| 1 |
// SPDX-License-Identifier: GPL-2.0-only |
| 2 |
/* |
| 3 |
* Author: Anil Kumar <[email protected]> |
| 4 |
*/ |
| 5 |
|
| 6 |
#include <dt-bindings/input/input.h> |
| 7 |
|
| 8 |
#include "omap34xx.dtsi" |
| 9 |
/ { |
| 10 |
memory@80000000 { |
| 11 |
device_type = "memory"; |
| 12 |
reg = <0x80000000 0x10000000>; /* 256 MB */ |
| 13 |
}; |
| 14 |
|
| 15 |
leds { |
| 16 |
compatible = "gpio-leds"; |
| 17 |
|
| 18 |
led-heartbeat { |
| 19 |
label = "devkit8000::led1"; |
| 20 |
gpios = <&gpio6 26 GPIO_ACTIVE_HIGH>; /* 186 -> LED1 */ |
| 21 |
default-state = "on"; |
| 22 |
linux,default-trigger = "heartbeat"; |
| 23 |
}; |
| 24 |
|
| 25 |
led-mmc { |
| 26 |
label = "devkit8000::led2"; |
| 27 |
gpios = <&gpio6 3 GPIO_ACTIVE_HIGH>; /* 163 -> LED2 */ |
| 28 |
default-state = "on"; |
| 29 |
linux,default-trigger = "none"; |
| 30 |
}; |
| 31 |
|
| 32 |
led-usr { |
| 33 |
label = "devkit8000::led3"; |
| 34 |
gpios = <&gpio6 4 GPIO_ACTIVE_HIGH>; /* 164 -> LED3 */ |
| 35 |
default-state = "on"; |
| 36 |
linux,default-trigger = "usr"; |
| 37 |
}; |
| 38 |
|
| 39 |
led-pmu-stat { |
| 40 |
label = "devkit8000::pmu_stat"; |
| 41 |
gpios = <&twl_gpio 19 GPIO_ACTIVE_HIGH>; /* LEDB */ |
| 42 |
}; |
| 43 |
}; |
| 44 |
|
| 45 |
sound { |
| 46 |
compatible = "ti,omap-twl4030"; |
| 47 |
ti,model = "devkit8000"; |
| 48 |
|
| 49 |
ti,mcbsp = <&mcbsp2>; |
| 50 |
ti,audio-routing = |
| 51 |
"Ext Spk", "PREDRIVEL", |
| 52 |
"Ext Spk", "PREDRIVER", |
| 53 |
"MAINMIC", "Main Mic", |
| 54 |
"Main Mic", "Mic Bias 1"; |
| 55 |
}; |
| 56 |
|
| 57 |
gpio_keys { |
| 58 |
compatible = "gpio-keys"; |
| 59 |
|
| 60 |
user { |
| 61 |
label = "user"; |
| 62 |
gpios = <&gpio1 26 GPIO_ACTIVE_HIGH>; |
| 63 |
linux,code = <BTN_EXTRA>; |
| 64 |
wakeup-source; |
| 65 |
}; |
| 66 |
}; |
| 67 |
|
| 68 |
tfp410: encoder0 { |
| 69 |
compatible = "ti,tfp410"; |
| 70 |
powerdown-gpios = <&twl_gpio 7 GPIO_ACTIVE_LOW>; |
| 71 |
|
| 72 |
ports { |
| 73 |
#address-cells = <1>; |
| 74 |
#size-cells = <0>; |
| 75 |
|
| 76 |
port@0 { |
| 77 |
reg = <0>; |
| 78 |
|
| 79 |
tfp410_in: endpoint { |
| 80 |
remote-endpoint = <&dpi_dvi_out>; |
| 81 |
}; |
| 82 |
}; |
| 83 |
|
| 84 |
port@1 { |
| 85 |
reg = <1>; |
| 86 |
|
| 87 |
tfp410_out: endpoint { |
| 88 |
remote-endpoint = <&dvi_connector_in>; |
| 89 |
}; |
| 90 |
}; |
| 91 |
}; |
| 92 |
}; |
| 93 |
|
| 94 |
dvi0: connector0 { |
| 95 |
compatible = "dvi-connector"; |
| 96 |
label = "dvi"; |
| 97 |
|
| 98 |
digital; |
| 99 |
|
| 100 |
ddc-i2c-bus = <&i2c2>; |
| 101 |
|
| 102 |
port { |
| 103 |
dvi_connector_in: endpoint { |
| 104 |
remote-endpoint = <&tfp410_out>; |
| 105 |
}; |
| 106 |
}; |
| 107 |
}; |
| 108 |
|
| 109 |
tv0: connector1 { |
| 110 |
compatible = "svideo-connector"; |
| 111 |
label = "tv"; |
| 112 |
|
| 113 |
port { |
| 114 |
tv_connector_in: endpoint { |
| 115 |
remote-endpoint = <&venc_out>; |
| 116 |
}; |
| 117 |
}; |
| 118 |
}; |
| 119 |
}; |
| 120 |
|
| 121 |
&i2c1 { |
| 122 |
clock-frequency = <2600000>; |
| 123 |
|
| 124 |
twl: twl@48 { |
| 125 |
reg = <0x48>; |
| 126 |
interrupts = <7>; /* SYS_NIRQ cascaded to intc */ |
| 127 |
|
| 128 |
twl_audio: audio { |
| 129 |
compatible = "ti,twl4030-audio"; |
| 130 |
codec { |
| 131 |
}; |
| 132 |
}; |
| 133 |
}; |
| 134 |
}; |
| 135 |
|
| 136 |
&i2c2 { |
| 137 |
clock-frequency = <400000>; |
| 138 |
}; |
| 139 |
|
| 140 |
&i2c3 { |
| 141 |
status = "disabled"; |
| 142 |
}; |
| 143 |
|
| 144 |
#include "twl4030.dtsi" |
| 145 |
#include "twl4030_omap3.dtsi" |
| 146 |
|
| 147 |
&mmc1 { |
| 148 |
vmmc-supply = <&vmmc1>; |
| 149 |
vqmmc-supply = <&vsim>; |
| 150 |
bus-width = <8>; |
| 151 |
}; |
| 152 |
|
| 153 |
&mmc2 { |
| 154 |
status = "disabled"; |
| 155 |
}; |
| 156 |
|
| 157 |
&mmc3 { |
| 158 |
status = "disabled"; |
| 159 |
}; |
| 160 |
|
| 161 |
/* Unusable as clockevent because if unreliable oscillator, allow to idle */ |
| 162 |
&timer1_target { |
| 163 |
/delete-property/ti,no-reset-on-init; |
| 164 |
/delete-property/ti,no-idle; |
| 165 |
timer@0 { |
| 166 |
/delete-property/ti,timer-alwon; |
| 167 |
}; |
| 168 |
}; |
| 169 |
|
| 170 |
/* Preferred timer for clockevent */ |
| 171 |
&timer12_target { |
| 172 |
ti,no-reset-on-init; |
| 173 |
ti,no-idle; |
| 174 |
timer@0 { |
| 175 |
/* Always clocked by secure_32k_fck */ |
| 176 |
}; |
| 177 |
}; |
| 178 |
|
| 179 |
&twl_gpio { |
| 180 |
ti,use-leds; |
| 181 |
/* |
| 182 |
* pulldowns: |
| 183 |
* BIT(1), BIT(2), BIT(6), BIT(7), BIT(8), BIT(13) |
| 184 |
* BIT(15), BIT(16), BIT(17) |
| 185 |
*/ |
| 186 |
ti,pulldowns = <0x03a1c6>; |
| 187 |
}; |
| 188 |
|
| 189 |
&twl_keypad { |
| 190 |
linux,keymap = <MATRIX_KEY(0, 0, KEY_1) |
| 191 |
MATRIX_KEY(1, 0, KEY_2) |
| 192 |
MATRIX_KEY(2, 0, KEY_3) |
| 193 |
MATRIX_KEY(0, 1, KEY_4) |
| 194 |
MATRIX_KEY(1, 1, KEY_5) |
| 195 |
MATRIX_KEY(2, 1, KEY_6) |
| 196 |
MATRIX_KEY(3, 1, KEY_F5) |
| 197 |
MATRIX_KEY(0, 2, KEY_7) |
| 198 |
MATRIX_KEY(1, 2, KEY_8) |
| 199 |
MATRIX_KEY(2, 2, KEY_9) |
| 200 |
MATRIX_KEY(3, 2, KEY_F6) |
| 201 |
MATRIX_KEY(0, 3, KEY_F7) |
| 202 |
MATRIX_KEY(1, 3, KEY_0) |
| 203 |
MATRIX_KEY(2, 3, KEY_F8) |
| 204 |
MATRIX_KEY(4, 5, KEY_RESERVED) |
| 205 |
MATRIX_KEY(4, 4, KEY_VOLUMEUP) |
| 206 |
MATRIX_KEY(5, 5, KEY_VOLUMEDOWN) |
| 207 |
>; |
| 208 |
}; |
| 209 |
|
| 210 |
&wdt2 { |
| 211 |
status = "disabled"; |
| 212 |
}; |
| 213 |
|
| 214 |
&mcbsp2 { |
| 215 |
status = "okay"; |
| 216 |
}; |
| 217 |
|
| 218 |
&gpmc { |
| 219 |
ranges = <0 0 0x30000000 0x1000000 /* CS0: 16MB for NAND */ |
| 220 |
6 0 0x2c000000 0x1000000>; /* CS6: 16MB for DM9000 */ |
| 221 |
|
| 222 |
nand@0,0 { |
| 223 |
compatible = "ti,omap2-nand"; |
| 224 |
reg = <0 0 4>; /* CS0, offset 0, IO size 4 */ |
| 225 |
interrupt-parent = <&gpmc>; |
| 226 |
interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */ |
| 227 |
<1 IRQ_TYPE_NONE>; /* termcount */ |
| 228 |
nand-bus-width = <16>; |
| 229 |
gpmc,device-width = <2>; |
| 230 |
ti,nand-ecc-opt = "sw"; |
| 231 |
|
| 232 |
gpmc,sync-clk-ps = <0>; |
| 233 |
gpmc,cs-on-ns = <0>; |
| 234 |
gpmc,cs-rd-off-ns = <44>; |
| 235 |
gpmc,cs-wr-off-ns = <44>; |
| 236 |
gpmc,adv-on-ns = <6>; |
| 237 |
gpmc,adv-rd-off-ns = <34>; |
| 238 |
gpmc,adv-wr-off-ns = <44>; |
| 239 |
gpmc,we-off-ns = <40>; |
| 240 |
gpmc,oe-off-ns = <54>; |
| 241 |
gpmc,access-ns = <64>; |
| 242 |
gpmc,rd-cycle-ns = <82>; |
| 243 |
gpmc,wr-cycle-ns = <82>; |
| 244 |
gpmc,wr-access-ns = <40>; |
| 245 |
gpmc,wr-data-mux-bus-ns = <0>; |
| 246 |
|
| 247 |
#address-cells = <1>; |
| 248 |
#size-cells = <1>; |
| 249 |
|
| 250 |
x-loader@0 { |
| 251 |
label = "X-Loader"; |
| 252 |
reg = <0 0x80000>; |
| 253 |
}; |
| 254 |
|
| 255 |
bootloaders@80000 { |
| 256 |
label = "U-Boot"; |
| 257 |
reg = <0x80000 0x1e0000>; |
| 258 |
}; |
| 259 |
|
| 260 |
bootloaders_env@260000 { |
| 261 |
label = "U-Boot Env"; |
| 262 |
reg = <0x260000 0x20000>; |
| 263 |
}; |
| 264 |
|
| 265 |
kernel@280000 { |
| 266 |
label = "Kernel"; |
| 267 |
reg = <0x280000 0x400000>; |
| 268 |
}; |
| 269 |
|
| 270 |
filesystem@680000 { |
| 271 |
label = "File System"; |
| 272 |
reg = <0x680000 0xf980000>; |
| 273 |
}; |
| 274 |
}; |
| 275 |
|
| 276 |
ethernet@6,0 { |
| 277 |
compatible = "davicom,dm9000"; |
| 278 |
reg = <6 0x000 2>, |
| 279 |
<6 0x400 2>; /* CS6, offset 0 and 0x400, IO size 2 */ |
| 280 |
bank-width = <2>; |
| 281 |
interrupt-parent = <&gpio1>; |
| 282 |
interrupts = <25 IRQ_TYPE_LEVEL_LOW>; |
| 283 |
davicom,no-eeprom; |
| 284 |
|
| 285 |
gpmc,mux-add-data = <0>; |
| 286 |
gpmc,device-width = <1>; |
| 287 |
gpmc,wait-pin = <0>; |
| 288 |
gpmc,cycle2cycle-samecsen; |
| 289 |
gpmc,cycle2cycle-diffcsen; |
| 290 |
|
| 291 |
gpmc,cs-on-ns = <6>; |
| 292 |
gpmc,cs-rd-off-ns = <180>; |
| 293 |
gpmc,cs-wr-off-ns = <180>; |
| 294 |
gpmc,adv-on-ns = <0>; |
| 295 |
gpmc,adv-rd-off-ns = <18>; |
| 296 |
gpmc,adv-wr-off-ns = <48>; |
| 297 |
gpmc,oe-on-ns = <54>; |
| 298 |
gpmc,oe-off-ns = <168>; |
| 299 |
gpmc,we-on-ns = <54>; |
| 300 |
gpmc,we-off-ns = <168>; |
| 301 |
gpmc,rd-cycle-ns = <186>; |
| 302 |
gpmc,wr-cycle-ns = <186>; |
| 303 |
gpmc,access-ns = <144>; |
| 304 |
gpmc,page-burst-access-ns = <24>; |
| 305 |
gpmc,bus-turnaround-ns = <90>; |
| 306 |
gpmc,cycle2cycle-delay-ns = <90>; |
| 307 |
gpmc,wait-monitoring-ns = <0>; |
| 308 |
gpmc,clk-activation-ns = <0>; |
| 309 |
gpmc,wr-data-mux-bus-ns = <0>; |
| 310 |
gpmc,wr-access-ns = <0>; |
| 311 |
}; |
| 312 |
}; |
| 313 |
|
| 314 |
&omap3_pmx_core { |
| 315 |
dss_dpi_pins: dss-dpi-pins { |
| 316 |
pinctrl-single,pins = < |
| 317 |
OMAP3_CORE1_IOPAD(0x20d4, PIN_OUTPUT | MUX_MODE0) /* dss_pclk.dss_pclk */ |
| 318 |
OMAP3_CORE1_IOPAD(0x20d6, PIN_OUTPUT | MUX_MODE0) /* dss_hsync.dss_hsync */ |
| 319 |
OMAP3_CORE1_IOPAD(0x20d8, PIN_OUTPUT | MUX_MODE0) /* dss_vsync.dss_vsync */ |
| 320 |
OMAP3_CORE1_IOPAD(0x20da, PIN_OUTPUT | MUX_MODE0) /* dss_acbias.dss_acbias */ |
| 321 |
OMAP3_CORE1_IOPAD(0x20dc, PIN_OUTPUT | MUX_MODE0) /* dss_data0.dss_data0 */ |
| 322 |
OMAP3_CORE1_IOPAD(0x20de, PIN_OUTPUT | MUX_MODE0) /* dss_data1.dss_data1 */ |
| 323 |
OMAP3_CORE1_IOPAD(0x20e0, PIN_OUTPUT | MUX_MODE0) /* dss_data2.dss_data2 */ |
| 324 |
OMAP3_CORE1_IOPAD(0x20e2, PIN_OUTPUT | MUX_MODE0) /* dss_data3.dss_data3 */ |
| 325 |
OMAP3_CORE1_IOPAD(0x20e4, PIN_OUTPUT | MUX_MODE0) /* dss_data4.dss_data4 */ |
| 326 |
OMAP3_CORE1_IOPAD(0x20e6, PIN_OUTPUT | MUX_MODE0) /* dss_data5.dss_data5 */ |
| 327 |
OMAP3_CORE1_IOPAD(0x20e8, PIN_OUTPUT | MUX_MODE0) /* dss_data6.dss_data6 */ |
| 328 |
OMAP3_CORE1_IOPAD(0x20ea, PIN_OUTPUT | MUX_MODE0) /* dss_data7.dss_data7 */ |
| 329 |
OMAP3_CORE1_IOPAD(0x20ec, PIN_OUTPUT | MUX_MODE0) /* dss_data8.dss_data8 */ |
| 330 |
OMAP3_CORE1_IOPAD(0x20ee, PIN_OUTPUT | MUX_MODE0) /* dss_data9.dss_data9 */ |
| 331 |
OMAP3_CORE1_IOPAD(0x20f0, PIN_OUTPUT | MUX_MODE0) /* dss_data10.dss_data10 */ |
| 332 |
OMAP3_CORE1_IOPAD(0x20f2, PIN_OUTPUT | MUX_MODE0) /* dss_data11.dss_data11 */ |
| 333 |
OMAP3_CORE1_IOPAD(0x20f4, PIN_OUTPUT | MUX_MODE0) /* dss_data12.dss_data12 */ |
| 334 |
OMAP3_CORE1_IOPAD(0x20f6, PIN_OUTPUT | MUX_MODE0) /* dss_data13.dss_data13 */ |
| 335 |
OMAP3_CORE1_IOPAD(0x20f8, PIN_OUTPUT | MUX_MODE0) /* dss_data14.dss_data14 */ |
| 336 |
OMAP3_CORE1_IOPAD(0x20fa, PIN_OUTPUT | MUX_MODE0) /* dss_data15.dss_data15 */ |
| 337 |
OMAP3_CORE1_IOPAD(0x20fc, PIN_OUTPUT | MUX_MODE0) /* dss_data16.dss_data16 */ |
| 338 |
OMAP3_CORE1_IOPAD(0x20fe, PIN_OUTPUT | MUX_MODE0) /* dss_data17.dss_data17 */ |
| 339 |
OMAP3_CORE1_IOPAD(0x2100, PIN_OUTPUT | MUX_MODE0) /* dss_data18.dss_data18 */ |
| 340 |
OMAP3_CORE1_IOPAD(0x2102, PIN_OUTPUT | MUX_MODE0) /* dss_data19.dss_data19 */ |
| 341 |
OMAP3_CORE1_IOPAD(0x2104, PIN_OUTPUT | MUX_MODE0) /* dss_data20.dss_data20 */ |
| 342 |
OMAP3_CORE1_IOPAD(0x2106, PIN_OUTPUT | MUX_MODE0) /* dss_data21.dss_data21 */ |
| 343 |
OMAP3_CORE1_IOPAD(0x2108, PIN_OUTPUT | MUX_MODE0) /* dss_data22.dss_data22 */ |
| 344 |
OMAP3_CORE1_IOPAD(0x210a, PIN_OUTPUT | MUX_MODE0) /* dss_data23.dss_data23 */ |
| 345 |
>; |
| 346 |
}; |
| 347 |
}; |
| 348 |
|
| 349 |
&vpll1 { |
| 350 |
/* Needed for DSS */ |
| 351 |
regulator-name = "vdds_dsi"; |
| 352 |
|
| 353 |
regulator-min-microvolt = <1800000>; |
| 354 |
regulator-max-microvolt = <1800000>; |
| 355 |
}; |
| 356 |
|
| 357 |
&dss { |
| 358 |
status = "okay"; |
| 359 |
|
| 360 |
pinctrl-names = "default"; |
| 361 |
pinctrl-0 = <&dss_dpi_pins>; |
| 362 |
|
| 363 |
vdds_dsi-supply = <&vpll1>; |
| 364 |
vdda_dac-supply = <&vdac>; |
| 365 |
|
| 366 |
port { |
| 367 |
#address-cells = <1>; |
| 368 |
#size-cells = <0>; |
| 369 |
dpi_dvi_out: endpoint@0 { |
| 370 |
reg = <0>; |
| 371 |
remote-endpoint = <&tfp410_in>; |
| 372 |
data-lines = <24>; |
| 373 |
}; |
| 374 |
|
| 375 |
endpoint@1 { |
| 376 |
reg = <1>; |
| 377 |
}; |
| 378 |
}; |
| 379 |
}; |
| 380 |
|
| 381 |
&venc { |
| 382 |
status = "okay"; |
| 383 |
|
| 384 |
vdda-supply = <&vdac>; |
| 385 |
|
| 386 |
port { |
| 387 |
venc_out: endpoint { |
| 388 |
remote-endpoint = <&tv_connector_in>; |
| 389 |
ti,channels = <2>; |
| 390 |
}; |
| 391 |
}; |
| 392 |
}; |