| 1 |
// SPDX-License-Identifier: GPL-2.0-only |
| 2 |
/* |
| 3 |
* Copyright (C) 2014 Florian Vaussard, EPFL Mobots group |
| 4 |
*/ |
| 5 |
|
| 6 |
#include "omap443x.dtsi" |
| 7 |
#include "omap4-mcpdm.dtsi" |
| 8 |
|
| 9 |
/ { |
| 10 |
model = "Gumstix Duovero"; |
| 11 |
compatible = "gumstix,omap4-duovero", "ti,omap4430", "ti,omap4"; |
| 12 |
|
| 13 |
chosen { |
| 14 |
stdout-path = &uart3; |
| 15 |
}; |
| 16 |
|
| 17 |
memory@80000000 { |
| 18 |
device_type = "memory"; |
| 19 |
reg = <0x80000000 0x40000000>; /* 1 GB */ |
| 20 |
}; |
| 21 |
|
| 22 |
sound { |
| 23 |
compatible = "ti,abe-twl6040"; |
| 24 |
ti,model = "DuoVero"; |
| 25 |
|
| 26 |
ti,mclk-freq = <38400000>; |
| 27 |
|
| 28 |
ti,mcpdm = <&mcpdm>; |
| 29 |
|
| 30 |
ti,twl6040 = <&twl6040>; |
| 31 |
|
| 32 |
/* Audio routing */ |
| 33 |
ti,audio-routing = |
| 34 |
"Headset Stereophone", "HSOL", |
| 35 |
"Headset Stereophone", "HSOR", |
| 36 |
"HSMIC", "Headset Mic", |
| 37 |
"Headset Mic", "Headset Mic Bias"; |
| 38 |
}; |
| 39 |
|
| 40 |
/* HS USB Host PHY on PORT 1 */ |
| 41 |
hsusb1_phy: hsusb1_phy { |
| 42 |
compatible = "usb-nop-xceiv"; |
| 43 |
reset-gpios = <&gpio2 30 GPIO_ACTIVE_LOW>; /* gpio_62 */ |
| 44 |
#phy-cells = <0>; |
| 45 |
|
| 46 |
pinctrl-names = "default"; |
| 47 |
pinctrl-0 = <&hsusb1phy_pins>; |
| 48 |
|
| 49 |
clocks = <&auxclk3_ck>; |
| 50 |
clock-names = "main_clk"; |
| 51 |
clock-frequency = <19200000>; |
| 52 |
}; |
| 53 |
|
| 54 |
/* regulator for w2cbw0015 on sdio5 */ |
| 55 |
w2cbw0015_vmmc: w2cbw0015_vmmc { |
| 56 |
pinctrl-names = "default"; |
| 57 |
pinctrl-0 = <&w2cbw0015_pins>; |
| 58 |
compatible = "regulator-fixed"; |
| 59 |
regulator-name = "w2cbw0015"; |
| 60 |
regulator-min-microvolt = <3000000>; |
| 61 |
regulator-max-microvolt = <3000000>; |
| 62 |
gpio = <&gpio2 11 GPIO_ACTIVE_LOW>; /* gpio_43 */ |
| 63 |
startup-delay-us = <70000>; |
| 64 |
enable-active-high; |
| 65 |
regulator-boot-on; |
| 66 |
}; |
| 67 |
}; |
| 68 |
|
| 69 |
&omap4_pmx_core { |
| 70 |
pinctrl-names = "default"; |
| 71 |
pinctrl-0 = < |
| 72 |
&twl6040_pins |
| 73 |
&hsusbb1_pins |
| 74 |
>; |
| 75 |
|
| 76 |
twl6040_pins: twl6040-pins { |
| 77 |
pinctrl-single,pins = < |
| 78 |
OMAP4_IOPAD(0x166, PIN_OUTPUT | MUX_MODE3) /* usbb2_ulpitll_nxt.gpio_160 */ |
| 79 |
OMAP4_IOPAD(0x1a0, PIN_INPUT | MUX_MODE0) /* sys_nirq2.sys_nirq2 */ |
| 80 |
>; |
| 81 |
}; |
| 82 |
|
| 83 |
mcbsp1_pins: mcbsp1-pins { |
| 84 |
pinctrl-single,pins = < |
| 85 |
OMAP4_IOPAD(0x0fe, PIN_INPUT | MUX_MODE0) /* abe_mcbsp1_clkx.abe_mcbsp1_clkx */ |
| 86 |
OMAP4_IOPAD(0x100, PIN_INPUT_PULLDOWN | MUX_MODE0) /* abe_mcbsp1_dr.abe_mcbsp1_dr */ |
| 87 |
OMAP4_IOPAD(0x102, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* abe_mcbsp1_dx.abe_mcbsp1_dx */ |
| 88 |
OMAP4_IOPAD(0x104, PIN_INPUT | MUX_MODE0) /* abe_mcbsp1_fsx.abe_mcbsp1_fsx */ |
| 89 |
>; |
| 90 |
}; |
| 91 |
|
| 92 |
hsusbb1_pins: hsusbb1-pins { |
| 93 |
pinctrl-single,pins = < |
| 94 |
OMAP4_IOPAD(0x0c2, PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_clk.usbb1_ulpiphy_clk */ |
| 95 |
OMAP4_IOPAD(0x0c4, PIN_OUTPUT | MUX_MODE4) /* usbb1_ulpitll_stp.usbb1_ulpiphy_stp */ |
| 96 |
OMAP4_IOPAD(0x0c6, PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_dir.usbb1_ulpiphy_dir */ |
| 97 |
OMAP4_IOPAD(0x0c8, PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_nxt.usbb1_ulpiphy_nxt */ |
| 98 |
OMAP4_IOPAD(0x0ca, PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_dat0.usbb1_ulpiphy_dat0 */ |
| 99 |
OMAP4_IOPAD(0x0cc, PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_dat1.usbb1_ulpiphy_dat1 */ |
| 100 |
OMAP4_IOPAD(0x0ce, PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_dat2.usbb1_ulpiphy_dat2 */ |
| 101 |
OMAP4_IOPAD(0x0d0, PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_dat3.usbb1_ulpiphy_dat3 */ |
| 102 |
OMAP4_IOPAD(0x0d2, PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_dat4.usbb1_ulpiphy_dat4 */ |
| 103 |
OMAP4_IOPAD(0x0d4, PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_dat5.usbb1_ulpiphy_dat5 */ |
| 104 |
OMAP4_IOPAD(0x0d6, PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_dat6.usbb1_ulpiphy_dat6 */ |
| 105 |
OMAP4_IOPAD(0x0d8, PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_dat7.usbb1_ulpiphy_dat7 */ |
| 106 |
>; |
| 107 |
}; |
| 108 |
|
| 109 |
hsusb1phy_pins: hsusb1phy-pins { |
| 110 |
pinctrl-single,pins = < |
| 111 |
OMAP4_IOPAD(0x08c, PIN_OUTPUT | MUX_MODE3) /* gpmc_wait1.gpio_62 */ |
| 112 |
>; |
| 113 |
}; |
| 114 |
|
| 115 |
w2cbw0015_pins: w2cbw0015-pins { |
| 116 |
pinctrl-single,pins = < |
| 117 |
OMAP4_IOPAD(0x066, PIN_OUTPUT | MUX_MODE3) /* gpmc_a19.gpio_43 */ |
| 118 |
OMAP4_IOPAD(0x07a, PIN_INPUT | MUX_MODE3) /* gpmc_ncs3.gpio_53 */ |
| 119 |
>; |
| 120 |
}; |
| 121 |
|
| 122 |
i2c1_pins: i2c1-pins { |
| 123 |
pinctrl-single,pins = < |
| 124 |
OMAP4_IOPAD(0x122, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_scl */ |
| 125 |
OMAP4_IOPAD(0x124, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_sda */ |
| 126 |
>; |
| 127 |
}; |
| 128 |
|
| 129 |
i2c4_pins: i2c4-pins { |
| 130 |
pinctrl-single,pins = < |
| 131 |
OMAP4_IOPAD(0x12e, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c4_scl */ |
| 132 |
OMAP4_IOPAD(0x130, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c4_sda */ |
| 133 |
>; |
| 134 |
}; |
| 135 |
|
| 136 |
mmc1_pins: mmc1-pins { |
| 137 |
pinctrl-single,pins = < |
| 138 |
OMAP4_IOPAD(0x0e2, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_clk */ |
| 139 |
OMAP4_IOPAD(0x0e4, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmcc1_cmd */ |
| 140 |
OMAP4_IOPAD(0x0e6, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmcc1_dat0 */ |
| 141 |
OMAP4_IOPAD(0x0e8, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat1 */ |
| 142 |
OMAP4_IOPAD(0x0ea, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat2 */ |
| 143 |
OMAP4_IOPAD(0x0ec, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat3 */ |
| 144 |
>; |
| 145 |
}; |
| 146 |
|
| 147 |
mmc5_pins: mmc5-pins { |
| 148 |
pinctrl-single,pins = < |
| 149 |
OMAP4_IOPAD(0x148, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_clk */ |
| 150 |
OMAP4_IOPAD(0x14a, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmcc5_cmd */ |
| 151 |
OMAP4_IOPAD(0x14c, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmcc5_dat0 */ |
| 152 |
OMAP4_IOPAD(0x14e, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_dat1 */ |
| 153 |
OMAP4_IOPAD(0x150, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_dat2 */ |
| 154 |
OMAP4_IOPAD(0x152, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_dat3 */ |
| 155 |
>; |
| 156 |
}; |
| 157 |
}; |
| 158 |
|
| 159 |
/* PMIC */ |
| 160 |
&i2c1 { |
| 161 |
pinctrl-names = "default"; |
| 162 |
pinctrl-0 = <&i2c1_pins>; |
| 163 |
|
| 164 |
clock-frequency = <400000>; |
| 165 |
|
| 166 |
twl: twl@48 { |
| 167 |
reg = <0x48>; |
| 168 |
interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; /* IRQ_SYS_1N cascaded to gic */ |
| 169 |
}; |
| 170 |
|
| 171 |
twl6040: twl@4b { |
| 172 |
compatible = "ti,twl6040"; |
| 173 |
#clock-cells = <0>; |
| 174 |
reg = <0x4b>; |
| 175 |
interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>; /* IRQ_SYS_2N cascaded to gic */ |
| 176 |
ti,audpwron-gpio = <&gpio6 0 GPIO_ACTIVE_HIGH>; /* gpio_160 */ |
| 177 |
|
| 178 |
vio-supply = <&v1v8>; |
| 179 |
v2v1-supply = <&v2v1>; |
| 180 |
enable-active-high; |
| 181 |
}; |
| 182 |
}; |
| 183 |
|
| 184 |
#include "twl6030.dtsi" |
| 185 |
#include "twl6030_omap4.dtsi" |
| 186 |
|
| 187 |
/* on-board bluetooth / WiFi module */ |
| 188 |
&i2c4 { |
| 189 |
pinctrl-names = "default"; |
| 190 |
pinctrl-0 = <&i2c4_pins>; |
| 191 |
|
| 192 |
clock-frequency = <400000>; |
| 193 |
}; |
| 194 |
|
| 195 |
&mcbsp1 { |
| 196 |
pinctrl-names = "default"; |
| 197 |
pinctrl-0 = <&mcbsp1_pins>; |
| 198 |
status = "okay"; |
| 199 |
}; |
| 200 |
|
| 201 |
&mmc1 { |
| 202 |
pinctrl-names = "default"; |
| 203 |
pinctrl-0 = <&mmc1_pins>; |
| 204 |
|
| 205 |
vmmc-supply = <&vmmc>; |
| 206 |
ti,bus-width = <4>; |
| 207 |
ti,non-removable; /* FIXME: use PMIC_MMC detect */ |
| 208 |
}; |
| 209 |
|
| 210 |
&mmc2 { |
| 211 |
status = "disabled"; |
| 212 |
}; |
| 213 |
|
| 214 |
/* mmc3 is available to the expansion board */ |
| 215 |
|
| 216 |
&mmc4 { |
| 217 |
status = "disabled"; |
| 218 |
}; |
| 219 |
|
| 220 |
/* on-board WiFi module */ |
| 221 |
&mmc5 { |
| 222 |
pinctrl-names = "default"; |
| 223 |
pinctrl-0 = <&mmc5_pins>; |
| 224 |
|
| 225 |
vmmc-supply = <&w2cbw0015_vmmc>; |
| 226 |
ti,bus-width = <4>; |
| 227 |
ti,non-removable; |
| 228 |
cap-power-off-card; |
| 229 |
keep-power-in-suspend; |
| 230 |
}; |
| 231 |
|
| 232 |
&twl_usb_comparator { |
| 233 |
usb-supply = <&vusb>; |
| 234 |
}; |
| 235 |
|
| 236 |
&usb_otg_hs { |
| 237 |
interface-type = <1>; |
| 238 |
mode = <3>; |
| 239 |
power = <50>; |
| 240 |
}; |
| 241 |
|
| 242 |
&usbhshost { |
| 243 |
port1-mode = "ehci-phy"; |
| 244 |
}; |
| 245 |
|
| 246 |
&usbhsehci { |
| 247 |
phys = <&hsusb1_phy>; |
| 248 |
}; |
| 249 |
|