| 1 |
// SPDX-License-Identifier: GPL-2.0-only |
| 2 |
/* |
| 3 |
* Copyright (C) 2014 Texas Instruments Incorporated - https://www.ti.com/ |
| 4 |
*/ |
| 5 |
|
| 6 |
/* AM437x SK EVM */ |
| 7 |
|
| 8 |
/dts-v1/; |
| 9 |
|
| 10 |
#include "am4372.dtsi" |
| 11 |
#include <dt-bindings/pinctrl/am43xx.h> |
| 12 |
#include <dt-bindings/pwm/pwm.h> |
| 13 |
#include <dt-bindings/gpio/gpio.h> |
| 14 |
#include <dt-bindings/input/input.h> |
| 15 |
#include <dt-bindings/interrupt-controller/irq.h> |
| 16 |
|
| 17 |
/ { |
| 18 |
model = "TI AM437x SK EVM"; |
| 19 |
compatible = "ti,am437x-sk-evm","ti,am4372","ti,am43"; |
| 20 |
|
| 21 |
aliases { |
| 22 |
display0 = &lcd0; |
| 23 |
}; |
| 24 |
|
| 25 |
chosen { |
| 26 |
stdout-path = &uart0; |
| 27 |
}; |
| 28 |
|
| 29 |
/* fixed 32k external oscillator clock */ |
| 30 |
clk_32k_rtc: clk_32k_rtc { |
| 31 |
#clock-cells = <0>; |
| 32 |
compatible = "fixed-clock"; |
| 33 |
clock-frequency = <32768>; |
| 34 |
}; |
| 35 |
|
| 36 |
lcd_bl: backlight { |
| 37 |
compatible = "pwm-backlight"; |
| 38 |
pwms = <&ecap0 0 50000 PWM_POLARITY_INVERTED>; |
| 39 |
brightness-levels = <0 51 53 56 62 75 101 152 255>; |
| 40 |
default-brightness-level = <8>; |
| 41 |
}; |
| 42 |
|
| 43 |
sound { |
| 44 |
compatible = "simple-audio-card"; |
| 45 |
simple-audio-card,name = "AM437x-SK-EVM"; |
| 46 |
simple-audio-card,widgets = |
| 47 |
"Headphone", "Headphone Jack", |
| 48 |
"Line", "Line In"; |
| 49 |
simple-audio-card,routing = |
| 50 |
"Headphone Jack", "HPLOUT", |
| 51 |
"Headphone Jack", "HPROUT", |
| 52 |
"LINE1L", "Line In", |
| 53 |
"LINE1R", "Line In"; |
| 54 |
simple-audio-card,format = "dsp_b"; |
| 55 |
simple-audio-card,bitclock-master = <&sound_master>; |
| 56 |
simple-audio-card,frame-master = <&sound_master>; |
| 57 |
simple-audio-card,bitclock-inversion; |
| 58 |
|
| 59 |
simple-audio-card,cpu { |
| 60 |
sound-dai = <&mcasp1>; |
| 61 |
}; |
| 62 |
|
| 63 |
sound_master: simple-audio-card,codec { |
| 64 |
sound-dai = <&tlv320aic3106>; |
| 65 |
system-clock-frequency = <24000000>; |
| 66 |
}; |
| 67 |
}; |
| 68 |
|
| 69 |
matrix_keypad: matrix_keypad0 { |
| 70 |
compatible = "gpio-matrix-keypad"; |
| 71 |
|
| 72 |
pinctrl-names = "default"; |
| 73 |
pinctrl-0 = <&matrix_keypad_pins>; |
| 74 |
|
| 75 |
debounce-delay-ms = <5>; |
| 76 |
col-scan-delay-us = <5>; |
| 77 |
|
| 78 |
row-gpios = <&gpio5 5 GPIO_ACTIVE_HIGH /* Bank5, pin5 */ |
| 79 |
&gpio5 6 GPIO_ACTIVE_HIGH>; /* Bank5, pin6 */ |
| 80 |
|
| 81 |
col-gpios = <&gpio5 13 GPIO_ACTIVE_HIGH /* Bank5, pin13 */ |
| 82 |
&gpio5 4 GPIO_ACTIVE_HIGH>; /* Bank5, pin4 */ |
| 83 |
|
| 84 |
linux,keymap = < |
| 85 |
MATRIX_KEY(0, 0, KEY_DOWN) |
| 86 |
MATRIX_KEY(0, 1, KEY_RIGHT) |
| 87 |
MATRIX_KEY(1, 0, KEY_LEFT) |
| 88 |
MATRIX_KEY(1, 1, KEY_UP) |
| 89 |
>; |
| 90 |
}; |
| 91 |
|
| 92 |
leds { |
| 93 |
compatible = "gpio-leds"; |
| 94 |
|
| 95 |
pinctrl-names = "default"; |
| 96 |
pinctrl-0 = <&leds_pins>; |
| 97 |
|
| 98 |
led0 { |
| 99 |
label = "am437x-sk:red:heartbeat"; |
| 100 |
gpios = <&gpio5 0 GPIO_ACTIVE_HIGH>; /* Bank 5, pin 0 */ |
| 101 |
linux,default-trigger = "heartbeat"; |
| 102 |
default-state = "off"; |
| 103 |
}; |
| 104 |
|
| 105 |
led1 { |
| 106 |
label = "am437x-sk:green:mmc1"; |
| 107 |
gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>; /* Bank 5, pin 1 */ |
| 108 |
linux,default-trigger = "mmc0"; |
| 109 |
default-state = "off"; |
| 110 |
}; |
| 111 |
|
| 112 |
led2 { |
| 113 |
label = "am437x-sk:blue:cpu0"; |
| 114 |
gpios = <&gpio5 2 GPIO_ACTIVE_HIGH>; /* Bank 5, pin 2 */ |
| 115 |
linux,default-trigger = "cpu0"; |
| 116 |
default-state = "off"; |
| 117 |
}; |
| 118 |
|
| 119 |
led3 { |
| 120 |
label = "am437x-sk:blue:usr3"; |
| 121 |
gpios = <&gpio5 3 GPIO_ACTIVE_HIGH>; /* Bank 5, pin 3 */ |
| 122 |
default-state = "off"; |
| 123 |
}; |
| 124 |
}; |
| 125 |
|
| 126 |
lcd0: display { |
| 127 |
compatible = "newhaven,nhd-4.3-480272ef-atxl", "panel-dpi"; |
| 128 |
label = "lcd"; |
| 129 |
|
| 130 |
pinctrl-names = "default"; |
| 131 |
pinctrl-0 = <&lcd_pins>; |
| 132 |
|
| 133 |
backlight = <&lcd_bl>; |
| 134 |
|
| 135 |
enable-gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>; |
| 136 |
|
| 137 |
port { |
| 138 |
lcd_in: endpoint { |
| 139 |
remote-endpoint = <&dpi_out>; |
| 140 |
}; |
| 141 |
}; |
| 142 |
}; |
| 143 |
|
| 144 |
vmmcwl_fixed: fixedregulator-mmcwl { |
| 145 |
/* |
| 146 |
* WL_EN is not SDIO standard compliant. It is an out of band |
| 147 |
* signal and hard to be dealt with in a standard way by the |
| 148 |
* SDIO core driver. |
| 149 |
* So modelling the WL_EN line as a regulator was a natural |
| 150 |
* choice as the MMC core already deals with MMC supplies. |
| 151 |
*/ |
| 152 |
compatible = "regulator-fixed"; |
| 153 |
regulator-name = "vmmcwl_fixed"; |
| 154 |
regulator-min-microvolt = <1800000>; |
| 155 |
regulator-max-microvolt = <1800000>; |
| 156 |
gpio = <&gpio4 8 GPIO_ACTIVE_HIGH>; |
| 157 |
enable-active-high; |
| 158 |
}; |
| 159 |
}; |
| 160 |
|
| 161 |
&am43xx_pinmux { |
| 162 |
matrix_keypad_pins: matrix-keypad-pins { |
| 163 |
pinctrl-single,pins = < |
| 164 |
AM4372_IOPAD(0xa4c, PIN_OUTPUT | MUX_MODE7) /* gpio5_13.gpio5_13 */ |
| 165 |
AM4372_IOPAD(0xa50, PIN_OUTPUT | MUX_MODE7) /* spi4_sclk.gpio5_4 */ |
| 166 |
AM4372_IOPAD(0xa54, PIN_INPUT | MUX_MODE7) /* spi4_d0.gpio5_5 */ |
| 167 |
AM4372_IOPAD(0xa58, PIN_INPUT | MUX_MODE7) /* spi4_d1.gpio5_5 */ |
| 168 |
>; |
| 169 |
}; |
| 170 |
|
| 171 |
leds_pins: leds-pins { |
| 172 |
pinctrl-single,pins = < |
| 173 |
AM4372_IOPAD(0xa28, PIN_OUTPUT | MUX_MODE7) /* uart3_rxd.gpio5_2 */ |
| 174 |
AM4372_IOPAD(0xa2c, PIN_OUTPUT | MUX_MODE7) /* uart3_txd.gpio5_3 */ |
| 175 |
AM4372_IOPAD(0xa30, PIN_OUTPUT | MUX_MODE7) /* uart3_ctsn.gpio5_0 */ |
| 176 |
AM4372_IOPAD(0xa34, PIN_OUTPUT | MUX_MODE7) /* uart3_rtsn.gpio5_1 */ |
| 177 |
>; |
| 178 |
}; |
| 179 |
|
| 180 |
i2c0_pins: i2c0-pins { |
| 181 |
pinctrl-single,pins = < |
| 182 |
AM4372_IOPAD(0x988, PIN_INPUT | SLEWCTRL_FAST | MUX_MODE0) /* i2c0_sda.i2c0_sda */ |
| 183 |
AM4372_IOPAD(0x98c, PIN_INPUT | SLEWCTRL_FAST | MUX_MODE0) /* i2c0_scl.i2c0_scl */ |
| 184 |
>; |
| 185 |
}; |
| 186 |
|
| 187 |
i2c1_pins: i2c1-pins { |
| 188 |
pinctrl-single,pins = < |
| 189 |
AM4372_IOPAD(0x95c, PIN_INPUT | SLEWCTRL_FAST | MUX_MODE2) /* spi0_cs0.i2c1_scl */ |
| 190 |
AM4372_IOPAD(0x958, PIN_INPUT | SLEWCTRL_FAST | MUX_MODE2) /* spi0_d1.i2c1_sda */ |
| 191 |
>; |
| 192 |
}; |
| 193 |
|
| 194 |
mmc1_pins: mmc1-pins { |
| 195 |
pinctrl-single,pins = < |
| 196 |
AM4372_IOPAD(0x8f0, PIN_INPUT | MUX_MODE0) /* mmc0_dat3.mmc0_dat3 */ |
| 197 |
AM4372_IOPAD(0x8f4, PIN_INPUT | MUX_MODE0) /* mmc0_dat2.mmc0_dat2 */ |
| 198 |
AM4372_IOPAD(0x8f8, PIN_INPUT | MUX_MODE0) /* mmc0_dat1.mmc0_dat1 */ |
| 199 |
AM4372_IOPAD(0x8fc, PIN_INPUT | MUX_MODE0) /* mmc0_dat0.mmc0_dat0 */ |
| 200 |
AM4372_IOPAD(0x900, PIN_INPUT | MUX_MODE0) /* mmc0_clk.mmc0_clk */ |
| 201 |
AM4372_IOPAD(0x904, PIN_INPUT | MUX_MODE0) /* mmc0_cmd.mmc0_cmd */ |
| 202 |
AM4372_IOPAD(0x960, PIN_INPUT | MUX_MODE7) /* spi0_cs1.gpio0_6 */ |
| 203 |
>; |
| 204 |
}; |
| 205 |
|
| 206 |
ecap0_pins: backlight-pins { |
| 207 |
pinctrl-single,pins = < |
| 208 |
AM4372_IOPAD(0x964, PIN_OUTPUT | MUX_MODE0) /* eCAP0_in_PWM0_out.eCAP0_in_PWM0_out */ |
| 209 |
>; |
| 210 |
}; |
| 211 |
|
| 212 |
edt_ft5306_ts_pins: edt-ft5306-ts-pins { |
| 213 |
pinctrl-single,pins = < |
| 214 |
AM4372_IOPAD(0x874, PIN_INPUT | MUX_MODE7) /* gpmc_wpn.gpio0_31 */ |
| 215 |
AM4372_IOPAD(0x878, PIN_OUTPUT | MUX_MODE7) /* gpmc_be1n.gpio1_28 */ |
| 216 |
>; |
| 217 |
}; |
| 218 |
|
| 219 |
vpfe0_pins_default: vpfe0-default-pins { |
| 220 |
pinctrl-single,pins = < |
| 221 |
AM4372_IOPAD(0x9b0, PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_hd mode 0*/ |
| 222 |
AM4372_IOPAD(0x9b4, PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_vd mode 0*/ |
| 223 |
AM4372_IOPAD(0x9b8, PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_field mode 0*/ |
| 224 |
AM4372_IOPAD(0x9bc, PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_wen mode 0*/ |
| 225 |
AM4372_IOPAD(0x9c0, PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_pclk mode 0*/ |
| 226 |
AM4372_IOPAD(0x9c4, PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data8 mode 0*/ |
| 227 |
AM4372_IOPAD(0x9c8, PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data9 mode 0*/ |
| 228 |
AM4372_IOPAD(0xa08, PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data0 mode 0*/ |
| 229 |
AM4372_IOPAD(0xa0c, PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data1 mode 0*/ |
| 230 |
AM4372_IOPAD(0xa10, PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data2 mode 0*/ |
| 231 |
AM4372_IOPAD(0xa14, PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data3 mode 0*/ |
| 232 |
AM4372_IOPAD(0xa18, PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data4 mode 0*/ |
| 233 |
AM4372_IOPAD(0xa1c, PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data5 mode 0*/ |
| 234 |
AM4372_IOPAD(0xa20, PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data6 mode 0*/ |
| 235 |
AM4372_IOPAD(0xa24, PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data7 mode 0*/ |
| 236 |
>; |
| 237 |
}; |
| 238 |
|
| 239 |
vpfe0_pins_sleep: vpfe0-sleep-pins { |
| 240 |
pinctrl-single,pins = < |
| 241 |
AM4372_IOPAD(0x9b0, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) |
| 242 |
AM4372_IOPAD(0x9b4, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) |
| 243 |
AM4372_IOPAD(0x9b8, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) |
| 244 |
AM4372_IOPAD(0x9bc, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) |
| 245 |
AM4372_IOPAD(0x9c0, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) |
| 246 |
AM4372_IOPAD(0x9c4, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) |
| 247 |
AM4372_IOPAD(0x9c8, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) |
| 248 |
AM4372_IOPAD(0xa08, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) |
| 249 |
AM4372_IOPAD(0xa0c, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) |
| 250 |
AM4372_IOPAD(0xa10, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) |
| 251 |
AM4372_IOPAD(0xa14, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) |
| 252 |
AM4372_IOPAD(0xa18, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) |
| 253 |
AM4372_IOPAD(0xa1c, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) |
| 254 |
AM4372_IOPAD(0xa20, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) |
| 255 |
AM4372_IOPAD(0xa24, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) |
| 256 |
>; |
| 257 |
}; |
| 258 |
|
| 259 |
clkout1_pin: clkout1-pins { |
| 260 |
pinctrl-single,pins = < |
| 261 |
0x270 (PIN_OUTPUT_PULLDOWN | MUX_MODE3) /* XDMA_EVENT_INTR0/CLKOUT1 */ |
| 262 |
>; |
| 263 |
}; |
| 264 |
|
| 265 |
cpsw_default: cpsw-default-pins { |
| 266 |
pinctrl-single,pins = < |
| 267 |
/* Slave 1 */ |
| 268 |
AM4372_IOPAD(0x92c, PIN_OUTPUT | MUX_MODE2) /* mii1_txclk.rmii1_tclk */ |
| 269 |
AM4372_IOPAD(0x914, PIN_OUTPUT | MUX_MODE2) /* mii1_txen.rgmii1_tctl */ |
| 270 |
AM4372_IOPAD(0x928, PIN_OUTPUT | MUX_MODE2) /* mii1_txd0.rgmii1_td0 */ |
| 271 |
AM4372_IOPAD(0x924, PIN_OUTPUT | MUX_MODE2) /* mii1_txd1.rgmii1_td1 */ |
| 272 |
AM4372_IOPAD(0x920, PIN_OUTPUT | MUX_MODE2) /* mii1_txd0.rgmii1_td2 */ |
| 273 |
AM4372_IOPAD(0x91c, PIN_OUTPUT | MUX_MODE2) /* mii1_txd1.rgmii1_td3 */ |
| 274 |
AM4372_IOPAD(0x930, PIN_INPUT | MUX_MODE2) /* mii1_rxclk.rmii1_rclk */ |
| 275 |
AM4372_IOPAD(0x918, PIN_INPUT | MUX_MODE2) /* mii1_rxdv.rgmii1_rctl */ |
| 276 |
AM4372_IOPAD(0x940, PIN_INPUT | MUX_MODE2) /* mii1_rxd0.rgmii1_rd0 */ |
| 277 |
AM4372_IOPAD(0x93c, PIN_INPUT | MUX_MODE2) /* mii1_rxd1.rgmii1_rd1 */ |
| 278 |
AM4372_IOPAD(0x938, PIN_INPUT | MUX_MODE2) /* mii1_rxd0.rgmii1_rd2 */ |
| 279 |
AM4372_IOPAD(0x934, PIN_INPUT | MUX_MODE2) /* mii1_rxd1.rgmii1_rd3 */ |
| 280 |
|
| 281 |
/* Slave 2 */ |
| 282 |
AM4372_IOPAD(0x858, PIN_OUTPUT | MUX_MODE2) /* gpmc_a6.rgmii2_tclk */ |
| 283 |
AM4372_IOPAD(0x840, PIN_OUTPUT | MUX_MODE2) /* gpmc_a0.rgmii2_tctl */ |
| 284 |
AM4372_IOPAD(0x854, PIN_OUTPUT | MUX_MODE2) /* gpmc_a5.rgmii2_td0 */ |
| 285 |
AM4372_IOPAD(0x850, PIN_OUTPUT | MUX_MODE2) /* gpmc_a4.rgmii2_td1 */ |
| 286 |
AM4372_IOPAD(0x84c, PIN_OUTPUT | MUX_MODE2) /* gpmc_a3.rgmii2_td2 */ |
| 287 |
AM4372_IOPAD(0x848, PIN_OUTPUT | MUX_MODE2) /* gpmc_a2.rgmii2_td3 */ |
| 288 |
AM4372_IOPAD(0x85c, PIN_INPUT | MUX_MODE2) /* gpmc_a7.rgmii2_rclk */ |
| 289 |
AM4372_IOPAD(0x844, PIN_INPUT | MUX_MODE2) /* gpmc_a1.rgmii2_rtcl */ |
| 290 |
AM4372_IOPAD(0x86c, PIN_INPUT | MUX_MODE2) /* gpmc_a11.rgmii2_rd0 */ |
| 291 |
AM4372_IOPAD(0x868, PIN_INPUT | MUX_MODE2) /* gpmc_a10.rgmii2_rd1 */ |
| 292 |
AM4372_IOPAD(0x864, PIN_INPUT | MUX_MODE2) /* gpmc_a9.rgmii2_rd2 */ |
| 293 |
AM4372_IOPAD(0x860, PIN_INPUT | MUX_MODE2) /* gpmc_a8.rgmii2_rd3 */ |
| 294 |
>; |
| 295 |
}; |
| 296 |
|
| 297 |
cpsw_sleep: cpsw-sleep-pins { |
| 298 |
pinctrl-single,pins = < |
| 299 |
/* Slave 1 reset value */ |
| 300 |
AM4372_IOPAD(0x92c, PIN_INPUT_PULLDOWN | MUX_MODE7) |
| 301 |
AM4372_IOPAD(0x914, PIN_INPUT_PULLDOWN | MUX_MODE7) |
| 302 |
AM4372_IOPAD(0x928, PIN_INPUT_PULLDOWN | MUX_MODE7) |
| 303 |
AM4372_IOPAD(0x924, PIN_INPUT_PULLDOWN | MUX_MODE7) |
| 304 |
AM4372_IOPAD(0x920, PIN_INPUT_PULLDOWN | MUX_MODE7) |
| 305 |
AM4372_IOPAD(0x91c, PIN_INPUT_PULLDOWN | MUX_MODE7) |
| 306 |
AM4372_IOPAD(0x930, PIN_INPUT_PULLDOWN | MUX_MODE7) |
| 307 |
AM4372_IOPAD(0x918, PIN_INPUT_PULLDOWN | MUX_MODE7) |
| 308 |
AM4372_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE7) |
| 309 |
AM4372_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE7) |
| 310 |
AM4372_IOPAD(0x938, PIN_INPUT_PULLDOWN | MUX_MODE7) |
| 311 |
AM4372_IOPAD(0x934, PIN_INPUT_PULLDOWN | MUX_MODE7) |
| 312 |
|
| 313 |
/* Slave 2 reset value */ |
| 314 |
AM4372_IOPAD(0x858, PIN_INPUT_PULLDOWN | MUX_MODE7) |
| 315 |
AM4372_IOPAD(0x840, PIN_INPUT_PULLDOWN | MUX_MODE7) |
| 316 |
AM4372_IOPAD(0x854, PIN_INPUT_PULLDOWN | MUX_MODE7) |
| 317 |
AM4372_IOPAD(0x850, PIN_INPUT_PULLDOWN | MUX_MODE7) |
| 318 |
AM4372_IOPAD(0x84c, PIN_INPUT_PULLDOWN | MUX_MODE7) |
| 319 |
AM4372_IOPAD(0x848, PIN_INPUT_PULLDOWN | MUX_MODE7) |
| 320 |
AM4372_IOPAD(0x85c, PIN_INPUT_PULLDOWN | MUX_MODE7) |
| 321 |
AM4372_IOPAD(0x844, PIN_INPUT_PULLDOWN | MUX_MODE7) |
| 322 |
AM4372_IOPAD(0x86c, PIN_INPUT_PULLDOWN | MUX_MODE7) |
| 323 |
AM4372_IOPAD(0x868, PIN_INPUT_PULLDOWN | MUX_MODE7) |
| 324 |
AM4372_IOPAD(0x864, PIN_INPUT_PULLDOWN | MUX_MODE7) |
| 325 |
AM4372_IOPAD(0x860, PIN_INPUT_PULLDOWN | MUX_MODE7) |
| 326 |
>; |
| 327 |
}; |
| 328 |
|
| 329 |
davinci_mdio_default: davinci-mdio-default-pins { |
| 330 |
pinctrl-single,pins = < |
| 331 |
/* MDIO */ |
| 332 |
AM4372_IOPAD(0x948, PIN_INPUT | SLEWCTRL_FAST | MUX_MODE0) /* mdio_data.mdio_data */ |
| 333 |
AM4372_IOPAD(0x94c, PIN_OUTPUT | MUX_MODE0) /* mdio_clk.mdio_clk */ |
| 334 |
>; |
| 335 |
}; |
| 336 |
|
| 337 |
davinci_mdio_sleep: davinci-mdio-sleep-pins { |
| 338 |
pinctrl-single,pins = < |
| 339 |
/* MDIO reset value */ |
| 340 |
AM4372_IOPAD(0x948, PIN_INPUT_PULLDOWN | MUX_MODE7) |
| 341 |
AM4372_IOPAD(0x94c, PIN_INPUT_PULLDOWN | MUX_MODE7) |
| 342 |
>; |
| 343 |
}; |
| 344 |
|
| 345 |
dss_pins: dss-pins { |
| 346 |
pinctrl-single,pins = < |
| 347 |
AM4372_IOPAD(0x820, PIN_OUTPUT | MUX_MODE1) /* gpmc ad 8 -> DSS DATA 23 */ |
| 348 |
AM4372_IOPAD(0x824, PIN_OUTPUT | MUX_MODE1) |
| 349 |
AM4372_IOPAD(0x828, PIN_OUTPUT | MUX_MODE1) |
| 350 |
AM4372_IOPAD(0x82c, PIN_OUTPUT | MUX_MODE1) |
| 351 |
AM4372_IOPAD(0x830, PIN_OUTPUT | MUX_MODE1) |
| 352 |
AM4372_IOPAD(0x834, PIN_OUTPUT | MUX_MODE1) |
| 353 |
AM4372_IOPAD(0x838, PIN_OUTPUT | MUX_MODE1) |
| 354 |
AM4372_IOPAD(0x83c, PIN_OUTPUT | MUX_MODE1) /* gpmc ad 15 -> DSS DATA 16 */ |
| 355 |
AM4372_IOPAD(0x8a0, PIN_OUTPUT | MUX_MODE0) /* DSS DATA 0 */ |
| 356 |
AM4372_IOPAD(0x8a4, PIN_OUTPUT | MUX_MODE0) |
| 357 |
AM4372_IOPAD(0x8a8, PIN_OUTPUT | MUX_MODE0) |
| 358 |
AM4372_IOPAD(0x8ac, PIN_OUTPUT | MUX_MODE0) |
| 359 |
AM4372_IOPAD(0x8b0, PIN_OUTPUT | MUX_MODE0) |
| 360 |
AM4372_IOPAD(0x8b4, PIN_OUTPUT | MUX_MODE0) |
| 361 |
AM4372_IOPAD(0x8b8, PIN_OUTPUT | MUX_MODE0) |
| 362 |
AM4372_IOPAD(0x8bc, PIN_OUTPUT | MUX_MODE0) |
| 363 |
AM4372_IOPAD(0x8c0, PIN_OUTPUT | MUX_MODE0) |
| 364 |
AM4372_IOPAD(0x8c4, PIN_OUTPUT | MUX_MODE0) |
| 365 |
AM4372_IOPAD(0x8c8, PIN_OUTPUT | MUX_MODE0) |
| 366 |
AM4372_IOPAD(0x8cc, PIN_OUTPUT | MUX_MODE0) |
| 367 |
AM4372_IOPAD(0x8d0, PIN_OUTPUT | MUX_MODE0) |
| 368 |
AM4372_IOPAD(0x8d4, PIN_OUTPUT | MUX_MODE0) |
| 369 |
AM4372_IOPAD(0x8d8, PIN_OUTPUT | MUX_MODE0) |
| 370 |
AM4372_IOPAD(0x8dc, PIN_OUTPUT | MUX_MODE0) /* DSS DATA 15 */ |
| 371 |
AM4372_IOPAD(0x8e0, PIN_OUTPUT | MUX_MODE0) /* DSS VSYNC */ |
| 372 |
AM4372_IOPAD(0x8e4, PIN_OUTPUT | MUX_MODE0) /* DSS HSYNC */ |
| 373 |
AM4372_IOPAD(0x8e8, PIN_OUTPUT | MUX_MODE0) /* DSS PCLK */ |
| 374 |
AM4372_IOPAD(0x8ec, PIN_OUTPUT | MUX_MODE0) /* DSS AC BIAS EN */ |
| 375 |
|
| 376 |
>; |
| 377 |
}; |
| 378 |
|
| 379 |
qspi_pins: qspi-pins { |
| 380 |
pinctrl-single,pins = < |
| 381 |
AM4372_IOPAD(0x87c, PIN_OUTPUT | MUX_MODE3) /* gpmc_csn0.qspi_csn */ |
| 382 |
AM4372_IOPAD(0x888, PIN_OUTPUT | MUX_MODE2) /* gpmc_csn3.qspi_clk */ |
| 383 |
AM4372_IOPAD(0x890, PIN_INPUT | MUX_MODE3) /* gpmc_advn_ale.qspi_d0 */ |
| 384 |
AM4372_IOPAD(0x894, PIN_INPUT | MUX_MODE3) /* gpmc_oen_ren.qspi_d1 */ |
| 385 |
AM4372_IOPAD(0x898, PIN_INPUT | MUX_MODE3) /* gpmc_wen.qspi_d2 */ |
| 386 |
AM4372_IOPAD(0x89c, PIN_INPUT | MUX_MODE3) /* gpmc_be0n_cle.qspi_d3 */ |
| 387 |
>; |
| 388 |
}; |
| 389 |
|
| 390 |
mcasp1_pins: mcasp1-pins { |
| 391 |
pinctrl-single,pins = < |
| 392 |
AM4372_IOPAD(0x90c, PIN_INPUT_PULLDOWN | MUX_MODE4) /* mii1_crs.mcasp1_aclkx */ |
| 393 |
AM4372_IOPAD(0x910, PIN_INPUT_PULLDOWN | MUX_MODE4) /* mii1_rxerr.mcasp1_fsx */ |
| 394 |
AM4372_IOPAD(0x908, PIN_OUTPUT_PULLDOWN | MUX_MODE4) /* mii1_col.mcasp1_axr2 */ |
| 395 |
AM4372_IOPAD(0x944, PIN_INPUT_PULLDOWN | MUX_MODE4) /* rmii1_ref_clk.mcasp1_axr3 */ |
| 396 |
>; |
| 397 |
}; |
| 398 |
|
| 399 |
mcasp1_pins_sleep: mcasp1-sleep-pins { |
| 400 |
pinctrl-single,pins = < |
| 401 |
AM4372_IOPAD(0x90c, PIN_INPUT_PULLDOWN | MUX_MODE7) |
| 402 |
AM4372_IOPAD(0x910, PIN_INPUT_PULLDOWN | MUX_MODE7) |
| 403 |
AM4372_IOPAD(0x908, PIN_INPUT_PULLDOWN | MUX_MODE7) |
| 404 |
AM4372_IOPAD(0x944, PIN_INPUT_PULLDOWN | MUX_MODE7) |
| 405 |
>; |
| 406 |
}; |
| 407 |
|
| 408 |
lcd_pins: lcd-pins { |
| 409 |
pinctrl-single,pins = < |
| 410 |
AM4372_IOPAD(0x81c, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpcm_ad7.gpio1_7 */ |
| 411 |
>; |
| 412 |
}; |
| 413 |
|
| 414 |
usb1_pins: usb1-pins { |
| 415 |
pinctrl-single,pins = < |
| 416 |
AM4372_IOPAD(0xac0, PIN_OUTPUT | MUX_MODE0) /* usb0_drvvbus.usb0_drvvbus */ |
| 417 |
>; |
| 418 |
}; |
| 419 |
|
| 420 |
usb2_pins: usb2-pins { |
| 421 |
pinctrl-single,pins = < |
| 422 |
AM4372_IOPAD(0xac4, PIN_OUTPUT | MUX_MODE0) /* usb0_drvvbus.usb0_drvvbus */ |
| 423 |
>; |
| 424 |
}; |
| 425 |
|
| 426 |
mmc3_pins_default: mmc3-default-pins { |
| 427 |
pinctrl-single,pins = < |
| 428 |
AM4372_IOPAD(0x9f0, PIN_INPUT_PULLUP | MUX_MODE3) /* (AD21) cam1_data2.mmc2_clk */ |
| 429 |
AM4372_IOPAD(0x9f4, PIN_INPUT_PULLUP | MUX_MODE3) /* (AE22) cam1_data3.mmc2_cmd */ |
| 430 |
AM4372_IOPAD(0x9f8, PIN_INPUT_PULLUP | MUX_MODE3) /* (AD22) cam1_data4.mmc2_dat0 */ |
| 431 |
AM4372_IOPAD(0x9fc, PIN_INPUT_PULLUP | MUX_MODE3) /* (AE23) cam1_data5.mmc2_dat1 */ |
| 432 |
AM4372_IOPAD(0xa00, PIN_INPUT_PULLUP | MUX_MODE3) /* (AD23) cam1_data6.mmc2_dat2 */ |
| 433 |
AM4372_IOPAD(0xa04, PIN_INPUT_PULLUP | MUX_MODE3) /* (AE24) cam1_data7.mmc2_dat3 */ |
| 434 |
>; |
| 435 |
}; |
| 436 |
|
| 437 |
mmc3_pins_sleep: mmc3-sleep-pins { |
| 438 |
pinctrl-single,pins = < |
| 439 |
AM4372_IOPAD(0x9f0, PIN_INPUT_PULLDOWN | MUX_MODE7) /* (AD21) cam1_data2.mmc2_clk */ |
| 440 |
AM4372_IOPAD(0x9f4, PIN_INPUT_PULLDOWN | MUX_MODE7) /* (AE22) cam1_data3.mmc2_cmd */ |
| 441 |
AM4372_IOPAD(0x9f8, PIN_INPUT_PULLDOWN | MUX_MODE7) /* (AD22) cam1_data4.mmc2_dat0 */ |
| 442 |
AM4372_IOPAD(0x9fc, PIN_INPUT_PULLDOWN | MUX_MODE7) /* (AE23) cam1_data5.mmc2_dat1 */ |
| 443 |
AM4372_IOPAD(0xa00, PIN_INPUT_PULLDOWN | MUX_MODE7) /* (AD23) cam1_data6.mmc2_dat2 */ |
| 444 |
AM4372_IOPAD(0xa04, PIN_INPUT_PULLDOWN | MUX_MODE7) /* (AE24) cam1_data7.mmc2_dat3 */ |
| 445 |
>; |
| 446 |
}; |
| 447 |
|
| 448 |
wlan_pins_default: wlan-default-pins { |
| 449 |
pinctrl-single,pins = < |
| 450 |
AM4372_IOPAD(0x9d0, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* cam1_data8.gpio4_8 WL_EN */ |
| 451 |
AM4372_IOPAD(0x9e4, PIN_INPUT | WAKEUP_ENABLE | MUX_MODE7) /* cam1_wen.gpio4_13 WL_IRQ */ |
| 452 |
>; |
| 453 |
}; |
| 454 |
|
| 455 |
wlan_pins_sleep: wlan-sleep-pins { |
| 456 |
pinctrl-single,pins = < |
| 457 |
AM4372_IOPAD(0x9d0, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* cam1_data8.gpio4_8 WL_EN */ |
| 458 |
AM4372_IOPAD(0x9e4, PIN_INPUT | WAKEUP_ENABLE | MUX_MODE7) /* cam1_wen.gpio4_13 WL_IRQ */ |
| 459 |
>; |
| 460 |
}; |
| 461 |
|
| 462 |
uart1_bt_pins_default: uart1-bt-default-pins { |
| 463 |
pinctrl-single,pins = < |
| 464 |
AM4372_IOPAD(0x980, PIN_INPUT | MUX_MODE0) /* uart1_rxd.uart1_rxd */ |
| 465 |
AM4372_IOPAD(0x984, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart1_txd.uart1_txd */ |
| 466 |
AM4372_IOPAD(0x978, PIN_INPUT_PULLUP | MUX_MODE0) /* uart1_ctsn.uart1_ctsn */ |
| 467 |
AM4372_IOPAD(0x97c, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart1_rtsn.uart1_rtsn */ |
| 468 |
AM4372_IOPAD(0x9cc, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* cam1_data9.gpio4_7 BT_EN */ |
| 469 |
>; |
| 470 |
}; |
| 471 |
|
| 472 |
uart1_bt_pins_sleep: uart1-bt-sleep-pins { |
| 473 |
pinctrl-single,pins = < |
| 474 |
AM4372_IOPAD(0x980, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* uart1_rxd.uart1_rxd */ |
| 475 |
AM4372_IOPAD(0x984, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* uart1_txd.uart1_txd */ |
| 476 |
AM4372_IOPAD(0x978, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* uart1_ctsn.uart1_ctsn */ |
| 477 |
AM4372_IOPAD(0x97c, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* uart1_rtsn.uart1_rtsn */ |
| 478 |
AM4372_IOPAD(0x9cc, PIN_OUTPUT_PULLUP | MUX_MODE7) /* cam1_data9.gpio4_7 BT_EN */ |
| 479 |
>; |
| 480 |
}; |
| 481 |
}; |
| 482 |
|
| 483 |
&i2c0 { |
| 484 |
status = "okay"; |
| 485 |
pinctrl-names = "default"; |
| 486 |
pinctrl-0 = <&i2c0_pins>; |
| 487 |
clock-frequency = <100000>; |
| 488 |
|
| 489 |
tps@24 { |
| 490 |
compatible = "ti,tps65218"; |
| 491 |
reg = <0x24>; |
| 492 |
interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; |
| 493 |
interrupt-controller; |
| 494 |
#interrupt-cells = <2>; |
| 495 |
|
| 496 |
dcdc1: regulator-dcdc1 { |
| 497 |
/* VDD_CORE limits min of OPP50 and max of OPP100 */ |
| 498 |
regulator-name = "vdd_core"; |
| 499 |
regulator-min-microvolt = <912000>; |
| 500 |
regulator-max-microvolt = <1144000>; |
| 501 |
regulator-boot-on; |
| 502 |
regulator-always-on; |
| 503 |
}; |
| 504 |
|
| 505 |
dcdc2: regulator-dcdc2 { |
| 506 |
/* VDD_MPU limits min of OPP50 and max of OPP_NITRO */ |
| 507 |
regulator-name = "vdd_mpu"; |
| 508 |
regulator-min-microvolt = <912000>; |
| 509 |
regulator-max-microvolt = <1378000>; |
| 510 |
regulator-boot-on; |
| 511 |
regulator-always-on; |
| 512 |
}; |
| 513 |
|
| 514 |
dcdc3: regulator-dcdc3 { |
| 515 |
regulator-name = "vdds_ddr"; |
| 516 |
regulator-boot-on; |
| 517 |
regulator-always-on; |
| 518 |
regulator-state-mem { |
| 519 |
regulator-on-in-suspend; |
| 520 |
}; |
| 521 |
regulator-state-disk { |
| 522 |
regulator-off-in-suspend; |
| 523 |
}; |
| 524 |
}; |
| 525 |
|
| 526 |
dcdc4: regulator-dcdc4 { |
| 527 |
regulator-name = "v3_3d"; |
| 528 |
regulator-min-microvolt = <3300000>; |
| 529 |
regulator-max-microvolt = <3300000>; |
| 530 |
regulator-boot-on; |
| 531 |
regulator-always-on; |
| 532 |
}; |
| 533 |
|
| 534 |
dcdc5: regulator-dcdc5 { |
| 535 |
compatible = "ti,tps65218-dcdc5"; |
| 536 |
regulator-name = "v1_0bat"; |
| 537 |
regulator-min-microvolt = <1000000>; |
| 538 |
regulator-max-microvolt = <1000000>; |
| 539 |
regulator-boot-on; |
| 540 |
regulator-always-on; |
| 541 |
regulator-state-mem { |
| 542 |
regulator-on-in-suspend; |
| 543 |
}; |
| 544 |
}; |
| 545 |
|
| 546 |
dcdc6: regulator-dcdc6 { |
| 547 |
compatible = "ti,tps65218-dcdc6"; |
| 548 |
regulator-name = "v1_8bat"; |
| 549 |
regulator-min-microvolt = <1800000>; |
| 550 |
regulator-max-microvolt = <1800000>; |
| 551 |
regulator-boot-on; |
| 552 |
regulator-always-on; |
| 553 |
regulator-state-mem { |
| 554 |
regulator-on-in-suspend; |
| 555 |
}; |
| 556 |
}; |
| 557 |
|
| 558 |
ldo1: regulator-ldo1 { |
| 559 |
regulator-name = "v1_8d"; |
| 560 |
regulator-min-microvolt = <1800000>; |
| 561 |
regulator-max-microvolt = <1800000>; |
| 562 |
regulator-boot-on; |
| 563 |
regulator-always-on; |
| 564 |
}; |
| 565 |
|
| 566 |
power-button { |
| 567 |
compatible = "ti,tps65218-pwrbutton"; |
| 568 |
status = "okay"; |
| 569 |
interrupts = <3 IRQ_TYPE_EDGE_BOTH>; |
| 570 |
}; |
| 571 |
}; |
| 572 |
|
| 573 |
eeprom@50 { |
| 574 |
compatible = "atmel,24c256"; |
| 575 |
pagesize = <64>; |
| 576 |
reg = <0x50>; |
| 577 |
}; |
| 578 |
}; |
| 579 |
|
| 580 |
&i2c1 { |
| 581 |
status = "okay"; |
| 582 |
pinctrl-names = "default"; |
| 583 |
pinctrl-0 = <&i2c1_pins>; |
| 584 |
clock-frequency = <400000>; |
| 585 |
|
| 586 |
ov2659@30 { |
| 587 |
compatible = "ovti,ov2659"; |
| 588 |
reg = <0x30>; |
| 589 |
pinctrl-names = "default"; |
| 590 |
pinctrl-0 = <&clkout1_pin>; |
| 591 |
|
| 592 |
clocks = <&clkout1_mux_ck>; |
| 593 |
clock-names = "xvclk"; |
| 594 |
assigned-clocks = <&clkout1_mux_ck>; |
| 595 |
assigned-clock-parents = <&clkout1_osc_div_ck>; |
| 596 |
|
| 597 |
port { |
| 598 |
ov2659_1: endpoint { |
| 599 |
remote-endpoint = <&vpfe0_ep>; |
| 600 |
link-frequencies = /bits/ 64 <70000000>; |
| 601 |
}; |
| 602 |
}; |
| 603 |
}; |
| 604 |
|
| 605 |
edt-ft5306@38 { |
| 606 |
status = "okay"; |
| 607 |
compatible = "edt,edt-ft5306", "edt,edt-ft5x06"; |
| 608 |
pinctrl-names = "default"; |
| 609 |
pinctrl-0 = <&edt_ft5306_ts_pins>; |
| 610 |
|
| 611 |
reg = <0x38>; |
| 612 |
interrupt-parent = <&gpio0>; |
| 613 |
interrupts = <31 IRQ_TYPE_EDGE_FALLING>; |
| 614 |
|
| 615 |
reset-gpios = <&gpio1 28 GPIO_ACTIVE_LOW>; |
| 616 |
|
| 617 |
touchscreen-size-x = <480>; |
| 618 |
touchscreen-size-y = <272>; |
| 619 |
|
| 620 |
wakeup-source; |
| 621 |
}; |
| 622 |
|
| 623 |
tlv320aic3106: tlv320aic3106@1b { |
| 624 |
#sound-dai-cells = <0>; |
| 625 |
compatible = "ti,tlv320aic3106"; |
| 626 |
reg = <0x1b>; |
| 627 |
status = "okay"; |
| 628 |
|
| 629 |
/* Regulators */ |
| 630 |
AVDD-supply = <&dcdc4>; |
| 631 |
IOVDD-supply = <&dcdc4>; |
| 632 |
DRVDD-supply = <&dcdc4>; |
| 633 |
DVDD-supply = <&ldo1>; |
| 634 |
}; |
| 635 |
|
| 636 |
lis331dlh@18 { |
| 637 |
compatible = "st,lis331dlh"; |
| 638 |
reg = <0x18>; |
| 639 |
status = "okay"; |
| 640 |
|
| 641 |
Vdd-supply = <&dcdc4>; |
| 642 |
Vdd_IO-supply = <&dcdc4>; |
| 643 |
interrupts-extended = <&gpio1 6 0>, <&gpio2 1 0>; |
| 644 |
}; |
| 645 |
}; |
| 646 |
|
| 647 |
&epwmss0 { |
| 648 |
status = "okay"; |
| 649 |
}; |
| 650 |
|
| 651 |
&ecap0 { |
| 652 |
status = "okay"; |
| 653 |
pinctrl-names = "default"; |
| 654 |
pinctrl-0 = <&ecap0_pins>; |
| 655 |
}; |
| 656 |
|
| 657 |
&gpio0 { |
| 658 |
status = "okay"; |
| 659 |
}; |
| 660 |
|
| 661 |
&gpio1 { |
| 662 |
status = "okay"; |
| 663 |
}; |
| 664 |
|
| 665 |
&gpio4 { |
| 666 |
status = "okay"; |
| 667 |
}; |
| 668 |
|
| 669 |
&gpio5 { |
| 670 |
status = "okay"; |
| 671 |
}; |
| 672 |
|
| 673 |
&mmc1 { |
| 674 |
status = "okay"; |
| 675 |
pinctrl-names = "default"; |
| 676 |
pinctrl-0 = <&mmc1_pins>; |
| 677 |
|
| 678 |
vmmc-supply = <&dcdc4>; |
| 679 |
bus-width = <4>; |
| 680 |
cd-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>; |
| 681 |
}; |
| 682 |
|
| 683 |
&uart1 { |
| 684 |
status = "okay"; |
| 685 |
pinctrl-names = "default", "sleep"; |
| 686 |
pinctrl-0 = <&uart1_bt_pins_default>; |
| 687 |
pinctrl-1 = <&uart1_bt_pins_sleep>; |
| 688 |
}; |
| 689 |
|
| 690 |
&mmc3 { |
| 691 |
status = "okay"; |
| 692 |
/* |
| 693 |
* these are on the crossbar and are outlined in the |
| 694 |
* xbar-event-map element |
| 695 |
*/ |
| 696 |
dmas = <&edma_xbar 30 0 1>, |
| 697 |
<&edma_xbar 31 0 2>; |
| 698 |
dma-names = "tx", "rx"; |
| 699 |
vmmc-supply = <&vmmcwl_fixed>; |
| 700 |
bus-width = <4>; |
| 701 |
pinctrl-names = "default", "sleep"; |
| 702 |
pinctrl-0 = <&mmc3_pins_default>; |
| 703 |
pinctrl-1 = <&mmc3_pins_sleep>; |
| 704 |
cap-power-off-card; |
| 705 |
keep-power-in-suspend; |
| 706 |
non-removable; |
| 707 |
|
| 708 |
#address-cells = <1>; |
| 709 |
#size-cells = <0>; |
| 710 |
wlcore: wlcore@2 { |
| 711 |
compatible = "ti,wl1835"; |
| 712 |
pinctrl-names = "default", "sleep"; |
| 713 |
pinctrl-0 = <&wlan_pins_default>; |
| 714 |
pinctrl-1 = <&wlan_pins_sleep>; |
| 715 |
reg = <2>; |
| 716 |
interrupt-parent = <&gpio4>; |
| 717 |
interrupts = <13 IRQ_TYPE_LEVEL_HIGH>; |
| 718 |
}; |
| 719 |
}; |
| 720 |
|
| 721 |
&usb2_phy1 { |
| 722 |
status = "okay"; |
| 723 |
}; |
| 724 |
|
| 725 |
&usb1 { |
| 726 |
dr_mode = "otg"; |
| 727 |
status = "okay"; |
| 728 |
pinctrl-names = "default"; |
| 729 |
pinctrl-0 = <&usb1_pins>; |
| 730 |
}; |
| 731 |
|
| 732 |
&usb2_phy2 { |
| 733 |
status = "okay"; |
| 734 |
}; |
| 735 |
|
| 736 |
&usb2 { |
| 737 |
dr_mode = "host"; |
| 738 |
status = "okay"; |
| 739 |
pinctrl-names = "default"; |
| 740 |
pinctrl-0 = <&usb2_pins>; |
| 741 |
}; |
| 742 |
|
| 743 |
&qspi { |
| 744 |
status = "okay"; |
| 745 |
pinctrl-names = "default"; |
| 746 |
pinctrl-0 = <&qspi_pins>; |
| 747 |
|
| 748 |
spi-max-frequency = <48000000>; |
| 749 |
flash@0 { |
| 750 |
compatible = "mx66l51235l"; |
| 751 |
spi-max-frequency = <48000000>; |
| 752 |
reg = <0>; |
| 753 |
spi-cpol; |
| 754 |
spi-cpha; |
| 755 |
spi-tx-bus-width = <1>; |
| 756 |
spi-rx-bus-width = <4>; |
| 757 |
#address-cells = <1>; |
| 758 |
#size-cells = <1>; |
| 759 |
|
| 760 |
/* MTD partition table. |
| 761 |
* The ROM checks the first 512KiB |
| 762 |
* for a valid file to boot(XIP). |
| 763 |
*/ |
| 764 |
partition@0 { |
| 765 |
label = "QSPI.U_BOOT"; |
| 766 |
reg = <0x00000000 0x00080000>; |
| 767 |
}; |
| 768 |
partition@1 { |
| 769 |
label = "QSPI.U_BOOT.backup"; |
| 770 |
reg = <0x00080000 0x00080000>; |
| 771 |
}; |
| 772 |
partition@2 { |
| 773 |
label = "QSPI.U-BOOT-SPL_OS"; |
| 774 |
reg = <0x00100000 0x00010000>; |
| 775 |
}; |
| 776 |
partition@3 { |
| 777 |
label = "QSPI.U_BOOT_ENV"; |
| 778 |
reg = <0x00110000 0x00010000>; |
| 779 |
}; |
| 780 |
partition@4 { |
| 781 |
label = "QSPI.U-BOOT-ENV.backup"; |
| 782 |
reg = <0x00120000 0x00010000>; |
| 783 |
}; |
| 784 |
partition@5 { |
| 785 |
label = "QSPI.KERNEL"; |
| 786 |
reg = <0x00130000 0x0800000>; |
| 787 |
}; |
| 788 |
partition@6 { |
| 789 |
label = "QSPI.FILESYSTEM"; |
| 790 |
reg = <0x00930000 0x36D0000>; |
| 791 |
}; |
| 792 |
}; |
| 793 |
}; |
| 794 |
|
| 795 |
&mac_sw { |
| 796 |
pinctrl-names = "default", "sleep"; |
| 797 |
pinctrl-0 = <&cpsw_default>; |
| 798 |
pinctrl-1 = <&cpsw_sleep>; |
| 799 |
status = "okay"; |
| 800 |
}; |
| 801 |
|
| 802 |
&davinci_mdio_sw { |
| 803 |
pinctrl-names = "default", "sleep"; |
| 804 |
pinctrl-0 = <&davinci_mdio_default>; |
| 805 |
pinctrl-1 = <&davinci_mdio_sleep>; |
| 806 |
|
| 807 |
ethphy0: ethernet-phy@4 { |
| 808 |
reg = <4>; |
| 809 |
}; |
| 810 |
|
| 811 |
ethphy1: ethernet-phy@5 { |
| 812 |
reg = <5>; |
| 813 |
}; |
| 814 |
}; |
| 815 |
|
| 816 |
&cpsw_port1 { |
| 817 |
phy-handle = <ðphy0>; |
| 818 |
phy-mode = "rgmii-rxid"; |
| 819 |
ti,dual-emac-pvid = <1>; |
| 820 |
}; |
| 821 |
|
| 822 |
&cpsw_port2 { |
| 823 |
phy-handle = <ðphy1>; |
| 824 |
phy-mode = "rgmii-rxid"; |
| 825 |
ti,dual-emac-pvid = <2>; |
| 826 |
}; |
| 827 |
|
| 828 |
&elm { |
| 829 |
status = "okay"; |
| 830 |
}; |
| 831 |
|
| 832 |
&mcasp1 { |
| 833 |
#sound-dai-cells = <0>; |
| 834 |
pinctrl-names = "default", "sleep"; |
| 835 |
pinctrl-0 = <&mcasp1_pins>; |
| 836 |
pinctrl-1 = <&mcasp1_pins_sleep>; |
| 837 |
|
| 838 |
status = "okay"; |
| 839 |
|
| 840 |
op-mode = <0>; |
| 841 |
tdm-slots = <2>; |
| 842 |
serial-dir = < |
| 843 |
0 0 1 2 |
| 844 |
>; |
| 845 |
|
| 846 |
tx-num-evt = <1>; |
| 847 |
rx-num-evt = <1>; |
| 848 |
}; |
| 849 |
|
| 850 |
&dss { |
| 851 |
status = "okay"; |
| 852 |
|
| 853 |
pinctrl-names = "default"; |
| 854 |
pinctrl-0 = <&dss_pins>; |
| 855 |
|
| 856 |
port { |
| 857 |
dpi_out: endpoint@0 { |
| 858 |
remote-endpoint = <&lcd_in>; |
| 859 |
data-lines = <24>; |
| 860 |
}; |
| 861 |
}; |
| 862 |
}; |
| 863 |
|
| 864 |
&rtc { |
| 865 |
clocks = <&clk_32k_rtc>, <&clk_32768_ck>; |
| 866 |
clock-names = "ext-clk", "int-clk"; |
| 867 |
status = "okay"; |
| 868 |
}; |
| 869 |
|
| 870 |
&wdt { |
| 871 |
status = "okay"; |
| 872 |
}; |
| 873 |
|
| 874 |
&cpu { |
| 875 |
cpu0-supply = <&dcdc2>; |
| 876 |
}; |
| 877 |
|
| 878 |
&vpfe0 { |
| 879 |
status = "okay"; |
| 880 |
pinctrl-names = "default", "sleep"; |
| 881 |
pinctrl-0 = <&vpfe0_pins_default>; |
| 882 |
pinctrl-1 = <&vpfe0_pins_sleep>; |
| 883 |
|
| 884 |
/* Camera port */ |
| 885 |
port { |
| 886 |
vpfe0_ep: endpoint { |
| 887 |
remote-endpoint = <&ov2659_1>; |
| 888 |
ti,am437x-vpfe-interface = <0>; |
| 889 |
bus-width = <8>; |
| 890 |
hsync-active = <0>; |
| 891 |
vsync-active = <0>; |
| 892 |
}; |
| 893 |
}; |
| 894 |
}; |
| 895 |
|
| 896 |
&wkup_m3_ipc { |
| 897 |
firmware-name = "am43x-evm-scale-data.bin"; |
| 898 |
}; |
| 899 |
|
| 900 |
&pruss1_mdio { |
| 901 |
status = "disabled"; |
| 902 |
}; |