| 1 |
// SPDX-License-Identifier: GPL-2.0-only |
| 2 |
/* |
| 3 |
* Author: Anthoine Bourgeois <[email protected]> |
| 4 |
*/ |
| 5 |
|
| 6 |
#include "omap3-devkit8000-common.dtsi" |
| 7 |
/ { |
| 8 |
aliases { |
| 9 |
display0 = &lcd0; |
| 10 |
display1 = &dvi0; |
| 11 |
display2 = &tv0; |
| 12 |
}; |
| 13 |
|
| 14 |
lcd0: display { |
| 15 |
compatible = "panel-dpi"; |
| 16 |
label = "lcd"; |
| 17 |
|
| 18 |
enable-gpios = <&twl_gpio 18 GPIO_ACTIVE_HIGH>; |
| 19 |
|
| 20 |
port { |
| 21 |
lcd_in: endpoint { |
| 22 |
remote-endpoint = <&dpi_lcd_out>; |
| 23 |
}; |
| 24 |
}; |
| 25 |
}; |
| 26 |
}; |
| 27 |
|
| 28 |
&dss { |
| 29 |
port { |
| 30 |
#address-cells = <1>; |
| 31 |
#size-cells = <0>; |
| 32 |
dpi_lcd_out: endpoint@1 { |
| 33 |
reg = <1>; |
| 34 |
remote-endpoint = <&lcd_in>; |
| 35 |
data-lines = <24>; |
| 36 |
}; |
| 37 |
}; |
| 38 |
}; |
| 39 |
|
| 40 |
&vio { |
| 41 |
regulator-min-microvolt = <1800000>; |
| 42 |
regulator-max-microvolt = <1800000>; |
| 43 |
}; |
| 44 |
|
| 45 |
&mcspi2 { |
| 46 |
|
| 47 |
/* touch controller */ |
| 48 |
ads7846@0 { |
| 49 |
compatible = "ti,ads7846"; |
| 50 |
vcc-supply = <&vio>; |
| 51 |
|
| 52 |
reg = <0>; /* CS0 */ |
| 53 |
spi-max-frequency = <1500000>; |
| 54 |
|
| 55 |
interrupt-parent = <&gpio1>; |
| 56 |
interrupts = <27 0>; /* gpio_27 */ |
| 57 |
pendown-gpio = <&gpio1 27 GPIO_ACTIVE_LOW>; |
| 58 |
|
| 59 |
ti,x-min = /bits/ 16 <0x0>; |
| 60 |
ti,x-max = /bits/ 16 <0x0fff>; |
| 61 |
ti,y-min = /bits/ 16 <0x0>; |
| 62 |
ti,y-max = /bits/ 16 <0x0fff>; |
| 63 |
ti,x-plate-ohms = /bits/ 16 <180>; |
| 64 |
ti,pressure-max = /bits/ 16 <255>; |
| 65 |
ti,debounce-max = /bits/ 16 <10>; |
| 66 |
ti,debounce-tol = /bits/ 16 <5>; |
| 67 |
ti,debounce-rep = /bits/ 16 <1>; |
| 68 |
ti,keep-vref-on; |
| 69 |
ti,settle-delay-usec = /bits/ 16 <150>; |
| 70 |
|
| 71 |
wakeup-source; |
| 72 |
}; |
| 73 |
}; |