| 1 |
// SPDX-License-Identifier: GPL-2.0 |
| 2 |
/* |
| 3 |
* Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/ |
| 4 |
* |
| 5 |
* Author: Robert Nelson <[email protected]> |
| 6 |
*/ |
| 7 |
|
| 8 |
/ { |
| 9 |
cpus { |
| 10 |
cpu@0 { |
| 11 |
cpu0-supply = <&dcdc2_reg>; |
| 12 |
}; |
| 13 |
}; |
| 14 |
|
| 15 |
memory@80000000 { |
| 16 |
device_type = "memory"; |
| 17 |
reg = <0x80000000 0x20000000>; /* 512 MB */ |
| 18 |
}; |
| 19 |
}; |
| 20 |
|
| 21 |
&cpu0_opp_table { |
| 22 |
/* |
| 23 |
* Octavo Systems: |
| 24 |
* The EFUSE_SMA register is not programmed for any of the AM335x wafers |
| 25 |
* we get and we are not programming them during our production test. |
| 26 |
* Therefore, from a DEVICE_ID revision point of view, the silicon looks |
| 27 |
* like it is Revision 2.1. However, from an EFUSE_SMA point of view for |
| 28 |
* the HW OPP table, the silicon looks like it is Revision 1.0 (ie the |
| 29 |
* EFUSE_SMA register reads as all zeros). |
| 30 |
*/ |
| 31 |
opp-1000000000 { |
| 32 |
/* OPP Nitro */ |
| 33 |
opp-supported-hw = <0x06 0x0100>; |
| 34 |
}; |
| 35 |
}; |
| 36 |
|
| 37 |
&am33xx_pinmux { |
| 38 |
i2c0_pins: pinmux-i2c0-pins { |
| 39 |
pinctrl-single,pins = < |
| 40 |
AM33XX_PADCONF(AM335X_PIN_I2C0_SDA, PIN_INPUT_PULLUP, MUX_MODE0) |
| 41 |
AM33XX_PADCONF(AM335X_PIN_I2C0_SCL, PIN_INPUT_PULLUP, MUX_MODE0) |
| 42 |
>; |
| 43 |
}; |
| 44 |
}; |
| 45 |
|
| 46 |
&i2c0 { |
| 47 |
pinctrl-names = "default"; |
| 48 |
pinctrl-0 = <&i2c0_pins>; |
| 49 |
|
| 50 |
status = "okay"; |
| 51 |
clock-frequency = <400000>; |
| 52 |
|
| 53 |
tps: tps@24 { |
| 54 |
reg = <0x24>; |
| 55 |
}; |
| 56 |
}; |
| 57 |
|
| 58 |
/include/ "../../tps65217.dtsi" |
| 59 |
|
| 60 |
&tps { |
| 61 |
interrupts = <7>; /* NMI */ |
| 62 |
interrupt-parent = <&intc>; |
| 63 |
|
| 64 |
ti,pmic-shutdown-controller; |
| 65 |
|
| 66 |
pwrbutton { |
| 67 |
interrupts = <2>; |
| 68 |
status = "okay"; |
| 69 |
}; |
| 70 |
|
| 71 |
regulators { |
| 72 |
dcdc1_reg: regulator@0 { |
| 73 |
regulator-name = "vdds_dpr"; |
| 74 |
regulator-always-on; |
| 75 |
}; |
| 76 |
|
| 77 |
dcdc2_reg: regulator@1 { |
| 78 |
/* VDD_MPU voltage limits 0.95V - 1.26V with +/-4% tolerance */ |
| 79 |
regulator-name = "vdd_mpu"; |
| 80 |
regulator-min-microvolt = <925000>; |
| 81 |
regulator-max-microvolt = <1351500>; |
| 82 |
regulator-boot-on; |
| 83 |
regulator-always-on; |
| 84 |
}; |
| 85 |
|
| 86 |
dcdc3_reg: regulator@2 { |
| 87 |
/* VDD_CORE voltage limits 0.95V - 1.1V with +/-4% tolerance */ |
| 88 |
regulator-name = "vdd_core"; |
| 89 |
regulator-min-microvolt = <925000>; |
| 90 |
regulator-max-microvolt = <1150000>; |
| 91 |
regulator-boot-on; |
| 92 |
regulator-always-on; |
| 93 |
}; |
| 94 |
|
| 95 |
ldo1_reg: regulator@3 { |
| 96 |
regulator-name = "vio,vrtc,vdds"; |
| 97 |
regulator-always-on; |
| 98 |
}; |
| 99 |
|
| 100 |
ldo2_reg: regulator@4 { |
| 101 |
regulator-name = "vdd_3v3aux"; |
| 102 |
regulator-always-on; |
| 103 |
}; |
| 104 |
|
| 105 |
ldo3_reg: regulator@5 { |
| 106 |
regulator-name = "vdd_1v8"; |
| 107 |
regulator-min-microvolt = <1800000>; |
| 108 |
regulator-max-microvolt = <1800000>; |
| 109 |
regulator-always-on; |
| 110 |
}; |
| 111 |
|
| 112 |
ldo4_reg: regulator@6 { |
| 113 |
regulator-name = "vdd_3v3a"; |
| 114 |
regulator-always-on; |
| 115 |
}; |
| 116 |
}; |
| 117 |
}; |
| 118 |
|
| 119 |
&aes { |
| 120 |
status = "okay"; |
| 121 |
}; |
| 122 |
|
| 123 |
&sham { |
| 124 |
status = "okay"; |
| 125 |
}; |