| 1 |
// SPDX-License-Identifier: GPL-2.0-only |
| 2 |
/* |
| 3 |
* omap3-n950-n9.dtsi - Device Tree file for Nokia N950 & N9 (common stuff) |
| 4 |
* |
| 5 |
* Written by: Aaro Koskinen <[email protected]> |
| 6 |
*/ |
| 7 |
|
| 8 |
#include "omap36xx.dtsi" |
| 9 |
|
| 10 |
/ { |
| 11 |
cpus { |
| 12 |
cpu@0 { |
| 13 |
cpu0-supply = <&vcc>; |
| 14 |
}; |
| 15 |
}; |
| 16 |
|
| 17 |
memory@80000000 { |
| 18 |
device_type = "memory"; |
| 19 |
reg = <0x80000000 0x40000000>; /* 1 GB */ |
| 20 |
}; |
| 21 |
|
| 22 |
vemmc: fixedregulator0 { |
| 23 |
compatible = "regulator-fixed"; |
| 24 |
regulator-name = "VEMMC"; |
| 25 |
regulator-min-microvolt = <2900000>; |
| 26 |
regulator-max-microvolt = <2900000>; |
| 27 |
gpio = <&gpio5 29 GPIO_ACTIVE_HIGH>; /* gpio line 157 */ |
| 28 |
startup-delay-us = <150>; |
| 29 |
enable-active-high; |
| 30 |
}; |
| 31 |
|
| 32 |
vwlan_fixed: fixedregulator2 { |
| 33 |
compatible = "regulator-fixed"; |
| 34 |
regulator-name = "VWLAN"; |
| 35 |
gpio = <&gpio2 3 GPIO_ACTIVE_HIGH>; /* gpio 35 */ |
| 36 |
enable-active-high; |
| 37 |
}; |
| 38 |
|
| 39 |
leds { |
| 40 |
compatible = "gpio-leds"; |
| 41 |
|
| 42 |
heartbeat { |
| 43 |
label = "debug::sleep"; |
| 44 |
gpios = <&gpio3 28 GPIO_ACTIVE_HIGH>; /* gpio92 */ |
| 45 |
linux,default-trigger = "default-on"; |
| 46 |
pinctrl-names = "default"; |
| 47 |
pinctrl-0 = <&debug_leds>; |
| 48 |
}; |
| 49 |
}; |
| 50 |
|
| 51 |
/* controlled (enabled/disabled) directly by wl1271 */ |
| 52 |
vctcxo: vctcxo { |
| 53 |
compatible = "fixed-clock"; |
| 54 |
#clock-cells = <0>; |
| 55 |
clock-frequency = <38400000>; |
| 56 |
}; |
| 57 |
}; |
| 58 |
|
| 59 |
&omap3_pmx_core { |
| 60 |
accelerator_pins: accelerator-pins { |
| 61 |
pinctrl-single,pins = < |
| 62 |
OMAP3_CORE1_IOPAD(0x21da, PIN_INPUT | MUX_MODE4) /* mcspi2_somi.gpio_180 -> LIS302 INT1 */ |
| 63 |
OMAP3_CORE1_IOPAD(0x21dc, PIN_INPUT | MUX_MODE4) /* mcspi2_cs0.gpio_181 -> LIS302 INT2 */ |
| 64 |
>; |
| 65 |
}; |
| 66 |
|
| 67 |
debug_leds: debug-led-pins { |
| 68 |
pinctrl-single,pins = < |
| 69 |
OMAP3_CORE1_IOPAD(0x2108, PIN_OUTPUT | MUX_MODE4) /* dss_data22.gpio_92 */ |
| 70 |
>; |
| 71 |
}; |
| 72 |
|
| 73 |
mmc2_pins: mmc2-pins { |
| 74 |
pinctrl-single,pins = < |
| 75 |
OMAP3_CORE1_IOPAD(0x2158, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_clk */ |
| 76 |
OMAP3_CORE1_IOPAD(0x215a, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_cmd */ |
| 77 |
OMAP3_CORE1_IOPAD(0x215c, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat0 */ |
| 78 |
OMAP3_CORE1_IOPAD(0x215e, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat1 */ |
| 79 |
OMAP3_CORE1_IOPAD(0x2160, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat2 */ |
| 80 |
OMAP3_CORE1_IOPAD(0x2162, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat3 */ |
| 81 |
>; |
| 82 |
}; |
| 83 |
|
| 84 |
wlan_pins: wlan-pins { |
| 85 |
pinctrl-single,pins = < |
| 86 |
OMAP3_CORE1_IOPAD(0x207c, PIN_OUTPUT | MUX_MODE4) /* gpio 35 - wlan enable */ |
| 87 |
OMAP3_CORE1_IOPAD(0x208a, PIN_INPUT | MUX_MODE4) /* gpio 42 - wlan irq */ |
| 88 |
>; |
| 89 |
}; |
| 90 |
|
| 91 |
ssi_pins: ssi-pins { |
| 92 |
pinctrl-single,pins = < |
| 93 |
OMAP3_CORE1_IOPAD(0x217c, PIN_OUTPUT | MUX_MODE1) /* ssi1_dat_tx */ |
| 94 |
OMAP3_CORE1_IOPAD(0x217e, PIN_OUTPUT | MUX_MODE1) /* ssi1_flag_tx */ |
| 95 |
OMAP3_CORE1_IOPAD(0x2180, PIN_INPUT_PULLUP | MUX_MODE1) /* ssi1_rdy_tx */ |
| 96 |
OMAP3_CORE1_IOPAD(0x2182, PIN_INPUT | MUX_MODE4) /* ssi1_wake_tx (cawake) */ |
| 97 |
OMAP3_CORE1_IOPAD(0x2184, PIN_INPUT | MUX_MODE1) /* ssi1_dat_rx */ |
| 98 |
OMAP3_CORE1_IOPAD(0x2186, PIN_INPUT | MUX_MODE1) /* ssi1_flag_rx */ |
| 99 |
OMAP3_CORE1_IOPAD(0x2188, PIN_OUTPUT | MUX_MODE1) /* ssi1_rdy_rx */ |
| 100 |
OMAP3_CORE1_IOPAD(0x218a, PIN_OUTPUT | MUX_MODE1) /* ssi1_wake */ |
| 101 |
>; |
| 102 |
}; |
| 103 |
|
| 104 |
ssi_pins_idle: ssi-idle-pins { |
| 105 |
pinctrl-single,pins = < |
| 106 |
OMAP3_CORE1_IOPAD(0x217c, PIN_OUTPUT | MUX_MODE7) /* ssi1_dat_tx */ |
| 107 |
OMAP3_CORE1_IOPAD(0x217e, PIN_OUTPUT | MUX_MODE7) /* ssi1_flag_tx */ |
| 108 |
OMAP3_CORE1_IOPAD(0x2180, PIN_INPUT_PULLDOWN | MUX_MODE7) /* ssi1_rdy_tx */ |
| 109 |
OMAP3_CORE1_IOPAD(0x2182, PIN_INPUT | MUX_MODE4) /* ssi1_wake_tx (cawake) */ |
| 110 |
OMAP3_CORE1_IOPAD(0x2184, PIN_INPUT | MUX_MODE7) /* ssi1_dat_rx */ |
| 111 |
OMAP3_CORE1_IOPAD(0x2186, PIN_INPUT | MUX_MODE7) /* ssi1_flag_rx */ |
| 112 |
OMAP3_CORE1_IOPAD(0x2188, PIN_OUTPUT | MUX_MODE4) /* ssi1_rdy_rx */ |
| 113 |
OMAP3_CORE1_IOPAD(0x218a, PIN_OUTPUT | MUX_MODE7) /* ssi1_wake */ |
| 114 |
>; |
| 115 |
}; |
| 116 |
|
| 117 |
modem_pins1: modem-core1-pins { |
| 118 |
pinctrl-single,pins = < |
| 119 |
OMAP3_CORE1_IOPAD(0x207a, PIN_INPUT | MUX_MODE4) /* gpio_34 (ape_rst_rq) */ |
| 120 |
OMAP3_CORE1_IOPAD(0x2100, PIN_OUTPUT | MUX_MODE4) /* gpio_88 (cmt_rst_rq) */ |
| 121 |
OMAP3_CORE1_IOPAD(0x210a, PIN_OUTPUT | MUX_MODE4) /* gpio_93 (cmt_apeslpx) */ |
| 122 |
>; |
| 123 |
}; |
| 124 |
|
| 125 |
uart2_pins: uart2-pins { |
| 126 |
pinctrl-single,pins = < |
| 127 |
OMAP3_CORE1_IOPAD(0x2174, PIN_INPUT_PULLUP | MUX_MODE0) /* uart2_cts */ |
| 128 |
OMAP3_CORE1_IOPAD(0x2176, PIN_OUTPUT | MUX_MODE0) /* uart2_rts */ |
| 129 |
OMAP3_CORE1_IOPAD(0x2178, PIN_OUTPUT | MUX_MODE0) /* uart2_tx */ |
| 130 |
OMAP3_CORE1_IOPAD(0x217a, PIN_INPUT | MUX_MODE0) /* uart2_rx */ |
| 131 |
>; |
| 132 |
}; |
| 133 |
}; |
| 134 |
|
| 135 |
&omap3_pmx_core2 { |
| 136 |
modem_pins2: modem-core2-pins { |
| 137 |
pinctrl-single,pins = < |
| 138 |
OMAP3630_CORE2_IOPAD(0x25ec, PIN_OUTPUT | MUX_MODE4) /* gpio_23 (cmt_en) */ |
| 139 |
>; |
| 140 |
}; |
| 141 |
}; |
| 142 |
|
| 143 |
&i2c1 { |
| 144 |
clock-frequency = <2900000>; |
| 145 |
|
| 146 |
twl: twl@48 { |
| 147 |
reg = <0x48>; |
| 148 |
interrupts = <7>; /* SYS_NIRQ cascaded to intc */ |
| 149 |
interrupt-parent = <&intc>; |
| 150 |
}; |
| 151 |
}; |
| 152 |
|
| 153 |
/include/ "twl4030.dtsi" |
| 154 |
|
| 155 |
&twl { |
| 156 |
compatible = "ti,twl5031"; |
| 157 |
|
| 158 |
twl_power: power { |
| 159 |
compatible = "ti,twl4030-power"; |
| 160 |
ti,use_poweroff; |
| 161 |
}; |
| 162 |
}; |
| 163 |
|
| 164 |
&twl_gpio { |
| 165 |
ti,pullups = <0x000001>; /* BIT(0) */ |
| 166 |
ti,pulldowns = <0x008106>; /* BIT(1) | BIT(2) | BIT(8) | BIT(15) */ |
| 167 |
}; |
| 168 |
|
| 169 |
&vdac { |
| 170 |
regulator-name = "vdac"; |
| 171 |
regulator-min-microvolt = <1800000>; |
| 172 |
regulator-max-microvolt = <1800000>; |
| 173 |
}; |
| 174 |
|
| 175 |
&vpll1 { |
| 176 |
regulator-name = "vpll1"; |
| 177 |
regulator-min-microvolt = <1800000>; |
| 178 |
regulator-max-microvolt = <1800000>; |
| 179 |
}; |
| 180 |
|
| 181 |
&vpll2 { |
| 182 |
regulator-name = "vpll2"; |
| 183 |
regulator-min-microvolt = <1800000>; |
| 184 |
regulator-max-microvolt = <1800000>; |
| 185 |
}; |
| 186 |
|
| 187 |
&vaux1 { |
| 188 |
regulator-name = "vaux1"; |
| 189 |
regulator-min-microvolt = <2800000>; |
| 190 |
regulator-max-microvolt = <2800000>; |
| 191 |
}; |
| 192 |
|
| 193 |
/* CSI-2 receiver */ |
| 194 |
&vaux2 { |
| 195 |
regulator-name = "vaux2"; |
| 196 |
regulator-min-microvolt = <1800000>; |
| 197 |
regulator-max-microvolt = <1800000>; |
| 198 |
}; |
| 199 |
|
| 200 |
/* Cameras */ |
| 201 |
&vaux3 { |
| 202 |
regulator-name = "vaux3"; |
| 203 |
regulator-min-microvolt = <2800000>; |
| 204 |
regulator-max-microvolt = <2800000>; |
| 205 |
}; |
| 206 |
|
| 207 |
&vaux4 { |
| 208 |
regulator-name = "vaux4"; |
| 209 |
regulator-min-microvolt = <2800000>; |
| 210 |
regulator-max-microvolt = <2800000>; |
| 211 |
}; |
| 212 |
|
| 213 |
&vmmc1 { |
| 214 |
regulator-name = "vmmc1"; |
| 215 |
regulator-min-microvolt = <1850000>; |
| 216 |
regulator-max-microvolt = <3150000>; |
| 217 |
}; |
| 218 |
|
| 219 |
&vmmc2 { |
| 220 |
regulator-name = "vmmc2"; |
| 221 |
regulator-min-microvolt = <3000000>; |
| 222 |
regulator-max-microvolt = <3000000>; |
| 223 |
}; |
| 224 |
|
| 225 |
&vintana1 { |
| 226 |
regulator-name = "vintana1"; |
| 227 |
regulator-min-microvolt = <1500000>; |
| 228 |
regulator-max-microvolt = <1500000>; |
| 229 |
}; |
| 230 |
|
| 231 |
&vintana2 { |
| 232 |
regulator-name = "vintana2"; |
| 233 |
regulator-min-microvolt = <2750000>; |
| 234 |
regulator-max-microvolt = <2750000>; |
| 235 |
}; |
| 236 |
|
| 237 |
&vintdig { |
| 238 |
regulator-name = "vintdig"; |
| 239 |
regulator-min-microvolt = <1500000>; |
| 240 |
regulator-max-microvolt = <1500000>; |
| 241 |
}; |
| 242 |
|
| 243 |
&vsim { |
| 244 |
regulator-name = "vsim"; |
| 245 |
regulator-min-microvolt = <1800000>; |
| 246 |
regulator-max-microvolt = <1800000>; |
| 247 |
}; |
| 248 |
|
| 249 |
&vio { |
| 250 |
regulator-name = "vio"; |
| 251 |
regulator-min-microvolt = <1800000>; |
| 252 |
regulator-max-microvolt = <1800000>; |
| 253 |
}; |
| 254 |
|
| 255 |
&i2c2 { |
| 256 |
clock-frequency = <400000>; |
| 257 |
|
| 258 |
as3645a@30 { |
| 259 |
#address-cells = <1>; |
| 260 |
#size-cells = <0>; |
| 261 |
reg = <0x30>; |
| 262 |
compatible = "ams,as3645a"; |
| 263 |
as3645a_flash: flash@0 { |
| 264 |
reg = <0x0>; |
| 265 |
flash-timeout-us = <150000>; |
| 266 |
flash-max-microamp = <320000>; |
| 267 |
led-max-microamp = <60000>; |
| 268 |
ams,input-max-microamp = <1750000>; |
| 269 |
}; |
| 270 |
as3645a_indicator: indicator@1 { |
| 271 |
reg = <0x1>; |
| 272 |
led-max-microamp = <10000>; |
| 273 |
}; |
| 274 |
}; |
| 275 |
}; |
| 276 |
|
| 277 |
&i2c3 { |
| 278 |
clock-frequency = <400000>; |
| 279 |
|
| 280 |
lis302: lis302@1d { |
| 281 |
compatible = "st,lis3lv02d"; |
| 282 |
reg = <0x1d>; |
| 283 |
|
| 284 |
Vdd-supply = <&vaux1>; |
| 285 |
Vdd_IO-supply = <&vio>; |
| 286 |
|
| 287 |
pinctrl-names = "default"; |
| 288 |
pinctrl-0 = <&accelerator_pins>; |
| 289 |
|
| 290 |
interrupts-extended = <&gpio6 20 IRQ_TYPE_EDGE_FALLING>, <&gpio6 21 IRQ_TYPE_EDGE_FALLING>; /* 180, 181 */ |
| 291 |
|
| 292 |
/* click flags */ |
| 293 |
st,click-single-x; |
| 294 |
st,click-single-y; |
| 295 |
st,click-single-z; |
| 296 |
|
| 297 |
/* Limits are 0.5g * value */ |
| 298 |
st,click-threshold-x = <8>; |
| 299 |
st,click-threshold-y = <8>; |
| 300 |
st,click-threshold-z = <10>; |
| 301 |
|
| 302 |
/* Click must be longer than time limit */ |
| 303 |
st,click-time-limit = <9>; |
| 304 |
|
| 305 |
/* Kind of debounce filter */ |
| 306 |
st,click-latency = <50>; |
| 307 |
|
| 308 |
st,wakeup-x-hi; |
| 309 |
st,wakeup-y-hi; |
| 310 |
st,wakeup-threshold = <(800/18)>; /* millig-value / 18 to get HW values */ |
| 311 |
|
| 312 |
st,wakeup2-z-hi; |
| 313 |
st,wakeup2-threshold = <(1000/18)>; /* millig-value / 18 to get HW values */ |
| 314 |
|
| 315 |
st,highpass-cutoff-hz = <2>; |
| 316 |
|
| 317 |
/* Interrupt line 1 for thresholds */ |
| 318 |
st,irq1-ff-wu-1; |
| 319 |
st,irq1-ff-wu-2; |
| 320 |
/* Interrupt line 2 for click detection */ |
| 321 |
st,irq2-click; |
| 322 |
|
| 323 |
st,wu-duration-1 = <8>; |
| 324 |
st,wu-duration-2 = <8>; |
| 325 |
}; |
| 326 |
}; |
| 327 |
|
| 328 |
&mmc1 { |
| 329 |
status = "disabled"; |
| 330 |
}; |
| 331 |
|
| 332 |
&mmc2 { |
| 333 |
pinctrl-names = "default"; |
| 334 |
pinctrl-0 = <&mmc2_pins>; |
| 335 |
vmmc-supply = <&vemmc>; |
| 336 |
bus-width = <4>; |
| 337 |
ti,non-removable; |
| 338 |
}; |
| 339 |
|
| 340 |
&mmc3 { |
| 341 |
status = "disabled"; |
| 342 |
}; |
| 343 |
|
| 344 |
/* RNG not directly accessible on N950/N9. */ |
| 345 |
&rng_target { |
| 346 |
status = "disabled"; |
| 347 |
}; |
| 348 |
|
| 349 |
&usb_otg_hs { |
| 350 |
interface-type = <0>; |
| 351 |
usb-phy = <&usb2_phy>; |
| 352 |
phys = <&usb2_phy>; |
| 353 |
phy-names = "usb2-phy"; |
| 354 |
mode = <3>; |
| 355 |
power = <50>; |
| 356 |
}; |
| 357 |
|
| 358 |
&gpmc { |
| 359 |
ranges = <0 0 0x04000000 0x1000000>; /* CS0: 16MB for OneNAND */ |
| 360 |
|
| 361 |
onenand@0,0 { |
| 362 |
#address-cells = <1>; |
| 363 |
#size-cells = <1>; |
| 364 |
compatible = "ti,omap2-onenand"; |
| 365 |
reg = <0 0 0x20000>; /* CS0, offset 0, IO size 128K */ |
| 366 |
|
| 367 |
/* |
| 368 |
* These timings are based on CONFIG_OMAP_GPMC_DEBUG=y reported |
| 369 |
* bootloader set values when booted with v4.19 using both N950 |
| 370 |
* and N9 devices (OneNAND Manufacturer: Samsung): |
| 371 |
* |
| 372 |
* gpmc cs0 before gpmc_cs_program_settings: |
| 373 |
* cs0 GPMC_CS_CONFIG1: 0xfd001202 |
| 374 |
* cs0 GPMC_CS_CONFIG2: 0x00181800 |
| 375 |
* cs0 GPMC_CS_CONFIG3: 0x00030300 |
| 376 |
* cs0 GPMC_CS_CONFIG4: 0x18001804 |
| 377 |
* cs0 GPMC_CS_CONFIG5: 0x03171d1d |
| 378 |
* cs0 GPMC_CS_CONFIG6: 0x97080000 |
| 379 |
*/ |
| 380 |
gpmc,sync-read; |
| 381 |
gpmc,sync-write; |
| 382 |
gpmc,burst-length = <16>; |
| 383 |
gpmc,burst-read; |
| 384 |
gpmc,burst-wrap; |
| 385 |
gpmc,burst-write; |
| 386 |
gpmc,device-width = <2>; |
| 387 |
gpmc,mux-add-data = <2>; |
| 388 |
gpmc,cs-on-ns = <0>; |
| 389 |
gpmc,cs-rd-off-ns = <122>; |
| 390 |
gpmc,cs-wr-off-ns = <122>; |
| 391 |
gpmc,adv-on-ns = <0>; |
| 392 |
gpmc,adv-rd-off-ns = <15>; |
| 393 |
gpmc,adv-wr-off-ns = <15>; |
| 394 |
gpmc,oe-on-ns = <20>; |
| 395 |
gpmc,oe-off-ns = <122>; |
| 396 |
gpmc,we-on-ns = <0>; |
| 397 |
gpmc,we-off-ns = <122>; |
| 398 |
gpmc,rd-cycle-ns = <148>; |
| 399 |
gpmc,wr-cycle-ns = <148>; |
| 400 |
gpmc,access-ns = <117>; |
| 401 |
gpmc,page-burst-access-ns = <15>; |
| 402 |
gpmc,bus-turnaround-ns = <0>; |
| 403 |
gpmc,cycle2cycle-delay-ns = <0>; |
| 404 |
gpmc,wait-monitoring-ns = <0>; |
| 405 |
gpmc,clk-activation-ns = <10>; |
| 406 |
gpmc,wr-data-mux-bus-ns = <40>; |
| 407 |
gpmc,wr-access-ns = <117>; |
| 408 |
|
| 409 |
gpmc,sync-clk-ps = <15000>; /* TBC; Where this value came? */ |
| 410 |
|
| 411 |
/* |
| 412 |
* MTD partition table corresponding to Nokia's MeeGo 1.2 |
| 413 |
* Harmattan release. |
| 414 |
*/ |
| 415 |
partition@0 { |
| 416 |
label = "bootloader"; |
| 417 |
reg = <0x00000000 0x00100000>; |
| 418 |
}; |
| 419 |
partition@1 { |
| 420 |
label = "config"; |
| 421 |
reg = <0x00100000 0x002c0000>; |
| 422 |
}; |
| 423 |
partition@2 { |
| 424 |
label = "kernel"; |
| 425 |
reg = <0x003c0000 0x01000000>; |
| 426 |
}; |
| 427 |
partition@3 { |
| 428 |
label = "log"; |
| 429 |
reg = <0x013c0000 0x00200000>; |
| 430 |
}; |
| 431 |
partition@4 { |
| 432 |
label = "var"; |
| 433 |
reg = <0x015c0000 0x1ca40000>; |
| 434 |
}; |
| 435 |
partition@5 { |
| 436 |
label = "moslo"; |
| 437 |
reg = <0x1e000000 0x02000000>; |
| 438 |
}; |
| 439 |
partition@6 { |
| 440 |
label = "omap2-onenand"; |
| 441 |
reg = <0x00000000 0x20000000>; |
| 442 |
}; |
| 443 |
}; |
| 444 |
}; |
| 445 |
|
| 446 |
&ssi_port1 { |
| 447 |
pinctrl-names = "default", "idle"; |
| 448 |
pinctrl-0 = <&ssi_pins>; |
| 449 |
pinctrl-1 = <&ssi_pins_idle>; |
| 450 |
|
| 451 |
ti,ssi-cawake-gpio = <&gpio5 23 GPIO_ACTIVE_HIGH>; /* 151 */ |
| 452 |
|
| 453 |
modem: hsi-client { |
| 454 |
pinctrl-names = "default"; |
| 455 |
pinctrl-0 = <&modem_pins1 &modem_pins2>; |
| 456 |
|
| 457 |
hsi-channel-ids = <0>, <1>, <2>, <3>; |
| 458 |
hsi-channel-names = "mcsaab-control", |
| 459 |
"speech-control", |
| 460 |
"speech-data", |
| 461 |
"mcsaab-data"; |
| 462 |
hsi-speed-kbps = <96000>; |
| 463 |
hsi-mode = "frame"; |
| 464 |
hsi-flow = "synchronized"; |
| 465 |
hsi-arb-mode = "round-robin"; |
| 466 |
|
| 467 |
interrupts-extended = <&gpio2 2 IRQ_TYPE_EDGE_RISING>; /* gpio 34 */ |
| 468 |
|
| 469 |
gpios = <&gpio3 29 GPIO_ACTIVE_HIGH>, /* gpio 93 */ |
| 470 |
<&gpio3 24 GPIO_ACTIVE_HIGH>, /* gpio 88 */ |
| 471 |
<&gpio1 23 GPIO_ACTIVE_HIGH>; /* gpio 23 */ |
| 472 |
gpio-names = "cmt_apeslpx", |
| 473 |
"cmt_rst_rq", |
| 474 |
"cmt_en"; |
| 475 |
}; |
| 476 |
}; |
| 477 |
|
| 478 |
&ssi_port2 { |
| 479 |
status = "disabled"; |
| 480 |
}; |
| 481 |
|
| 482 |
&uart2 { |
| 483 |
pinctrl-names = "default"; |
| 484 |
pinctrl-0 = <&uart2_pins>; |
| 485 |
|
| 486 |
bluetooth { |
| 487 |
compatible = "ti,wl1271-bluetooth-nokia", "nokia,h4p-bluetooth"; |
| 488 |
|
| 489 |
reset-gpios = <&gpio1 26 GPIO_ACTIVE_LOW>; /* 26 */ |
| 490 |
host-wakeup-gpios = <&gpio4 5 GPIO_ACTIVE_HIGH>; /* 101 */ |
| 491 |
bluetooth-wakeup-gpios = <&gpio2 5 GPIO_ACTIVE_HIGH>; /* 37 */ |
| 492 |
|
| 493 |
clocks = <&vctcxo>; |
| 494 |
clock-names = "sysclk"; |
| 495 |
}; |
| 496 |
}; |
| 497 |
|
| 498 |
&aes1_target { |
| 499 |
status = "disabled"; |
| 500 |
}; |
| 501 |
|
| 502 |
&aes2_target { |
| 503 |
status = "disabled"; |
| 504 |
}; |