| 1 |
// SPDX-License-Identifier: GPL-2.0-only |
| 2 |
/* |
| 3 |
* Copyright (C) 2023 Andreas Kemnade |
| 4 |
*/ |
| 5 |
/dts-v1/; |
| 6 |
|
| 7 |
#include <dt-bindings/leds/common.h> |
| 8 |
#include <dt-bindings/input/input.h> |
| 9 |
#include "omap4460.dtsi" |
| 10 |
|
| 11 |
/ { |
| 12 |
model = "Epson Moverio BT-200"; |
| 13 |
compatible = "epson,embt2ws", "ti,omap4460", "ti,omap4"; |
| 14 |
|
| 15 |
memory@80000000 { |
| 16 |
device_type = "memory"; |
| 17 |
reg = <0x80000000 0x40000000>; /* 1024M */ |
| 18 |
}; |
| 19 |
|
| 20 |
battery: battery { |
| 21 |
compatible = "simple-battery"; |
| 22 |
device-chemistry = "lithium-ion"; |
| 23 |
charge-full-design-microamp-hours = <2720000>; |
| 24 |
voltage-max-design-microvolt = <4200000>; |
| 25 |
voltage-min-design-microvolt = <3300000>; |
| 26 |
|
| 27 |
constant-charge-voltage-max-microvolt = <4200000>; |
| 28 |
/* |
| 29 |
* vendor kernel says max charge 1400000, input limit 900000 |
| 30 |
* and charges only with dcp chargers. So it is unclear what |
| 31 |
* is really allowed. Play safe for now and restrict things |
| 32 |
* here. Maybe 900000 is just the limit of the vendor charger? |
| 33 |
*/ |
| 34 |
constant-charge-current-max-microamp = <900000>; |
| 35 |
charge-term-current-microamp = <200000>; |
| 36 |
}; |
| 37 |
|
| 38 |
backlight-left { |
| 39 |
compatible = "pwm-backlight"; |
| 40 |
pwms = <&twl_pwm 1 7812500>; |
| 41 |
power-supply = <&lb_v50>; |
| 42 |
}; |
| 43 |
|
| 44 |
backlight-right { |
| 45 |
compatible = "pwm-backlight"; |
| 46 |
pwms = <&twl_pwm 0 7812500>; |
| 47 |
power-supply = <&lb_v50>; |
| 48 |
}; |
| 49 |
|
| 50 |
chosen { |
| 51 |
stdout-path = &uart3; |
| 52 |
}; |
| 53 |
|
| 54 |
gpio-keys { |
| 55 |
compatible = "gpio-keys"; |
| 56 |
pinctrl-names = "default"; |
| 57 |
pinctrl-0 = <&gpio_keys_pins>; |
| 58 |
|
| 59 |
key-lock { |
| 60 |
label = "Lock"; |
| 61 |
gpios = <&gpio2 3 GPIO_ACTIVE_LOW>; |
| 62 |
linux,code = <SW_ROTATE_LOCK>; /* SW_TOUCHPAD_LOCK */ |
| 63 |
linux,input-type = <EV_SW>; |
| 64 |
}; |
| 65 |
}; |
| 66 |
|
| 67 |
cb_v18: regulator-cb-v18 { |
| 68 |
pinctrl-names = "default"; |
| 69 |
pinctrl-0 = <&cb_v18_pins>; |
| 70 |
compatible = "regulator-fixed"; |
| 71 |
regulator-name = "cb_v18"; |
| 72 |
regulator-min-microvolt = <1800000>; |
| 73 |
regulator-max-microvolt = <1800000>; |
| 74 |
regulator-always-on; |
| 75 |
gpio = <&gpio1 28 GPIO_ACTIVE_HIGH>; |
| 76 |
enable-active-high; |
| 77 |
}; |
| 78 |
|
| 79 |
cb_v33: regulator-cb-v33 { |
| 80 |
pinctrl-names = "default"; |
| 81 |
pinctrl-0 = <&cb_v33_pins>; |
| 82 |
compatible = "regulator-fixed"; |
| 83 |
regulator-name = "cb_v33"; |
| 84 |
regulator-min-microvolt = <3300000>; |
| 85 |
regulator-max-microvolt = <3300000>; |
| 86 |
regulator-always-on; |
| 87 |
gpio = <&gpio6 30 GPIO_ACTIVE_HIGH>; |
| 88 |
enable-active-high; |
| 89 |
}; |
| 90 |
|
| 91 |
regulator-cb-v50 { |
| 92 |
pinctrl-names = "default"; |
| 93 |
pinctrl-0 = <&cb_v50_pins>; |
| 94 |
compatible = "regulator-fixed"; |
| 95 |
regulator-name = "cb_v50"; |
| 96 |
regulator-min-microvolt = <5000000>; |
| 97 |
regulator-max-microvolt = <5000000>; |
| 98 |
regulator-always-on; |
| 99 |
gpio = <&gpio6 31 GPIO_ACTIVE_HIGH>; |
| 100 |
enable-active-high; |
| 101 |
}; |
| 102 |
|
| 103 |
lb_v50: regulator-lb-v50 { |
| 104 |
/* required for many things at the head (probably indirectly) */ |
| 105 |
pinctrl-names = "default"; |
| 106 |
pinctrl-0 = <&lb_v50_pins>; |
| 107 |
compatible = "regulator-fixed"; |
| 108 |
regulator-name = "lb_v50"; |
| 109 |
regulator-min-microvolt = <5000000>; |
| 110 |
regulator-max-microvolt = <5000000>; |
| 111 |
regulator-always-on; |
| 112 |
gpio = <&gpio1 27 GPIO_ACTIVE_HIGH>; |
| 113 |
enable-active-high; |
| 114 |
}; |
| 115 |
|
| 116 |
wl12xx_pwrseq: wl12xx-pwrseq { |
| 117 |
compatible = "mmc-pwrseq-simple"; |
| 118 |
clocks = <&twl 1>; |
| 119 |
clock-names = "ext_clock"; |
| 120 |
}; |
| 121 |
|
| 122 |
/* regulator for wl12xx on sdio2 */ |
| 123 |
wl12xx_vmmc: wl12xx-vmmc { |
| 124 |
pinctrl-names = "default"; |
| 125 |
pinctrl-0 = <&wl12xx_gpio>; |
| 126 |
compatible = "regulator-fixed"; |
| 127 |
regulator-name = "vwl1271"; |
| 128 |
regulator-min-microvolt = <1800000>; |
| 129 |
regulator-max-microvolt = <1800000>; |
| 130 |
gpio = <&gpio1 24 GPIO_ACTIVE_HIGH>; |
| 131 |
startup-delay-us = <70000>; |
| 132 |
enable-active-high; |
| 133 |
}; |
| 134 |
}; |
| 135 |
|
| 136 |
&gpio1 { |
| 137 |
pinctrl-names = "default"; |
| 138 |
pinctrl-0 = <&gpio1_hog_pins &gpio1wk_hog_pins>; |
| 139 |
|
| 140 |
lb-reset-hog { |
| 141 |
gpio-hog; |
| 142 |
gpios = <9 GPIO_ACTIVE_HIGH>; |
| 143 |
output-low; |
| 144 |
line-name = "lb_reset"; |
| 145 |
}; |
| 146 |
|
| 147 |
power-en-hog { |
| 148 |
gpio-hog; |
| 149 |
gpios = <10 GPIO_ACTIVE_HIGH>; |
| 150 |
output-high; |
| 151 |
line-name = "power_en"; |
| 152 |
}; |
| 153 |
|
| 154 |
/* |
| 155 |
* Name taken from vendor kernel but no evidence of actual usage found |
| 156 |
* nor what it really controls. |
| 157 |
*/ |
| 158 |
panel-power-en-hog { |
| 159 |
gpio-hog; |
| 160 |
gpios = <14 GPIO_ACTIVE_HIGH>; |
| 161 |
output-low; |
| 162 |
line-name = "panel_power_en"; |
| 163 |
}; |
| 164 |
|
| 165 |
/* |
| 166 |
* These two are exported to sysfs in vendor kernel, usage unknown, |
| 167 |
* backlight state seems unrelated to these. |
| 168 |
*/ |
| 169 |
blc-r-hog { |
| 170 |
gpio-hog; |
| 171 |
gpios = <17 GPIO_ACTIVE_HIGH>; |
| 172 |
output-low; |
| 173 |
line-name = "blc_r"; |
| 174 |
}; |
| 175 |
|
| 176 |
blc-l-hog { |
| 177 |
gpio-hog; |
| 178 |
gpios = <16 GPIO_ACTIVE_HIGH>; |
| 179 |
output-low; |
| 180 |
line-name = "blc_l"; |
| 181 |
}; |
| 182 |
|
| 183 |
high-hog { |
| 184 |
gpio-hog; |
| 185 |
gpios = <15 GPIO_ACTIVE_HIGH /* maybe dsi to dpi chip reset? */ |
| 186 |
21 GPIO_ACTIVE_HIGH |
| 187 |
26 GPIO_ACTIVE_HIGH>; |
| 188 |
output-high; |
| 189 |
line-name = "unknown-high"; |
| 190 |
}; |
| 191 |
|
| 192 |
low-hog { |
| 193 |
gpio-hog; |
| 194 |
gpios = <18 GPIO_ACTIVE_HIGH |
| 195 |
19 GPIO_ACTIVE_HIGH |
| 196 |
20 GPIO_ACTIVE_HIGH |
| 197 |
22 GPIO_ACTIVE_HIGH>; |
| 198 |
output-low; |
| 199 |
line-name = "unknown-low"; |
| 200 |
}; |
| 201 |
}; |
| 202 |
|
| 203 |
&i2c1 { |
| 204 |
pinctrl-names = "default"; |
| 205 |
pinctrl-0 = <&i2c1_pins>; |
| 206 |
|
| 207 |
clock-frequency = <400000>; |
| 208 |
|
| 209 |
twl: pmic@48 { |
| 210 |
compatible = "ti,twl6032"; |
| 211 |
reg = <0x48>; |
| 212 |
#clock-cells = <1>; |
| 213 |
/* IRQ# = 7 */ |
| 214 |
interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; /* IRQ_SYS_1N cascaded to gic */ |
| 215 |
interrupt-controller; |
| 216 |
#interrupt-cells = <1>; |
| 217 |
system-power-controller; |
| 218 |
|
| 219 |
charger { |
| 220 |
compatible = "ti,twl6032-charger", "ti,twl6030-charger"; |
| 221 |
interrupts = <2>, <5>; |
| 222 |
io-channels = <&gpadc 10>; |
| 223 |
io-channel-names = "vusb"; |
| 224 |
monitored-battery = <&battery>; |
| 225 |
}; |
| 226 |
|
| 227 |
rtc { |
| 228 |
compatible = "ti,twl4030-rtc"; |
| 229 |
interrupts = <11>; |
| 230 |
}; |
| 231 |
|
| 232 |
pwrbutton { |
| 233 |
compatible = "ti,twl6030-pwrbutton"; |
| 234 |
interrupts = <0>; |
| 235 |
}; |
| 236 |
|
| 237 |
ldo2: regulator-ldo2 { |
| 238 |
compatible = "ti,twl6032-ldo2"; |
| 239 |
regulator-min-microvolt = <1000000>; |
| 240 |
regulator-max-microvolt = <3000000>; |
| 241 |
}; |
| 242 |
|
| 243 |
ldo4: regulator-ldo4 { |
| 244 |
compatible = "ti,twl6032-ldo4"; |
| 245 |
regulator-min-microvolt = <1200000>; |
| 246 |
regulator-max-microvolt = <2800000>; |
| 247 |
}; |
| 248 |
|
| 249 |
ldo3: regulator-ldo3 { |
| 250 |
compatible = "ti,twl6032-ldo3"; |
| 251 |
regulator-min-microvolt = <1000000>; |
| 252 |
regulator-max-microvolt = <3000000>; |
| 253 |
}; |
| 254 |
|
| 255 |
ldo5: regulator-ldo5 { |
| 256 |
compatible = "ti,twl6032-ldo5"; |
| 257 |
regulator-min-microvolt = <1200000>; |
| 258 |
regulator-max-microvolt = <3000000>; |
| 259 |
ti,retain-on-reset; |
| 260 |
}; |
| 261 |
|
| 262 |
ldo1: regulator-ldo1 { |
| 263 |
compatible = "ti,twl6032-ldo1"; |
| 264 |
regulator-min-microvolt = <1800000>; |
| 265 |
regulator-max-microvolt = <2500000>; |
| 266 |
}; |
| 267 |
|
| 268 |
ldo7: regulator-ldo7 { |
| 269 |
compatible = "ti,twl6032-ldo7"; |
| 270 |
regulator-min-microvolt = <1200000>; |
| 271 |
regulator-max-microvolt = <2900000>; |
| 272 |
}; |
| 273 |
|
| 274 |
ldoln: regulator-ldoln { |
| 275 |
compatible = "ti,twl6032-ldoln"; |
| 276 |
regulator-always-on; |
| 277 |
}; |
| 278 |
|
| 279 |
ldo6: regulator-ldo6 { |
| 280 |
compatible = "ti,twl6032-ldo6"; |
| 281 |
regulator-always-on; |
| 282 |
}; |
| 283 |
|
| 284 |
ldousb: regulator-ldousb { |
| 285 |
compatible = "ti,twl6032-ldousb"; |
| 286 |
regulator-always-on; |
| 287 |
}; |
| 288 |
|
| 289 |
vio: regulator-vio { |
| 290 |
compatible = "ti,twl6032-vio"; |
| 291 |
regulator-always-on; |
| 292 |
}; |
| 293 |
|
| 294 |
twl_usb_comparator: usb-comparator { |
| 295 |
compatible = "ti,twl6030-usb"; |
| 296 |
interrupts = <4>, <10>; |
| 297 |
}; |
| 298 |
|
| 299 |
twl_pwm: pwm { |
| 300 |
/* provides two PWMs (id 0, 1 for PWM1 and PWM2) */ |
| 301 |
compatible = "ti,twl6030-pwm"; |
| 302 |
#pwm-cells = <2>; |
| 303 |
}; |
| 304 |
|
| 305 |
twl_pwmled: pwmled { |
| 306 |
/* provides one PWM (id 0 for Charging indicator LED) */ |
| 307 |
compatible = "ti,twl6030-pwmled"; |
| 308 |
#pwm-cells = <2>; |
| 309 |
}; |
| 310 |
|
| 311 |
gpadc: gpadc { |
| 312 |
compatible = "ti,twl6032-gpadc"; |
| 313 |
interrupts = <3>; |
| 314 |
#io-channel-cells = <1>; |
| 315 |
}; |
| 316 |
|
| 317 |
}; |
| 318 |
}; |
| 319 |
|
| 320 |
#include "twl6030_omap4.dtsi" |
| 321 |
|
| 322 |
&twl_usb_comparator { |
| 323 |
usb-supply = <&ldousb>; |
| 324 |
}; |
| 325 |
|
| 326 |
|
| 327 |
&i2c2 { |
| 328 |
pinctrl-names = "default"; |
| 329 |
pinctrl-0 = <&i2c2_pins>; |
| 330 |
|
| 331 |
clock-frequency = <200000>; |
| 332 |
|
| 333 |
/* is sometimes not available, research needed */ |
| 334 |
gpio_head: gpio@20 { |
| 335 |
compatible = "ti,tca6408"; |
| 336 |
reg = <0x20>; |
| 337 |
gpio-controller; |
| 338 |
#gpio-cells = <2>; |
| 339 |
}; |
| 340 |
|
| 341 |
/* |
| 342 |
* camera chip at 0x3c, available if <&gpio_head 1> high |
| 343 |
* and <&gpio_head 5> low |
| 344 |
*/ |
| 345 |
|
| 346 |
/* at head/glasses */ |
| 347 |
mpu9150h: imu@68 { |
| 348 |
compatible = "invensense,mpu9150"; |
| 349 |
reg = <0x68>; |
| 350 |
|
| 351 |
pinctrl-names = "default"; |
| 352 |
pinctrl-0 = <&mpu9150h_pins>; |
| 353 |
interrupt-parent = <&gpio2>; |
| 354 |
interrupt = <19 IRQ_TYPE_LEVEL_HIGH>; |
| 355 |
}; |
| 356 |
}; |
| 357 |
|
| 358 |
&i2c3 { |
| 359 |
pinctrl-names = "default"; |
| 360 |
pinctrl-0 = <&i2c3_pins>; |
| 361 |
|
| 362 |
clock-frequency = <100000>; |
| 363 |
|
| 364 |
led-controller@66 { |
| 365 |
compatible = "rohm,bd2606mvv"; |
| 366 |
reg = <0x66>; |
| 367 |
|
| 368 |
#address-cells = <1>; |
| 369 |
#size-cells = <0>; |
| 370 |
|
| 371 |
led@0 { |
| 372 |
reg = <0>; |
| 373 |
color = <LED_COLOR_ID_GREEN>; |
| 374 |
function = LED_FUNCTION_STATUS; |
| 375 |
}; |
| 376 |
|
| 377 |
led@2 { |
| 378 |
reg = <2>; |
| 379 |
color = <LED_COLOR_ID_BLUE>; |
| 380 |
function = LED_FUNCTION_STATUS; |
| 381 |
}; |
| 382 |
|
| 383 |
led@4 { |
| 384 |
reg = <4>; |
| 385 |
color = <LED_COLOR_ID_RED>; |
| 386 |
function = LED_FUNCTION_STATUS; |
| 387 |
}; |
| 388 |
}; |
| 389 |
}; |
| 390 |
|
| 391 |
&i2c4 { |
| 392 |
pinctrl-names = "default"; |
| 393 |
pinctrl-0 = <&i2c4_pins>; |
| 394 |
|
| 395 |
clock-frequency = <360000>; |
| 396 |
|
| 397 |
/* TODO: KXTI9 at 0xf */ |
| 398 |
|
| 399 |
tlv320aic3x: codec@18 { |
| 400 |
compatible = "ti,tlv320aic3x"; |
| 401 |
reg = <0x18>; |
| 402 |
pinctrl-names = "default"; |
| 403 |
pinctrl-0 = <&tlv320aic3x_pins>; |
| 404 |
#sound-dai-cells = <0>; |
| 405 |
|
| 406 |
reset-gpios = <&gpio2 23 GPIO_ACTIVE_LOW>; |
| 407 |
}; |
| 408 |
|
| 409 |
mpu9150: imu@68 { |
| 410 |
compatible = "invensense,mpu9150"; |
| 411 |
reg = <0x68>; |
| 412 |
|
| 413 |
pinctrl-names = "default"; |
| 414 |
pinctrl-0 = <&mpu9150_pins>; |
| 415 |
interrupt-parent = <&gpio2>; |
| 416 |
interrupt = <7 IRQ_TYPE_LEVEL_HIGH>; |
| 417 |
vddio-supply = <&cb_v18>; |
| 418 |
vdd-supply = <&cb_v33>; |
| 419 |
invensense,level-shifter; |
| 420 |
}; |
| 421 |
}; |
| 422 |
|
| 423 |
&keypad { |
| 424 |
pinctrl-names = "default"; |
| 425 |
pinctrl-0 = <&keypad_pins>; |
| 426 |
keypad,num-rows = <2>; |
| 427 |
keypad,num-columns = <3>; |
| 428 |
linux,keymap = <MATRIX_KEY(0, 0, KEY_MENU) |
| 429 |
MATRIX_KEY(0, 1, KEY_HOME) |
| 430 |
MATRIX_KEY(0, 2, KEY_BACK) |
| 431 |
MATRIX_KEY(1, 0, KEY_ESC) |
| 432 |
MATRIX_KEY(1, 1, KEY_VOLUMEDOWN) |
| 433 |
MATRIX_KEY(1, 2, KEY_VOLUMEUP)>; |
| 434 |
linux,input-no-autorepeat; |
| 435 |
}; |
| 436 |
|
| 437 |
&mcbsp2 { |
| 438 |
#sound-dai-cells = <0>; |
| 439 |
pinctrl-names = "default"; |
| 440 |
pinctrl-0 = <&mcbsp2_pins>; |
| 441 |
status = "okay"; |
| 442 |
}; |
| 443 |
|
| 444 |
|
| 445 |
&mmc1 { |
| 446 |
/* sdcard */ |
| 447 |
vmmc-supply = <&ldo5>; |
| 448 |
broken-cd; |
| 449 |
bus-width = <4>; |
| 450 |
}; |
| 451 |
|
| 452 |
&mmc2 { |
| 453 |
/* emmc */ |
| 454 |
vmmc-supply = <&ldo2>; |
| 455 |
bus-width = <8>; |
| 456 |
}; |
| 457 |
|
| 458 |
&mmc3 { |
| 459 |
pinctrl-names = "default"; |
| 460 |
pinctrl-0 = <&wl12xx_pins>; |
| 461 |
vmmc-supply = <&wl12xx_vmmc>; |
| 462 |
mmc-pwrseq = <&wl12xx_pwrseq>; |
| 463 |
interrupts-extended = <&wakeupgen GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH |
| 464 |
&omap4_pmx_core 0x12e>; |
| 465 |
non-removable; |
| 466 |
bus-width = <4>; |
| 467 |
cap-power-off-card; |
| 468 |
|
| 469 |
#address-cells = <1>; |
| 470 |
#size-cells = <0>; |
| 471 |
wlcore: wlcore@2 { |
| 472 |
compatible = "ti,wl1283"; |
| 473 |
reg = <2>; |
| 474 |
interrupts-extended = <&gpio1 23 IRQ_TYPE_LEVEL_HIGH>; |
| 475 |
interrupt-names = "irq"; |
| 476 |
ref-clock-frequency = <26000000>; |
| 477 |
tcxo-clock-frequency = <26000000>; |
| 478 |
}; |
| 479 |
}; |
| 480 |
|
| 481 |
&mmc4 { |
| 482 |
status = "disabled"; |
| 483 |
}; |
| 484 |
|
| 485 |
&mmc5 { |
| 486 |
status = "disabled"; |
| 487 |
}; |
| 488 |
|
| 489 |
&omap4_pmx_core { |
| 490 |
bt_pins: pinmux-bt-pins { |
| 491 |
pinctrl-single,pins = < |
| 492 |
OMAP4_IOPAD(0x1ca, PIN_OUTPUT | MUX_MODE3) /* gpio25 */ |
| 493 |
>; |
| 494 |
}; |
| 495 |
|
| 496 |
cb_v18_pins: pinmux-cb-v18-pins { |
| 497 |
pinctrl-single,pins = < |
| 498 |
OMAP4_IOPAD(0x1d0, PIN_OUTPUT | MUX_MODE3) /* gpio28 */ |
| 499 |
>; |
| 500 |
}; |
| 501 |
|
| 502 |
cb_v33_pins: pinmux-cb-v33-pins { |
| 503 |
pinctrl-single,pins = < |
| 504 |
OMAP4_IOPAD(0x1d2, PIN_OUTPUT | MUX_MODE3) /* gpio190 */ |
| 505 |
>; |
| 506 |
}; |
| 507 |
|
| 508 |
cb_v50_pins: pinmux-cb-v50-pins { |
| 509 |
pinctrl-single,pins = < |
| 510 |
OMAP4_IOPAD(0x1d4, PIN_OUTPUT | MUX_MODE3) /* gpio191 */ |
| 511 |
>; |
| 512 |
}; |
| 513 |
|
| 514 |
gpio_keys_pins: pinmux-gpio-key-pins { |
| 515 |
pinctrl-single,pins = < |
| 516 |
OMAP4_IOPAD(0x56, PIN_INPUT_PULLUP | MUX_MODE3) /* gpio35 */ |
| 517 |
>; |
| 518 |
}; |
| 519 |
|
| 520 |
gpio1_hog_pins: pinmux-gpio1-hog-pins { |
| 521 |
pinctrl-single,pins = < |
| 522 |
OMAP4_IOPAD(0x1b4, PIN_OUTPUT | MUX_MODE3) /* gpio14 */ |
| 523 |
OMAP4_IOPAD(0x1b8, PIN_OUTPUT | MUX_MODE3) /* gpio16 */ |
| 524 |
OMAP4_IOPAD(0x1ba, PIN_OUTPUT | MUX_MODE3) /* gpio17 */ |
| 525 |
|
| 526 |
OMAP4_IOPAD(0x1b6, PIN_OUTPUT | MUX_MODE3) /* gpio15 */ |
| 527 |
OMAP4_IOPAD(0x1bc, PIN_OUTPUT | MUX_MODE3) /* gpio18 */ |
| 528 |
OMAP4_IOPAD(0x1be, PIN_OUTPUT | MUX_MODE3) /* gpio19 */ |
| 529 |
OMAP4_IOPAD(0x1c0, PIN_OUTPUT | MUX_MODE3) /* gpio20 */ |
| 530 |
OMAP4_IOPAD(0x1c2, PIN_OUTPUT | MUX_MODE3) /* gpio21 */ |
| 531 |
OMAP4_IOPAD(0x1c4, PIN_OUTPUT | MUX_MODE3) /* gpio22 */ |
| 532 |
OMAP4_IOPAD(0x1cc, PIN_OUTPUT | MUX_MODE3) /* gpio26 */ |
| 533 |
>; |
| 534 |
}; |
| 535 |
|
| 536 |
i2c1_pins: pinmux-i2c1-pins { |
| 537 |
pinctrl-single,pins = < |
| 538 |
OMAP4_IOPAD(0x122, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_scl */ |
| 539 |
OMAP4_IOPAD(0x124, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_sda */ |
| 540 |
>; |
| 541 |
}; |
| 542 |
|
| 543 |
i2c2_pins: pinmux-i2c2-pins { |
| 544 |
pinctrl-single,pins = < |
| 545 |
OMAP4_IOPAD(0x126, PIN_INPUT | MUX_MODE0) /* i2c2_scl */ |
| 546 |
OMAP4_IOPAD(0x128, PIN_INPUT | MUX_MODE0) /* i2c2_sda */ |
| 547 |
>; |
| 548 |
}; |
| 549 |
|
| 550 |
i2c3_pins: pinmux-i2c3-pins { |
| 551 |
pinctrl-single,pins = < |
| 552 |
OMAP4_IOPAD(0x12a, PIN_INPUT | MUX_MODE0) /* i2c3_scl */ |
| 553 |
OMAP4_IOPAD(0x12c, PIN_INPUT | MUX_MODE0) /* i2c3_sda */ |
| 554 |
>; |
| 555 |
}; |
| 556 |
|
| 557 |
i2c4_pins: pinmux-i2c4-pins { |
| 558 |
pinctrl-single,pins = < |
| 559 |
OMAP4_IOPAD(0x12e, PIN_INPUT | MUX_MODE0) /* i2c4_scl */ |
| 560 |
OMAP4_IOPAD(0x130, PIN_INPUT | MUX_MODE0) /* i2c4_sda */ |
| 561 |
>; |
| 562 |
}; |
| 563 |
|
| 564 |
keypad_pins: pinmux-keypad-pins { |
| 565 |
pinctrl-single,pins = < |
| 566 |
/* kpd_row0 */ |
| 567 |
OMAP4_IOPAD(0x0050, PIN_INPUT_PULLUP | MUX_MODE1) |
| 568 |
/* kpd_row1 */ |
| 569 |
OMAP4_IOPAD(0x0052, PIN_INPUT_PULLUP | MUX_MODE1) |
| 570 |
/* kpd_row2 */ |
| 571 |
OMAP4_IOPAD(0x0054, PIN_INPUT_PULLUP | MUX_MODE1) |
| 572 |
/* kpd_col0 */ |
| 573 |
OMAP4_IOPAD(0x0058, PIN_OUTPUT | MUX_MODE1) |
| 574 |
/* kpd_col1 */ |
| 575 |
OMAP4_IOPAD(0x005a, PIN_OUTPUT | MUX_MODE1) |
| 576 |
/* kpd_col2 */ |
| 577 |
OMAP4_IOPAD(0x005c, PIN_OUTPUT | MUX_MODE1) |
| 578 |
>; |
| 579 |
}; |
| 580 |
|
| 581 |
lb_v50_pins: pinmux-lb-v50-pins { |
| 582 |
pinctrl-single,pins = < |
| 583 |
OMAP4_IOPAD(0x1ce, PIN_OUTPUT | MUX_MODE3) /* gpio27 */ |
| 584 |
>; |
| 585 |
}; |
| 586 |
|
| 587 |
mcbsp2_pins: pinmux-mcbsp2-pins { |
| 588 |
pinctrl-single,pins = < |
| 589 |
OMAP4_IOPAD(0x0f6, PIN_INPUT | MUX_MODE0) /* abe_mcbsp2_clkx */ |
| 590 |
OMAP4_IOPAD(0x0f8, PIN_INPUT | MUX_MODE0) /* abe_mcbsp2_dr */ |
| 591 |
OMAP4_IOPAD(0x0fa, PIN_OUTPUT | MUX_MODE0) /* abe_mcbsp2_dx */ |
| 592 |
OMAP4_IOPAD(0x0fc, PIN_INPUT | MUX_MODE0) /* abe_mcbsp2_fsx */ |
| 593 |
>; |
| 594 |
}; |
| 595 |
|
| 596 |
mpu9150_pins: pinmux-mpu9150-pins { |
| 597 |
pinctrl-single,pins = < |
| 598 |
OMAP4_IOPAD(0x5e, PIN_INPUT_PULLUP | MUX_MODE3) |
| 599 |
>; |
| 600 |
}; |
| 601 |
|
| 602 |
mpu9150h_pins: pinmux-mpu9150h-pins { |
| 603 |
pinctrl-single,pins = < |
| 604 |
OMAP4_IOPAD(0x76, PIN_INPUT_PULLUP | MUX_MODE3) |
| 605 |
>; |
| 606 |
}; |
| 607 |
|
| 608 |
tlv320aic3x_pins: pinmux-tlv320aic3x-pins { |
| 609 |
pinctrl-single,pins = < |
| 610 |
OMAP4_IOPAD(0x7e, PIN_OUTPUT | MUX_MODE3) |
| 611 |
>; |
| 612 |
}; |
| 613 |
|
| 614 |
uart2_pins: pinmux-uart2-pins { |
| 615 |
pinctrl-single,pins = < |
| 616 |
OMAP4_IOPAD(0x118, PIN_INPUT_PULLUP | MUX_MODE0) /* uart2_cts.uart2_cts */ |
| 617 |
OMAP4_IOPAD(0x11a, PIN_OUTPUT | MUX_MODE0) /* uart2_rts.uart2_rts */ |
| 618 |
OMAP4_IOPAD(0x11c, PIN_INPUT_PULLUP | MUX_MODE0) /* uart2_rx.uart2_rx */ |
| 619 |
OMAP4_IOPAD(0x11e, PIN_OUTPUT | MUX_MODE0) /* uart2_tx.uart2_tx */ |
| 620 |
>; |
| 621 |
}; |
| 622 |
|
| 623 |
uart3_pins: pinmux-uart3-pins { |
| 624 |
pinctrl-single,pins = < |
| 625 |
OMAP4_IOPAD(0x144, PIN_INPUT | MUX_MODE0) /* uart3_rx_irrx */ |
| 626 |
OMAP4_IOPAD(0x146, PIN_OUTPUT | MUX_MODE0) /* uart3_tx_irtx */ |
| 627 |
>; |
| 628 |
}; |
| 629 |
|
| 630 |
usb_otg_hs_pins: pinmux-usb-otg-hs-pins { |
| 631 |
pinctrl-single,pins = < |
| 632 |
OMAP4_IOPAD(0x194, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* usba0_otg_ce */ |
| 633 |
OMAP4_IOPAD(0x196, PIN_INPUT | MUX_MODE0) /* usba0_otg_dp */ |
| 634 |
OMAP4_IOPAD(0x198, PIN_INPUT | MUX_MODE0) /* usba0_otg_dm */ |
| 635 |
>; |
| 636 |
}; |
| 637 |
|
| 638 |
wl12xx_pins: pinmux-wl12xx-pins { |
| 639 |
pinctrl-single,pins = < |
| 640 |
OMAP4_IOPAD(0x1c6, PIN_INPUT | MUX_MODE3) /* gpio_23 / IRQ */ |
| 641 |
OMAP4_IOPAD(0x16c, PIN_INPUT_PULLUP | MUX_MODE2) /* sdmmc3_dat2 */ |
| 642 |
OMAP4_IOPAD(0x16e, PIN_INPUT_PULLUP | MUX_MODE2) /* sdmmc3_dat1 */ |
| 643 |
OMAP4_IOPAD(0x170, PIN_INPUT_PULLUP | MUX_MODE2) /* sdmmc3_dat0 */ |
| 644 |
OMAP4_IOPAD(0x172, PIN_INPUT_PULLUP | MUX_MODE2) /* sdmmc3_dat3 */ |
| 645 |
OMAP4_IOPAD(0x174, PIN_INPUT_PULLUP | MUX_MODE2) /* sdmmc3_cmd */ |
| 646 |
OMAP4_IOPAD(0x176, PIN_INPUT_PULLUP | MUX_MODE2) /* sdmmc3_clk */ |
| 647 |
>; |
| 648 |
}; |
| 649 |
|
| 650 |
wl12xx_gpio: pinmux-wl12xx-gpio-pins { |
| 651 |
pinctrl-single,pins = < |
| 652 |
OMAP4_IOPAD(0x1c8, PIN_OUTPUT | MUX_MODE3) /* gpio_24 / WLAN_EN */ |
| 653 |
>; |
| 654 |
}; |
| 655 |
}; |
| 656 |
|
| 657 |
&omap4_pmx_wkup { |
| 658 |
gpio1wk_hog_pins: pinmux-gpio1wk-hog-pins { |
| 659 |
pinctrl-single,pins = < |
| 660 |
OMAP4_IOPAD(0x68, PIN_INPUT_PULLDOWN | MUX_MODE3) /* gpio9 */ |
| 661 |
OMAP4_IOPAD(0x6a, PIN_INPUT | MUX_MODE3) /* gpio10 */ |
| 662 |
>; |
| 663 |
}; |
| 664 |
}; |
| 665 |
|
| 666 |
&uart2 { |
| 667 |
pinctrl-names = "default"; |
| 668 |
pinctrl-0 = <&uart2_pins &bt_pins>; |
| 669 |
interrupts-extended = <&wakeupgen GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH |
| 670 |
&omap4_pmx_core OMAP4_UART2_RX>; |
| 671 |
|
| 672 |
bluetooth-gnss { |
| 673 |
compatible = "ti,wl1283-st"; |
| 674 |
enable-gpios = <&gpio1 25 GPIO_ACTIVE_HIGH>; /* GPIO_25 */ |
| 675 |
clocks = <&twl 1>; |
| 676 |
clock-names = "ext_clock"; |
| 677 |
}; |
| 678 |
}; |
| 679 |
|
| 680 |
&uart3 { |
| 681 |
pinctrl-names = "default"; |
| 682 |
pinctrl-0 = <&uart3_pins>; |
| 683 |
interrupts-extended = <&wakeupgen GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH |
| 684 |
&omap4_pmx_core OMAP4_UART3_RX>; |
| 685 |
}; |
| 686 |
|
| 687 |
&usb_otg_hs { |
| 688 |
pinctrl-names = "default"; |
| 689 |
pinctrl-0 = <&usb_otg_hs_pins>; |
| 690 |
|
| 691 |
interface-type = <1>; |
| 692 |
mode = <3>; |
| 693 |
power = <50>; |
| 694 |
}; |
| 695 |
|
| 696 |
&usbhshost { |
| 697 |
status = "disabled"; |
| 698 |
}; |