| 1 |
// SPDX-License-Identifier: GPL-2.0-only |
| 2 |
/* |
| 3 |
* Copyright (C) 2015 CompuLab, Ltd. - https://www.compulab.co.il/ |
| 4 |
*/ |
| 5 |
|
| 6 |
#include "am437x-cm-t43.dts" |
| 7 |
#include "compulab-sb-som.dtsi" |
| 8 |
|
| 9 |
/ { |
| 10 |
model = "CompuLab CM-T43 on SB-SOM-T43"; |
| 11 |
compatible = "compulab,am437x-sbc-t43", "compulab,am437x-cm-t43", "ti,am4372", "ti,am43"; |
| 12 |
|
| 13 |
aliases { |
| 14 |
display0 = &lcd0; |
| 15 |
}; |
| 16 |
}; |
| 17 |
|
| 18 |
&am43xx_pinmux { |
| 19 |
mmc1_pins: mmc1-pins { |
| 20 |
pinctrl-single,pins = < |
| 21 |
AM4372_IOPAD(0x900, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_clk.mmc0_clk */ |
| 22 |
AM4372_IOPAD(0x904, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_cmd.mmc0_cmd */ |
| 23 |
AM4372_IOPAD(0x8f0, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat0.mmc0_dat0 */ |
| 24 |
AM4372_IOPAD(0x8f4, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat1.mmc0_dat1 */ |
| 25 |
AM4372_IOPAD(0x8f8, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat2.mmc0_dat2 */ |
| 26 |
AM4372_IOPAD(0x8fc, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat3.mmc0_dat3 */ |
| 27 |
AM4372_IOPAD(0x960, PIN_INPUT | MUX_MODE7) /* spi0_cs1.gpio0_6 */ |
| 28 |
AM4372_IOPAD(0x964, PIN_INPUT | MUX_MODE7) /* ecap0_in_pwm0_out.gpio0_7 */ |
| 29 |
>; |
| 30 |
}; |
| 31 |
|
| 32 |
dss_pinctrl_default: dss-pinctrl-default-pins { |
| 33 |
pinctrl-single,pins = < |
| 34 |
AM4372_IOPAD(0x9b0, PIN_OUTPUT_PULLUP | MUX_MODE2) /* cam0 hd -> DSS DATA 23 */ |
| 35 |
AM4372_IOPAD(0x9b4, PIN_OUTPUT_PULLUP | MUX_MODE2) |
| 36 |
AM4372_IOPAD(0x9b8, PIN_OUTPUT_PULLUP | MUX_MODE2) |
| 37 |
AM4372_IOPAD(0x9bc, PIN_OUTPUT_PULLUP | MUX_MODE2) |
| 38 |
AM4372_IOPAD(0x9c0, PIN_OUTPUT_PULLUP | MUX_MODE2) |
| 39 |
AM4372_IOPAD(0x9c4, PIN_OUTPUT_PULLUP | MUX_MODE2) |
| 40 |
AM4372_IOPAD(0x9c8, PIN_OUTPUT_PULLUP | MUX_MODE2) |
| 41 |
AM4372_IOPAD(0x9cc, PIN_OUTPUT_PULLUP | MUX_MODE2) /* cam1 data 9 -> DSS DATA 16 */ |
| 42 |
|
| 43 |
AM4372_IOPAD(0x8a0, PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS DATA 0 */ |
| 44 |
AM4372_IOPAD(0x8a4, PIN_OUTPUT_PULLUP | MUX_MODE0) |
| 45 |
AM4372_IOPAD(0x8a8, PIN_OUTPUT_PULLUP | MUX_MODE0) |
| 46 |
AM4372_IOPAD(0x8ac, PIN_OUTPUT_PULLUP | MUX_MODE0) |
| 47 |
AM4372_IOPAD(0x8b0, PIN_OUTPUT_PULLUP | MUX_MODE0) |
| 48 |
AM4372_IOPAD(0x8b4, PIN_OUTPUT_PULLUP | MUX_MODE0) |
| 49 |
AM4372_IOPAD(0x8b8, PIN_OUTPUT_PULLUP | MUX_MODE0) |
| 50 |
AM4372_IOPAD(0x8bc, PIN_OUTPUT_PULLUP | MUX_MODE0) |
| 51 |
AM4372_IOPAD(0x8c0, PIN_OUTPUT_PULLUP | MUX_MODE0) |
| 52 |
AM4372_IOPAD(0x8c4, PIN_OUTPUT_PULLUP | MUX_MODE0) |
| 53 |
AM4372_IOPAD(0x8c8, PIN_OUTPUT_PULLUP | MUX_MODE0) |
| 54 |
AM4372_IOPAD(0x8cc, PIN_OUTPUT_PULLUP | MUX_MODE0) |
| 55 |
AM4372_IOPAD(0x8d0, PIN_OUTPUT_PULLUP | MUX_MODE0) |
| 56 |
AM4372_IOPAD(0x8d4, PIN_OUTPUT_PULLUP | MUX_MODE0) |
| 57 |
AM4372_IOPAD(0x8d8, PIN_OUTPUT_PULLUP | MUX_MODE0) |
| 58 |
AM4372_IOPAD(0x8dc, PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS DATA 15 */ |
| 59 |
AM4372_IOPAD(0x8e0, PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS VSYNC */ |
| 60 |
AM4372_IOPAD(0x8e4, PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS HSYNC */ |
| 61 |
AM4372_IOPAD(0x8e8, PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS PCLK */ |
| 62 |
AM4372_IOPAD(0x8ec, PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS AC BIAS EN */ |
| 63 |
AM4372_IOPAD(0xa20, PIN_OUTPUT_PULLUP | MUX_MODE7) |
| 64 |
>; |
| 65 |
}; |
| 66 |
|
| 67 |
uart0_pins_default: uart0-default-pins { |
| 68 |
pinctrl-single,pins = < |
| 69 |
AM4372_IOPAD(0x968, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE0) |
| 70 |
AM4372_IOPAD(0x96C, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE0) |
| 71 |
AM4372_IOPAD(0x970, PIN_INPUT_PULLUP | SLEWCTRL_FAST | DS0_PULL_UP_DOWN_EN | MUX_MODE0) /* uart0_rxd.uart0_rxd */ |
| 72 |
AM4372_IOPAD(0x974, PIN_INPUT | PULL_DISABLE | SLEWCTRL_FAST | DS0_PULL_UP_DOWN_EN | MUX_MODE0) /* uart0_txd.uart0_txd */ |
| 73 |
>; |
| 74 |
}; |
| 75 |
|
| 76 |
i2c1_pins: i2c1-pins { |
| 77 |
pinctrl-single,pins = < |
| 78 |
AM4372_IOPAD(0xa6c, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE1) /* spi2_cs0.i2c1_sda */ |
| 79 |
AM4372_IOPAD(0xa60, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE1) /* spi2_sclk.i2c1_scl */ |
| 80 |
>; |
| 81 |
}; |
| 82 |
|
| 83 |
i2c2_pins: i2c2-pins { |
| 84 |
pinctrl-single,pins = < |
| 85 |
AM4372_IOPAD(0x978, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE3) /* uart1_ctsn.i2c2_sda */ |
| 86 |
AM4372_IOPAD(0x97c, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE3) /* uart1_rtsn.i2c2_scl */ |
| 87 |
>; |
| 88 |
}; |
| 89 |
|
| 90 |
usb2_phy1_default: usb2-phy1-default-pins { |
| 91 |
pinctrl-single,pins = < |
| 92 |
AM4372_IOPAD(0xac0, DS0_PULL_UP_DOWN_EN | PIN_INPUT_PULLDOWN | MUX_MODE0) |
| 93 |
>; |
| 94 |
}; |
| 95 |
|
| 96 |
usb2_phy2_default: usb2-phy2-default-pins { |
| 97 |
pinctrl-single,pins = < |
| 98 |
AM4372_IOPAD(0xac4, DS0_PULL_UP_DOWN_EN | PIN_INPUT_PULLDOWN | MUX_MODE0) |
| 99 |
>; |
| 100 |
}; |
| 101 |
}; |
| 102 |
|
| 103 |
&i2c1 { |
| 104 |
status = "okay"; |
| 105 |
pinctrl-names = "default"; |
| 106 |
pinctrl-0 = <&i2c1_pins>; |
| 107 |
|
| 108 |
pca9555: pca9555@20 { |
| 109 |
compatible = "nxp,pca9555"; |
| 110 |
reg = <0x20>; |
| 111 |
gpio-controller; |
| 112 |
#gpio-cells = <2>; |
| 113 |
}; |
| 114 |
|
| 115 |
eeprom_base: eeprom@50 { |
| 116 |
compatible = "atmel,24c02"; |
| 117 |
reg = <0x50>; |
| 118 |
pagesize = <16>; |
| 119 |
}; |
| 120 |
}; |
| 121 |
|
| 122 |
&i2c2 { |
| 123 |
status = "okay"; |
| 124 |
pinctrl-names = "default"; |
| 125 |
pinctrl-0 = <&i2c2_pins>; |
| 126 |
}; |
| 127 |
|
| 128 |
&mmc1 { |
| 129 |
status = "okay"; |
| 130 |
bus-width = <4>; |
| 131 |
pinctrl-names = "default"; |
| 132 |
pinctrl-0 = <&mmc1_pins>; |
| 133 |
vmmc-supply = <&vsb_3v3>; |
| 134 |
cd-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>; |
| 135 |
wp-gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>; |
| 136 |
}; |
| 137 |
|
| 138 |
&dss { |
| 139 |
status = "okay"; |
| 140 |
|
| 141 |
pinctrl-names = "default"; |
| 142 |
pinctrl-0 = <&dss_pinctrl_default>; |
| 143 |
|
| 144 |
port { |
| 145 |
dpi_lcd_out: endpoint { |
| 146 |
remote-endpoint = <&lcd_in>; |
| 147 |
data-lines = <24>; |
| 148 |
}; |
| 149 |
}; |
| 150 |
}; |
| 151 |
|
| 152 |
&uart0 { |
| 153 |
pinctrl-names = "default"; |
| 154 |
pinctrl-0 = <&uart0_pins_default>; |
| 155 |
}; |
| 156 |
|
| 157 |
&dwc3_1 { |
| 158 |
pinctrl-names = "default"; |
| 159 |
pinctrl-0 = <&usb2_phy1_default>; |
| 160 |
}; |
| 161 |
|
| 162 |
&dwc3_2 { |
| 163 |
pinctrl-names = "default"; |
| 164 |
pinctrl-0 = <&usb2_phy2_default>; |
| 165 |
}; |
| 166 |
|
| 167 |
&lcd0 { |
| 168 |
enable-gpios = <&pca9555 14 GPIO_ACTIVE_HIGH |
| 169 |
&gpio4 28 GPIO_ACTIVE_HIGH>; |
| 170 |
|
| 171 |
port { |
| 172 |
lcd_in: endpoint { |
| 173 |
remote-endpoint = <&dpi_lcd_out>; |
| 174 |
data-lines = <24>; |
| 175 |
}; |
| 176 |
}; |
| 177 |
}; |