| 1 |
// SPDX-License-Identifier: GPL-2.0 |
| 2 |
/* |
| 3 |
* Common features on the Zoom debug board |
| 4 |
*/ |
| 5 |
|
| 6 |
#include "omap-gpmc-smsc911x.dtsi" |
| 7 |
|
| 8 |
&gpmc { |
| 9 |
ranges = <3 0 0x10000000 0x1000000>, /* CS3: 16MB for UART */ |
| 10 |
<7 0 0x2c000000 0x01000000>; |
| 11 |
|
| 12 |
/* |
| 13 |
* Four port TL16CP754C serial port on GPMC, |
| 14 |
* they probably share the same GPIO IRQ |
| 15 |
* REVISIT: Add timing support from slls644g.pdf |
| 16 |
*/ |
| 17 |
serial@3,0 { |
| 18 |
compatible = "ns16550a"; |
| 19 |
reg = <3 0 8>; /* CS3, offset 0, IO size 8 */ |
| 20 |
bank-width = <2>; |
| 21 |
reg-shift = <1>; |
| 22 |
reg-io-width = <1>; |
| 23 |
interrupt-parent = <&gpio4>; |
| 24 |
interrupts = <6 IRQ_TYPE_EDGE_RISING>; /* gpio102 */ |
| 25 |
clock-frequency = <1843200>; |
| 26 |
current-speed = <115200>; |
| 27 |
gpmc,mux-add-data = <0>; |
| 28 |
gpmc,device-width = <1>; |
| 29 |
gpmc,wait-pin = <1>; |
| 30 |
gpmc,cycle2cycle-samecsen; |
| 31 |
gpmc,cycle2cycle-diffcsen; |
| 32 |
gpmc,cs-on-ns = <5>; |
| 33 |
gpmc,cs-rd-off-ns = <155>; |
| 34 |
gpmc,cs-wr-off-ns = <155>; |
| 35 |
gpmc,adv-on-ns = <15>; |
| 36 |
gpmc,adv-rd-off-ns = <40>; |
| 37 |
gpmc,adv-wr-off-ns = <40>; |
| 38 |
gpmc,oe-on-ns = <45>; |
| 39 |
gpmc,oe-off-ns = <145>; |
| 40 |
gpmc,we-on-ns = <45>; |
| 41 |
gpmc,we-off-ns = <145>; |
| 42 |
gpmc,rd-cycle-ns = <155>; |
| 43 |
gpmc,wr-cycle-ns = <155>; |
| 44 |
gpmc,access-ns = <145>; |
| 45 |
gpmc,page-burst-access-ns = <20>; |
| 46 |
gpmc,bus-turnaround-ns = <20>; |
| 47 |
gpmc,cycle2cycle-delay-ns = <20>; |
| 48 |
gpmc,wait-monitoring-ns = <0>; |
| 49 |
gpmc,clk-activation-ns = <0>; |
| 50 |
gpmc,wr-data-mux-bus-ns = <45>; |
| 51 |
gpmc,wr-access-ns = <145>; |
| 52 |
}; |
| 53 |
serial@3,1 { |
| 54 |
compatible = "ns16550a"; |
| 55 |
reg = <3 0x100 8>; /* CS3, offset 0x100, IO size 8 */ |
| 56 |
bank-width = <2>; |
| 57 |
reg-shift = <1>; |
| 58 |
reg-io-width = <1>; |
| 59 |
interrupt-parent = <&gpio4>; |
| 60 |
interrupts = <6 IRQ_TYPE_EDGE_RISING>; /* gpio102 */ |
| 61 |
clock-frequency = <1843200>; |
| 62 |
current-speed = <115200>; |
| 63 |
}; |
| 64 |
serial@3,2 { |
| 65 |
compatible = "ns16550a"; |
| 66 |
reg = <3 0x200 8>; /* CS3, offset 0x200, IO size 8 */ |
| 67 |
bank-width = <2>; |
| 68 |
reg-shift = <1>; |
| 69 |
reg-io-width = <1>; |
| 70 |
interrupt-parent = <&gpio4>; |
| 71 |
interrupts = <6 IRQ_TYPE_EDGE_RISING>; /* gpio102 */ |
| 72 |
clock-frequency = <1843200>; |
| 73 |
current-speed = <115200>; |
| 74 |
}; |
| 75 |
serial@3,3 { |
| 76 |
compatible = "ns16550a"; |
| 77 |
reg = <3 0x300 8>; /* CS3, offset 0x300, IO size 8 */ |
| 78 |
bank-width = <2>; |
| 79 |
reg-shift = <1>; |
| 80 |
reg-io-width = <1>; |
| 81 |
interrupt-parent = <&gpio4>; |
| 82 |
interrupts = <6 IRQ_TYPE_EDGE_RISING>; /* gpio102 */ |
| 83 |
clock-frequency = <1843200>; |
| 84 |
current-speed = <115200>; |
| 85 |
}; |
| 86 |
|
| 87 |
ethernet@gpmc { |
| 88 |
reg = <7 0 0xff>; |
| 89 |
interrupt-parent = <&gpio5>; |
| 90 |
interrupts = <30 IRQ_TYPE_LEVEL_LOW>; /* gpio158 */ |
| 91 |
}; |
| 92 |
}; |