| 1 |
// SPDX-License-Identifier: GPL-2.0-only |
| 2 |
/* |
| 3 |
* Device Tree Source for OMAP2 SoC |
| 4 |
* |
| 5 |
* Copyright (C) 2011 Texas Instruments Incorporated - https://www.ti.com/ |
| 6 |
*/ |
| 7 |
|
| 8 |
#include <dt-bindings/bus/ti-sysc.h> |
| 9 |
#include <dt-bindings/gpio/gpio.h> |
| 10 |
#include <dt-bindings/interrupt-controller/irq.h> |
| 11 |
#include <dt-bindings/pinctrl/omap.h> |
| 12 |
|
| 13 |
/ { |
| 14 |
compatible = "ti,omap2430", "ti,omap2420", "ti,omap2"; |
| 15 |
interrupt-parent = <&intc>; |
| 16 |
#address-cells = <1>; |
| 17 |
#size-cells = <1>; |
| 18 |
chosen { }; |
| 19 |
|
| 20 |
aliases { |
| 21 |
serial0 = &uart1; |
| 22 |
serial1 = &uart2; |
| 23 |
serial2 = &uart3; |
| 24 |
i2c0 = &i2c1; |
| 25 |
i2c1 = &i2c2; |
| 26 |
}; |
| 27 |
|
| 28 |
cpus { |
| 29 |
#address-cells = <0>; |
| 30 |
#size-cells = <0>; |
| 31 |
|
| 32 |
cpu { |
| 33 |
compatible = "arm,arm1136jf-s"; |
| 34 |
device_type = "cpu"; |
| 35 |
}; |
| 36 |
}; |
| 37 |
|
| 38 |
pmu { |
| 39 |
compatible = "arm,arm1136-pmu"; |
| 40 |
interrupts = <3>; |
| 41 |
}; |
| 42 |
|
| 43 |
soc { |
| 44 |
compatible = "ti,omap-infra"; |
| 45 |
mpu { |
| 46 |
compatible = "ti,omap2-mpu"; |
| 47 |
ti,hwmods = "mpu"; |
| 48 |
}; |
| 49 |
}; |
| 50 |
|
| 51 |
ocp { |
| 52 |
compatible = "simple-bus"; |
| 53 |
#address-cells = <1>; |
| 54 |
#size-cells = <1>; |
| 55 |
ranges; |
| 56 |
ti,hwmods = "l3_main"; |
| 57 |
|
| 58 |
aes: aes@480a6000 { |
| 59 |
compatible = "ti,omap2-aes"; |
| 60 |
ti,hwmods = "aes"; |
| 61 |
reg = <0x480a6000 0x50>; |
| 62 |
dmas = <&sdma 9 &sdma 10>; |
| 63 |
dma-names = "tx", "rx"; |
| 64 |
}; |
| 65 |
|
| 66 |
hdq1w: 1w@480b2000 { |
| 67 |
compatible = "ti,omap2420-1w"; |
| 68 |
ti,hwmods = "hdq1w"; |
| 69 |
reg = <0x480b2000 0x1000>; |
| 70 |
interrupts = <58>; |
| 71 |
}; |
| 72 |
|
| 73 |
intc: interrupt-controller@1 { |
| 74 |
compatible = "ti,omap2-intc"; |
| 75 |
interrupt-controller; |
| 76 |
#interrupt-cells = <1>; |
| 77 |
reg = <0x480FE000 0x1000>; |
| 78 |
}; |
| 79 |
|
| 80 |
target-module@48056000 { |
| 81 |
compatible = "ti,sysc-omap2", "ti,sysc"; |
| 82 |
reg = <0x48056000 0x4>, |
| 83 |
<0x4805602c 0x4>, |
| 84 |
<0x48056028 0x4>; |
| 85 |
reg-names = "rev", "sysc", "syss"; |
| 86 |
ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY | |
| 87 |
SYSC_OMAP2_EMUFREE | |
| 88 |
SYSC_OMAP2_SOFTRESET | |
| 89 |
SYSC_OMAP2_AUTOIDLE)>; |
| 90 |
ti,sysc-midle = <SYSC_IDLE_FORCE>, |
| 91 |
<SYSC_IDLE_NO>, |
| 92 |
<SYSC_IDLE_SMART>; |
| 93 |
ti,syss-mask = <1>; |
| 94 |
clocks = <&core_l3_ck>; |
| 95 |
clock-names = "fck"; |
| 96 |
#address-cells = <1>; |
| 97 |
#size-cells = <1>; |
| 98 |
ranges = <0 0x48056000 0x1000>; |
| 99 |
|
| 100 |
sdma: dma-controller@0 { |
| 101 |
compatible = "ti,omap2420-sdma", "ti,omap-sdma"; |
| 102 |
reg = <0 0x1000>; |
| 103 |
interrupts = <12>, |
| 104 |
<13>, |
| 105 |
<14>, |
| 106 |
<15>; |
| 107 |
#dma-cells = <1>; |
| 108 |
dma-channels = <32>; |
| 109 |
dma-requests = <64>; |
| 110 |
}; |
| 111 |
}; |
| 112 |
|
| 113 |
i2c1: i2c@48070000 { |
| 114 |
compatible = "ti,omap2-i2c"; |
| 115 |
ti,hwmods = "i2c1"; |
| 116 |
reg = <0x48070000 0x80>; |
| 117 |
#address-cells = <1>; |
| 118 |
#size-cells = <0>; |
| 119 |
interrupts = <56>; |
| 120 |
}; |
| 121 |
|
| 122 |
i2c2: i2c@48072000 { |
| 123 |
compatible = "ti,omap2-i2c"; |
| 124 |
ti,hwmods = "i2c2"; |
| 125 |
reg = <0x48072000 0x80>; |
| 126 |
#address-cells = <1>; |
| 127 |
#size-cells = <0>; |
| 128 |
interrupts = <57>; |
| 129 |
}; |
| 130 |
|
| 131 |
mcspi1: spi@48098000 { |
| 132 |
compatible = "ti,omap2-mcspi"; |
| 133 |
ti,hwmods = "mcspi1"; |
| 134 |
reg = <0x48098000 0x100>; |
| 135 |
interrupts = <65>; |
| 136 |
dmas = <&sdma 35 &sdma 36 &sdma 37 &sdma 38 |
| 137 |
&sdma 39 &sdma 40 &sdma 41 &sdma 42>; |
| 138 |
dma-names = "tx0", "rx0", "tx1", "rx1", |
| 139 |
"tx2", "rx2", "tx3", "rx3"; |
| 140 |
}; |
| 141 |
|
| 142 |
mcspi2: spi@4809a000 { |
| 143 |
compatible = "ti,omap2-mcspi"; |
| 144 |
ti,hwmods = "mcspi2"; |
| 145 |
reg = <0x4809a000 0x100>; |
| 146 |
interrupts = <66>; |
| 147 |
dmas = <&sdma 43 &sdma 44 &sdma 45 &sdma 46>; |
| 148 |
dma-names = "tx0", "rx0", "tx1", "rx1"; |
| 149 |
}; |
| 150 |
|
| 151 |
rng: rng@480a0000 { |
| 152 |
compatible = "ti,omap2-rng"; |
| 153 |
ti,hwmods = "rng"; |
| 154 |
reg = <0x480a0000 0x50>; |
| 155 |
interrupts = <52>; |
| 156 |
}; |
| 157 |
|
| 158 |
sham: sham@480a4000 { |
| 159 |
compatible = "ti,omap2-sham"; |
| 160 |
ti,hwmods = "sham"; |
| 161 |
reg = <0x480a4000 0x64>; |
| 162 |
interrupts = <51>; |
| 163 |
dmas = <&sdma 13>; |
| 164 |
dma-names = "rx"; |
| 165 |
}; |
| 166 |
|
| 167 |
uart1: serial@4806a000 { |
| 168 |
compatible = "ti,omap2-uart"; |
| 169 |
ti,hwmods = "uart1"; |
| 170 |
reg = <0x4806a000 0x2000>; |
| 171 |
interrupts = <72>; |
| 172 |
dmas = <&sdma 49 &sdma 50>; |
| 173 |
dma-names = "tx", "rx"; |
| 174 |
clock-frequency = <48000000>; |
| 175 |
}; |
| 176 |
|
| 177 |
uart2: serial@4806c000 { |
| 178 |
compatible = "ti,omap2-uart"; |
| 179 |
ti,hwmods = "uart2"; |
| 180 |
reg = <0x4806c000 0x400>; |
| 181 |
interrupts = <73>; |
| 182 |
dmas = <&sdma 51 &sdma 52>; |
| 183 |
dma-names = "tx", "rx"; |
| 184 |
clock-frequency = <48000000>; |
| 185 |
}; |
| 186 |
|
| 187 |
uart3: serial@4806e000 { |
| 188 |
compatible = "ti,omap2-uart"; |
| 189 |
ti,hwmods = "uart3"; |
| 190 |
reg = <0x4806e000 0x400>; |
| 191 |
interrupts = <74>; |
| 192 |
dmas = <&sdma 53 &sdma 54>; |
| 193 |
dma-names = "tx", "rx"; |
| 194 |
clock-frequency = <48000000>; |
| 195 |
}; |
| 196 |
|
| 197 |
timer2_target: target-module@4802a000 { |
| 198 |
compatible = "ti,sysc-omap2-timer", "ti,sysc"; |
| 199 |
reg = <0x4802a000 0x4>, |
| 200 |
<0x4802a010 0x4>, |
| 201 |
<0x4802a014 0x4>; |
| 202 |
reg-names = "rev", "sysc", "syss"; |
| 203 |
ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY | |
| 204 |
SYSC_OMAP2_EMUFREE | |
| 205 |
SYSC_OMAP2_ENAWAKEUP | |
| 206 |
SYSC_OMAP2_SOFTRESET | |
| 207 |
SYSC_OMAP2_AUTOIDLE)>; |
| 208 |
ti,sysc-sidle = <SYSC_IDLE_FORCE>, |
| 209 |
<SYSC_IDLE_NO>, |
| 210 |
<SYSC_IDLE_SMART>; |
| 211 |
ti,syss-mask = <1>; |
| 212 |
clocks = <&gpt2_fck>, <&gpt2_ick>; |
| 213 |
clock-names = "fck", "ick"; |
| 214 |
#address-cells = <1>; |
| 215 |
#size-cells = <1>; |
| 216 |
ranges = <0x0 0x4802a000 0x1000>; |
| 217 |
|
| 218 |
timer2: timer@0 { |
| 219 |
compatible = "ti,omap2420-timer"; |
| 220 |
reg = <0 0x400>; |
| 221 |
interrupts = <38>; |
| 222 |
}; |
| 223 |
}; |
| 224 |
|
| 225 |
timer3: timer@48078000 { |
| 226 |
compatible = "ti,omap2420-timer"; |
| 227 |
reg = <0x48078000 0x400>; |
| 228 |
interrupts = <39>; |
| 229 |
ti,hwmods = "timer3"; |
| 230 |
}; |
| 231 |
|
| 232 |
timer4: timer@4807a000 { |
| 233 |
compatible = "ti,omap2420-timer"; |
| 234 |
reg = <0x4807a000 0x400>; |
| 235 |
interrupts = <40>; |
| 236 |
ti,hwmods = "timer4"; |
| 237 |
}; |
| 238 |
|
| 239 |
timer5: timer@4807c000 { |
| 240 |
compatible = "ti,omap2420-timer"; |
| 241 |
reg = <0x4807c000 0x400>; |
| 242 |
interrupts = <41>; |
| 243 |
ti,hwmods = "timer5"; |
| 244 |
ti,timer-dsp; |
| 245 |
}; |
| 246 |
|
| 247 |
timer6: timer@4807e000 { |
| 248 |
compatible = "ti,omap2420-timer"; |
| 249 |
reg = <0x4807e000 0x400>; |
| 250 |
interrupts = <42>; |
| 251 |
ti,hwmods = "timer6"; |
| 252 |
ti,timer-dsp; |
| 253 |
}; |
| 254 |
|
| 255 |
timer7: timer@48080000 { |
| 256 |
compatible = "ti,omap2420-timer"; |
| 257 |
reg = <0x48080000 0x400>; |
| 258 |
interrupts = <43>; |
| 259 |
ti,hwmods = "timer7"; |
| 260 |
ti,timer-dsp; |
| 261 |
}; |
| 262 |
|
| 263 |
timer8: timer@48082000 { |
| 264 |
compatible = "ti,omap2420-timer"; |
| 265 |
reg = <0x48082000 0x400>; |
| 266 |
interrupts = <44>; |
| 267 |
ti,hwmods = "timer8"; |
| 268 |
ti,timer-dsp; |
| 269 |
}; |
| 270 |
|
| 271 |
timer9: timer@48084000 { |
| 272 |
compatible = "ti,omap2420-timer"; |
| 273 |
reg = <0x48084000 0x400>; |
| 274 |
interrupts = <45>; |
| 275 |
ti,hwmods = "timer9"; |
| 276 |
ti,timer-pwm; |
| 277 |
}; |
| 278 |
|
| 279 |
timer10: timer@48086000 { |
| 280 |
compatible = "ti,omap2420-timer"; |
| 281 |
reg = <0x48086000 0x400>; |
| 282 |
interrupts = <46>; |
| 283 |
ti,hwmods = "timer10"; |
| 284 |
ti,timer-pwm; |
| 285 |
}; |
| 286 |
|
| 287 |
timer11: timer@48088000 { |
| 288 |
compatible = "ti,omap2420-timer"; |
| 289 |
reg = <0x48088000 0x400>; |
| 290 |
interrupts = <47>; |
| 291 |
ti,hwmods = "timer11"; |
| 292 |
ti,timer-pwm; |
| 293 |
}; |
| 294 |
|
| 295 |
timer12: timer@4808a000 { |
| 296 |
compatible = "ti,omap2420-timer"; |
| 297 |
reg = <0x4808a000 0x400>; |
| 298 |
interrupts = <48>; |
| 299 |
ti,hwmods = "timer12"; |
| 300 |
ti,timer-pwm; |
| 301 |
}; |
| 302 |
|
| 303 |
dss: dss@48050000 { |
| 304 |
compatible = "ti,omap2-dss"; |
| 305 |
reg = <0x48050000 0x400>; |
| 306 |
status = "disabled"; |
| 307 |
ti,hwmods = "dss_core"; |
| 308 |
#address-cells = <1>; |
| 309 |
#size-cells = <1>; |
| 310 |
ranges; |
| 311 |
|
| 312 |
dispc@48050400 { |
| 313 |
compatible = "ti,omap2-dispc"; |
| 314 |
reg = <0x48050400 0x400>; |
| 315 |
interrupts = <25>; |
| 316 |
ti,hwmods = "dss_dispc"; |
| 317 |
}; |
| 318 |
|
| 319 |
rfbi: encoder@48050800 { |
| 320 |
compatible = "ti,omap2-rfbi"; |
| 321 |
reg = <0x48050800 0x400>; |
| 322 |
status = "disabled"; |
| 323 |
ti,hwmods = "dss_rfbi"; |
| 324 |
}; |
| 325 |
|
| 326 |
venc: encoder@48050c00 { |
| 327 |
compatible = "ti,omap2-venc"; |
| 328 |
reg = <0x48050c00 0x400>; |
| 329 |
status = "disabled"; |
| 330 |
ti,hwmods = "dss_venc"; |
| 331 |
}; |
| 332 |
}; |
| 333 |
}; |
| 334 |
}; |