| 1 |
// SPDX-License-Identifier: GPL-2.0-only |
| 2 |
/* |
| 3 |
* Copyright (C) 2014 Florian Vaussard, EPFL Mobots group |
| 4 |
*/ |
| 5 |
/dts-v1/; |
| 6 |
|
| 7 |
#include "omap4-duovero.dtsi" |
| 8 |
|
| 9 |
#include <dt-bindings/input/input.h> |
| 10 |
|
| 11 |
/ { |
| 12 |
model = "OMAP4430 Gumstix Duovero on Parlor"; |
| 13 |
compatible = "gumstix,omap4-duovero-parlor", "gumstix,omap4-duovero", "ti,omap4430", "ti,omap4"; |
| 14 |
|
| 15 |
aliases { |
| 16 |
display0 = &hdmi0; |
| 17 |
}; |
| 18 |
|
| 19 |
leds { |
| 20 |
compatible = "gpio-leds"; |
| 21 |
led0 { |
| 22 |
label = "duovero:blue:led0"; |
| 23 |
gpios = <&gpio4 26 GPIO_ACTIVE_HIGH>; /* gpio_122 */ |
| 24 |
linux,default-trigger = "heartbeat"; |
| 25 |
}; |
| 26 |
}; |
| 27 |
|
| 28 |
gpio_keys { |
| 29 |
compatible = "gpio-keys"; |
| 30 |
#address-cells = <1>; |
| 31 |
#size-cells = <0>; |
| 32 |
button0 { |
| 33 |
label = "button0"; |
| 34 |
linux,code = <BTN_0>; |
| 35 |
gpios = <&gpio4 25 GPIO_ACTIVE_LOW>; /* gpio_121 */ |
| 36 |
/* Value above 7.95ms for no GPIO hardware debounce */ |
| 37 |
debounce-interval = <10>; |
| 38 |
wakeup-source; |
| 39 |
}; |
| 40 |
}; |
| 41 |
|
| 42 |
hdmi0: connector { |
| 43 |
compatible = "hdmi-connector"; |
| 44 |
label = "hdmi"; |
| 45 |
|
| 46 |
type = "d"; |
| 47 |
|
| 48 |
hpd-gpios = <&gpio2 31 GPIO_ACTIVE_HIGH>; /* gpio_63 */ |
| 49 |
|
| 50 |
port { |
| 51 |
hdmi_connector_in: endpoint { |
| 52 |
remote-endpoint = <&hdmi_out>; |
| 53 |
}; |
| 54 |
}; |
| 55 |
}; |
| 56 |
}; |
| 57 |
|
| 58 |
&omap4_pmx_core { |
| 59 |
pinctrl-0 = < |
| 60 |
&led_pins |
| 61 |
&button_pins |
| 62 |
&smsc_pins |
| 63 |
>; |
| 64 |
|
| 65 |
led_pins: led-pins { |
| 66 |
pinctrl-single,pins = < |
| 67 |
OMAP4_IOPAD(0x116, PIN_OUTPUT | MUX_MODE3) /* abe_dmic_din3.gpio_122 */ |
| 68 |
>; |
| 69 |
}; |
| 70 |
|
| 71 |
button_pins: button-pins { |
| 72 |
pinctrl-single,pins = < |
| 73 |
OMAP4_IOPAD(0x114, PIN_INPUT_PULLUP | MUX_MODE3) /* abe_dmic_din2.gpio_121 */ |
| 74 |
>; |
| 75 |
}; |
| 76 |
|
| 77 |
i2c2_pins: i2c2-pins { |
| 78 |
pinctrl-single,pins = < |
| 79 |
OMAP4_IOPAD(0x126, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c2_scl */ |
| 80 |
OMAP4_IOPAD(0x128, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c2_sda */ |
| 81 |
>; |
| 82 |
}; |
| 83 |
|
| 84 |
i2c3_pins: i2c3-pins { |
| 85 |
pinctrl-single,pins = < |
| 86 |
OMAP4_IOPAD(0x12a, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c3_scl */ |
| 87 |
OMAP4_IOPAD(0x12c, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c3_sda */ |
| 88 |
>; |
| 89 |
}; |
| 90 |
|
| 91 |
smsc_pins: smsc-pins { |
| 92 |
pinctrl-single,pins = < |
| 93 |
OMAP4_IOPAD(0x068, PIN_INPUT | MUX_MODE3) /* gpmc_a20.gpio_44: IRQ */ |
| 94 |
OMAP4_IOPAD(0x06a, PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_a21.gpio_45: nReset */ |
| 95 |
OMAP4_IOPAD(0x070, PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_a24.gpio_48: amdix enabled */ |
| 96 |
>; |
| 97 |
}; |
| 98 |
|
| 99 |
dss_hdmi_pins: dss-hdmi-pins { |
| 100 |
pinctrl-single,pins = < |
| 101 |
OMAP4_IOPAD(0x098, PIN_INPUT | MUX_MODE3) /* hdmi_hpd.gpio_63 */ |
| 102 |
OMAP4_IOPAD(0x09a, PIN_INPUT | MUX_MODE0) /* hdmi_cec.hdmi_cec */ |
| 103 |
OMAP4_IOPAD(0x09c, PIN_INPUT_PULLUP | MUX_MODE0) /* hdmi_ddc_scl.hdmi_ddc_scl */ |
| 104 |
OMAP4_IOPAD(0x09e, PIN_INPUT_PULLUP | MUX_MODE0) /* hdmi_ddc_sda.hdmi_ddc_sda */ |
| 105 |
>; |
| 106 |
}; |
| 107 |
}; |
| 108 |
|
| 109 |
&i2c2 { |
| 110 |
pinctrl-names = "default"; |
| 111 |
pinctrl-0 = <&i2c2_pins>; |
| 112 |
|
| 113 |
clock-frequency = <400000>; |
| 114 |
}; |
| 115 |
|
| 116 |
&i2c3 { |
| 117 |
pinctrl-names = "default"; |
| 118 |
pinctrl-0 = <&i2c3_pins>; |
| 119 |
|
| 120 |
clock-frequency = <100000>; |
| 121 |
|
| 122 |
/* optional 1K EEPROM with revision information */ |
| 123 |
eeprom@51 { |
| 124 |
compatible = "atmel,24c01"; |
| 125 |
reg = <0x51>; |
| 126 |
pagesize = <8>; |
| 127 |
}; |
| 128 |
}; |
| 129 |
|
| 130 |
&mmc3 { |
| 131 |
status = "disabled"; |
| 132 |
}; |
| 133 |
|
| 134 |
#include "omap-gpmc-smsc911x.dtsi" |
| 135 |
|
| 136 |
&gpmc { |
| 137 |
ranges = <5 0 0x2c000000 0x1000000>; /* CS5 */ |
| 138 |
|
| 139 |
ethernet@gpmc { |
| 140 |
reg = <5 0 0xff>; |
| 141 |
interrupt-parent = <&gpio2>; |
| 142 |
interrupts = <12 IRQ_TYPE_LEVEL_LOW>; /* gpio_44 */ |
| 143 |
|
| 144 |
phy-mode = "mii"; |
| 145 |
|
| 146 |
gpmc,cs-on-ns = <10>; |
| 147 |
gpmc,cs-rd-off-ns = <50>; |
| 148 |
gpmc,cs-wr-off-ns = <50>; |
| 149 |
gpmc,adv-on-ns = <0>; |
| 150 |
gpmc,adv-rd-off-ns = <10>; |
| 151 |
gpmc,adv-wr-off-ns = <10>; |
| 152 |
gpmc,oe-on-ns = <15>; |
| 153 |
gpmc,oe-off-ns = <50>; |
| 154 |
gpmc,we-on-ns = <15>; |
| 155 |
gpmc,we-off-ns = <50>; |
| 156 |
gpmc,rd-cycle-ns = <50>; |
| 157 |
gpmc,wr-cycle-ns = <50>; |
| 158 |
gpmc,access-ns = <50>; |
| 159 |
gpmc,page-burst-access-ns = <0>; |
| 160 |
gpmc,bus-turnaround-ns = <35>; |
| 161 |
gpmc,cycle2cycle-delay-ns = <35>; |
| 162 |
gpmc,wr-data-mux-bus-ns = <35>; |
| 163 |
gpmc,wr-access-ns = <50>; |
| 164 |
|
| 165 |
gpmc,mux-add-data = <2>; |
| 166 |
gpmc,sync-read; |
| 167 |
gpmc,sync-write; |
| 168 |
gpmc,clk-activation-ns = <5>; |
| 169 |
gpmc,sync-clk-ps = <20000>; |
| 170 |
}; |
| 171 |
}; |
| 172 |
|
| 173 |
&dss { |
| 174 |
status = "okay"; |
| 175 |
}; |
| 176 |
|
| 177 |
&hdmi { |
| 178 |
status = "okay"; |
| 179 |
vdda-supply = <&vdac>; |
| 180 |
|
| 181 |
pinctrl-names = "default"; |
| 182 |
pinctrl-0 = <&dss_hdmi_pins>; |
| 183 |
|
| 184 |
port { |
| 185 |
hdmi_out: endpoint { |
| 186 |
remote-endpoint = <&hdmi_connector_in>; |
| 187 |
}; |
| 188 |
}; |
| 189 |
}; |
| 190 |
|
| 191 |
&uart3 { |
| 192 |
interrupts-extended = <&wakeupgen GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH |
| 193 |
&omap4_pmx_core OMAP4_UART3_RX>; |
| 194 |
}; |