| 1 |
// SPDX-License-Identifier: GPL-2.0-only |
| 2 |
/* |
| 3 |
* Device Tree Source for OMAP34xx/OMAP35xx SoC |
| 4 |
* |
| 5 |
* Copyright (C) 2013 Texas Instruments Incorporated - https://www.ti.com/ |
| 6 |
*/ |
| 7 |
|
| 8 |
#include <dt-bindings/bus/ti-sysc.h> |
| 9 |
#include <dt-bindings/media/omap3-isp.h> |
| 10 |
|
| 11 |
#include "omap3.dtsi" |
| 12 |
|
| 13 |
/ { |
| 14 |
cpus { |
| 15 |
cpu: cpu@0 { |
| 16 |
/* OMAP343x/OMAP35xx variants OPP1-6 */ |
| 17 |
operating-points-v2 = <&cpu0_opp_table>; |
| 18 |
|
| 19 |
clock-latency = <300000>; /* From legacy driver */ |
| 20 |
#cooling-cells = <2>; |
| 21 |
}; |
| 22 |
}; |
| 23 |
|
| 24 |
cpu0_opp_table: opp-table { |
| 25 |
compatible = "operating-points-v2-ti-cpu"; |
| 26 |
syscon = <&scm_conf>; |
| 27 |
|
| 28 |
opp-125000000 { |
| 29 |
opp-hz = /bits/ 64 <125000000>; |
| 30 |
/* |
| 31 |
* we currently only select the max voltage from table |
| 32 |
* Table 3-3 of the omap3530 Data sheet (SPRS507F). |
| 33 |
* Format is: <target min max> |
| 34 |
*/ |
| 35 |
opp-microvolt = <975000 975000 975000>; |
| 36 |
/* |
| 37 |
* first value is silicon revision bit mask |
| 38 |
* second one 720MHz Device Identification bit mask |
| 39 |
*/ |
| 40 |
opp-supported-hw = <0xffffffff 3>; |
| 41 |
}; |
| 42 |
|
| 43 |
opp-250000000 { |
| 44 |
opp-hz = /bits/ 64 <250000000>; |
| 45 |
opp-microvolt = <1075000 1075000 1075000>; |
| 46 |
opp-supported-hw = <0xffffffff 3>; |
| 47 |
opp-suspend; |
| 48 |
}; |
| 49 |
|
| 50 |
opp-500000000 { |
| 51 |
opp-hz = /bits/ 64 <500000000>; |
| 52 |
opp-microvolt = <1200000 1200000 1200000>; |
| 53 |
opp-supported-hw = <0xffffffff 3>; |
| 54 |
}; |
| 55 |
|
| 56 |
opp-550000000 { |
| 57 |
opp-hz = /bits/ 64 <550000000>; |
| 58 |
opp-microvolt = <1275000 1275000 1275000>; |
| 59 |
opp-supported-hw = <0xffffffff 3>; |
| 60 |
}; |
| 61 |
|
| 62 |
opp-600000000 { |
| 63 |
opp-hz = /bits/ 64 <600000000>; |
| 64 |
opp-microvolt = <1350000 1350000 1350000>; |
| 65 |
opp-supported-hw = <0xffffffff 3>; |
| 66 |
}; |
| 67 |
|
| 68 |
opp-720000000 { |
| 69 |
opp-hz = /bits/ 64 <720000000>; |
| 70 |
opp-microvolt = <1350000 1350000 1350000>; |
| 71 |
/* only high-speed grade omap3530 devices */ |
| 72 |
opp-supported-hw = <0xffffffff 2>; |
| 73 |
turbo-mode; |
| 74 |
}; |
| 75 |
}; |
| 76 |
|
| 77 |
ocp@68000000 { |
| 78 |
omap3_pmx_core2: pinmux@480025d8 { |
| 79 |
compatible = "ti,omap3-padconf", "pinctrl-single"; |
| 80 |
reg = <0x480025d8 0x24>; |
| 81 |
#address-cells = <1>; |
| 82 |
#size-cells = <0>; |
| 83 |
#pinctrl-cells = <1>; |
| 84 |
#interrupt-cells = <1>; |
| 85 |
interrupt-controller; |
| 86 |
pinctrl-single,register-width = <16>; |
| 87 |
pinctrl-single,function-mask = <0xff1f>; |
| 88 |
}; |
| 89 |
|
| 90 |
isp: isp@480bc000 { |
| 91 |
compatible = "ti,omap3-isp"; |
| 92 |
reg = <0x480bc000 0x12fc |
| 93 |
0x480bd800 0x017c>; |
| 94 |
interrupts = <24>; |
| 95 |
iommus = <&mmu_isp>; |
| 96 |
syscon = <&scm_conf 0x6c>; |
| 97 |
ti,phy-type = <OMAP3ISP_PHY_TYPE_COMPLEX_IO>; |
| 98 |
#clock-cells = <1>; |
| 99 |
ports { |
| 100 |
#address-cells = <1>; |
| 101 |
#size-cells = <0>; |
| 102 |
}; |
| 103 |
}; |
| 104 |
|
| 105 |
bandgap: bandgap@48002524 { |
| 106 |
reg = <0x48002524 0x4>; |
| 107 |
compatible = "ti,omap34xx-bandgap"; |
| 108 |
#thermal-sensor-cells = <0>; |
| 109 |
}; |
| 110 |
|
| 111 |
target-module@480cb000 { |
| 112 |
compatible = "ti,sysc-omap3430-sr", "ti,sysc"; |
| 113 |
ti,hwmods = "smartreflex_core"; |
| 114 |
reg = <0x480cb024 0x4>; |
| 115 |
reg-names = "sysc"; |
| 116 |
ti,sysc-mask = <SYSC_OMAP2_CLOCKACTIVITY>; |
| 117 |
clocks = <&sr2_fck>; |
| 118 |
clock-names = "fck"; |
| 119 |
#address-cells = <1>; |
| 120 |
#size-cells = <1>; |
| 121 |
ranges = <0 0x480cb000 0x001000>; |
| 122 |
|
| 123 |
smartreflex_core: smartreflex@0 { |
| 124 |
compatible = "ti,omap3-smartreflex-core"; |
| 125 |
reg = <0 0x400>; |
| 126 |
interrupts = <19>; |
| 127 |
}; |
| 128 |
}; |
| 129 |
|
| 130 |
target-module@480c9000 { |
| 131 |
compatible = "ti,sysc-omap3430-sr", "ti,sysc"; |
| 132 |
ti,hwmods = "smartreflex_mpu_iva"; |
| 133 |
reg = <0x480c9024 0x4>; |
| 134 |
reg-names = "sysc"; |
| 135 |
ti,sysc-mask = <SYSC_OMAP2_CLOCKACTIVITY>; |
| 136 |
clocks = <&sr1_fck>; |
| 137 |
clock-names = "fck"; |
| 138 |
#address-cells = <1>; |
| 139 |
#size-cells = <1>; |
| 140 |
ranges = <0 0x480c9000 0x001000>; |
| 141 |
|
| 142 |
smartreflex_mpu_iva: smartreflex@480c9000 { |
| 143 |
compatible = "ti,omap3-smartreflex-mpu-iva"; |
| 144 |
reg = <0 0x400>; |
| 145 |
interrupts = <18>; |
| 146 |
}; |
| 147 |
}; |
| 148 |
|
| 149 |
/* |
| 150 |
* On omap34xx the OCP registers do not seem to be accessible |
| 151 |
* at all unlike on 36xx. Maybe SGX is permanently set to |
| 152 |
* "OCP bypass mode", or maybe there is OCP_SYSCONFIG that is |
| 153 |
* write-only at 0x50000e10. We detect SGX based on the SGX |
| 154 |
* revision register instead of the unreadable OCP revision |
| 155 |
* register. Also note that on early 34xx es1 revision there |
| 156 |
* are also different clocks, but we do not have any dts users |
| 157 |
* for it. |
| 158 |
*/ |
| 159 |
sgx_module: target-module@50000000 { |
| 160 |
compatible = "ti,sysc-omap2", "ti,sysc"; |
| 161 |
reg = <0x50000014 0x4>; |
| 162 |
reg-names = "rev"; |
| 163 |
clocks = <&sgx_fck>, <&sgx_ick>; |
| 164 |
clock-names = "fck", "ick"; |
| 165 |
#address-cells = <1>; |
| 166 |
#size-cells = <1>; |
| 167 |
ranges = <0 0x50000000 0x10000>; |
| 168 |
|
| 169 |
gpu@0 { |
| 170 |
compatible = "ti,omap3430-gpu", "img,powervr-sgx530"; |
| 171 |
reg = <0x0 0x10000>; /* 64kB */ |
| 172 |
interrupts = <21>; |
| 173 |
}; |
| 174 |
}; |
| 175 |
}; |
| 176 |
|
| 177 |
thermal_zones: thermal-zones { |
| 178 |
#include "omap3-cpu-thermal.dtsi" |
| 179 |
}; |
| 180 |
}; |
| 181 |
|
| 182 |
&ssi { |
| 183 |
status = "okay"; |
| 184 |
|
| 185 |
clocks = <&ssi_ssr_fck>, |
| 186 |
<&ssi_sst_fck>, |
| 187 |
<&ssi_ick>; |
| 188 |
clock-names = "ssi_ssr_fck", |
| 189 |
"ssi_sst_fck", |
| 190 |
"ssi_ick"; |
| 191 |
}; |
| 192 |
|
| 193 |
&usb_otg_target { |
| 194 |
clocks = <&hsotgusb_ick_3430es2>; |
| 195 |
}; |
| 196 |
|
| 197 |
/include/ "omap34xx-omap36xx-clocks.dtsi" |
| 198 |
/include/ "omap36xx-omap3430es2plus-clocks.dtsi" |
| 199 |
/include/ "omap36xx-am35xx-omap3430es2plus-clocks.dtsi" |