| 1 |
// SPDX-License-Identifier: GPL-2.0-only |
| 2 |
/* |
| 3 |
* Device Tree Source for OMAP3 SoC |
| 4 |
* |
| 5 |
* Copyright (C) 2011 Texas Instruments Incorporated - https://www.ti.com/ |
| 6 |
*/ |
| 7 |
|
| 8 |
#include <dt-bindings/bus/ti-sysc.h> |
| 9 |
#include <dt-bindings/gpio/gpio.h> |
| 10 |
#include <dt-bindings/interrupt-controller/irq.h> |
| 11 |
#include <dt-bindings/pinctrl/omap.h> |
| 12 |
|
| 13 |
/ { |
| 14 |
compatible = "ti,omap3430", "ti,omap3"; |
| 15 |
interrupt-parent = <&intc>; |
| 16 |
#address-cells = <1>; |
| 17 |
#size-cells = <1>; |
| 18 |
chosen { }; |
| 19 |
|
| 20 |
aliases { |
| 21 |
i2c0 = &i2c1; |
| 22 |
i2c1 = &i2c2; |
| 23 |
i2c2 = &i2c3; |
| 24 |
mmc0 = &mmc1; |
| 25 |
mmc1 = &mmc2; |
| 26 |
mmc2 = &mmc3; |
| 27 |
serial0 = &uart1; |
| 28 |
serial1 = &uart2; |
| 29 |
serial2 = &uart3; |
| 30 |
}; |
| 31 |
|
| 32 |
cpus { |
| 33 |
#address-cells = <1>; |
| 34 |
#size-cells = <0>; |
| 35 |
|
| 36 |
cpu@0 { |
| 37 |
compatible = "arm,cortex-a8"; |
| 38 |
device_type = "cpu"; |
| 39 |
reg = <0x0>; |
| 40 |
|
| 41 |
clocks = <&dpll1_ck>; |
| 42 |
clock-names = "cpu"; |
| 43 |
|
| 44 |
clock-latency = <300000>; /* From omap-cpufreq driver */ |
| 45 |
}; |
| 46 |
}; |
| 47 |
|
| 48 |
pmu@54000000 { |
| 49 |
compatible = "arm,cortex-a8-pmu"; |
| 50 |
reg = <0x54000000 0x800000>; |
| 51 |
interrupts = <3>; |
| 52 |
ti,hwmods = "debugss"; |
| 53 |
}; |
| 54 |
|
| 55 |
/* |
| 56 |
* The soc node represents the soc top level view. It is used for IPs |
| 57 |
* that are not memory mapped in the MPU view or for the MPU itself. |
| 58 |
*/ |
| 59 |
soc { |
| 60 |
compatible = "ti,omap-infra"; |
| 61 |
mpu { |
| 62 |
compatible = "ti,omap3-mpu"; |
| 63 |
ti,hwmods = "mpu"; |
| 64 |
}; |
| 65 |
|
| 66 |
iva: iva { |
| 67 |
compatible = "ti,iva2.2"; |
| 68 |
ti,hwmods = "iva"; |
| 69 |
|
| 70 |
dsp { |
| 71 |
compatible = "ti,omap3-c64"; |
| 72 |
}; |
| 73 |
}; |
| 74 |
}; |
| 75 |
|
| 76 |
/* |
| 77 |
* XXX: Use a flat representation of the OMAP3 interconnect. |
| 78 |
* The real OMAP interconnect network is quite complex. |
| 79 |
* Since it will not bring real advantage to represent that in DT for |
| 80 |
* the moment, just use a fake OCP bus entry to represent the whole bus |
| 81 |
* hierarchy. |
| 82 |
*/ |
| 83 |
ocp@68000000 { |
| 84 |
compatible = "ti,omap3-l3-smx", "simple-bus"; |
| 85 |
reg = <0x68000000 0x10000>; |
| 86 |
interrupts = <9 10>; |
| 87 |
#address-cells = <1>; |
| 88 |
#size-cells = <1>; |
| 89 |
ranges; |
| 90 |
ti,hwmods = "l3_main"; |
| 91 |
|
| 92 |
l4_core: l4@48000000 { |
| 93 |
compatible = "ti,omap3-l4-core", "simple-bus"; |
| 94 |
#address-cells = <1>; |
| 95 |
#size-cells = <1>; |
| 96 |
ranges = <0 0x48000000 0x1000000>; |
| 97 |
|
| 98 |
scm: scm@2000 { |
| 99 |
compatible = "ti,omap3-scm", "simple-bus"; |
| 100 |
reg = <0x2000 0x2000>; |
| 101 |
#address-cells = <1>; |
| 102 |
#size-cells = <1>; |
| 103 |
ranges = <0 0x2000 0x2000>; |
| 104 |
|
| 105 |
omap3_pmx_core: pinmux@30 { |
| 106 |
compatible = "ti,omap3-padconf", |
| 107 |
"pinctrl-single"; |
| 108 |
reg = <0x30 0x238>; |
| 109 |
#address-cells = <1>; |
| 110 |
#size-cells = <0>; |
| 111 |
#pinctrl-cells = <1>; |
| 112 |
#interrupt-cells = <1>; |
| 113 |
interrupt-controller; |
| 114 |
pinctrl-single,register-width = <16>; |
| 115 |
pinctrl-single,function-mask = <0xff1f>; |
| 116 |
}; |
| 117 |
|
| 118 |
scm_conf: scm_conf@270 { |
| 119 |
compatible = "syscon", "simple-bus"; |
| 120 |
reg = <0x270 0x330>; |
| 121 |
#address-cells = <1>; |
| 122 |
#size-cells = <1>; |
| 123 |
ranges = <0 0x270 0x330>; |
| 124 |
|
| 125 |
pbias_regulator: pbias_regulator@2b0 { |
| 126 |
compatible = "ti,pbias-omap3", "ti,pbias-omap"; |
| 127 |
reg = <0x2b0 0x4>; |
| 128 |
syscon = <&scm_conf>; |
| 129 |
pbias_mmc_reg: pbias_mmc_omap2430 { |
| 130 |
regulator-name = "pbias_mmc_omap2430"; |
| 131 |
regulator-min-microvolt = <1800000>; |
| 132 |
regulator-max-microvolt = <3000000>; |
| 133 |
}; |
| 134 |
}; |
| 135 |
|
| 136 |
scm_clocks: clocks { |
| 137 |
#address-cells = <1>; |
| 138 |
#size-cells = <0>; |
| 139 |
}; |
| 140 |
}; |
| 141 |
|
| 142 |
scm_clockdomains: clockdomains { |
| 143 |
}; |
| 144 |
|
| 145 |
omap3_pmx_wkup: pinmux@a00 { |
| 146 |
compatible = "ti,omap3-padconf", |
| 147 |
"pinctrl-single"; |
| 148 |
reg = <0xa00 0x5c>; |
| 149 |
#address-cells = <1>; |
| 150 |
#size-cells = <0>; |
| 151 |
#pinctrl-cells = <1>; |
| 152 |
#interrupt-cells = <1>; |
| 153 |
interrupt-controller; |
| 154 |
pinctrl-single,register-width = <16>; |
| 155 |
pinctrl-single,function-mask = <0xff1f>; |
| 156 |
}; |
| 157 |
}; |
| 158 |
}; |
| 159 |
|
| 160 |
aes1_target: target-module@480a6000 { |
| 161 |
compatible = "ti,sysc-omap2", "ti,sysc"; |
| 162 |
reg = <0x480a6044 0x4>, |
| 163 |
<0x480a6048 0x4>, |
| 164 |
<0x480a604c 0x4>; |
| 165 |
reg-names = "rev", "sysc", "syss"; |
| 166 |
ti,sysc-mask = <(SYSC_OMAP2_AUTOIDLE)>; |
| 167 |
ti,sysc-sidle = <SYSC_IDLE_FORCE>, |
| 168 |
<SYSC_IDLE_NO>, |
| 169 |
<SYSC_IDLE_SMART>; |
| 170 |
ti,syss-mask = <1>; |
| 171 |
clocks = <&aes1_ick>; |
| 172 |
clock-names = "ick"; |
| 173 |
#address-cells = <1>; |
| 174 |
#size-cells = <1>; |
| 175 |
ranges = <0 0x480a6000 0x2000>; |
| 176 |
|
| 177 |
aes1: aes1@0 { |
| 178 |
compatible = "ti,omap3-aes"; |
| 179 |
reg = <0 0x50>; |
| 180 |
interrupts = <0>; |
| 181 |
dmas = <&sdma 9 &sdma 10>; |
| 182 |
dma-names = "tx", "rx"; |
| 183 |
}; |
| 184 |
}; |
| 185 |
|
| 186 |
aes2_target: target-module@480c5000 { |
| 187 |
compatible = "ti,sysc-omap2", "ti,sysc"; |
| 188 |
reg = <0x480c5044 0x4>, |
| 189 |
<0x480c5048 0x4>, |
| 190 |
<0x480c504c 0x4>; |
| 191 |
reg-names = "rev", "sysc", "syss"; |
| 192 |
ti,sysc-mask = <(SYSC_OMAP2_AUTOIDLE)>; |
| 193 |
ti,sysc-sidle = <SYSC_IDLE_FORCE>, |
| 194 |
<SYSC_IDLE_NO>, |
| 195 |
<SYSC_IDLE_SMART>; |
| 196 |
ti,syss-mask = <1>; |
| 197 |
clocks = <&aes2_ick>; |
| 198 |
clock-names = "ick"; |
| 199 |
#address-cells = <1>; |
| 200 |
#size-cells = <1>; |
| 201 |
ranges = <0 0x480c5000 0x2000>; |
| 202 |
|
| 203 |
aes2: aes2@0 { |
| 204 |
compatible = "ti,omap3-aes"; |
| 205 |
reg = <0 0x50>; |
| 206 |
interrupts = <0>; |
| 207 |
dmas = <&sdma 65 &sdma 66>; |
| 208 |
dma-names = "tx", "rx"; |
| 209 |
}; |
| 210 |
}; |
| 211 |
|
| 212 |
prm: prm@48306000 { |
| 213 |
compatible = "ti,omap3-prm"; |
| 214 |
reg = <0x48306000 0x4000>; |
| 215 |
interrupts = <11>; |
| 216 |
|
| 217 |
prm_clocks: clocks { |
| 218 |
#address-cells = <1>; |
| 219 |
#size-cells = <0>; |
| 220 |
}; |
| 221 |
|
| 222 |
prm_clockdomains: clockdomains { |
| 223 |
}; |
| 224 |
}; |
| 225 |
|
| 226 |
cm: cm@48004000 { |
| 227 |
compatible = "ti,omap3-cm"; |
| 228 |
reg = <0x48004000 0x4000>; |
| 229 |
|
| 230 |
cm_clocks: clocks { |
| 231 |
#address-cells = <1>; |
| 232 |
#size-cells = <0>; |
| 233 |
}; |
| 234 |
|
| 235 |
cm_clockdomains: clockdomains { |
| 236 |
}; |
| 237 |
}; |
| 238 |
|
| 239 |
target-module@48320000 { |
| 240 |
compatible = "ti,sysc-omap2", "ti,sysc"; |
| 241 |
reg = <0x48320000 0x4>, |
| 242 |
<0x48320004 0x4>; |
| 243 |
reg-names = "rev", "sysc"; |
| 244 |
ti,sysc-sidle = <SYSC_IDLE_FORCE>, |
| 245 |
<SYSC_IDLE_NO>; |
| 246 |
clocks = <&wkup_32k_fck>, <&omap_32ksync_ick>; |
| 247 |
clock-names = "fck", "ick"; |
| 248 |
#address-cells = <1>; |
| 249 |
#size-cells = <1>; |
| 250 |
ranges = <0x0 0x48320000 0x1000>; |
| 251 |
|
| 252 |
counter32k: counter@0 { |
| 253 |
compatible = "ti,omap-counter32k"; |
| 254 |
reg = <0x0 0x20>; |
| 255 |
}; |
| 256 |
}; |
| 257 |
|
| 258 |
intc: interrupt-controller@48200000 { |
| 259 |
compatible = "ti,omap3-intc"; |
| 260 |
interrupt-controller; |
| 261 |
#interrupt-cells = <1>; |
| 262 |
reg = <0x48200000 0x1000>; |
| 263 |
}; |
| 264 |
|
| 265 |
target-module@48056000 { |
| 266 |
compatible = "ti,sysc-omap2", "ti,sysc"; |
| 267 |
reg = <0x48056000 0x4>, |
| 268 |
<0x4805602c 0x4>, |
| 269 |
<0x48056028 0x4>; |
| 270 |
reg-names = "rev", "sysc", "syss"; |
| 271 |
ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY | |
| 272 |
SYSC_OMAP2_EMUFREE | |
| 273 |
SYSC_OMAP2_SOFTRESET | |
| 274 |
SYSC_OMAP2_AUTOIDLE)>; |
| 275 |
ti,sysc-midle = <SYSC_IDLE_FORCE>, |
| 276 |
<SYSC_IDLE_NO>, |
| 277 |
<SYSC_IDLE_SMART>; |
| 278 |
ti,sysc-sidle = <SYSC_IDLE_FORCE>, |
| 279 |
<SYSC_IDLE_NO>, |
| 280 |
<SYSC_IDLE_SMART>; |
| 281 |
ti,syss-mask = <1>; |
| 282 |
/* Domains (V, P, C): core, core_pwrdm, core_l3_clkdm */ |
| 283 |
clocks = <&core_l3_ick>; |
| 284 |
clock-names = "ick"; |
| 285 |
#address-cells = <1>; |
| 286 |
#size-cells = <1>; |
| 287 |
ranges = <0 0x48056000 0x1000>; |
| 288 |
|
| 289 |
sdma: dma-controller@0 { |
| 290 |
compatible = "ti,omap3430-sdma", "ti,omap-sdma"; |
| 291 |
reg = <0x0 0x1000>; |
| 292 |
interrupts = <12>, |
| 293 |
<13>, |
| 294 |
<14>, |
| 295 |
<15>; |
| 296 |
#dma-cells = <1>; |
| 297 |
dma-channels = <32>; |
| 298 |
dma-requests = <96>; |
| 299 |
}; |
| 300 |
}; |
| 301 |
|
| 302 |
gpio1: gpio@48310000 { |
| 303 |
compatible = "ti,omap3-gpio"; |
| 304 |
reg = <0x48310000 0x200>; |
| 305 |
interrupts = <29>; |
| 306 |
ti,hwmods = "gpio1"; |
| 307 |
ti,gpio-always-on; |
| 308 |
gpio-controller; |
| 309 |
#gpio-cells = <2>; |
| 310 |
interrupt-controller; |
| 311 |
#interrupt-cells = <2>; |
| 312 |
}; |
| 313 |
|
| 314 |
gpio2: gpio@49050000 { |
| 315 |
compatible = "ti,omap3-gpio"; |
| 316 |
reg = <0x49050000 0x200>; |
| 317 |
interrupts = <30>; |
| 318 |
ti,hwmods = "gpio2"; |
| 319 |
gpio-controller; |
| 320 |
#gpio-cells = <2>; |
| 321 |
interrupt-controller; |
| 322 |
#interrupt-cells = <2>; |
| 323 |
}; |
| 324 |
|
| 325 |
gpio3: gpio@49052000 { |
| 326 |
compatible = "ti,omap3-gpio"; |
| 327 |
reg = <0x49052000 0x200>; |
| 328 |
interrupts = <31>; |
| 329 |
ti,hwmods = "gpio3"; |
| 330 |
gpio-controller; |
| 331 |
#gpio-cells = <2>; |
| 332 |
interrupt-controller; |
| 333 |
#interrupt-cells = <2>; |
| 334 |
}; |
| 335 |
|
| 336 |
gpio4: gpio@49054000 { |
| 337 |
compatible = "ti,omap3-gpio"; |
| 338 |
reg = <0x49054000 0x200>; |
| 339 |
interrupts = <32>; |
| 340 |
ti,hwmods = "gpio4"; |
| 341 |
gpio-controller; |
| 342 |
#gpio-cells = <2>; |
| 343 |
interrupt-controller; |
| 344 |
#interrupt-cells = <2>; |
| 345 |
}; |
| 346 |
|
| 347 |
gpio5: gpio@49056000 { |
| 348 |
compatible = "ti,omap3-gpio"; |
| 349 |
reg = <0x49056000 0x200>; |
| 350 |
interrupts = <33>; |
| 351 |
ti,hwmods = "gpio5"; |
| 352 |
gpio-controller; |
| 353 |
#gpio-cells = <2>; |
| 354 |
interrupt-controller; |
| 355 |
#interrupt-cells = <2>; |
| 356 |
}; |
| 357 |
|
| 358 |
gpio6: gpio@49058000 { |
| 359 |
compatible = "ti,omap3-gpio"; |
| 360 |
reg = <0x49058000 0x200>; |
| 361 |
interrupts = <34>; |
| 362 |
ti,hwmods = "gpio6"; |
| 363 |
gpio-controller; |
| 364 |
#gpio-cells = <2>; |
| 365 |
interrupt-controller; |
| 366 |
#interrupt-cells = <2>; |
| 367 |
}; |
| 368 |
|
| 369 |
uart1: serial@4806a000 { |
| 370 |
compatible = "ti,omap3-uart"; |
| 371 |
reg = <0x4806a000 0x2000>; |
| 372 |
interrupts-extended = <&intc 72>; |
| 373 |
dmas = <&sdma 49 &sdma 50>; |
| 374 |
dma-names = "tx", "rx"; |
| 375 |
ti,hwmods = "uart1"; |
| 376 |
clock-frequency = <48000000>; |
| 377 |
}; |
| 378 |
|
| 379 |
uart2: serial@4806c000 { |
| 380 |
compatible = "ti,omap3-uart"; |
| 381 |
reg = <0x4806c000 0x400>; |
| 382 |
interrupts-extended = <&intc 73>; |
| 383 |
dmas = <&sdma 51 &sdma 52>; |
| 384 |
dma-names = "tx", "rx"; |
| 385 |
ti,hwmods = "uart2"; |
| 386 |
clock-frequency = <48000000>; |
| 387 |
}; |
| 388 |
|
| 389 |
uart3: serial@49020000 { |
| 390 |
compatible = "ti,omap3-uart"; |
| 391 |
reg = <0x49020000 0x400>; |
| 392 |
interrupts-extended = <&intc 74>; |
| 393 |
dmas = <&sdma 53 &sdma 54>; |
| 394 |
dma-names = "tx", "rx"; |
| 395 |
ti,hwmods = "uart3"; |
| 396 |
clock-frequency = <48000000>; |
| 397 |
}; |
| 398 |
|
| 399 |
i2c1: i2c@48070000 { |
| 400 |
compatible = "ti,omap3-i2c"; |
| 401 |
reg = <0x48070000 0x80>; |
| 402 |
interrupts = <56>; |
| 403 |
#address-cells = <1>; |
| 404 |
#size-cells = <0>; |
| 405 |
ti,hwmods = "i2c1"; |
| 406 |
}; |
| 407 |
|
| 408 |
i2c2: i2c@48072000 { |
| 409 |
compatible = "ti,omap3-i2c"; |
| 410 |
reg = <0x48072000 0x80>; |
| 411 |
interrupts = <57>; |
| 412 |
#address-cells = <1>; |
| 413 |
#size-cells = <0>; |
| 414 |
ti,hwmods = "i2c2"; |
| 415 |
}; |
| 416 |
|
| 417 |
i2c3: i2c@48060000 { |
| 418 |
compatible = "ti,omap3-i2c"; |
| 419 |
reg = <0x48060000 0x80>; |
| 420 |
interrupts = <61>; |
| 421 |
#address-cells = <1>; |
| 422 |
#size-cells = <0>; |
| 423 |
ti,hwmods = "i2c3"; |
| 424 |
}; |
| 425 |
|
| 426 |
mailbox: mailbox@48094000 { |
| 427 |
compatible = "ti,omap3-mailbox"; |
| 428 |
ti,hwmods = "mailbox"; |
| 429 |
reg = <0x48094000 0x200>; |
| 430 |
interrupts = <26>; |
| 431 |
#mbox-cells = <1>; |
| 432 |
ti,mbox-num-users = <2>; |
| 433 |
ti,mbox-num-fifos = <2>; |
| 434 |
mbox_dsp: mbox-dsp { |
| 435 |
ti,mbox-tx = <0 0 0>; |
| 436 |
ti,mbox-rx = <1 0 0>; |
| 437 |
}; |
| 438 |
}; |
| 439 |
|
| 440 |
mcspi1: spi@48098000 { |
| 441 |
compatible = "ti,omap2-mcspi"; |
| 442 |
reg = <0x48098000 0x100>; |
| 443 |
interrupts = <65>; |
| 444 |
#address-cells = <1>; |
| 445 |
#size-cells = <0>; |
| 446 |
ti,hwmods = "mcspi1"; |
| 447 |
ti,spi-num-cs = <4>; |
| 448 |
dmas = <&sdma 35>, |
| 449 |
<&sdma 36>, |
| 450 |
<&sdma 37>, |
| 451 |
<&sdma 38>, |
| 452 |
<&sdma 39>, |
| 453 |
<&sdma 40>, |
| 454 |
<&sdma 41>, |
| 455 |
<&sdma 42>; |
| 456 |
dma-names = "tx0", "rx0", "tx1", "rx1", |
| 457 |
"tx2", "rx2", "tx3", "rx3"; |
| 458 |
}; |
| 459 |
|
| 460 |
mcspi2: spi@4809a000 { |
| 461 |
compatible = "ti,omap2-mcspi"; |
| 462 |
reg = <0x4809a000 0x100>; |
| 463 |
interrupts = <66>; |
| 464 |
#address-cells = <1>; |
| 465 |
#size-cells = <0>; |
| 466 |
ti,hwmods = "mcspi2"; |
| 467 |
ti,spi-num-cs = <2>; |
| 468 |
dmas = <&sdma 43>, |
| 469 |
<&sdma 44>, |
| 470 |
<&sdma 45>, |
| 471 |
<&sdma 46>; |
| 472 |
dma-names = "tx0", "rx0", "tx1", "rx1"; |
| 473 |
}; |
| 474 |
|
| 475 |
mcspi3: spi@480b8000 { |
| 476 |
compatible = "ti,omap2-mcspi"; |
| 477 |
reg = <0x480b8000 0x100>; |
| 478 |
interrupts = <91>; |
| 479 |
#address-cells = <1>; |
| 480 |
#size-cells = <0>; |
| 481 |
ti,hwmods = "mcspi3"; |
| 482 |
ti,spi-num-cs = <2>; |
| 483 |
dmas = <&sdma 15>, |
| 484 |
<&sdma 16>, |
| 485 |
<&sdma 23>, |
| 486 |
<&sdma 24>; |
| 487 |
dma-names = "tx0", "rx0", "tx1", "rx1"; |
| 488 |
}; |
| 489 |
|
| 490 |
mcspi4: spi@480ba000 { |
| 491 |
compatible = "ti,omap2-mcspi"; |
| 492 |
reg = <0x480ba000 0x100>; |
| 493 |
interrupts = <48>; |
| 494 |
#address-cells = <1>; |
| 495 |
#size-cells = <0>; |
| 496 |
ti,hwmods = "mcspi4"; |
| 497 |
ti,spi-num-cs = <1>; |
| 498 |
dmas = <&sdma 70>, <&sdma 71>; |
| 499 |
dma-names = "tx0", "rx0"; |
| 500 |
}; |
| 501 |
|
| 502 |
hdqw1w: 1w@480b2000 { |
| 503 |
compatible = "ti,omap3-1w"; |
| 504 |
reg = <0x480b2000 0x1000>; |
| 505 |
interrupts = <58>; |
| 506 |
ti,hwmods = "hdq1w"; |
| 507 |
}; |
| 508 |
|
| 509 |
mmc1: mmc@4809c000 { |
| 510 |
compatible = "ti,omap3-hsmmc"; |
| 511 |
reg = <0x4809c000 0x200>; |
| 512 |
interrupts = <83>; |
| 513 |
ti,hwmods = "mmc1"; |
| 514 |
ti,dual-volt; |
| 515 |
dmas = <&sdma 61>, <&sdma 62>; |
| 516 |
dma-names = "tx", "rx"; |
| 517 |
pbias-supply = <&pbias_mmc_reg>; |
| 518 |
}; |
| 519 |
|
| 520 |
mmc2: mmc@480b4000 { |
| 521 |
compatible = "ti,omap3-hsmmc"; |
| 522 |
reg = <0x480b4000 0x200>; |
| 523 |
interrupts = <86>; |
| 524 |
ti,hwmods = "mmc2"; |
| 525 |
dmas = <&sdma 47>, <&sdma 48>; |
| 526 |
dma-names = "tx", "rx"; |
| 527 |
}; |
| 528 |
|
| 529 |
mmc3: mmc@480ad000 { |
| 530 |
compatible = "ti,omap3-hsmmc"; |
| 531 |
reg = <0x480ad000 0x200>; |
| 532 |
interrupts = <94>; |
| 533 |
ti,hwmods = "mmc3"; |
| 534 |
dmas = <&sdma 77>, <&sdma 78>; |
| 535 |
dma-names = "tx", "rx"; |
| 536 |
}; |
| 537 |
|
| 538 |
mmu_isp: mmu@480bd400 { |
| 539 |
#iommu-cells = <0>; |
| 540 |
compatible = "ti,omap2-iommu"; |
| 541 |
reg = <0x480bd400 0x80>; |
| 542 |
interrupts = <24>; |
| 543 |
ti,hwmods = "mmu_isp"; |
| 544 |
ti,#tlb-entries = <8>; |
| 545 |
}; |
| 546 |
|
| 547 |
mmu_iva: mmu@5d000000 { |
| 548 |
#iommu-cells = <0>; |
| 549 |
compatible = "ti,omap2-iommu"; |
| 550 |
reg = <0x5d000000 0x80>; |
| 551 |
interrupts = <28>; |
| 552 |
ti,hwmods = "mmu_iva"; |
| 553 |
status = "disabled"; |
| 554 |
}; |
| 555 |
|
| 556 |
wdt2: watchdog@48314000 { |
| 557 |
compatible = "ti,omap3-wdt"; |
| 558 |
reg = <0x48314000 0x80>; |
| 559 |
ti,hwmods = "wd_timer2"; |
| 560 |
}; |
| 561 |
|
| 562 |
mcbsp1: mcbsp@48074000 { |
| 563 |
compatible = "ti,omap3-mcbsp"; |
| 564 |
reg = <0x48074000 0xff>; |
| 565 |
reg-names = "mpu"; |
| 566 |
interrupts = <16>, /* OCP compliant interrupt */ |
| 567 |
<59>, /* TX interrupt */ |
| 568 |
<60>; /* RX interrupt */ |
| 569 |
interrupt-names = "common", "tx", "rx"; |
| 570 |
ti,buffer-size = <128>; |
| 571 |
ti,hwmods = "mcbsp1"; |
| 572 |
dmas = <&sdma 31>, |
| 573 |
<&sdma 32>; |
| 574 |
dma-names = "tx", "rx"; |
| 575 |
clocks = <&mcbsp1_fck>; |
| 576 |
clock-names = "fck"; |
| 577 |
status = "disabled"; |
| 578 |
}; |
| 579 |
|
| 580 |
/* Likely needs to be tagged disabled on HS devices */ |
| 581 |
rng_target: target-module@480a0000 { |
| 582 |
compatible = "ti,sysc-omap2", "ti,sysc"; |
| 583 |
reg = <0x480a003c 0x4>, |
| 584 |
<0x480a0040 0x4>, |
| 585 |
<0x480a0044 0x4>; |
| 586 |
reg-names = "rev", "sysc", "syss"; |
| 587 |
ti,sysc-mask = <(SYSC_OMAP2_AUTOIDLE)>; |
| 588 |
ti,sysc-sidle = <SYSC_IDLE_FORCE>, |
| 589 |
<SYSC_IDLE_NO>; |
| 590 |
ti,syss-mask = <1>; |
| 591 |
clocks = <&rng_ick>; |
| 592 |
clock-names = "ick"; |
| 593 |
#address-cells = <1>; |
| 594 |
#size-cells = <1>; |
| 595 |
ranges = <0 0x480a0000 0x2000>; |
| 596 |
|
| 597 |
rng: rng@0 { |
| 598 |
compatible = "ti,omap2-rng"; |
| 599 |
reg = <0x0 0x2000>; |
| 600 |
interrupts = <52>; |
| 601 |
}; |
| 602 |
}; |
| 603 |
|
| 604 |
mcbsp2: mcbsp@49022000 { |
| 605 |
compatible = "ti,omap3-mcbsp"; |
| 606 |
reg = <0x49022000 0xff>, |
| 607 |
<0x49028000 0xff>; |
| 608 |
reg-names = "mpu", "sidetone"; |
| 609 |
interrupts = <17>, /* OCP compliant interrupt */ |
| 610 |
<62>, /* TX interrupt */ |
| 611 |
<63>, /* RX interrupt */ |
| 612 |
<4>; /* Sidetone */ |
| 613 |
interrupt-names = "common", "tx", "rx", "sidetone"; |
| 614 |
ti,buffer-size = <1280>; |
| 615 |
ti,hwmods = "mcbsp2", "mcbsp2_sidetone"; |
| 616 |
dmas = <&sdma 33>, |
| 617 |
<&sdma 34>; |
| 618 |
dma-names = "tx", "rx"; |
| 619 |
clocks = <&mcbsp2_fck>, <&mcbsp2_ick>; |
| 620 |
clock-names = "fck", "ick"; |
| 621 |
status = "disabled"; |
| 622 |
}; |
| 623 |
|
| 624 |
mcbsp3: mcbsp@49024000 { |
| 625 |
compatible = "ti,omap3-mcbsp"; |
| 626 |
reg = <0x49024000 0xff>, |
| 627 |
<0x4902a000 0xff>; |
| 628 |
reg-names = "mpu", "sidetone"; |
| 629 |
interrupts = <22>, /* OCP compliant interrupt */ |
| 630 |
<89>, /* TX interrupt */ |
| 631 |
<90>, /* RX interrupt */ |
| 632 |
<5>; /* Sidetone */ |
| 633 |
interrupt-names = "common", "tx", "rx", "sidetone"; |
| 634 |
ti,buffer-size = <128>; |
| 635 |
ti,hwmods = "mcbsp3", "mcbsp3_sidetone"; |
| 636 |
dmas = <&sdma 17>, |
| 637 |
<&sdma 18>; |
| 638 |
dma-names = "tx", "rx"; |
| 639 |
clocks = <&mcbsp3_fck>, <&mcbsp3_ick>; |
| 640 |
clock-names = "fck", "ick"; |
| 641 |
status = "disabled"; |
| 642 |
}; |
| 643 |
|
| 644 |
mcbsp4: mcbsp@49026000 { |
| 645 |
compatible = "ti,omap3-mcbsp"; |
| 646 |
reg = <0x49026000 0xff>; |
| 647 |
reg-names = "mpu"; |
| 648 |
interrupts = <23>, /* OCP compliant interrupt */ |
| 649 |
<54>, /* TX interrupt */ |
| 650 |
<55>; /* RX interrupt */ |
| 651 |
interrupt-names = "common", "tx", "rx"; |
| 652 |
ti,buffer-size = <128>; |
| 653 |
ti,hwmods = "mcbsp4"; |
| 654 |
dmas = <&sdma 19>, |
| 655 |
<&sdma 20>; |
| 656 |
dma-names = "tx", "rx"; |
| 657 |
clocks = <&mcbsp4_fck>; |
| 658 |
clock-names = "fck"; |
| 659 |
#sound-dai-cells = <0>; |
| 660 |
status = "disabled"; |
| 661 |
}; |
| 662 |
|
| 663 |
mcbsp5: mcbsp@48096000 { |
| 664 |
compatible = "ti,omap3-mcbsp"; |
| 665 |
reg = <0x48096000 0xff>; |
| 666 |
reg-names = "mpu"; |
| 667 |
interrupts = <27>, /* OCP compliant interrupt */ |
| 668 |
<81>, /* TX interrupt */ |
| 669 |
<82>; /* RX interrupt */ |
| 670 |
interrupt-names = "common", "tx", "rx"; |
| 671 |
ti,buffer-size = <128>; |
| 672 |
ti,hwmods = "mcbsp5"; |
| 673 |
dmas = <&sdma 21>, |
| 674 |
<&sdma 22>; |
| 675 |
dma-names = "tx", "rx"; |
| 676 |
clocks = <&mcbsp5_fck>; |
| 677 |
clock-names = "fck"; |
| 678 |
status = "disabled"; |
| 679 |
}; |
| 680 |
|
| 681 |
sham: sham@480c3000 { |
| 682 |
compatible = "ti,omap3-sham"; |
| 683 |
ti,hwmods = "sham"; |
| 684 |
reg = <0x480c3000 0x64>; |
| 685 |
interrupts = <49>; |
| 686 |
dmas = <&sdma 69>; |
| 687 |
dma-names = "rx"; |
| 688 |
}; |
| 689 |
|
| 690 |
timer1_target: target-module@48318000 { |
| 691 |
compatible = "ti,sysc-omap2-timer", "ti,sysc"; |
| 692 |
reg = <0x48318000 0x4>, |
| 693 |
<0x48318010 0x4>, |
| 694 |
<0x48318014 0x4>; |
| 695 |
reg-names = "rev", "sysc", "syss"; |
| 696 |
ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY | |
| 697 |
SYSC_OMAP2_EMUFREE | |
| 698 |
SYSC_OMAP2_ENAWAKEUP | |
| 699 |
SYSC_OMAP2_SOFTRESET | |
| 700 |
SYSC_OMAP2_AUTOIDLE)>; |
| 701 |
ti,sysc-sidle = <SYSC_IDLE_FORCE>, |
| 702 |
<SYSC_IDLE_NO>, |
| 703 |
<SYSC_IDLE_SMART>; |
| 704 |
ti,syss-mask = <1>; |
| 705 |
clocks = <&gpt1_fck>, <&gpt1_ick>; |
| 706 |
clock-names = "fck", "ick"; |
| 707 |
#address-cells = <1>; |
| 708 |
#size-cells = <1>; |
| 709 |
ranges = <0x0 0x48318000 0x1000>; |
| 710 |
|
| 711 |
timer1: timer@0 { |
| 712 |
compatible = "ti,omap3430-timer"; |
| 713 |
reg = <0x0 0x80>; |
| 714 |
clocks = <&gpt1_fck>; |
| 715 |
clock-names = "fck"; |
| 716 |
interrupts = <37>; |
| 717 |
ti,timer-alwon; |
| 718 |
}; |
| 719 |
}; |
| 720 |
|
| 721 |
timer2_target: target-module@49032000 { |
| 722 |
compatible = "ti,sysc-omap2-timer", "ti,sysc"; |
| 723 |
reg = <0x49032000 0x4>, |
| 724 |
<0x49032010 0x4>, |
| 725 |
<0x49032014 0x4>; |
| 726 |
reg-names = "rev", "sysc", "syss"; |
| 727 |
ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY | |
| 728 |
SYSC_OMAP2_EMUFREE | |
| 729 |
SYSC_OMAP2_ENAWAKEUP | |
| 730 |
SYSC_OMAP2_SOFTRESET | |
| 731 |
SYSC_OMAP2_AUTOIDLE)>; |
| 732 |
ti,sysc-sidle = <SYSC_IDLE_FORCE>, |
| 733 |
<SYSC_IDLE_NO>, |
| 734 |
<SYSC_IDLE_SMART>; |
| 735 |
ti,syss-mask = <1>; |
| 736 |
clocks = <&gpt2_fck>, <&gpt2_ick>; |
| 737 |
clock-names = "fck", "ick"; |
| 738 |
#address-cells = <1>; |
| 739 |
#size-cells = <1>; |
| 740 |
ranges = <0x0 0x49032000 0x1000>; |
| 741 |
|
| 742 |
timer2: timer@0 { |
| 743 |
compatible = "ti,omap3430-timer"; |
| 744 |
reg = <0 0x400>; |
| 745 |
interrupts = <38>; |
| 746 |
}; |
| 747 |
}; |
| 748 |
|
| 749 |
timer3: timer@49034000 { |
| 750 |
compatible = "ti,omap3430-timer"; |
| 751 |
reg = <0x49034000 0x400>; |
| 752 |
interrupts = <39>; |
| 753 |
ti,hwmods = "timer3"; |
| 754 |
}; |
| 755 |
|
| 756 |
timer4: timer@49036000 { |
| 757 |
compatible = "ti,omap3430-timer"; |
| 758 |
reg = <0x49036000 0x400>; |
| 759 |
interrupts = <40>; |
| 760 |
ti,hwmods = "timer4"; |
| 761 |
}; |
| 762 |
|
| 763 |
timer5: timer@49038000 { |
| 764 |
compatible = "ti,omap3430-timer"; |
| 765 |
reg = <0x49038000 0x400>; |
| 766 |
interrupts = <41>; |
| 767 |
ti,hwmods = "timer5"; |
| 768 |
ti,timer-dsp; |
| 769 |
}; |
| 770 |
|
| 771 |
timer6: timer@4903a000 { |
| 772 |
compatible = "ti,omap3430-timer"; |
| 773 |
reg = <0x4903a000 0x400>; |
| 774 |
interrupts = <42>; |
| 775 |
ti,hwmods = "timer6"; |
| 776 |
ti,timer-dsp; |
| 777 |
}; |
| 778 |
|
| 779 |
timer7: timer@4903c000 { |
| 780 |
compatible = "ti,omap3430-timer"; |
| 781 |
reg = <0x4903c000 0x400>; |
| 782 |
interrupts = <43>; |
| 783 |
ti,hwmods = "timer7"; |
| 784 |
ti,timer-dsp; |
| 785 |
}; |
| 786 |
|
| 787 |
timer8: timer@4903e000 { |
| 788 |
compatible = "ti,omap3430-timer"; |
| 789 |
reg = <0x4903e000 0x400>; |
| 790 |
interrupts = <44>; |
| 791 |
ti,hwmods = "timer8"; |
| 792 |
ti,timer-pwm; |
| 793 |
ti,timer-dsp; |
| 794 |
}; |
| 795 |
|
| 796 |
timer9: timer@49040000 { |
| 797 |
compatible = "ti,omap3430-timer"; |
| 798 |
reg = <0x49040000 0x400>; |
| 799 |
interrupts = <45>; |
| 800 |
ti,hwmods = "timer9"; |
| 801 |
ti,timer-pwm; |
| 802 |
}; |
| 803 |
|
| 804 |
timer10: timer@48086000 { |
| 805 |
compatible = "ti,omap3430-timer"; |
| 806 |
reg = <0x48086000 0x400>; |
| 807 |
interrupts = <46>; |
| 808 |
ti,hwmods = "timer10"; |
| 809 |
ti,timer-pwm; |
| 810 |
}; |
| 811 |
|
| 812 |
timer11: timer@48088000 { |
| 813 |
compatible = "ti,omap3430-timer"; |
| 814 |
reg = <0x48088000 0x400>; |
| 815 |
interrupts = <47>; |
| 816 |
ti,hwmods = "timer11"; |
| 817 |
ti,timer-pwm; |
| 818 |
}; |
| 819 |
|
| 820 |
timer12_target: target-module@48304000 { |
| 821 |
compatible = "ti,sysc-omap2-timer", "ti,sysc"; |
| 822 |
reg = <0x48304000 0x4>, |
| 823 |
<0x48304010 0x4>, |
| 824 |
<0x48304014 0x4>; |
| 825 |
reg-names = "rev", "sysc", "syss"; |
| 826 |
ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY | |
| 827 |
SYSC_OMAP2_EMUFREE | |
| 828 |
SYSC_OMAP2_ENAWAKEUP | |
| 829 |
SYSC_OMAP2_SOFTRESET | |
| 830 |
SYSC_OMAP2_AUTOIDLE)>; |
| 831 |
ti,sysc-sidle = <SYSC_IDLE_FORCE>, |
| 832 |
<SYSC_IDLE_NO>, |
| 833 |
<SYSC_IDLE_SMART>; |
| 834 |
ti,syss-mask = <1>; |
| 835 |
clocks = <&gpt12_fck>, <&gpt12_ick>; |
| 836 |
clock-names = "fck", "ick"; |
| 837 |
#address-cells = <1>; |
| 838 |
#size-cells = <1>; |
| 839 |
ranges = <0x0 0x48304000 0x1000>; |
| 840 |
|
| 841 |
timer12: timer@0 { |
| 842 |
compatible = "ti,omap3430-timer"; |
| 843 |
reg = <0 0x400>; |
| 844 |
interrupts = <95>; |
| 845 |
ti,timer-alwon; |
| 846 |
ti,timer-secure; |
| 847 |
}; |
| 848 |
}; |
| 849 |
|
| 850 |
usbhstll: usbhstll@48062000 { |
| 851 |
compatible = "ti,usbhs-tll"; |
| 852 |
reg = <0x48062000 0x1000>; |
| 853 |
interrupts = <78>; |
| 854 |
ti,hwmods = "usb_tll_hs"; |
| 855 |
}; |
| 856 |
|
| 857 |
usbhshost: usbhshost@48064000 { |
| 858 |
compatible = "ti,usbhs-host"; |
| 859 |
reg = <0x48064000 0x400>; |
| 860 |
ti,hwmods = "usb_host_hs"; |
| 861 |
#address-cells = <1>; |
| 862 |
#size-cells = <1>; |
| 863 |
ranges; |
| 864 |
|
| 865 |
usbhsohci: usb@48064400 { |
| 866 |
compatible = "ti,ohci-omap3"; |
| 867 |
reg = <0x48064400 0x400>; |
| 868 |
interrupts = <76>; |
| 869 |
remote-wakeup-connected; |
| 870 |
}; |
| 871 |
|
| 872 |
usbhsehci: usb@48064800 { |
| 873 |
compatible = "ti,ehci-omap"; |
| 874 |
reg = <0x48064800 0x400>; |
| 875 |
interrupts = <77>; |
| 876 |
}; |
| 877 |
}; |
| 878 |
|
| 879 |
gpmc: gpmc@6e000000 { |
| 880 |
compatible = "ti,omap3430-gpmc"; |
| 881 |
ti,hwmods = "gpmc"; |
| 882 |
reg = <0x6e000000 0x02d0>; |
| 883 |
interrupts = <20>; |
| 884 |
dmas = <&sdma 4>; |
| 885 |
dma-names = "rxtx"; |
| 886 |
gpmc,num-cs = <8>; |
| 887 |
gpmc,num-waitpins = <4>; |
| 888 |
#address-cells = <2>; |
| 889 |
#size-cells = <1>; |
| 890 |
interrupt-controller; |
| 891 |
#interrupt-cells = <2>; |
| 892 |
gpio-controller; |
| 893 |
#gpio-cells = <2>; |
| 894 |
}; |
| 895 |
|
| 896 |
usb_otg_target: target-module@480ab000 { |
| 897 |
compatible = "ti,sysc-omap2", "ti,sysc"; |
| 898 |
reg = <0x480ab400 0x4>, |
| 899 |
<0x480ab404 0x4>, |
| 900 |
<0x480ab408 0x4>; |
| 901 |
reg-names = "rev", "sysc", "syss"; |
| 902 |
ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP | |
| 903 |
SYSC_OMAP2_SOFTRESET | |
| 904 |
SYSC_OMAP2_AUTOIDLE)>; |
| 905 |
ti,sysc-midle = <SYSC_IDLE_FORCE>, |
| 906 |
<SYSC_IDLE_NO>, |
| 907 |
<SYSC_IDLE_SMART>; |
| 908 |
ti,sysc-sidle = <SYSC_IDLE_FORCE>, |
| 909 |
<SYSC_IDLE_NO>, |
| 910 |
<SYSC_IDLE_SMART>; |
| 911 |
ti,syss-mask = <1>; |
| 912 |
/* Clock defined in the SoC specific dtsi file */ |
| 913 |
clock-names = "fck"; |
| 914 |
#address-cells = <1>; |
| 915 |
#size-cells = <1>; |
| 916 |
ranges = <0x0 0x480ab000 0x1000>; |
| 917 |
|
| 918 |
usb_otg_hs: usb@0 { |
| 919 |
compatible = "ti,omap3-musb"; |
| 920 |
reg = <0 0x1000>; |
| 921 |
interrupts = <92>, <93>; |
| 922 |
interrupt-names = "mc", "dma"; |
| 923 |
multipoint = <1>; |
| 924 |
num-eps = <16>; |
| 925 |
ram-bits = <12>; |
| 926 |
}; |
| 927 |
}; |
| 928 |
|
| 929 |
dss: dss@48050000 { |
| 930 |
compatible = "ti,omap3-dss"; |
| 931 |
reg = <0x48050000 0x200>; |
| 932 |
status = "disabled"; |
| 933 |
ti,hwmods = "dss_core"; |
| 934 |
clocks = <&dss1_alwon_fck>; |
| 935 |
clock-names = "fck"; |
| 936 |
#address-cells = <1>; |
| 937 |
#size-cells = <1>; |
| 938 |
ranges; |
| 939 |
|
| 940 |
dispc@48050400 { |
| 941 |
compatible = "ti,omap3-dispc"; |
| 942 |
reg = <0x48050400 0x400>; |
| 943 |
interrupts = <25>; |
| 944 |
ti,hwmods = "dss_dispc"; |
| 945 |
clocks = <&dss1_alwon_fck>; |
| 946 |
clock-names = "fck"; |
| 947 |
}; |
| 948 |
|
| 949 |
dsi: encoder@4804fc00 { |
| 950 |
compatible = "ti,omap3-dsi"; |
| 951 |
reg = <0x4804fc00 0x200>, |
| 952 |
<0x4804fe00 0x40>, |
| 953 |
<0x4804ff00 0x20>; |
| 954 |
reg-names = "proto", "phy", "pll"; |
| 955 |
interrupts = <25>; |
| 956 |
status = "disabled"; |
| 957 |
ti,hwmods = "dss_dsi1"; |
| 958 |
clocks = <&dss1_alwon_fck>, <&dss2_alwon_fck>; |
| 959 |
clock-names = "fck", "sys_clk"; |
| 960 |
|
| 961 |
#address-cells = <1>; |
| 962 |
#size-cells = <0>; |
| 963 |
}; |
| 964 |
|
| 965 |
rfbi: encoder@48050800 { |
| 966 |
compatible = "ti,omap3-rfbi"; |
| 967 |
reg = <0x48050800 0x100>; |
| 968 |
status = "disabled"; |
| 969 |
ti,hwmods = "dss_rfbi"; |
| 970 |
clocks = <&dss1_alwon_fck>, <&dss_ick>; |
| 971 |
clock-names = "fck", "ick"; |
| 972 |
}; |
| 973 |
|
| 974 |
venc: encoder@48050c00 { |
| 975 |
compatible = "ti,omap3-venc"; |
| 976 |
reg = <0x48050c00 0x100>; |
| 977 |
status = "disabled"; |
| 978 |
ti,hwmods = "dss_venc"; |
| 979 |
clocks = <&dss_tv_fck>; |
| 980 |
clock-names = "fck"; |
| 981 |
}; |
| 982 |
}; |
| 983 |
|
| 984 |
ssi: ssi-controller@48058000 { |
| 985 |
compatible = "ti,omap3-ssi"; |
| 986 |
ti,hwmods = "ssi"; |
| 987 |
|
| 988 |
status = "disabled"; |
| 989 |
|
| 990 |
reg = <0x48058000 0x1000>, |
| 991 |
<0x48059000 0x1000>; |
| 992 |
reg-names = "sys", |
| 993 |
"gdd"; |
| 994 |
|
| 995 |
interrupts = <71>; |
| 996 |
interrupt-names = "gdd_mpu"; |
| 997 |
|
| 998 |
#address-cells = <1>; |
| 999 |
#size-cells = <1>; |
| 1000 |
ranges; |
| 1001 |
|
| 1002 |
ssi_port1: ssi-port@4805a000 { |
| 1003 |
compatible = "ti,omap3-ssi-port"; |
| 1004 |
|
| 1005 |
reg = <0x4805a000 0x800>, |
| 1006 |
<0x4805a800 0x800>; |
| 1007 |
reg-names = "tx", |
| 1008 |
"rx"; |
| 1009 |
|
| 1010 |
interrupts = <67>, |
| 1011 |
<68>; |
| 1012 |
}; |
| 1013 |
|
| 1014 |
ssi_port2: ssi-port@4805b000 { |
| 1015 |
compatible = "ti,omap3-ssi-port"; |
| 1016 |
|
| 1017 |
reg = <0x4805b000 0x800>, |
| 1018 |
<0x4805b800 0x800>; |
| 1019 |
reg-names = "tx", |
| 1020 |
"rx"; |
| 1021 |
|
| 1022 |
interrupts = <69>, |
| 1023 |
<70>; |
| 1024 |
}; |
| 1025 |
}; |
| 1026 |
}; |
| 1027 |
}; |
| 1028 |
|
| 1029 |
#include "omap3xxx-clocks.dtsi" |
| 1030 |
|
| 1031 |
/* Preferred always-on timer for clockevent. Some boards must use dmtimer12 */ |
| 1032 |
&timer1_target { |
| 1033 |
ti,no-reset-on-init; |
| 1034 |
ti,no-idle; |
| 1035 |
timer@0 { |
| 1036 |
assigned-clocks = <&gpt1_fck>; |
| 1037 |
assigned-clock-parents = <&omap_32k_fck>; |
| 1038 |
}; |
| 1039 |
}; |