| 1 |
// SPDX-License-Identifier: GPL-2.0-only |
| 2 |
/* |
| 3 |
* Copyright (C) 2021 Sancloud Ltd |
| 4 |
* Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/ |
| 5 |
*/ |
| 6 |
/dts-v1/; |
| 7 |
|
| 8 |
#include "am33xx.dtsi" |
| 9 |
#include "am335x-bone-common.dtsi" |
| 10 |
#include "am335x-boneblack-common.dtsi" |
| 11 |
#include "am335x-sancloud-bbe-common.dtsi" |
| 12 |
#include <dt-bindings/interrupt-controller/irq.h> |
| 13 |
|
| 14 |
/ { |
| 15 |
model = "SanCloud BeagleBone Enhanced Extended WiFi"; |
| 16 |
compatible = "sancloud,am335x-boneenhanced", |
| 17 |
"ti,am335x-bone-black", |
| 18 |
"ti,am335x-bone", |
| 19 |
"ti,am33xx"; |
| 20 |
|
| 21 |
wlan_en_reg: fixedregulator@2 { |
| 22 |
compatible = "regulator-fixed"; |
| 23 |
regulator-name = "wlan-en-regulator"; |
| 24 |
regulator-min-microvolt = <3300000>; |
| 25 |
regulator-max-microvolt = <3300000>; |
| 26 |
startup-delay-us = <100000>; |
| 27 |
}; |
| 28 |
}; |
| 29 |
|
| 30 |
&am33xx_pinmux { |
| 31 |
mmc3_pins: mmc3-pins { |
| 32 |
pinctrl-single,pins = < |
| 33 |
/* gpmc_a9.gpio1_25: RADIO_EN */ |
| 34 |
AM33XX_PADCONF(AM335X_PIN_GPMC_A9, PIN_OUTPUT_PULLUP, MUX_MODE7) |
| 35 |
|
| 36 |
/* gpmc_ad12.mmc2_dat0 */ |
| 37 |
AM33XX_PADCONF(AM335X_PIN_GPMC_AD12, PIN_INPUT_PULLUP, MUX_MODE3) |
| 38 |
|
| 39 |
/* gpmc_ad13.mmc2_dat1 */ |
| 40 |
AM33XX_PADCONF(AM335X_PIN_GPMC_AD13, PIN_INPUT_PULLUP, MUX_MODE3) |
| 41 |
|
| 42 |
/* gpmc_ad14.mmc2_dat2 */ |
| 43 |
AM33XX_PADCONF(AM335X_PIN_GPMC_AD14, PIN_INPUT_PULLUP, MUX_MODE3) |
| 44 |
|
| 45 |
/* gpmc_ad15.mmc2_dat3 */ |
| 46 |
AM33XX_PADCONF(AM335X_PIN_GPMC_AD15, PIN_INPUT_PULLUP, MUX_MODE3) |
| 47 |
|
| 48 |
/* gpmc_csn3.mmc2_cmd */ |
| 49 |
AM33XX_PADCONF(AM335X_PIN_GPMC_CSN3, PIN_INPUT_PULLUP, MUX_MODE3) |
| 50 |
|
| 51 |
/* gpmc_clk.mmc2_clk */ |
| 52 |
AM33XX_PADCONF(AM335X_PIN_GPMC_CLK, PIN_INPUT_PULLUP, MUX_MODE3) |
| 53 |
>; |
| 54 |
}; |
| 55 |
|
| 56 |
bluetooth_pins: bluetooth-pins { |
| 57 |
pinctrl-single,pins = < |
| 58 |
/* event_intr0.gpio0_19 */ |
| 59 |
AM33XX_PADCONF(AM335X_PIN_XDMA_EVENT_INTR0, PIN_INPUT_PULLUP, MUX_MODE7) |
| 60 |
>; |
| 61 |
}; |
| 62 |
|
| 63 |
uart1_pins: uart1-pins { |
| 64 |
pinctrl-single,pins = < |
| 65 |
/* uart1_rxd */ |
| 66 |
AM33XX_PADCONF(AM335X_PIN_UART1_RXD, PIN_INPUT, MUX_MODE0) |
| 67 |
|
| 68 |
/* uart1_txd */ |
| 69 |
AM33XX_PADCONF(AM335X_PIN_UART1_TXD, PIN_INPUT, MUX_MODE0) |
| 70 |
|
| 71 |
/* uart1_ctsn */ |
| 72 |
AM33XX_PADCONF(AM335X_PIN_UART1_CTSN, PIN_INPUT_PULLDOWN, MUX_MODE0) |
| 73 |
|
| 74 |
/* uart1_rtsn */ |
| 75 |
AM33XX_PADCONF(AM335X_PIN_UART1_RTSN, PIN_OUTPUT_PULLDOWN, MUX_MODE0) |
| 76 |
>; |
| 77 |
}; |
| 78 |
}; |
| 79 |
|
| 80 |
&i2c2 { |
| 81 |
status = "disabled"; |
| 82 |
}; |
| 83 |
|
| 84 |
&mmc3 { |
| 85 |
status = "okay"; |
| 86 |
vmmc-supply = <&wlan_en_reg>; |
| 87 |
bus-width = <4>; |
| 88 |
non-removable; |
| 89 |
cap-power-off-card; |
| 90 |
keep-power-in-suspend; |
| 91 |
pinctrl-names = "default"; |
| 92 |
pinctrl-0 = <&mmc3_pins>; |
| 93 |
dmas = <&edma_xbar 12 0 1 |
| 94 |
&edma_xbar 13 0 2>; |
| 95 |
dma-names = "tx", "rx"; |
| 96 |
clock-frequency = <50000000>; |
| 97 |
max-frequency = <50000000>; |
| 98 |
}; |
| 99 |
|
| 100 |
&uart1 { |
| 101 |
status = "okay"; |
| 102 |
|
| 103 |
bluetooth { |
| 104 |
pinctrl-names = "default"; |
| 105 |
pinctrl-0 = <&uart1_pins &bluetooth_pins>; |
| 106 |
compatible = "qcom,qca6174-bt"; |
| 107 |
enable-gpios = <&gpio1 25 GPIO_ACTIVE_HIGH>; |
| 108 |
clocks = <&l4ls_clkctrl AM3_L4LS_UART2_CLKCTRL 0>; |
| 109 |
interrupt-parent = <&gpio0>; |
| 110 |
interrupts = <19 IRQ_TYPE_EDGE_RISING>; |
| 111 |
}; |
| 112 |
}; |