456 |
/* VDD_OPP_MPU */ |
| 457 |
regulator-name = "smps123"; |
| 458 |
regulator-min-microvolt = < 600000>; |
| 459 |
regulator-max-microvolt = <1500000>; |
| 460 |
regulator-always-on; |
| 461 |
regulator-boot-on; |
| 462 |
}; |
| 463 |
|
| 464 |
smps45_reg: smps45 { |
| 465 |
/* VDD_OPP_MM */ |
| 466 |
regulator-name = "smps45"; |
| 467 |
regulator-min-microvolt = < 600000>; |
| 468 |
regulator-max-microvolt = <1310000>; |
| 469 |
regulator-always-on; |
| 470 |
regulator-boot-on; |
| 471 |
}; |
| 472 |
|
| 473 |
smps6_reg: smps6 { |
| 474 |
/* VDD_DDR3 - over VDD_SMPS6 */ |
| 475 |
regulator-name = "smps6"; |
| 476 |
regulator-min-microvolt = <1350000>; |
| 477 |
regulator-max-microvolt = <1350000>; |
| 478 |
regulator-always-on; |
| 479 |
regulator-boot-on; |
| 480 |
}; |
| 481 |
|
| 482 |
vdds_1v8_main: |
| 483 |
smps7_reg: smps7 { |
| 484 |
/* VDDS_1v8_OMAP over VDDS_1v8_MAIN */ |
| 485 |
regulator-name = "smps7"; |
| 486 |
regulator-min-microvolt = <1800000>; |
| 487 |
regulator-max-microvolt = <1800000>; |
| 488 |
regulator-always-on; |
| 489 |
regulator-boot-on; |
| 490 |
}; |
| 491 |
|
| 492 |
smps8_reg: smps8 { |
| 493 |
/* VDD_OPP_CORE */ |
| 494 |
regulator-name = "smps8"; |
| 495 |
regulator-min-microvolt = < 600000>; |
| 496 |
regulator-max-microvolt = <1310000>; |
| 497 |
regulator-always-on; |
| 498 |
regulator-boot-on; |
| 499 |
}; |
| 500 |
|
| 501 |
smps9_reg: smps9 { |
| 502 |
/* VDDA_2v1_AUD over VDD_2v1 */ |
| 503 |
regulator-name = "smps9"; |
| 504 |
regulator-min-microvolt = <2100000>; |
| 505 |
regulator-max-microvolt = <2100000>; |
| 506 |
ti,smps-range = <0x80>; |
| 507 |
}; |
| 508 |
|
| 509 |
smps10_out2_reg: smps10_out2 { |
| 510 |
/* VBUS_5V_OTG */ |
| 511 |
regulator-name = "smps10_out2"; |
| 512 |
regulator-min-microvolt = <5000000>; |
| 513 |
regulator-max-microvolt = <5000000>; |
| 514 |
regulator-always-on; |
| 515 |
regulator-boot-on; |
| 516 |
}; |
| 517 |
|
| 518 |
smps10_out1_reg: smps10_out1 { |
| 519 |
/* VBUS_5V_OTG */ |
| 520 |
regulator-name = "smps10_out1"; |
| 521 |
regulator-min-microvolt = <5000000>; |
| 522 |
regulator-max-microvolt = <5000000>; |
| 523 |
}; |
| 524 |
|
| 525 |
ldo1_reg: ldo1 { |
| 526 |
/* VDDAPHY_CAM: vdda_csiport */ |
| 527 |
regulator-name = "ldo1"; |
| 528 |
regulator-min-microvolt = <1800000>; |
| 529 |
regulator-max-microvolt = <1800000>; |
| 530 |
}; |
| 531 |
|
| 532 |
ldo2_reg: ldo2 { |
| 533 |
/* VCC_2V8_DISP: Does not go anywhere */ |
| 534 |
regulator-name = "ldo2"; |
| 535 |
regulator-min-microvolt = <2800000>; |
| 536 |
regulator-max-microvolt = <2800000>; |
| 537 |
/* Unused */ |
| 538 |
status = "disabled"; |
| 539 |
}; |
| 540 |
|
| 541 |
ldo3_reg: ldo3 { |
| 542 |
/* VDDAPHY_MDM: vdda_lli */ |
| 543 |
regulator-name = "ldo3"; |
| 544 |
regulator-min-microvolt = <1500000>; |
| 545 |
regulator-max-microvolt = <1500000>; |
| 546 |
regulator-boot-on; |
| 547 |
/* Only if Modem is used */ |
| 548 |
status = "disabled"; |
| 549 |
}; |
| 550 |
|
| 551 |
ldo4_reg: ldo4 { |
| 552 |
/* VDDAPHY_DISP: vdda_dsiport/hdmi */ |
| 553 |
regulator-name = "ldo4"; |
| 554 |
regulator-min-microvolt = <1800000>; |
| 555 |
regulator-max-microvolt = <1800000>; |
| 556 |
}; |
| 557 |
|
| 558 |
ldo5_reg: ldo5 { |
| 559 |
/* VDDA_1V8_PHY: usb/sata/hdmi.. */ |
| 560 |
regulator-name = "ldo5"; |
| 561 |
regulator-min-microvolt = <1800000>; |
| 562 |
regulator-max-microvolt = <1800000>; |
| 563 |
regulator-always-on; |
| 564 |
regulator-boot-on; |
| 565 |
}; |
| 566 |
|
| 567 |
ldo6_reg: ldo6 { |
| 568 |
/* VDDS_1V2_WKUP: hsic/ldo_emu_wkup */ |
| 569 |
regulator-name = "ldo6"; |
| 570 |
regulator-min-microvolt = <1200000>; |
| 571 |
regulator-max-microvolt = <1200000>; |
| 572 |
regulator-always-on; |
| 573 |
regulator-boot-on; |
| 574 |
}; |
| 575 |
|
| 576 |
ldo7_reg: ldo7 { |
| 577 |
/* VDD_VPP: vpp1 */ |
| 578 |
regulator-name = "ldo7"; |
| 579 |
regulator-min-microvolt = <2000000>; |
| 580 |
regulator-max-microvolt = <2000000>; |
| 581 |
/* Only for efuse reprograming! */ |
| 582 |
status = "disabled"; |
| 583 |
}; |
| 584 |
|
| 585 |
ldo8_reg: ldo8 { |
| 586 |
/* VDD_3v0: Does not go anywhere */ |
| 587 |
regulator-name = "ldo8"; |
| 588 |
regulator-min-microvolt = <3000000>; |
| 589 |
regulator-max-microvolt = <3000000>; |
| 590 |
regulator-boot-on; |
| 591 |
/* Unused */ |
| 592 |
status = "disabled"; |
| 593 |
}; |
| 594 |
|
| 595 |
ldo9_reg: ldo9 { |
| 596 |
/* VCC_DV_SDIO: vdds_sdcard */ |
| 597 |
regulator-name = "ldo9"; |
| 598 |
regulator-min-microvolt = <1800000>; |
| 599 |
regulator-max-microvolt = <3000000>; |
| 600 |
regulator-boot-on; |
| 601 |
}; |
| 602 |
|
| 603 |
ldoln_reg: ldoln { |
| 604 |
/* VDDA_1v8_REF: vdds_osc/mm_l4per.. */ |
| 605 |
regulator-name = "ldoln"; |
| 606 |
regulator-min-microvolt = <1800000>; |
| 607 |
regulator-max-microvolt = <1800000>; |
| 608 |
regulator-always-on; |
| 609 |
regulator-boot-on; |
| 610 |
}; |
| 611 |
|
| 612 |
ldousb_reg: ldousb { |
| 613 |
/* VDDA_3V_USB: VDDA_USBHS33 */ |
| 614 |
regulator-name = "ldousb"; |
| 615 |
regulator-min-microvolt = <3250000>; |
| 616 |
regulator-max-microvolt = <3250000>; |
| 617 |
regulator-always-on; |
| 618 |
regulator-boot-on; |
| 619 |
}; |
| 620 |
|
| 621 |
regen3_reg: regen3 { |
| 622 |
/* REGEN3 controls LDO9 supply to card */ |
| 623 |
regulator-name = "regen3"; |
| 624 |
regulator-always-on; |
| 625 |
regulator-boot-on; |
| 626 |
}; |
| 627 |
}; |
| 628 |
}; |
| 629 |
|
| 630 |
palmas_power_button: palmas_power_button { |
| 631 |
compatible = "ti,palmas-pwrbutton"; |
| 632 |
interrupt-parent = <&palmas>; |
| 633 |
interrupts = <1 IRQ_TYPE_EDGE_FALLING>; |
| 634 |
wakeup-source; |
| 635 |
}; |
| 636 |
}; |
| 637 |
|
| 638 |
twl6040: twl@4b { |
| 639 |
compatible = "ti,twl6040"; |
| 640 |
#clock-cells = <0>; |
| 641 |
reg = <0x4b>; |
| 642 |
|
| 643 |
pinctrl-names = "default"; |
| 644 |
pinctrl-0 = <&twl6040_pins>; |
| 645 |
|
| 646 |
/* sys_nirq/ext_sys_irq pins get inverted at mpuss wakeupgen */ |
| 647 |
interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_LOW>; |
| 648 |
|
| 649 |
/* audpwron gpio defined in the board specific dts */ |
| 650 |
|
| 651 |
vio-supply = <&smps7_reg>; |
| 652 |
v2v1-supply = <&smps9_reg>; |
| 653 |
enable-active-high; |
| 654 |
|
| 655 |
clocks = <&clk32kgaudio>, <&fref_xtal_ck>; |
| 656 |
clock-names = "clk32k", "mclk"; |
| 657 |
}; |
| 658 |
}; |
| 659 |
|
| 660 |
&mcpdm_module { |
| 661 |
/* Module on the SoC needs external clock from the PMIC */ |
| 662 |
pinctrl-names = "default"; |
| 663 |
pinctrl-0 = <&mcpdm_pins>; |
| 664 |
status = "okay"; |
| 665 |
}; |
| 666 |
|
| 667 |
&mcpdm { |
| 668 |
clocks = <&twl6040>; |
| 669 |
clock-names = "pdmclk"; |
| 670 |
}; |
| 671 |
|
| 672 |
&mcbsp1 { |
| 673 |
pinctrl-names = "default"; |
| 674 |
pinctrl-0 = <&mcbsp1_pins>; |
| 675 |
status = "okay"; |
| 676 |
}; |
| 677 |
|
| 678 |
&mcbsp2 { |
| 679 |
pinctrl-names = "default"; |
| 680 |
pinctrl-0 = <&mcbsp2_pins>; |
| 681 |
status = "okay"; |
| 682 |
}; |
| 683 |
|
| 684 |
&usbhshost { |
| 685 |
port2-mode = "ehci-hsic"; |
| 686 |
port3-mode = "ehci-hsic"; |
| 687 |
}; |
| 688 |
|
| 689 |
&usbhsehci { |
| 690 |
phys = <0 &hsusb2_phy &hsusb3_phy>; |
| 691 |
}; |
| 692 |
|
| 693 |
&usb3 { |
| 694 |
extcon = <&extcon_usb3>; |
| 695 |
vbus-supply = <&smps10_out1_reg>; |
| 696 |
}; |
| 697 |
|
| 698 |
&dwc3 { |
| 699 |
extcon = <&extcon_usb3>; |
| 700 |
dr_mode = "otg"; |
| 701 |
}; |
| 702 |
|
| 703 |
&mcspi1 { |
| 704 |
|
| 705 |
}; |
| 706 |
|
| 707 |
&mcspi2 { |
| 708 |
pinctrl-names = "default"; |
| 709 |
pinctrl-0 = <&mcspi2_pins>; |
| 710 |
}; |
| 711 |
|
| 712 |
&mcspi3 { |
| 713 |
pinctrl-names = "default"; |
| 714 |
pinctrl-0 = <&mcspi3_pins>; |
| 715 |
}; |
| 716 |
|
| 717 |
&uart1 { |
| 718 |
pinctrl-names = "default"; |
| 719 |
pinctrl-0 = <&uart1_pins>; |
| 720 |
}; |
| 721 |
|
| 722 |
&uart3 { |
| 723 |
pinctrl-names = "default"; |
| 724 |
pinctrl-0 = <&uart3_pins>; |
| 725 |
interrupts-extended = <&wakeupgen GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>, |
| 726 |
<&omap5_pmx_core 0x19c>; |
| 727 |
}; |
| 728 |
|
| 729 |
&uart5 { |
| 730 |
pinctrl-names = "default"; |
| 731 |
pinctrl-0 = <&uart5_pins>; |
| 732 |
}; |
| 733 |
|
| 734 |
&cpu0 { |
| 735 |
cpu0-supply = <&smps123_reg>; |
| 736 |
}; |
| 737 |
|
| 738 |
&dss { |
| 739 |
status = "okay"; |
| 740 |
}; |
| 741 |
|
| 742 |
&hdmi { |
| 743 |
status = "okay"; |
| 744 |
|
| 745 |
/* vdda-supply populated in board specific dts file */ |
| 746 |
|
| 747 |
pinctrl-names = "default"; |
| 748 |
pinctrl-0 = <&dss_hdmi_pins>; |
| 749 |
|
| 750 |
port { |
| 751 |
hdmi_out: endpoint { |
| 752 |
remote-endpoint = <&tpd12s015_in>; |
| 753 |
}; |
| 754 |
}; |
| 755 |
}; |