Debian Codegraph @

arch/arm/boot/dts/ti/omap/omap3-igep.dtsi

raw
1 // SPDX-License-Identifier: GPL-2.0-only
2 /*
3 * Common device tree for IGEP boards based on AM/DM37x
4 *
5 * Copyright (C) 2012 Javier Martinez Canillas <[email protected]>
6 * Copyright (C) 2012 Enric Balletbo i Serra <[email protected]>
7 */
8 /dts-v1/;
9
10 #include "omap36xx.dtsi"
11
12 / {
13 memory@80000000 {
14 device_type = "memory";
15 reg = <0x80000000 0x20000000>; /* 512 MB */
16 };
17
18 chosen {
19 stdout-path = &uart3;
20 };
21
22 sound {
23 compatible = "ti,omap-twl4030";
24 ti,model = "igep2";
25 ti,mcbsp = <&mcbsp2>;
26 };
27
28 vdd33: regulator-vdd33 {
29 compatible = "regulator-fixed";
30 regulator-name = "vdd33";
31 regulator-always-on;
32 };
33
34 };
35
36 &omap3_pmx_core {
37 gpmc_pins: gpmc-pins {
38 pinctrl-single,pins = <
39 /* OneNAND seems to require PIN_INPUT on clock. */
40 OMAP3_CORE1_IOPAD(0x20be, PIN_INPUT | MUX_MODE0) /* gpmc_clk.gpmc_clk */
41 >;
42 };
43
44 uart1_pins: uart1-pins {
45 pinctrl-single,pins = <
46 OMAP3_CORE1_IOPAD(0x2182, PIN_INPUT | MUX_MODE0) /* uart1_rx.uart1_rx */
47 OMAP3_CORE1_IOPAD(0x217c, PIN_OUTPUT | MUX_MODE0) /* uart1_tx.uart1_tx */
48 >;
49 };
50
51 uart3_pins: uart3-pins {
52 pinctrl-single,pins = <
53 OMAP3_CORE1_IOPAD(0x219e, PIN_INPUT | MUX_MODE0) /* uart3_rx.uart3_rx */
54 OMAP3_CORE1_IOPAD(0x21a0, PIN_OUTPUT | MUX_MODE0) /* uart3_tx.uart3_tx */
55 >;
56 };
57
58 mcbsp2_pins: mcbsp2-pins {
59 pinctrl-single,pins = <
60 OMAP3_CORE1_IOPAD(0x213c, PIN_INPUT | MUX_MODE0) /* mcbsp2_fsx.mcbsp2_fsx */
61 OMAP3_CORE1_IOPAD(0x213e, PIN_INPUT | MUX_MODE0) /* mcbsp2_clkx.mcbsp2_clkx */
62 OMAP3_CORE1_IOPAD(0x2140, PIN_INPUT | MUX_MODE0) /* mcbsp2_dr.mcbsp2.dr */
63 OMAP3_CORE1_IOPAD(0x2142, PIN_OUTPUT | MUX_MODE0) /* mcbsp2_dx.mcbsp2_dx */
64 >;
65 };
66
67 mmc1_pins: mmc1-pins {
68 pinctrl-single,pins = <
69 OMAP3_CORE1_IOPAD(0x2144, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_clk.sdmmc1_clk */
70 OMAP3_CORE1_IOPAD(0x2146, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_cmd.sdmmc1_cmd */
71 OMAP3_CORE1_IOPAD(0x2148, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat0.sdmmc1_dat0 */
72 OMAP3_CORE1_IOPAD(0x214a, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat1.sdmmc1_dat1 */
73 OMAP3_CORE1_IOPAD(0x214c, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat2.sdmmc1_dat2 */
74 OMAP3_CORE1_IOPAD(0x214e, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat3.sdmmc1_dat3 */
75 >;
76 };
77
78 mmc2_pins: mmc2-pins {
79 pinctrl-single,pins = <
80 OMAP3_CORE1_IOPAD(0x2158, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_clk.sdmmc2_clk */
81 OMAP3_CORE1_IOPAD(0x215a, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_cmd.sdmmc2_cmd */
82 OMAP3_CORE1_IOPAD(0x215c, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat0.sdmmc2_dat0 */
83 OMAP3_CORE1_IOPAD(0x215e, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat1.sdmmc2_dat1 */
84 OMAP3_CORE1_IOPAD(0x2160, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat2.sdmmc2_dat2 */
85 OMAP3_CORE1_IOPAD(0x2162, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat3.sdmmc2_dat3 */
86 >;
87 };
88
89 i2c1_pins: i2c1-pins {
90 pinctrl-single,pins = <
91 OMAP3_CORE1_IOPAD(0x21ba, PIN_INPUT | MUX_MODE0) /* i2c1_scl.i2c1_scl */
92 OMAP3_CORE1_IOPAD(0x21bc, PIN_INPUT | MUX_MODE0) /* i2c1_sda.i2c1_sda */
93 >;
94 };
95
96 i2c3_pins: i2c3-pins {
97 pinctrl-single,pins = <
98 OMAP3_CORE1_IOPAD(0x21c2, PIN_INPUT | MUX_MODE0) /* i2c3_scl.i2c3_scl */
99 OMAP3_CORE1_IOPAD(0x21c4, PIN_INPUT | MUX_MODE0) /* i2c3_sda.i2c3_sda */
100 >;
101 };
102 };
103
104 &gpmc {
105 pinctrl-names = "default";
106 pinctrl-0 = <&gpmc_pins>;
107
108 nand@0,0 {
109 compatible = "ti,omap2-nand";
110 reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
111 interrupt-parent = <&gpmc>;
112 interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
113 <1 IRQ_TYPE_NONE>; /* termcount */
114 nand-bus-width = <16>;
115 gpmc,device-width = <2>;
116 ti,nand-ecc-opt = "bch8";
117
118 gpmc,sync-clk-ps = <0>;
119 gpmc,cs-on-ns = <0>;
120 gpmc,cs-rd-off-ns = <44>;
121 gpmc,cs-wr-off-ns = <44>;
122 gpmc,adv-on-ns = <6>;
123 gpmc,adv-rd-off-ns = <34>;
124 gpmc,adv-wr-off-ns = <44>;
125 gpmc,we-off-ns = <40>;
126 gpmc,oe-off-ns = <54>;
127 gpmc,access-ns = <64>;
128 gpmc,rd-cycle-ns = <82>;
129 gpmc,wr-cycle-ns = <82>;
130 gpmc,wr-access-ns = <40>;
131 gpmc,wr-data-mux-bus-ns = <0>;
132
133 #address-cells = <1>;
134 #size-cells = <1>;
135
136 status = "okay";
137 };
138
139 onenand@0,0 {
140 compatible = "ti,omap2-onenand";
141 reg = <0 0 0x20000>; /* CS0, offset 0, IO size 128K */
142
143 gpmc,sync-read;
144 gpmc,sync-write;
145 gpmc,burst-length = <16>;
146 gpmc,burst-wrap;
147 gpmc,burst-read;
148 gpmc,burst-write;
149 gpmc,device-width = <2>; /* GPMC_DEVWIDTH_16BIT */
150 gpmc,mux-add-data = <2>; /* GPMC_MUX_AD */
151 gpmc,cs-on-ns = <0>;
152 gpmc,cs-rd-off-ns = <96>;
153 gpmc,cs-wr-off-ns = <96>;
154 gpmc,adv-on-ns = <0>;
155 gpmc,adv-rd-off-ns = <12>;
156 gpmc,adv-wr-off-ns = <12>;
157 gpmc,oe-on-ns = <18>;
158 gpmc,oe-off-ns = <96>;
159 gpmc,we-on-ns = <0>;
160 gpmc,we-off-ns = <96>;
161 gpmc,rd-cycle-ns = <114>;
162 gpmc,wr-cycle-ns = <114>;
163 gpmc,access-ns = <90>;
164 gpmc,page-burst-access-ns = <12>;
165 gpmc,bus-turnaround-ns = <0>;
166 gpmc,cycle2cycle-delay-ns = <0>;
167 gpmc,wait-monitoring-ns = <0>;
168 gpmc,clk-activation-ns = <6>;
169 gpmc,wr-data-mux-bus-ns = <30>;
170 gpmc,wr-access-ns = <90>;
171 gpmc,sync-clk-ps = <12000>;
172
173 #address-cells = <1>;
174 #size-cells = <1>;
175
176 status = "disabled";
177 };
178 };
179
180 &i2c1 {
181 pinctrl-names = "default";
182 pinctrl-0 = <&i2c1_pins>;
183 clock-frequency = <2600000>;
184
185 twl: twl@48 {
186 reg = <0x48>;
187 interrupts = <7>; /* SYS_NIRQ cascaded to intc */
188 interrupt-parent = <&intc>;
189
190 twl_audio: audio {
191 compatible = "ti,twl4030-audio";
192 codec {
193 };
194 };
195 };
196 };
197
198 #include "twl4030.dtsi"
199 #include "twl4030_omap3.dtsi"
200
201 &i2c3 {
202 pinctrl-names = "default";
203 pinctrl-0 = <&i2c3_pins>;
204 };
205
206 &mcbsp2 {
207 pinctrl-names = "default";
208 pinctrl-0 = <&mcbsp2_pins>;
209 status = "okay";
210 };
211
212 &mmc1 {
213 pinctrl-names = "default";
214 pinctrl-0 = <&mmc1_pins>;
215 vmmc-supply = <&vmmc1>;
216 vmmc_aux-supply = <&vsim>;
217 bus-width = <4>;
218 cd-gpios = <&twl_gpio 0 GPIO_ACTIVE_LOW>;
219 };
220
221 &mmc3 {
222 status = "disabled";
223 };
224
225 &uart1 {
226 pinctrl-names = "default";
227 pinctrl-0 = <&uart1_pins>;
228 };
229
230 &uart3 {
231 pinctrl-names = "default";
232 pinctrl-0 = <&uart3_pins>;
233 };
234
235 &twl_gpio {
236 ti,use-leds;
237 };
238
239 &usb_otg_hs {
240 interface-type = <0>;
241 usb-phy = <&usb2_phy>;
242 phys = <&usb2_phy>;
243 phy-names = "usb2-phy";
244 mode = <3>;
245 power = <50>;
246 };