| 1 |
// SPDX-License-Identifier: GPL-2.0-only |
| 2 |
/* |
| 3 |
* Copyright (C) 2013 Texas Instruments Incorporated - https://www.ti.com/ |
| 4 |
*/ |
| 5 |
/dts-v1/; |
| 6 |
|
| 7 |
#include "dra74x.dtsi" |
| 8 |
#include "dra7-evm-common.dtsi" |
| 9 |
#include "dra74x-mmc-iodelay.dtsi" |
| 10 |
|
| 11 |
/ { |
| 12 |
model = "TI DRA742"; |
| 13 |
compatible = "ti,dra7-evm", "ti,dra742", "ti,dra74", "ti,dra7"; |
| 14 |
|
| 15 |
memory@0 { |
| 16 |
device_type = "memory"; |
| 17 |
reg = <0x0 0x80000000 0x0 0x60000000>; /* 1536 MB */ |
| 18 |
}; |
| 19 |
|
| 20 |
evm_12v0: fixedregulator-evm_12v0 { |
| 21 |
/* main supply */ |
| 22 |
compatible = "regulator-fixed"; |
| 23 |
regulator-name = "evm_12v0"; |
| 24 |
regulator-min-microvolt = <12000000>; |
| 25 |
regulator-max-microvolt = <12000000>; |
| 26 |
regulator-always-on; |
| 27 |
regulator-boot-on; |
| 28 |
}; |
| 29 |
|
| 30 |
evm_1v8_sw: fixedregulator-evm_1v8 { |
| 31 |
compatible = "regulator-fixed"; |
| 32 |
regulator-name = "evm_1v8"; |
| 33 |
vin-supply = <&smps9_reg>; |
| 34 |
regulator-min-microvolt = <1800000>; |
| 35 |
regulator-max-microvolt = <1800000>; |
| 36 |
}; |
| 37 |
|
| 38 |
reserved-memory { |
| 39 |
#address-cells = <2>; |
| 40 |
#size-cells = <2>; |
| 41 |
ranges; |
| 42 |
|
| 43 |
ipu2_memory_region: ipu2-memory@95800000 { |
| 44 |
compatible = "shared-dma-pool"; |
| 45 |
reg = <0x0 0x95800000 0x0 0x3800000>; |
| 46 |
reusable; |
| 47 |
status = "okay"; |
| 48 |
}; |
| 49 |
|
| 50 |
dsp1_memory_region: dsp1-memory@99000000 { |
| 51 |
compatible = "shared-dma-pool"; |
| 52 |
reg = <0x0 0x99000000 0x0 0x4000000>; |
| 53 |
reusable; |
| 54 |
status = "okay"; |
| 55 |
}; |
| 56 |
|
| 57 |
ipu1_memory_region: ipu1-memory@9d000000 { |
| 58 |
compatible = "shared-dma-pool"; |
| 59 |
reg = <0x0 0x9d000000 0x0 0x2000000>; |
| 60 |
reusable; |
| 61 |
status = "okay"; |
| 62 |
}; |
| 63 |
|
| 64 |
dsp2_memory_region: dsp2-memory@9f000000 { |
| 65 |
compatible = "shared-dma-pool"; |
| 66 |
reg = <0x0 0x9f000000 0x0 0x800000>; |
| 67 |
reusable; |
| 68 |
status = "okay"; |
| 69 |
}; |
| 70 |
}; |
| 71 |
|
| 72 |
evm_3v3_sd: fixedregulator-sd { |
| 73 |
compatible = "regulator-fixed"; |
| 74 |
regulator-name = "evm_3v3_sd"; |
| 75 |
regulator-min-microvolt = <3300000>; |
| 76 |
regulator-max-microvolt = <3300000>; |
| 77 |
enable-active-high; |
| 78 |
gpio = <&pcf_gpio_21 5 GPIO_ACTIVE_HIGH>; |
| 79 |
}; |
| 80 |
|
| 81 |
evm_3v3_sw: fixedregulator-evm_3v3_sw { |
| 82 |
compatible = "regulator-fixed"; |
| 83 |
regulator-name = "evm_3v3_sw"; |
| 84 |
vin-supply = <&sysen1>; |
| 85 |
regulator-min-microvolt = <3300000>; |
| 86 |
regulator-max-microvolt = <3300000>; |
| 87 |
}; |
| 88 |
|
| 89 |
aic_dvdd: fixedregulator-aic_dvdd { |
| 90 |
/* TPS77018DBVT */ |
| 91 |
compatible = "regulator-fixed"; |
| 92 |
regulator-name = "aic_dvdd"; |
| 93 |
vin-supply = <&evm_3v3_sw>; |
| 94 |
regulator-min-microvolt = <1800000>; |
| 95 |
regulator-max-microvolt = <1800000>; |
| 96 |
}; |
| 97 |
|
| 98 |
vsys_3v3: fixedregulator-vsys3v3 { |
| 99 |
/* Output of Cntlr A of TPS43351-Q1 on dra7-evm */ |
| 100 |
compatible = "regulator-fixed"; |
| 101 |
regulator-name = "vsys_3v3"; |
| 102 |
regulator-min-microvolt = <3300000>; |
| 103 |
regulator-max-microvolt = <3300000>; |
| 104 |
vin-supply = <&evm_12v0>; |
| 105 |
regulator-always-on; |
| 106 |
regulator-boot-on; |
| 107 |
}; |
| 108 |
|
| 109 |
evm_5v0: fixedregulator-evm_5v0 { |
| 110 |
/* Output of Cntlr B of TPS43351-Q1 on dra7-evm */ |
| 111 |
compatible = "regulator-fixed"; |
| 112 |
regulator-name = "evm_5v0"; |
| 113 |
regulator-min-microvolt = <5000000>; |
| 114 |
regulator-max-microvolt = <5000000>; |
| 115 |
vin-supply = <&evm_12v0>; |
| 116 |
regulator-always-on; |
| 117 |
regulator-boot-on; |
| 118 |
}; |
| 119 |
|
| 120 |
evm_3v6: fixedregulator-evm_3v6 { |
| 121 |
compatible = "regulator-fixed"; |
| 122 |
regulator-name = "evm_3v6"; |
| 123 |
regulator-min-microvolt = <3600000>; |
| 124 |
regulator-max-microvolt = <3600000>; |
| 125 |
vin-supply = <&evm_5v0>; |
| 126 |
regulator-always-on; |
| 127 |
regulator-boot-on; |
| 128 |
}; |
| 129 |
|
| 130 |
vmmcwl_fixed: fixedregulator-mmcwl { |
| 131 |
compatible = "regulator-fixed"; |
| 132 |
regulator-name = "vmmcwl_fixed"; |
| 133 |
regulator-min-microvolt = <1800000>; |
| 134 |
regulator-max-microvolt = <1800000>; |
| 135 |
gpio = <&gpio5 8 0>; |
| 136 |
startup-delay-us = <70000>; |
| 137 |
enable-active-high; |
| 138 |
}; |
| 139 |
|
| 140 |
vtt_fixed: fixedregulator-vtt { |
| 141 |
compatible = "regulator-fixed"; |
| 142 |
regulator-name = "vtt_fixed"; |
| 143 |
regulator-min-microvolt = <1350000>; |
| 144 |
regulator-max-microvolt = <1350000>; |
| 145 |
regulator-always-on; |
| 146 |
regulator-boot-on; |
| 147 |
enable-active-high; |
| 148 |
vin-supply = <&sysen2>; |
| 149 |
gpio = <&gpio7 11 GPIO_ACTIVE_HIGH>; |
| 150 |
}; |
| 151 |
|
| 152 |
}; |
| 153 |
|
| 154 |
&dra7_pmx_core { |
| 155 |
dcan1_pins_default: dcan1-default-pins { |
| 156 |
pinctrl-single,pins = < |
| 157 |
DRA7XX_CORE_IOPAD(0x37d0, PIN_OUTPUT_PULLUP | MUX_MODE0) /* dcan1_tx */ |
| 158 |
DRA7XX_CORE_IOPAD(0x3818, PULL_UP | MUX_MODE1) /* wakeup0.dcan1_rx */ |
| 159 |
>; |
| 160 |
}; |
| 161 |
|
| 162 |
dcan1_pins_sleep: dcan1-sleep-pins { |
| 163 |
pinctrl-single,pins = < |
| 164 |
DRA7XX_CORE_IOPAD(0x37d0, MUX_MODE15 | PULL_UP) /* dcan1_tx.off */ |
| 165 |
DRA7XX_CORE_IOPAD(0x3818, MUX_MODE15 | PULL_UP) /* wakeup0.off */ |
| 166 |
>; |
| 167 |
}; |
| 168 |
}; |
| 169 |
|
| 170 |
&i2c1 { |
| 171 |
status = "okay"; |
| 172 |
clock-frequency = <400000>; |
| 173 |
|
| 174 |
tps659038: tps659038@58 { |
| 175 |
compatible = "ti,tps659038"; |
| 176 |
reg = <0x58>; |
| 177 |
ti,palmas-override-powerhold; |
| 178 |
ti,system-power-controller; |
| 179 |
|
| 180 |
tps659038_pmic { |
| 181 |
compatible = "ti,tps659038-pmic"; |
| 182 |
|
| 183 |
regulators { |
| 184 |
smps123_reg: smps123 { |
| 185 |
/* VDD_MPU */ |
| 186 |
regulator-name = "smps123"; |
| 187 |
regulator-min-microvolt = < 850000>; |
| 188 |
regulator-max-microvolt = <1250000>; |
| 189 |
regulator-always-on; |
| 190 |
regulator-boot-on; |
| 191 |
}; |
| 192 |
|
| 193 |
smps45_reg: smps45 { |
| 194 |
/* VDD_DSPEVE */ |
| 195 |
regulator-name = "smps45"; |
| 196 |
regulator-min-microvolt = < 850000>; |
| 197 |
regulator-max-microvolt = <1250000>; |
| 198 |
regulator-always-on; |
| 199 |
regulator-boot-on; |
| 200 |
}; |
| 201 |
|
| 202 |
smps6_reg: smps6 { |
| 203 |
/* VDD_GPU - over VDD_SMPS6 */ |
| 204 |
regulator-name = "smps6"; |
| 205 |
regulator-min-microvolt = <850000>; |
| 206 |
regulator-max-microvolt = <1250000>; |
| 207 |
regulator-always-on; |
| 208 |
regulator-boot-on; |
| 209 |
}; |
| 210 |
|
| 211 |
smps7_reg: smps7 { |
| 212 |
/* CORE_VDD */ |
| 213 |
regulator-name = "smps7"; |
| 214 |
regulator-min-microvolt = <850000>; |
| 215 |
regulator-max-microvolt = <1150000>; |
| 216 |
regulator-always-on; |
| 217 |
regulator-boot-on; |
| 218 |
}; |
| 219 |
|
| 220 |
smps8_reg: smps8 { |
| 221 |
/* VDD_IVAHD */ |
| 222 |
regulator-name = "smps8"; |
| 223 |
regulator-min-microvolt = < 850000>; |
| 224 |
regulator-max-microvolt = <1250000>; |
| 225 |
regulator-always-on; |
| 226 |
regulator-boot-on; |
| 227 |
}; |
| 228 |
|
| 229 |
smps9_reg: smps9 { |
| 230 |
/* VDDS1V8 */ |
| 231 |
regulator-name = "smps9"; |
| 232 |
regulator-min-microvolt = <1800000>; |
| 233 |
regulator-max-microvolt = <1800000>; |
| 234 |
regulator-always-on; |
| 235 |
regulator-boot-on; |
| 236 |
}; |
| 237 |
|
| 238 |
ldo1_reg: ldo1 { |
| 239 |
/* LDO1_OUT --> SDIO */ |
| 240 |
regulator-name = "ldo1"; |
| 241 |
regulator-min-microvolt = <1800000>; |
| 242 |
regulator-max-microvolt = <3300000>; |
| 243 |
regulator-always-on; |
| 244 |
regulator-boot-on; |
| 245 |
}; |
| 246 |
|
| 247 |
ldo2_reg: ldo2 { |
| 248 |
/* VDD_RTCIO */ |
| 249 |
/* LDO2 -> VDDSHV5, LDO2 also goes to CAN_PHY_3V3 */ |
| 250 |
regulator-name = "ldo2"; |
| 251 |
regulator-min-microvolt = <3300000>; |
| 252 |
regulator-max-microvolt = <3300000>; |
| 253 |
regulator-always-on; |
| 254 |
regulator-boot-on; |
| 255 |
}; |
| 256 |
|
| 257 |
ldo3_reg: ldo3 { |
| 258 |
/* VDDA_1V8_PHY */ |
| 259 |
regulator-name = "ldo3"; |
| 260 |
regulator-min-microvolt = <1800000>; |
| 261 |
regulator-max-microvolt = <1800000>; |
| 262 |
regulator-always-on; |
| 263 |
regulator-boot-on; |
| 264 |
}; |
| 265 |
|
| 266 |
ldo9_reg: ldo9 { |
| 267 |
/* VDD_RTC */ |
| 268 |
regulator-name = "ldo9"; |
| 269 |
regulator-min-microvolt = <1050000>; |
| 270 |
regulator-max-microvolt = <1050000>; |
| 271 |
regulator-always-on; |
| 272 |
regulator-boot-on; |
| 273 |
regulator-allow-bypass; |
| 274 |
}; |
| 275 |
|
| 276 |
ldoln_reg: ldoln { |
| 277 |
/* VDDA_1V8_PLL */ |
| 278 |
regulator-name = "ldoln"; |
| 279 |
regulator-min-microvolt = <1800000>; |
| 280 |
regulator-max-microvolt = <1800000>; |
| 281 |
regulator-always-on; |
| 282 |
regulator-boot-on; |
| 283 |
}; |
| 284 |
|
| 285 |
ldousb_reg: ldousb { |
| 286 |
/* VDDA_3V_USB: VDDA_USBHS33 */ |
| 287 |
regulator-name = "ldousb"; |
| 288 |
regulator-min-microvolt = <3300000>; |
| 289 |
regulator-max-microvolt = <3300000>; |
| 290 |
regulator-boot-on; |
| 291 |
}; |
| 292 |
|
| 293 |
/* REGEN1 is unused */ |
| 294 |
|
| 295 |
regen2: regen2 { |
| 296 |
/* Needed for PMIC internal resources */ |
| 297 |
regulator-name = "regen2"; |
| 298 |
regulator-boot-on; |
| 299 |
regulator-always-on; |
| 300 |
}; |
| 301 |
|
| 302 |
/* REGEN3 is unused */ |
| 303 |
|
| 304 |
sysen1: sysen1 { |
| 305 |
/* PMIC_REGEN_3V3 */ |
| 306 |
regulator-name = "sysen1"; |
| 307 |
regulator-boot-on; |
| 308 |
regulator-always-on; |
| 309 |
}; |
| 310 |
|
| 311 |
sysen2: sysen2 { |
| 312 |
/* PMIC_REGEN_DDR */ |
| 313 |
regulator-name = "sysen2"; |
| 314 |
regulator-boot-on; |
| 315 |
regulator-always-on; |
| 316 |
}; |
| 317 |
}; |
| 318 |
}; |
| 319 |
}; |
| 320 |
|
| 321 |
pcf_lcd: gpio@20 { |
| 322 |
compatible = "nxp,pcf8575"; |
| 323 |
reg = <0x20>; |
| 324 |
gpio-controller; |
| 325 |
#gpio-cells = <2>; |
| 326 |
interrupt-parent = <&gpio6>; |
| 327 |
interrupts = <11 IRQ_TYPE_EDGE_FALLING>; |
| 328 |
interrupt-controller; |
| 329 |
#interrupt-cells = <2>; |
| 330 |
}; |
| 331 |
|
| 332 |
pcf_gpio_21: gpio@21 { |
| 333 |
compatible = "nxp,pcf8575"; |
| 334 |
reg = <0x21>; |
| 335 |
lines-initial-states = <0x1408>; |
| 336 |
gpio-controller; |
| 337 |
#gpio-cells = <2>; |
| 338 |
interrupt-parent = <&gpio6>; |
| 339 |
interrupts = <11 IRQ_TYPE_EDGE_FALLING>; |
| 340 |
interrupt-controller; |
| 341 |
#interrupt-cells = <2>; |
| 342 |
}; |
| 343 |
|
| 344 |
tlv320aic3106: tlv320aic3106@19 { |
| 345 |
#sound-dai-cells = <0>; |
| 346 |
compatible = "ti,tlv320aic3106"; |
| 347 |
reg = <0x19>; |
| 348 |
adc-settle-ms = <40>; |
| 349 |
ai3x-micbias-vg = <1>; /* 2.0V */ |
| 350 |
status = "okay"; |
| 351 |
|
| 352 |
/* Regulators */ |
| 353 |
AVDD-supply = <&evm_3v3_sw>; |
| 354 |
IOVDD-supply = <&evm_3v3_sw>; |
| 355 |
DRVDD-supply = <&evm_3v3_sw>; |
| 356 |
DVDD-supply = <&aic_dvdd>; |
| 357 |
}; |
| 358 |
}; |
| 359 |
|
| 360 |
&i2c2 { |
| 361 |
status = "okay"; |
| 362 |
clock-frequency = <400000>; |
| 363 |
|
| 364 |
pcf_hdmi: gpio@26 { |
| 365 |
compatible = "nxp,pcf8575"; |
| 366 |
reg = <0x26>; |
| 367 |
gpio-controller; |
| 368 |
#gpio-cells = <2>; |
| 369 |
hdmi-audio-hog { |
| 370 |
/* vin6_sel_s0: high: VIN6, low: audio */ |
| 371 |
gpio-hog; |
| 372 |
gpios = <1 GPIO_ACTIVE_HIGH>; |
| 373 |
output-low; |
| 374 |
line-name = "vin6_sel_s0"; |
| 375 |
}; |
| 376 |
}; |
| 377 |
}; |
| 378 |
|
| 379 |
&mmc1 { |
| 380 |
status = "okay"; |
| 381 |
vmmc-supply = <&evm_3v3_sd>; |
| 382 |
vqmmc-supply = <&ldo1_reg>; |
| 383 |
bus-width = <4>; |
| 384 |
/* |
| 385 |
* SDCD signal is not being used here - using the fact that GPIO mode |
| 386 |
* is always hardwired. |
| 387 |
*/ |
| 388 |
cd-gpios = <&gpio6 27 GPIO_ACTIVE_LOW>; |
| 389 |
pinctrl-names = "default", "hs", "sdr12", "sdr25", "sdr50", "ddr50-rev11", "sdr104-rev11", "ddr50", "sdr104"; |
| 390 |
pinctrl-0 = <&mmc1_pins_default>; |
| 391 |
pinctrl-1 = <&mmc1_pins_hs>; |
| 392 |
pinctrl-2 = <&mmc1_pins_sdr12>; |
| 393 |
pinctrl-3 = <&mmc1_pins_sdr25>; |
| 394 |
pinctrl-4 = <&mmc1_pins_sdr50>; |
| 395 |
pinctrl-5 = <&mmc1_pins_ddr50 &mmc1_iodelay_ddr_rev11_conf>; |
| 396 |
pinctrl-6 = <&mmc1_pins_sdr104 &mmc1_iodelay_sdr104_rev11_conf>; |
| 397 |
pinctrl-7 = <&mmc1_pins_ddr50 &mmc1_iodelay_ddr_rev20_conf>; |
| 398 |
pinctrl-8 = <&mmc1_pins_sdr104 &mmc1_iodelay_sdr104_rev20_conf>; |
| 399 |
}; |
| 400 |
|
| 401 |
&mmc2 { |
| 402 |
status = "okay"; |
| 403 |
vmmc-supply = <&evm_1v8_sw>; |
| 404 |
vqmmc-supply = <&evm_1v8_sw>; |
| 405 |
bus-width = <8>; |
| 406 |
non-removable; |
| 407 |
pinctrl-names = "default", "hs", "ddr_1_8v-rev11", "ddr_1_8v", "hs200_1_8v-rev11", "hs200_1_8v"; |
| 408 |
pinctrl-0 = <&mmc2_pins_default>; |
| 409 |
pinctrl-1 = <&mmc2_pins_hs>; |
| 410 |
pinctrl-2 = <&mmc2_pins_ddr_1_8v_rev11 &mmc2_iodelay_ddr_1_8v_rev11_conf>; |
| 411 |
pinctrl-3 = <&mmc2_pins_ddr_rev20>; |
| 412 |
pinctrl-4 = <&mmc2_pins_hs200 &mmc2_iodelay_hs200_rev11_conf>; |
| 413 |
pinctrl-5 = <&mmc2_pins_hs200 &mmc2_iodelay_hs200_rev20_conf>; |
| 414 |
}; |
| 415 |
|
| 416 |
&mmc4 { |
| 417 |
status = "okay"; |
| 418 |
vmmc-supply = <&evm_3v6>; |
| 419 |
vqmmc-supply = <&vmmcwl_fixed>; |
| 420 |
pinctrl-names = "default-rev11", "default", "hs-rev11", "hs", "sdr12-rev11", "sdr12", "sdr25-rev11", "sdr25"; |
| 421 |
pinctrl-0 = <&mmc4_pins_default &mmc4_iodelay_ds_rev11_conf>; |
| 422 |
pinctrl-1 = <&mmc4_pins_default &mmc4_iodelay_ds_rev20_conf>; |
| 423 |
pinctrl-2 = <&mmc4_pins_hs &mmc4_iodelay_sdr12_hs_sdr25_rev11_conf>; |
| 424 |
pinctrl-3 = <&mmc4_pins_hs &mmc4_iodelay_sdr12_hs_sdr25_rev20_conf>; |
| 425 |
pinctrl-4 = <&mmc4_pins_sdr12 &mmc4_iodelay_sdr12_hs_sdr25_rev11_conf>; |
| 426 |
pinctrl-5 = <&mmc4_pins_sdr12 &mmc4_iodelay_sdr12_hs_sdr25_rev20_conf>; |
| 427 |
pinctrl-6 = <&mmc4_pins_sdr25 &mmc4_iodelay_sdr12_hs_sdr25_rev11_conf>; |
| 428 |
pinctrl-7 = <&mmc4_pins_sdr25 &mmc4_iodelay_sdr12_hs_sdr25_rev20_conf>; |
| 429 |
}; |
| 430 |
|
| 431 |
&cpu0 { |
| 432 |
vdd-supply = <&smps123_reg>; |
| 433 |
}; |
| 434 |
|
| 435 |
&elm { |
| 436 |
status = "okay"; |
| 437 |
}; |
| 438 |
|
| 439 |
&gpmc { |
| 440 |
/* |
| 441 |
* For the existing IOdelay configuration via U-Boot we don't |
| 442 |
* support NAND on dra7-evm. Keep it disabled. Enabling it |
| 443 |
* requires a different configuration by U-Boot. |
| 444 |
*/ |
| 445 |
status = "disabled"; |
| 446 |
ranges = <0 0 0x08000000 0x01000000>; /* minimum GPMC partition = 16MB */ |
| 447 |
nand@0,0 { |
| 448 |
compatible = "ti,omap2-nand"; |
| 449 |
reg = <0 0 4>; /* device IO registers */ |
| 450 |
interrupt-parent = <&gpmc>; |
| 451 |
interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */ |
| 452 |
<1 IRQ_TYPE_NONE>; /* termcount */ |
| 453 |
rb-gpios = <&gpmc 0 GPIO_ACTIVE_HIGH>; /* gpmc_wait0 pin */ |
| 454 |
ti,nand-xfer-type = "prefetch-dma"; |
| 455 |
ti,nand-ecc-opt = "bch8"; |
| 456 |
ti,elm-id = <&elm>; |
| 457 |
nand-bus-width = <16>; |
| 458 |
gpmc,device-width = <2>; |
| 459 |
gpmc,sync-clk-ps = <0>; |
| 460 |
gpmc,cs-on-ns = <0>; |
| 461 |
gpmc,cs-rd-off-ns = <80>; |
| 462 |
gpmc,cs-wr-off-ns = <80>; |
| 463 |
gpmc,adv-on-ns = <0>; |
| 464 |
gpmc,adv-rd-off-ns = <60>; |
| 465 |
gpmc,adv-wr-off-ns = <60>; |
| 466 |
gpmc,we-on-ns = <10>; |
| 467 |
gpmc,we-off-ns = <50>; |
| 468 |
gpmc,oe-on-ns = <4>; |
| 469 |
gpmc,oe-off-ns = <40>; |
| 470 |
gpmc,access-ns = <40>; |
| 471 |
gpmc,wr-access-ns = <80>; |
| 472 |
gpmc,rd-cycle-ns = <80>; |
| 473 |
gpmc,wr-cycle-ns = <80>; |
| 474 |
gpmc,bus-turnaround-ns = <0>; |
| 475 |
gpmc,cycle2cycle-delay-ns = <0>; |
| 476 |
gpmc,clk-activation-ns = <0>; |
| 477 |
gpmc,wr-data-mux-bus-ns = <0>; |
| 478 |
/* MTD partition table */ |
| 479 |
/* All SPL-* partitions are sized to minimal length |
| 480 |
* which can be independently programmable. For |
| 481 |
* NAND flash this is equal to size of erase-block */ |
| 482 |
#address-cells = <1>; |
| 483 |
#size-cells = <1>; |
| 484 |
partition@0 { |
| 485 |
label = "NAND.SPL"; |
| 486 |
reg = <0x00000000 0x00020000>; |
| 487 |
}; |
| 488 |
partition@1 { |
| 489 |
label = "NAND.SPL.backup1"; |
| 490 |
reg = <0x00020000 0x00020000>; |
| 491 |
}; |
| 492 |
partition@2 { |
| 493 |
label = "NAND.SPL.backup2"; |
| 494 |
reg = <0x00040000 0x00020000>; |
| 495 |
}; |
| 496 |
partition@3 { |
| 497 |
label = "NAND.SPL.backup3"; |
| 498 |
reg = <0x00060000 0x00020000>; |
| 499 |
}; |
| 500 |
partition@4 { |
| 501 |
label = "NAND.u-boot-spl-os"; |
| 502 |
reg = <0x00080000 0x00040000>; |
| 503 |
}; |
| 504 |
partition@5 { |
| 505 |
label = "NAND.u-boot"; |
| 506 |
reg = <0x000c0000 0x00100000>; |
| 507 |
}; |
| 508 |
partition@6 { |
| 509 |
label = "NAND.u-boot-env"; |
| 510 |
reg = <0x001c0000 0x00020000>; |
| 511 |
}; |
| 512 |
partition@7 { |
| 513 |
label = "NAND.u-boot-env.backup1"; |
| 514 |
reg = <0x001e0000 0x00020000>; |
| 515 |
}; |
| 516 |
partition@8 { |
| 517 |
label = "NAND.kernel"; |
| 518 |
reg = <0x00200000 0x00800000>; |
| 519 |
}; |
| 520 |
partition@9 { |
| 521 |
label = "NAND.file-system"; |
| 522 |
reg = <0x00a00000 0x0f600000>; |
| 523 |
}; |
| 524 |
}; |
| 525 |
}; |
| 526 |
|
| 527 |
&usb2_phy1 { |
| 528 |
phy-supply = <&ldousb_reg>; |
| 529 |
}; |
| 530 |
|
| 531 |
&usb2_phy2 { |
| 532 |
phy-supply = <&ldousb_reg>; |
| 533 |
}; |
| 534 |
|
| 535 |
&gpio7_target { |
| 536 |
ti,no-reset-on-init; |
| 537 |
ti,no-idle-on-init; |
| 538 |
}; |
| 539 |
|
| 540 |
&mac_sw { |
| 541 |
status = "okay"; |
| 542 |
}; |
| 543 |
|
| 544 |
&cpsw_port1 { |
| 545 |
phy-handle = <ðphy0>; |
| 546 |
phy-mode = "rgmii"; |
| 547 |
ti,dual-emac-pvid = <1>; |
| 548 |
}; |
| 549 |
|
| 550 |
&cpsw_port2 { |
| 551 |
phy-handle = <ðphy1>; |
| 552 |
phy-mode = "rgmii"; |
| 553 |
ti,dual-emac-pvid = <2>; |
| 554 |
}; |
| 555 |
|
| 556 |
&davinci_mdio_sw { |
| 557 |
ethphy0: ethernet-phy@2 { |
| 558 |
reg = <2>; |
| 559 |
}; |
| 560 |
|
| 561 |
ethphy1: ethernet-phy@3 { |
| 562 |
reg = <3>; |
| 563 |
}; |
| 564 |
}; |
| 565 |
|
| 566 |
&dcan1 { |
| 567 |
status = "okay"; |
| 568 |
pinctrl-names = "default", "sleep", "active"; |
| 569 |
pinctrl-0 = <&dcan1_pins_sleep>; |
| 570 |
pinctrl-1 = <&dcan1_pins_sleep>; |
| 571 |
pinctrl-2 = <&dcan1_pins_default>; |
| 572 |
}; |
| 573 |
|
| 574 |
&ipu2 { |
| 575 |
status = "okay"; |
| 576 |
memory-region = <&ipu2_memory_region>; |
| 577 |
}; |
| 578 |
|
| 579 |
&ipu1 { |
| 580 |
status = "okay"; |
| 581 |
memory-region = <&ipu1_memory_region>; |
| 582 |
}; |
| 583 |
|
| 584 |
&dsp1 { |
| 585 |
status = "okay"; |
| 586 |
memory-region = <&dsp1_memory_region>; |
| 587 |
}; |
| 588 |
|
| 589 |
&dsp2 { |
| 590 |
status = "okay"; |
| 591 |
memory-region = <&dsp2_memory_region>; |
| 592 |
}; |