| 1 |
// SPDX-License-Identifier: GPL-2.0-or-later |
| 2 |
/* |
| 3 |
* Copyright (C) 2013 Pavel Machek <[email protected]> |
| 4 |
* Copyright (C) 2013-2014 Aaro Koskinen <[email protected]> |
| 5 |
*/ |
| 6 |
|
| 7 |
/dts-v1/; |
| 8 |
|
| 9 |
#include "omap34xx.dtsi" |
| 10 |
#include <dt-bindings/input/input.h> |
| 11 |
#include <dt-bindings/leds/common.h> |
| 12 |
#include <dt-bindings/media/video-interfaces.h> |
| 13 |
|
| 14 |
/* |
| 15 |
* Default secure signed bootloader (Nokia X-Loader) does not enable L3 firewall |
| 16 |
* for omap AES HW crypto support. When linux kernel try to access memory of AES |
| 17 |
* blocks then kernel receive "Unhandled fault: external abort on non-linefetch" |
| 18 |
* and crash. Until somebody fix omap-aes.c and omap_hwmod_3xxx_data.c code (no |
| 19 |
* crash anymore) omap AES support will be disabled for all Nokia N900 devices. |
| 20 |
* There is "unofficial" version of bootloader which enables AES in L3 firewall |
| 21 |
* but it is not widely used and to prevent kernel crash rather AES is disabled. |
| 22 |
* There is also no runtime detection code if AES is disabled in L3 firewall... |
| 23 |
*/ |
| 24 |
&aes1_target { |
| 25 |
status = "disabled"; |
| 26 |
}; |
| 27 |
|
| 28 |
&aes2_target { |
| 29 |
status = "disabled"; |
| 30 |
}; |
| 31 |
|
| 32 |
/ { |
| 33 |
model = "Nokia N900"; |
| 34 |
compatible = "nokia,omap3-n900", "ti,omap3430", "ti,omap3"; |
| 35 |
|
| 36 |
aliases { |
| 37 |
i2c0; |
| 38 |
i2c1 = &i2c1; |
| 39 |
i2c2 = &i2c2; |
| 40 |
i2c3 = &i2c3; |
| 41 |
display0 = &lcd; |
| 42 |
display1 = &tv; |
| 43 |
}; |
| 44 |
|
| 45 |
cpus { |
| 46 |
cpu@0 { |
| 47 |
cpu0-supply = <&vcc>; |
| 48 |
}; |
| 49 |
}; |
| 50 |
|
| 51 |
leds { |
| 52 |
compatible = "gpio-leds"; |
| 53 |
led-heartbeat { |
| 54 |
label = "debug::sleep"; |
| 55 |
gpios = <&gpio6 2 GPIO_ACTIVE_HIGH>; /* 162 */ |
| 56 |
linux,default-trigger = "default-on"; |
| 57 |
pinctrl-names = "default"; |
| 58 |
pinctrl-0 = <&debug_leds>; |
| 59 |
}; |
| 60 |
}; |
| 61 |
|
| 62 |
memory@80000000 { |
| 63 |
device_type = "memory"; |
| 64 |
reg = <0x80000000 0x10000000>; /* 256 MB */ |
| 65 |
}; |
| 66 |
|
| 67 |
gpio_keys { |
| 68 |
compatible = "gpio-keys"; |
| 69 |
|
| 70 |
camera_lens_cover { |
| 71 |
label = "Camera Lens Cover"; |
| 72 |
gpios = <&gpio4 14 GPIO_ACTIVE_LOW>; /* 110 */ |
| 73 |
linux,input-type = <EV_SW>; |
| 74 |
linux,code = <SW_CAMERA_LENS_COVER>; |
| 75 |
linux,can-disable; |
| 76 |
}; |
| 77 |
|
| 78 |
camera_focus { |
| 79 |
label = "Camera Focus"; |
| 80 |
gpios = <&gpio3 4 GPIO_ACTIVE_LOW>; /* 68 */ |
| 81 |
linux,code = <KEY_CAMERA_FOCUS>; |
| 82 |
linux,can-disable; |
| 83 |
}; |
| 84 |
|
| 85 |
camera_capture { |
| 86 |
label = "Camera Capture"; |
| 87 |
gpios = <&gpio3 5 GPIO_ACTIVE_LOW>; /* 69 */ |
| 88 |
linux,code = <KEY_CAMERA>; |
| 89 |
linux,can-disable; |
| 90 |
}; |
| 91 |
|
| 92 |
lock_button { |
| 93 |
label = "Lock Button"; |
| 94 |
gpios = <&gpio4 17 GPIO_ACTIVE_LOW>; /* 113 */ |
| 95 |
linux,code = <KEY_SCREENLOCK>; |
| 96 |
linux,can-disable; |
| 97 |
}; |
| 98 |
|
| 99 |
keypad_slide { |
| 100 |
label = "Keypad Slide"; |
| 101 |
gpios = <&gpio3 7 GPIO_ACTIVE_LOW>; /* 71 */ |
| 102 |
linux,input-type = <EV_SW>; |
| 103 |
linux,code = <SW_KEYPAD_SLIDE>; |
| 104 |
linux,can-disable; |
| 105 |
}; |
| 106 |
|
| 107 |
proximity_sensor { |
| 108 |
label = "Proximity Sensor"; |
| 109 |
gpios = <&gpio3 25 GPIO_ACTIVE_HIGH>; /* 89 */ |
| 110 |
linux,input-type = <EV_SW>; |
| 111 |
linux,code = <SW_FRONT_PROXIMITY>; |
| 112 |
linux,can-disable; |
| 113 |
}; |
| 114 |
|
| 115 |
machine_cover { |
| 116 |
label = "Machine Cover"; |
| 117 |
gpios = <&gpio6 0 GPIO_ACTIVE_LOW>; /* 160 */ |
| 118 |
linux,input-type = <EV_SW>; |
| 119 |
linux,code = <SW_MACHINE_COVER>; |
| 120 |
linux,can-disable; |
| 121 |
}; |
| 122 |
}; |
| 123 |
|
| 124 |
isp1707: isp1707 { |
| 125 |
compatible = "nxp,isp1707"; |
| 126 |
nxp,enable-gpio = <&gpio3 3 GPIO_ACTIVE_HIGH>; |
| 127 |
usb-phy = <&usb2_phy>; |
| 128 |
}; |
| 129 |
|
| 130 |
tv: connector { |
| 131 |
compatible = "composite-video-connector"; |
| 132 |
label = "tv"; |
| 133 |
|
| 134 |
port { |
| 135 |
tv_connector_in: endpoint { |
| 136 |
remote-endpoint = <&venc_out>; |
| 137 |
}; |
| 138 |
}; |
| 139 |
}; |
| 140 |
|
| 141 |
sound: n900-audio { |
| 142 |
compatible = "nokia,n900-audio"; |
| 143 |
|
| 144 |
nokia,cpu-dai = <&mcbsp2>; |
| 145 |
nokia,audio-codec = <&tlv320aic3x>, <&tlv320aic3x_aux>; |
| 146 |
nokia,headphone-amplifier = <&tpa6130a2>; |
| 147 |
|
| 148 |
tvout-selection-gpios = <&gpio2 8 GPIO_ACTIVE_HIGH>; /* 40 */ |
| 149 |
jack-detection-gpios = <&gpio6 17 GPIO_ACTIVE_HIGH>; /* 177 */ |
| 150 |
eci-switch-gpios = <&gpio6 22 GPIO_ACTIVE_HIGH>; /* 182 */ |
| 151 |
speaker-amplifier-gpios = <&twl_gpio 7 GPIO_ACTIVE_HIGH>; |
| 152 |
}; |
| 153 |
|
| 154 |
battery: n900-battery { |
| 155 |
compatible = "nokia,n900-battery"; |
| 156 |
io-channels = <&twl_madc 0>, <&twl_madc 4>, <&twl_madc 12>; |
| 157 |
io-channel-names = "temp", "bsi", "vbat"; |
| 158 |
}; |
| 159 |
|
| 160 |
pwm9: pwm-9 { |
| 161 |
compatible = "ti,omap-dmtimer-pwm"; |
| 162 |
#pwm-cells = <3>; |
| 163 |
ti,timers = <&timer9>; |
| 164 |
ti,clock-source = <0x00>; /* timer_sys_ck */ |
| 165 |
}; |
| 166 |
|
| 167 |
ir: n900-ir { |
| 168 |
compatible = "nokia,n900-ir"; |
| 169 |
pwms = <&pwm9 0 26316 0>; /* 38000 Hz */ |
| 170 |
}; |
| 171 |
|
| 172 |
rom_rng: rng { |
| 173 |
compatible = "nokia,n900-rom-rng"; |
| 174 |
clocks = <&rng_ick>; |
| 175 |
clock-names = "ick"; |
| 176 |
}; |
| 177 |
|
| 178 |
/* controlled (enabled/disabled) directly by bcm2048 and wl1251 */ |
| 179 |
vctcxo: vctcxo { |
| 180 |
compatible = "fixed-clock"; |
| 181 |
#clock-cells = <0>; |
| 182 |
clock-frequency = <38400000>; |
| 183 |
}; |
| 184 |
}; |
| 185 |
|
| 186 |
&isp { |
| 187 |
vdds_csib-supply = <&vaux2>; |
| 188 |
|
| 189 |
pinctrl-names = "default"; |
| 190 |
pinctrl-0 = <&camera_pins>; |
| 191 |
|
| 192 |
ports { |
| 193 |
port@1 { |
| 194 |
reg = <1>; |
| 195 |
|
| 196 |
csi_isp: endpoint { |
| 197 |
remote-endpoint = <&csi_cam1>; |
| 198 |
bus-type = <MEDIA_BUS_TYPE_CCP2>; |
| 199 |
clock-lanes = <1>; |
| 200 |
data-lanes = <0>; |
| 201 |
lane-polarity = <0 0>; |
| 202 |
/* Select strobe = <1> for back camera, <0> for front camera */ |
| 203 |
strobe = <1>; |
| 204 |
}; |
| 205 |
}; |
| 206 |
}; |
| 207 |
}; |
| 208 |
|
| 209 |
&omap3_pmx_core { |
| 210 |
pinctrl-names = "default"; |
| 211 |
|
| 212 |
uart2_pins: uart2-pins { |
| 213 |
pinctrl-single,pins = < |
| 214 |
OMAP3_CORE1_IOPAD(0x2174, PIN_INPUT_PULLUP | MUX_MODE0) /* uart2_cts */ |
| 215 |
OMAP3_CORE1_IOPAD(0x2176, PIN_OUTPUT | MUX_MODE0) /* uart2_rts */ |
| 216 |
OMAP3_CORE1_IOPAD(0x2178, PIN_OUTPUT | MUX_MODE0) /* uart2_tx */ |
| 217 |
OMAP3_CORE1_IOPAD(0x217a, PIN_INPUT | MUX_MODE0) /* uart2_rx */ |
| 218 |
>; |
| 219 |
}; |
| 220 |
|
| 221 |
uart3_pins: uart3-pins { |
| 222 |
pinctrl-single,pins = < |
| 223 |
OMAP3_CORE1_IOPAD(0x219e, PIN_INPUT | MUX_MODE0) /* uart3_rx */ |
| 224 |
OMAP3_CORE1_IOPAD(0x21a0, PIN_OUTPUT | MUX_MODE0) /* uart3_tx */ |
| 225 |
>; |
| 226 |
}; |
| 227 |
|
| 228 |
ethernet_pins: ethernet-pins { |
| 229 |
pinctrl-single,pins = < |
| 230 |
OMAP3_CORE1_IOPAD(0x20b4, PIN_INPUT_PULLDOWN | MUX_MODE4) /* gpmc_ncs3.gpio_54 */ |
| 231 |
OMAP3_CORE1_IOPAD(0x20fc, PIN_OUTPUT | MUX_MODE4) /* dss_data16.gpio_86 */ |
| 232 |
OMAP3_CORE1_IOPAD(0x219c, PIN_OUTPUT | MUX_MODE4) /* uart3_rts_sd.gpio_164 */ |
| 233 |
>; |
| 234 |
}; |
| 235 |
|
| 236 |
gpmc_pins: gpmc-pins { |
| 237 |
pinctrl-single,pins = < |
| 238 |
|
| 239 |
/* address lines */ |
| 240 |
OMAP3_CORE1_IOPAD(0x207a, PIN_OUTPUT | MUX_MODE0) /* gpmc_a1.gpmc_a1 */ |
| 241 |
OMAP3_CORE1_IOPAD(0x207c, PIN_OUTPUT | MUX_MODE0) /* gpmc_a2.gpmc_a2 */ |
| 242 |
OMAP3_CORE1_IOPAD(0x207e, PIN_OUTPUT | MUX_MODE0) /* gpmc_a3.gpmc_a3 */ |
| 243 |
|
| 244 |
/* data lines, gpmc_d0..d7 not muxable according to TRM */ |
| 245 |
OMAP3_CORE1_IOPAD(0x209e, PIN_INPUT | MUX_MODE0) /* gpmc_d8.gpmc_d8 */ |
| 246 |
OMAP3_CORE1_IOPAD(0x20a0, PIN_INPUT | MUX_MODE0) /* gpmc_d9.gpmc_d9 */ |
| 247 |
OMAP3_CORE1_IOPAD(0x20a2, PIN_INPUT | MUX_MODE0) /* gpmc_d10.gpmc_d10 */ |
| 248 |
OMAP3_CORE1_IOPAD(0x20a4, PIN_INPUT | MUX_MODE0) /* gpmc_d11.gpmc_d11 */ |
| 249 |
OMAP3_CORE1_IOPAD(0x20a6, PIN_INPUT | MUX_MODE0) /* gpmc_d12.gpmc_d12 */ |
| 250 |
OMAP3_CORE1_IOPAD(0x20a8, PIN_INPUT | MUX_MODE0) /* gpmc_d13.gpmc_d13 */ |
| 251 |
OMAP3_CORE1_IOPAD(0x20aa, PIN_INPUT | MUX_MODE0) /* gpmc_d14.gpmc_d14 */ |
| 252 |
OMAP3_CORE1_IOPAD(0x20ac, PIN_INPUT | MUX_MODE0) /* gpmc_d15.gpmc_d15 */ |
| 253 |
|
| 254 |
/* |
| 255 |
* gpmc_ncs0, gpmc_nadv_ale, gpmc_noe, gpmc_nwe, gpmc_wait0 not muxable |
| 256 |
* according to TRM. OneNAND seems to require PIN_INPUT on clock. |
| 257 |
*/ |
| 258 |
OMAP3_CORE1_IOPAD(0x20b0, PIN_OUTPUT | MUX_MODE0) /* gpmc_ncs1.gpmc_ncs1 */ |
| 259 |
OMAP3_CORE1_IOPAD(0x20be, PIN_INPUT | MUX_MODE0) /* gpmc_clk.gpmc_clk */ |
| 260 |
>; |
| 261 |
}; |
| 262 |
|
| 263 |
i2c1_pins: i2c1-pins { |
| 264 |
pinctrl-single,pins = < |
| 265 |
OMAP3_CORE1_IOPAD(0x21ba, PIN_INPUT | MUX_MODE0) /* i2c1_scl */ |
| 266 |
OMAP3_CORE1_IOPAD(0x21bc, PIN_INPUT | MUX_MODE0) /* i2c1_sda */ |
| 267 |
>; |
| 268 |
}; |
| 269 |
|
| 270 |
i2c2_pins: i2c2-pins { |
| 271 |
pinctrl-single,pins = < |
| 272 |
OMAP3_CORE1_IOPAD(0x21be, PIN_INPUT | MUX_MODE0) /* i2c2_scl */ |
| 273 |
OMAP3_CORE1_IOPAD(0x21c0, PIN_INPUT | MUX_MODE0) /* i2c2_sda */ |
| 274 |
>; |
| 275 |
}; |
| 276 |
|
| 277 |
i2c3_pins: i2c3-pins { |
| 278 |
pinctrl-single,pins = < |
| 279 |
OMAP3_CORE1_IOPAD(0x21c2, PIN_INPUT | MUX_MODE0) /* i2c3_scl */ |
| 280 |
OMAP3_CORE1_IOPAD(0x21c4, PIN_INPUT | MUX_MODE0) /* i2c3_sda */ |
| 281 |
>; |
| 282 |
}; |
| 283 |
|
| 284 |
debug_leds: debug-led-pins { |
| 285 |
pinctrl-single,pins = < |
| 286 |
OMAP3_CORE1_IOPAD(0x2198, PIN_OUTPUT | MUX_MODE4) /* mcbsp1_clkx.gpio_162 */ |
| 287 |
>; |
| 288 |
}; |
| 289 |
|
| 290 |
mcspi4_pins: mcspi4-pins { |
| 291 |
pinctrl-single,pins = < |
| 292 |
OMAP3_CORE1_IOPAD(0x218c, PIN_INPUT_PULLDOWN | MUX_MODE1) /* mcspi4_clk */ |
| 293 |
OMAP3_CORE1_IOPAD(0x2192, PIN_INPUT_PULLDOWN | MUX_MODE1) /* mcspi4_somi */ |
| 294 |
OMAP3_CORE1_IOPAD(0x2190, PIN_OUTPUT | MUX_MODE1) /* mcspi4_simo */ |
| 295 |
OMAP3_CORE1_IOPAD(0x2196, PIN_OUTPUT | MUX_MODE1) /* mcspi4_cs0 */ |
| 296 |
>; |
| 297 |
}; |
| 298 |
|
| 299 |
mmc1_pins: mmc1-pins { |
| 300 |
pinctrl-single,pins = < |
| 301 |
OMAP3_CORE1_IOPAD(0x2144, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_clk */ |
| 302 |
OMAP3_CORE1_IOPAD(0x2146, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_cmd */ |
| 303 |
OMAP3_CORE1_IOPAD(0x2148, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat0 */ |
| 304 |
OMAP3_CORE1_IOPAD(0x214a, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat1 */ |
| 305 |
OMAP3_CORE1_IOPAD(0x214c, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat2 */ |
| 306 |
OMAP3_CORE1_IOPAD(0x214e, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat3 */ |
| 307 |
>; |
| 308 |
}; |
| 309 |
|
| 310 |
mmc2_pins: mmc2-pins { |
| 311 |
pinctrl-single,pins = < |
| 312 |
OMAP3_CORE1_IOPAD(0x2158, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_clk */ |
| 313 |
OMAP3_CORE1_IOPAD(0x215a, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_cmd */ |
| 314 |
OMAP3_CORE1_IOPAD(0x215c, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat0 */ |
| 315 |
OMAP3_CORE1_IOPAD(0x215e, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat1 */ |
| 316 |
OMAP3_CORE1_IOPAD(0x2160, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat2 */ |
| 317 |
OMAP3_CORE1_IOPAD(0x2162, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat3 */ |
| 318 |
OMAP3_CORE1_IOPAD(0x2164, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat4 */ |
| 319 |
OMAP3_CORE1_IOPAD(0x2166, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat5 */ |
| 320 |
OMAP3_CORE1_IOPAD(0x2168, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat6 */ |
| 321 |
OMAP3_CORE1_IOPAD(0x216a, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat7 */ |
| 322 |
>; |
| 323 |
}; |
| 324 |
|
| 325 |
acx565akm_pins: acx565akm-pins { |
| 326 |
pinctrl-single,pins = < |
| 327 |
OMAP3_CORE1_IOPAD(0x2104, PIN_OUTPUT | MUX_MODE4) /* RX51_LCD_RESET_GPIO */ |
| 328 |
>; |
| 329 |
}; |
| 330 |
|
| 331 |
dss_sdi_pins: dss-sdi-pins { |
| 332 |
pinctrl-single,pins = < |
| 333 |
OMAP3_CORE1_IOPAD(0x20f0, PIN_OUTPUT | MUX_MODE1) /* dss_data10.sdi_dat1n */ |
| 334 |
OMAP3_CORE1_IOPAD(0x20f2, PIN_OUTPUT | MUX_MODE1) /* dss_data11.sdi_dat1p */ |
| 335 |
OMAP3_CORE1_IOPAD(0x20f4, PIN_OUTPUT | MUX_MODE1) /* dss_data12.sdi_dat2n */ |
| 336 |
OMAP3_CORE1_IOPAD(0x20f6, PIN_OUTPUT | MUX_MODE1) /* dss_data13.sdi_dat2p */ |
| 337 |
|
| 338 |
OMAP3_CORE1_IOPAD(0x2108, PIN_OUTPUT | MUX_MODE1) /* dss_data22.sdi_clkp */ |
| 339 |
OMAP3_CORE1_IOPAD(0x210a, PIN_OUTPUT | MUX_MODE1) /* dss_data23.sdi_clkn */ |
| 340 |
>; |
| 341 |
}; |
| 342 |
|
| 343 |
wl1251_pins: wl1251-pins { |
| 344 |
pinctrl-single,pins = < |
| 345 |
OMAP3_CORE1_IOPAD(0x20fe, PIN_OUTPUT | MUX_MODE4) /* gpio 87 => wl1251 enable */ |
| 346 |
OMAP3_CORE1_IOPAD(0x208a, PIN_INPUT | MUX_MODE4) /* gpio 42 => wl1251 irq */ |
| 347 |
>; |
| 348 |
}; |
| 349 |
|
| 350 |
ssi_pins: ssi-pins { |
| 351 |
pinctrl-single,pins = < |
| 352 |
OMAP3_CORE1_IOPAD(0x2180, PIN_INPUT_PULLUP | MUX_MODE1) /* ssi1_rdy_tx */ |
| 353 |
OMAP3_CORE1_IOPAD(0x217e, PIN_OUTPUT | MUX_MODE1) /* ssi1_flag_tx */ |
| 354 |
OMAP3_CORE1_IOPAD(0x2182, PIN_INPUT | MUX_MODE4) /* ssi1_wake_tx (cawake) */ |
| 355 |
OMAP3_CORE1_IOPAD(0x217c, PIN_OUTPUT | MUX_MODE1) /* ssi1_dat_tx */ |
| 356 |
OMAP3_CORE1_IOPAD(0x2184, PIN_INPUT | MUX_MODE1) /* ssi1_dat_rx */ |
| 357 |
OMAP3_CORE1_IOPAD(0x2186, PIN_INPUT | MUX_MODE1) /* ssi1_flag_rx */ |
| 358 |
OMAP3_CORE1_IOPAD(0x2188, PIN_OUTPUT | MUX_MODE1) /* ssi1_rdy_rx */ |
| 359 |
OMAP3_CORE1_IOPAD(0x218a, PIN_OUTPUT | MUX_MODE1) /* ssi1_wake */ |
| 360 |
>; |
| 361 |
}; |
| 362 |
|
| 363 |
modem_pins: modem-pins { |
| 364 |
pinctrl-single,pins = < |
| 365 |
OMAP3_CORE1_IOPAD(0x20dc, PIN_OUTPUT | MUX_MODE4) /* gpio 70 => cmt_apeslpx */ |
| 366 |
OMAP3_CORE1_IOPAD(0x20e0, PIN_INPUT | MUX_MODE4) /* gpio 72 => ape_rst_rq */ |
| 367 |
OMAP3_CORE1_IOPAD(0x20e2, PIN_OUTPUT | MUX_MODE4) /* gpio 73 => cmt_rst_rq */ |
| 368 |
OMAP3_CORE1_IOPAD(0x20e4, PIN_OUTPUT | MUX_MODE4) /* gpio 74 => cmt_en */ |
| 369 |
OMAP3_CORE1_IOPAD(0x20e6, PIN_OUTPUT | MUX_MODE4) /* gpio 75 => cmt_rst */ |
| 370 |
OMAP3_CORE1_IOPAD(0x218e, PIN_OUTPUT | MUX_MODE4) /* gpio 157 => cmt_bsi */ |
| 371 |
>; |
| 372 |
}; |
| 373 |
|
| 374 |
camera_pins: camera-pins { |
| 375 |
pinctrl-single,pins = < |
| 376 |
OMAP3_CORE1_IOPAD(0x210c, PIN_OUTPUT | MUX_MODE7) /* cam_hs */ |
| 377 |
OMAP3_CORE1_IOPAD(0x210e, PIN_OUTPUT | MUX_MODE7) /* cam_vs */ |
| 378 |
OMAP3_CORE1_IOPAD(0x2110, PIN_OUTPUT | MUX_MODE0) /* cam_xclka */ |
| 379 |
OMAP3_CORE1_IOPAD(0x211e, PIN_OUTPUT | MUX_MODE7) /* cam_d4 */ |
| 380 |
OMAP3_CORE1_IOPAD(0x2122, PIN_INPUT | MUX_MODE0) /* cam_d6 */ |
| 381 |
OMAP3_CORE1_IOPAD(0x2124, PIN_INPUT | MUX_MODE0) /* cam_d7 */ |
| 382 |
OMAP3_CORE1_IOPAD(0x2126, PIN_INPUT | MUX_MODE0) /* cam_d8 */ |
| 383 |
OMAP3_CORE1_IOPAD(0x2128, PIN_INPUT | MUX_MODE0) /* cam_d9 */ |
| 384 |
OMAP3_CORE1_IOPAD(0x212a, PIN_OUTPUT | MUX_MODE7) /* cam_d10 */ |
| 385 |
OMAP3_CORE1_IOPAD(0x212e, PIN_OUTPUT | MUX_MODE7) /* cam_xclkb */ |
| 386 |
OMAP3_CORE1_IOPAD(0x2132, PIN_OUTPUT | MUX_MODE0) /* cam_strobe */ |
| 387 |
>; |
| 388 |
}; |
| 389 |
}; |
| 390 |
|
| 391 |
&i2c1 { |
| 392 |
pinctrl-names = "default"; |
| 393 |
pinctrl-0 = <&i2c1_pins>; |
| 394 |
|
| 395 |
clock-frequency = <2200000>; |
| 396 |
|
| 397 |
twl: twl@48 { |
| 398 |
reg = <0x48>; |
| 399 |
interrupts = <7>; /* SYS_NIRQ cascaded to intc */ |
| 400 |
interrupt-parent = <&intc>; |
| 401 |
}; |
| 402 |
}; |
| 403 |
|
| 404 |
#include "twl4030.dtsi" |
| 405 |
#include "twl4030_omap3.dtsi" |
| 406 |
|
| 407 |
&vaux1 { |
| 408 |
regulator-name = "V28"; |
| 409 |
regulator-min-microvolt = <2800000>; |
| 410 |
regulator-max-microvolt = <2800000>; |
| 411 |
regulator-initial-mode = <0x0e>; /* RES_STATE_ACTIVE */ |
| 412 |
regulator-always-on; /* due to battery cover sensor */ |
| 413 |
}; |
| 414 |
|
| 415 |
&vaux2 { |
| 416 |
regulator-name = "VCSI"; |
| 417 |
regulator-min-microvolt = <1800000>; |
| 418 |
regulator-max-microvolt = <1800000>; |
| 419 |
regulator-initial-mode = <0x0e>; /* RES_STATE_ACTIVE */ |
| 420 |
}; |
| 421 |
|
| 422 |
&vaux3 { |
| 423 |
regulator-name = "VMMC2_30"; |
| 424 |
regulator-min-microvolt = <2800000>; |
| 425 |
regulator-max-microvolt = <3000000>; |
| 426 |
regulator-initial-mode = <0x0e>; /* RES_STATE_ACTIVE */ |
| 427 |
}; |
| 428 |
|
| 429 |
&vaux4 { |
| 430 |
regulator-name = "VCAM_ANA_28"; |
| 431 |
regulator-min-microvolt = <2800000>; |
| 432 |
regulator-max-microvolt = <2800000>; |
| 433 |
regulator-initial-mode = <0x0e>; /* RES_STATE_ACTIVE */ |
| 434 |
}; |
| 435 |
|
| 436 |
&vmmc1 { |
| 437 |
regulator-name = "VMMC1"; |
| 438 |
regulator-min-microvolt = <1850000>; |
| 439 |
regulator-max-microvolt = <3150000>; |
| 440 |
regulator-initial-mode = <0x0e>; /* RES_STATE_ACTIVE */ |
| 441 |
}; |
| 442 |
|
| 443 |
&vmmc2 { |
| 444 |
regulator-name = "V28_A"; |
| 445 |
regulator-min-microvolt = <2800000>; |
| 446 |
regulator-max-microvolt = <3000000>; |
| 447 |
regulator-initial-mode = <0x0e>; /* RES_STATE_ACTIVE */ |
| 448 |
regulator-always-on; /* due VIO leak to AIC34 VDDs */ |
| 449 |
}; |
| 450 |
|
| 451 |
&vpll1 { |
| 452 |
regulator-name = "VPLL"; |
| 453 |
regulator-min-microvolt = <1800000>; |
| 454 |
regulator-max-microvolt = <1800000>; |
| 455 |
regulator-initial-mode = <0x0e>; /* RES_STATE_ACTIVE */ |
| 456 |
regulator-always-on; |
| 457 |
}; |
| 458 |
|
| 459 |
&vpll2 { |
| 460 |
regulator-name = "VSDI_CSI"; |
| 461 |
regulator-min-microvolt = <1800000>; |
| 462 |
regulator-max-microvolt = <1800000>; |
| 463 |
regulator-initial-mode = <0x0e>; /* RES_STATE_ACTIVE */ |
| 464 |
regulator-always-on; |
| 465 |
}; |
| 466 |
|
| 467 |
&vsim { |
| 468 |
regulator-name = "VMMC2_IO_18"; |
| 469 |
regulator-min-microvolt = <1800000>; |
| 470 |
regulator-max-microvolt = <1800000>; |
| 471 |
regulator-initial-mode = <0x0e>; /* RES_STATE_ACTIVE */ |
| 472 |
}; |
| 473 |
|
| 474 |
&vio { |
| 475 |
regulator-name = "VIO"; |
| 476 |
regulator-min-microvolt = <1800000>; |
| 477 |
regulator-max-microvolt = <1800000>; |
| 478 |
}; |
| 479 |
|
| 480 |
&vintana1 { |
| 481 |
regulator-name = "VINTANA1"; |
| 482 |
/* fixed to 1500000 */ |
| 483 |
regulator-always-on; |
| 484 |
}; |
| 485 |
|
| 486 |
&vintana2 { |
| 487 |
regulator-name = "VINTANA2"; |
| 488 |
regulator-min-microvolt = <2750000>; |
| 489 |
regulator-max-microvolt = <2750000>; |
| 490 |
regulator-always-on; |
| 491 |
}; |
| 492 |
|
| 493 |
&vintdig { |
| 494 |
regulator-name = "VINTDIG"; |
| 495 |
/* fixed to 1500000 */ |
| 496 |
regulator-always-on; |
| 497 |
}; |
| 498 |
|
| 499 |
/* First two dma channels are reserved on secure omap3 */ |
| 500 |
&sdma { |
| 501 |
dma-channel-mask = <0xfffffffc>; |
| 502 |
}; |
| 503 |
|
| 504 |
&twl { |
| 505 |
twl_audio: audio { |
| 506 |
compatible = "ti,twl4030-audio"; |
| 507 |
ti,enable-vibra = <1>; |
| 508 |
}; |
| 509 |
|
| 510 |
twl_power: power { |
| 511 |
compatible = "ti,twl4030-power-idle-osc-off"; |
| 512 |
ti,use_poweroff; |
| 513 |
}; |
| 514 |
}; |
| 515 |
|
| 516 |
&twl_keypad { |
| 517 |
linux,keymap = < MATRIX_KEY(0x00, 0x00, KEY_Q) |
| 518 |
MATRIX_KEY(0x00, 0x01, KEY_O) |
| 519 |
MATRIX_KEY(0x00, 0x02, KEY_P) |
| 520 |
MATRIX_KEY(0x00, 0x03, KEY_COMMA) |
| 521 |
MATRIX_KEY(0x00, 0x04, KEY_BACKSPACE) |
| 522 |
MATRIX_KEY(0x00, 0x06, KEY_A) |
| 523 |
MATRIX_KEY(0x00, 0x07, KEY_S) |
| 524 |
|
| 525 |
MATRIX_KEY(0x01, 0x00, KEY_W) |
| 526 |
MATRIX_KEY(0x01, 0x01, KEY_D) |
| 527 |
MATRIX_KEY(0x01, 0x02, KEY_F) |
| 528 |
MATRIX_KEY(0x01, 0x03, KEY_G) |
| 529 |
MATRIX_KEY(0x01, 0x04, KEY_H) |
| 530 |
MATRIX_KEY(0x01, 0x05, KEY_J) |
| 531 |
MATRIX_KEY(0x01, 0x06, KEY_K) |
| 532 |
MATRIX_KEY(0x01, 0x07, KEY_L) |
| 533 |
|
| 534 |
MATRIX_KEY(0x02, 0x00, KEY_E) |
| 535 |
MATRIX_KEY(0x02, 0x01, KEY_DOT) |
| 536 |
MATRIX_KEY(0x02, 0x02, KEY_UP) |
| 537 |
MATRIX_KEY(0x02, 0x03, KEY_ENTER) |
| 538 |
MATRIX_KEY(0x02, 0x05, KEY_Z) |
| 539 |
MATRIX_KEY(0x02, 0x06, KEY_X) |
| 540 |
MATRIX_KEY(0x02, 0x07, KEY_C) |
| 541 |
MATRIX_KEY(0x02, 0x08, KEY_F9) |
| 542 |
|
| 543 |
MATRIX_KEY(0x03, 0x00, KEY_R) |
| 544 |
MATRIX_KEY(0x03, 0x01, KEY_V) |
| 545 |
MATRIX_KEY(0x03, 0x02, KEY_B) |
| 546 |
MATRIX_KEY(0x03, 0x03, KEY_N) |
| 547 |
MATRIX_KEY(0x03, 0x04, KEY_M) |
| 548 |
MATRIX_KEY(0x03, 0x05, KEY_SPACE) |
| 549 |
MATRIX_KEY(0x03, 0x06, KEY_SPACE) |
| 550 |
MATRIX_KEY(0x03, 0x07, KEY_LEFT) |
| 551 |
|
| 552 |
MATRIX_KEY(0x04, 0x00, KEY_T) |
| 553 |
MATRIX_KEY(0x04, 0x01, KEY_DOWN) |
| 554 |
MATRIX_KEY(0x04, 0x02, KEY_RIGHT) |
| 555 |
MATRIX_KEY(0x04, 0x04, KEY_LEFTCTRL) |
| 556 |
MATRIX_KEY(0x04, 0x05, KEY_RIGHTALT) |
| 557 |
MATRIX_KEY(0x04, 0x06, KEY_LEFTSHIFT) |
| 558 |
MATRIX_KEY(0x04, 0x08, KEY_F10) |
| 559 |
|
| 560 |
MATRIX_KEY(0x05, 0x00, KEY_Y) |
| 561 |
MATRIX_KEY(0x05, 0x08, KEY_F11) |
| 562 |
|
| 563 |
MATRIX_KEY(0x06, 0x00, KEY_U) |
| 564 |
|
| 565 |
MATRIX_KEY(0x07, 0x00, KEY_I) |
| 566 |
MATRIX_KEY(0x07, 0x01, KEY_F7) |
| 567 |
MATRIX_KEY(0x07, 0x02, KEY_F8) |
| 568 |
>; |
| 569 |
}; |
| 570 |
|
| 571 |
&twl_gpio { |
| 572 |
ti,pullups = <0x0>; |
| 573 |
ti,pulldowns = <0x03ff3f>; /* BIT(0..5) | BIT(8..17) */ |
| 574 |
}; |
| 575 |
|
| 576 |
&i2c2 { |
| 577 |
pinctrl-names = "default"; |
| 578 |
pinctrl-0 = <&i2c2_pins>; |
| 579 |
|
| 580 |
clock-frequency = <100000>; |
| 581 |
|
| 582 |
tlv320aic3x: tlv320aic3x@18 { |
| 583 |
compatible = "ti,tlv320aic3x"; |
| 584 |
reg = <0x18>; |
| 585 |
reset-gpios = <&gpio2 28 GPIO_ACTIVE_LOW>; /* 60 */ |
| 586 |
ai3x-gpio-func = < |
| 587 |
0 /* AIC3X_GPIO1_FUNC_DISABLED */ |
| 588 |
5 /* AIC3X_GPIO2_FUNC_DIGITAL_MIC_INPUT */ |
| 589 |
>; |
| 590 |
|
| 591 |
AVDD-supply = <&vmmc2>; |
| 592 |
DRVDD-supply = <&vmmc2>; |
| 593 |
IOVDD-supply = <&vio>; |
| 594 |
DVDD-supply = <&vio>; |
| 595 |
|
| 596 |
ai3x-micbias-vg = <1>; |
| 597 |
}; |
| 598 |
|
| 599 |
tlv320aic3x_aux: tlv320aic3x@19 { |
| 600 |
compatible = "ti,tlv320aic3x"; |
| 601 |
reg = <0x19>; |
| 602 |
reset-gpios = <&gpio2 28 GPIO_ACTIVE_LOW>; /* 60 */ |
| 603 |
|
| 604 |
AVDD-supply = <&vmmc2>; |
| 605 |
DRVDD-supply = <&vmmc2>; |
| 606 |
IOVDD-supply = <&vio>; |
| 607 |
DVDD-supply = <&vio>; |
| 608 |
|
| 609 |
ai3x-micbias-vg = <2>; |
| 610 |
}; |
| 611 |
|
| 612 |
tsl2563: tsl2563@29 { |
| 613 |
compatible = "amstaos,tsl2563"; |
| 614 |
reg = <0x29>; |
| 615 |
|
| 616 |
amstaos,cover-comp-gain = <16>; |
| 617 |
}; |
| 618 |
|
| 619 |
adp1653: led-controller@30 { |
| 620 |
compatible = "adi,adp1653"; |
| 621 |
reg = <0x30>; |
| 622 |
enable-gpios = <&gpio3 24 GPIO_ACTIVE_HIGH>; /* 88 */ |
| 623 |
|
| 624 |
flash { |
| 625 |
flash-timeout-us = <500000>; |
| 626 |
flash-max-microamp = <320000>; |
| 627 |
led-max-microamp = <50000>; |
| 628 |
}; |
| 629 |
indicator { |
| 630 |
led-max-microamp = <17500>; |
| 631 |
}; |
| 632 |
}; |
| 633 |
|
| 634 |
lp5523: lp5523@32 { |
| 635 |
#address-cells = <1>; |
| 636 |
#size-cells = <0>; |
| 637 |
compatible = "national,lp5523"; |
| 638 |
reg = <0x32>; |
| 639 |
clock-mode = /bits/ 8 <0>; /* LP55XX_CLOCK_AUTO */ |
| 640 |
enable-gpios = <&gpio2 9 GPIO_ACTIVE_HIGH>; /* 41 */ |
| 641 |
|
| 642 |
led@0 { |
| 643 |
reg = <0>; |
| 644 |
chan-name = "lp5523:kb1"; |
| 645 |
led-cur = /bits/ 8 <50>; |
| 646 |
max-cur = /bits/ 8 <100>; |
| 647 |
color = <LED_COLOR_ID_WHITE>; |
| 648 |
function = LED_FUNCTION_KBD_BACKLIGHT; |
| 649 |
}; |
| 650 |
|
| 651 |
led@1 { |
| 652 |
reg = <1>; |
| 653 |
chan-name = "lp5523:kb2"; |
| 654 |
led-cur = /bits/ 8 <50>; |
| 655 |
max-cur = /bits/ 8 <100>; |
| 656 |
color = <LED_COLOR_ID_WHITE>; |
| 657 |
function = LED_FUNCTION_KBD_BACKLIGHT; |
| 658 |
}; |
| 659 |
|
| 660 |
led@2 { |
| 661 |
reg = <2>; |
| 662 |
chan-name = "lp5523:kb3"; |
| 663 |
led-cur = /bits/ 8 <50>; |
| 664 |
max-cur = /bits/ 8 <100>; |
| 665 |
color = <LED_COLOR_ID_WHITE>; |
| 666 |
function = LED_FUNCTION_KBD_BACKLIGHT; |
| 667 |
}; |
| 668 |
|
| 669 |
led@3 { |
| 670 |
reg = <3>; |
| 671 |
chan-name = "lp5523:kb4"; |
| 672 |
led-cur = /bits/ 8 <50>; |
| 673 |
max-cur = /bits/ 8 <100>; |
| 674 |
color = <LED_COLOR_ID_WHITE>; |
| 675 |
function = LED_FUNCTION_KBD_BACKLIGHT; |
| 676 |
}; |
| 677 |
|
| 678 |
led@4 { |
| 679 |
reg = <4>; |
| 680 |
chan-name = "lp5523:b"; |
| 681 |
led-cur = /bits/ 8 <50>; |
| 682 |
max-cur = /bits/ 8 <100>; |
| 683 |
color = <LED_COLOR_ID_BLUE>; |
| 684 |
function = LED_FUNCTION_STATUS; |
| 685 |
}; |
| 686 |
|
| 687 |
led@5 { |
| 688 |
reg = <5>; |
| 689 |
chan-name = "lp5523:g"; |
| 690 |
led-cur = /bits/ 8 <50>; |
| 691 |
max-cur = /bits/ 8 <100>; |
| 692 |
color = <LED_COLOR_ID_GREEN>; |
| 693 |
function = LED_FUNCTION_STATUS; |
| 694 |
}; |
| 695 |
|
| 696 |
led@6 { |
| 697 |
reg = <6>; |
| 698 |
chan-name = "lp5523:r"; |
| 699 |
led-cur = /bits/ 8 <50>; |
| 700 |
max-cur = /bits/ 8 <100>; |
| 701 |
color = <LED_COLOR_ID_RED>; |
| 702 |
function = LED_FUNCTION_STATUS; |
| 703 |
}; |
| 704 |
|
| 705 |
led@7 { |
| 706 |
reg = <7>; |
| 707 |
chan-name = "lp5523:kb5"; |
| 708 |
led-cur = /bits/ 8 <50>; |
| 709 |
max-cur = /bits/ 8 <100>; |
| 710 |
color = <LED_COLOR_ID_WHITE>; |
| 711 |
function = LED_FUNCTION_KBD_BACKLIGHT; |
| 712 |
}; |
| 713 |
|
| 714 |
led@8 { |
| 715 |
reg = <8>; |
| 716 |
chan-name = "lp5523:kb6"; |
| 717 |
led-cur = /bits/ 8 <50>; |
| 718 |
max-cur = /bits/ 8 <100>; |
| 719 |
color = <LED_COLOR_ID_WHITE>; |
| 720 |
function = LED_FUNCTION_KBD_BACKLIGHT; |
| 721 |
}; |
| 722 |
}; |
| 723 |
|
| 724 |
bq27200: bq27200@55 { |
| 725 |
compatible = "ti,bq27200"; |
| 726 |
reg = <0x55>; |
| 727 |
power-supplies = <&bq24150a>; |
| 728 |
}; |
| 729 |
|
| 730 |
/* Stereo headphone amplifier */ |
| 731 |
tpa6130a2: tpa6130a2@60 { |
| 732 |
compatible = "ti,tpa6130a2"; |
| 733 |
reg = <0x60>; |
| 734 |
|
| 735 |
Vdd-supply = <&vmmc2>; |
| 736 |
|
| 737 |
power-gpio = <&gpio4 2 GPIO_ACTIVE_HIGH>; /* 98 */ |
| 738 |
}; |
| 739 |
|
| 740 |
si4713: si4713@63 { |
| 741 |
compatible = "silabs,si4713"; |
| 742 |
reg = <0x63>; |
| 743 |
|
| 744 |
interrupts-extended = <&gpio2 21 IRQ_TYPE_EDGE_FALLING>; /* 53 */ |
| 745 |
reset-gpios = <&gpio6 3 GPIO_ACTIVE_HIGH>; /* 163 */ |
| 746 |
vio-supply = <&vio>; |
| 747 |
vdd-supply = <&vaux1>; |
| 748 |
}; |
| 749 |
|
| 750 |
bq24150a: bq24150a@6b { |
| 751 |
compatible = "ti,bq24150a"; |
| 752 |
reg = <0x6b>; |
| 753 |
|
| 754 |
ti,current-limit = <100>; |
| 755 |
ti,weak-battery-voltage = <3400>; |
| 756 |
ti,battery-regulation-voltage = <4200>; |
| 757 |
ti,charge-current = <950>; |
| 758 |
ti,termination-current = <100>; |
| 759 |
ti,resistor-sense = <68>; |
| 760 |
|
| 761 |
ti,usb-charger-detection = <&isp1707>; |
| 762 |
}; |
| 763 |
}; |
| 764 |
|
| 765 |
&i2c3 { |
| 766 |
pinctrl-names = "default"; |
| 767 |
pinctrl-0 = <&i2c3_pins>; |
| 768 |
|
| 769 |
clock-frequency = <400000>; |
| 770 |
|
| 771 |
accelerometer@1d { |
| 772 |
compatible = "st,lis302dl"; |
| 773 |
reg = <0x1d>; |
| 774 |
|
| 775 |
vdd-supply = <&vaux1>; |
| 776 |
vddio-supply = <&vio>; |
| 777 |
|
| 778 |
interrupt-parent = <&gpio6>; |
| 779 |
interrupts = <21 IRQ_TYPE_EDGE_RISING>, |
| 780 |
<20 IRQ_TYPE_EDGE_RISING>; /* 181 and 180 */ |
| 781 |
|
| 782 |
mount-matrix = "-1", "0", "0", |
| 783 |
"0", "1", "0", |
| 784 |
"0", "0", "-1"; |
| 785 |
}; |
| 786 |
|
| 787 |
cam1: camera@3e { |
| 788 |
compatible = "toshiba,et8ek8"; |
| 789 |
reg = <0x3e>; |
| 790 |
|
| 791 |
vana-supply = <&vaux4>; |
| 792 |
|
| 793 |
clocks = <&isp 0>; |
| 794 |
clock-names = "extclk"; |
| 795 |
clock-frequency = <9600000>; |
| 796 |
|
| 797 |
reset-gpio = <&gpio4 6 GPIO_ACTIVE_HIGH>; /* 102 */ |
| 798 |
|
| 799 |
lens-focus = <&ad5820>; |
| 800 |
|
| 801 |
port { |
| 802 |
csi_cam1: endpoint { |
| 803 |
bus-type = <MEDIA_BUS_TYPE_CCP2>; |
| 804 |
strobe = <1>; |
| 805 |
clock-inv = <0>; |
| 806 |
crc = <1>; |
| 807 |
|
| 808 |
remote-endpoint = <&csi_isp>; |
| 809 |
}; |
| 810 |
}; |
| 811 |
}; |
| 812 |
|
| 813 |
/* D/A converter for auto-focus */ |
| 814 |
ad5820: dac@c { |
| 815 |
compatible = "adi,ad5820"; |
| 816 |
reg = <0x0c>; |
| 817 |
|
| 818 |
VANA-supply = <&vaux4>; |
| 819 |
}; |
| 820 |
}; |
| 821 |
|
| 822 |
&mmc1 { |
| 823 |
pinctrl-names = "default"; |
| 824 |
pinctrl-0 = <&mmc1_pins>; |
| 825 |
vmmc-supply = <&vmmc1>; |
| 826 |
bus-width = <4>; |
| 827 |
}; |
| 828 |
|
| 829 |
/* most boards use vaux3, only some old versions use vmmc2 instead */ |
| 830 |
&mmc2 { |
| 831 |
pinctrl-names = "default"; |
| 832 |
pinctrl-0 = <&mmc2_pins>; |
| 833 |
vmmc-supply = <&vaux3>; |
| 834 |
vqmmc-supply = <&vsim>; |
| 835 |
bus-width = <8>; |
| 836 |
non-removable; |
| 837 |
no-sdio; |
| 838 |
no-sd; |
| 839 |
}; |
| 840 |
|
| 841 |
&mmc3 { |
| 842 |
status = "disabled"; |
| 843 |
}; |
| 844 |
|
| 845 |
&gpmc { |
| 846 |
ranges = <0 0 0x01000000 0x01000000>, /* 16 MB for OneNAND */ |
| 847 |
<1 0 0x02000000 0x01000000>; /* 16 MB for smc91c96 */ |
| 848 |
pinctrl-names = "default"; |
| 849 |
pinctrl-0 = <&gpmc_pins>; |
| 850 |
|
| 851 |
/* sys_ndmareq1 could be used by the driver, not as gpio65 though */ |
| 852 |
onenand@0,0 { |
| 853 |
#address-cells = <1>; |
| 854 |
#size-cells = <1>; |
| 855 |
compatible = "ti,omap2-onenand"; |
| 856 |
reg = <0 0 0x20000>; /* CS0, offset 0, IO size 128K */ |
| 857 |
|
| 858 |
/* |
| 859 |
* These timings are based on CONFIG_OMAP_GPMC_DEBUG=y reported |
| 860 |
* bootloader set values when booted with v5.1 |
| 861 |
* (OneNAND Manufacturer: Samsung): |
| 862 |
* |
| 863 |
* cs0 GPMC_CS_CONFIG1: 0xfb001202 |
| 864 |
* cs0 GPMC_CS_CONFIG2: 0x00111100 |
| 865 |
* cs0 GPMC_CS_CONFIG3: 0x00020200 |
| 866 |
* cs0 GPMC_CS_CONFIG4: 0x11001102 |
| 867 |
* cs0 GPMC_CS_CONFIG5: 0x03101616 |
| 868 |
* cs0 GPMC_CS_CONFIG6: 0x90060000 |
| 869 |
*/ |
| 870 |
gpmc,sync-read; |
| 871 |
gpmc,sync-write; |
| 872 |
gpmc,burst-length = <16>; |
| 873 |
gpmc,burst-read; |
| 874 |
gpmc,burst-wrap; |
| 875 |
gpmc,burst-write; |
| 876 |
gpmc,device-width = <2>; |
| 877 |
gpmc,mux-add-data = <2>; |
| 878 |
gpmc,cs-on-ns = <0>; |
| 879 |
gpmc,cs-rd-off-ns = <102>; |
| 880 |
gpmc,cs-wr-off-ns = <102>; |
| 881 |
gpmc,adv-on-ns = <0>; |
| 882 |
gpmc,adv-rd-off-ns = <12>; |
| 883 |
gpmc,adv-wr-off-ns = <12>; |
| 884 |
gpmc,oe-on-ns = <12>; |
| 885 |
gpmc,oe-off-ns = <102>; |
| 886 |
gpmc,we-on-ns = <0>; |
| 887 |
gpmc,we-off-ns = <102>; |
| 888 |
gpmc,rd-cycle-ns = <132>; |
| 889 |
gpmc,wr-cycle-ns = <132>; |
| 890 |
gpmc,access-ns = <96>; |
| 891 |
gpmc,page-burst-access-ns = <18>; |
| 892 |
gpmc,bus-turnaround-ns = <0>; |
| 893 |
gpmc,cycle2cycle-delay-ns = <0>; |
| 894 |
gpmc,wait-monitoring-ns = <0>; |
| 895 |
gpmc,clk-activation-ns = <6>; |
| 896 |
gpmc,wr-data-mux-bus-ns = <36>; |
| 897 |
gpmc,wr-access-ns = <96>; |
| 898 |
gpmc,sync-clk-ps = <15000>; |
| 899 |
|
| 900 |
/* |
| 901 |
* MTD partition table corresponding to Nokia's |
| 902 |
* Maemo 5 (Fremantle) release. |
| 903 |
*/ |
| 904 |
partition@0 { |
| 905 |
label = "bootloader"; |
| 906 |
reg = <0x00000000 0x00020000>; |
| 907 |
read-only; |
| 908 |
}; |
| 909 |
partition@1 { |
| 910 |
label = "config"; |
| 911 |
reg = <0x00020000 0x00060000>; |
| 912 |
}; |
| 913 |
partition@2 { |
| 914 |
label = "log"; |
| 915 |
reg = <0x00080000 0x00040000>; |
| 916 |
}; |
| 917 |
partition@3 { |
| 918 |
label = "kernel"; |
| 919 |
reg = <0x000c0000 0x00200000>; |
| 920 |
}; |
| 921 |
partition@4 { |
| 922 |
label = "initfs"; |
| 923 |
reg = <0x002c0000 0x00200000>; |
| 924 |
}; |
| 925 |
partition@5 { |
| 926 |
label = "rootfs"; |
| 927 |
reg = <0x004c0000 0x0fb40000>; |
| 928 |
}; |
| 929 |
}; |
| 930 |
|
| 931 |
/* Ethernet is on some early development boards and qemu */ |
| 932 |
ethernet@gpmc { |
| 933 |
compatible = "smsc,lan91c94"; |
| 934 |
interrupt-parent = <&gpio2>; |
| 935 |
interrupts = <22 IRQ_TYPE_LEVEL_HIGH>; /* gpio54 */ |
| 936 |
reg = <1 0 0xf>; /* 16 byte IO range */ |
| 937 |
bank-width = <2>; |
| 938 |
pinctrl-names = "default"; |
| 939 |
pinctrl-0 = <ðernet_pins>; |
| 940 |
power-gpios = <&gpio3 22 GPIO_ACTIVE_HIGH>; /* gpio86 */ |
| 941 |
reset-gpios = <&gpio6 4 GPIO_ACTIVE_HIGH>; /* gpio164 */ |
| 942 |
gpmc,device-width = <2>; |
| 943 |
gpmc,sync-clk-ps = <0>; |
| 944 |
gpmc,cs-on-ns = <0>; |
| 945 |
gpmc,cs-rd-off-ns = <48>; |
| 946 |
gpmc,cs-wr-off-ns = <24>; |
| 947 |
gpmc,adv-on-ns = <0>; |
| 948 |
gpmc,adv-rd-off-ns = <0>; |
| 949 |
gpmc,adv-wr-off-ns = <0>; |
| 950 |
gpmc,we-on-ns = <12>; |
| 951 |
gpmc,we-off-ns = <18>; |
| 952 |
gpmc,oe-on-ns = <12>; |
| 953 |
gpmc,oe-off-ns = <48>; |
| 954 |
gpmc,page-burst-access-ns = <0>; |
| 955 |
gpmc,access-ns = <42>; |
| 956 |
gpmc,rd-cycle-ns = <180>; |
| 957 |
gpmc,wr-cycle-ns = <180>; |
| 958 |
gpmc,bus-turnaround-ns = <0>; |
| 959 |
gpmc,cycle2cycle-delay-ns = <0>; |
| 960 |
gpmc,wait-monitoring-ns = <0>; |
| 961 |
gpmc,clk-activation-ns = <0>; |
| 962 |
gpmc,wr-access-ns = <0>; |
| 963 |
gpmc,wr-data-mux-bus-ns = <12>; |
| 964 |
}; |
| 965 |
}; |
| 966 |
|
| 967 |
&mcspi1 { |
| 968 |
/* |
| 969 |
* For some reason, touchscreen is necessary for screen to work at |
| 970 |
* all on real hw. It works well without it on emulator. |
| 971 |
* |
| 972 |
* Also... order in the device tree actually matters here. |
| 973 |
*/ |
| 974 |
tsc2005@0 { |
| 975 |
compatible = "ti,tsc2005"; |
| 976 |
spi-max-frequency = <6000000>; |
| 977 |
reg = <0>; |
| 978 |
|
| 979 |
vio-supply = <&vio>; |
| 980 |
|
| 981 |
reset-gpios = <&gpio4 8 GPIO_ACTIVE_HIGH>; /* 104 */ |
| 982 |
interrupts-extended = <&gpio4 4 IRQ_TYPE_EDGE_RISING>; /* 100 */ |
| 983 |
|
| 984 |
touchscreen-fuzz-x = <4>; |
| 985 |
touchscreen-fuzz-y = <7>; |
| 986 |
touchscreen-fuzz-pressure = <2>; |
| 987 |
touchscreen-size-x = <4096>; |
| 988 |
touchscreen-size-y = <4096>; |
| 989 |
touchscreen-max-pressure = <2048>; |
| 990 |
|
| 991 |
ti,x-plate-ohms = <280>; |
| 992 |
ti,esd-recovery-timeout-ms = <8000>; |
| 993 |
}; |
| 994 |
|
| 995 |
lcd: acx565akm@2 { |
| 996 |
compatible = "sony,acx565akm"; |
| 997 |
spi-max-frequency = <6000000>; |
| 998 |
reg = <2>; |
| 999 |
|
| 1000 |
pinctrl-names = "default"; |
| 1001 |
pinctrl-0 = <&acx565akm_pins>; |
| 1002 |
|
| 1003 |
label = "lcd"; |
| 1004 |
reset-gpios = <&gpio3 26 GPIO_ACTIVE_HIGH>; /* 90 */ |
| 1005 |
|
| 1006 |
port { |
| 1007 |
lcd_in: endpoint { |
| 1008 |
remote-endpoint = <&sdi_out>; |
| 1009 |
}; |
| 1010 |
}; |
| 1011 |
}; |
| 1012 |
}; |
| 1013 |
|
| 1014 |
&mcspi4 { |
| 1015 |
pinctrl-names = "default"; |
| 1016 |
pinctrl-0 = <&mcspi4_pins>; |
| 1017 |
|
| 1018 |
wl1251@0 { |
| 1019 |
pinctrl-names = "default"; |
| 1020 |
pinctrl-0 = <&wl1251_pins>; |
| 1021 |
|
| 1022 |
vio-supply = <&vio>; |
| 1023 |
|
| 1024 |
compatible = "ti,wl1251"; |
| 1025 |
reg = <0>; |
| 1026 |
spi-max-frequency = <48000000>; |
| 1027 |
|
| 1028 |
spi-cpol; |
| 1029 |
spi-cpha; |
| 1030 |
|
| 1031 |
ti,power-gpio = <&gpio3 23 GPIO_ACTIVE_HIGH>; /* 87 */ |
| 1032 |
|
| 1033 |
interrupt-parent = <&gpio2>; |
| 1034 |
interrupts = <10 IRQ_TYPE_NONE>; /* gpio line 42 */ |
| 1035 |
|
| 1036 |
clocks = <&vctcxo>; |
| 1037 |
}; |
| 1038 |
}; |
| 1039 |
|
| 1040 |
/* RNG not directly accessible on n900, see omap3-rom-rng instead */ |
| 1041 |
&rng_target { |
| 1042 |
status = "disabled"; |
| 1043 |
}; |
| 1044 |
|
| 1045 |
&usb_otg_hs { |
| 1046 |
interface-type = <0>; |
| 1047 |
usb-phy = <&usb2_phy>; |
| 1048 |
phys = <&usb2_phy>; |
| 1049 |
phy-names = "usb2-phy"; |
| 1050 |
mode = <2>; |
| 1051 |
power = <50>; |
| 1052 |
}; |
| 1053 |
|
| 1054 |
&uart1 { |
| 1055 |
status = "disabled"; |
| 1056 |
}; |
| 1057 |
|
| 1058 |
&uart2 { |
| 1059 |
pinctrl-names = "default"; |
| 1060 |
pinctrl-0 = <&uart2_pins>; |
| 1061 |
|
| 1062 |
bcm2048: bluetooth { |
| 1063 |
compatible = "brcm,bcm2048-nokia", "nokia,h4p-bluetooth"; |
| 1064 |
reset-gpios = <&gpio3 27 GPIO_ACTIVE_LOW>; /* 91 */ |
| 1065 |
host-wakeup-gpios = <&gpio4 5 GPIO_ACTIVE_HIGH>; /* 101 */ |
| 1066 |
bluetooth-wakeup-gpios = <&gpio2 5 GPIO_ACTIVE_HIGH>; /* 37 */ |
| 1067 |
clocks = <&vctcxo>; |
| 1068 |
clock-names = "sysclk"; |
| 1069 |
}; |
| 1070 |
}; |
| 1071 |
|
| 1072 |
&uart3 { |
| 1073 |
interrupts-extended = <&intc 74 &omap3_pmx_core OMAP3_UART3_RX>; |
| 1074 |
pinctrl-names = "default"; |
| 1075 |
pinctrl-0 = <&uart3_pins>; |
| 1076 |
}; |
| 1077 |
|
| 1078 |
&dss { |
| 1079 |
status = "okay"; |
| 1080 |
|
| 1081 |
pinctrl-names = "default"; |
| 1082 |
pinctrl-0 = <&dss_sdi_pins>; |
| 1083 |
|
| 1084 |
vdds_sdi-supply = <&vaux1>; |
| 1085 |
|
| 1086 |
ports { |
| 1087 |
#address-cells = <1>; |
| 1088 |
#size-cells = <0>; |
| 1089 |
|
| 1090 |
port@1 { |
| 1091 |
reg = <1>; |
| 1092 |
|
| 1093 |
sdi_out: endpoint { |
| 1094 |
remote-endpoint = <&lcd_in>; |
| 1095 |
datapairs = <2>; |
| 1096 |
}; |
| 1097 |
}; |
| 1098 |
}; |
| 1099 |
}; |
| 1100 |
|
| 1101 |
&venc { |
| 1102 |
status = "okay"; |
| 1103 |
|
| 1104 |
vdda-supply = <&vdac>; |
| 1105 |
|
| 1106 |
port { |
| 1107 |
venc_out: endpoint { |
| 1108 |
remote-endpoint = <&tv_connector_in>; |
| 1109 |
ti,channels = <1>; |
| 1110 |
}; |
| 1111 |
}; |
| 1112 |
}; |
| 1113 |
|
| 1114 |
&mcbsp2 { |
| 1115 |
status = "okay"; |
| 1116 |
}; |
| 1117 |
|
| 1118 |
&ssi_port1 { |
| 1119 |
pinctrl-names = "default"; |
| 1120 |
pinctrl-0 = <&ssi_pins>; |
| 1121 |
|
| 1122 |
ti,ssi-cawake-gpio = <&gpio5 23 GPIO_ACTIVE_HIGH>; /* 151 */ |
| 1123 |
|
| 1124 |
modem: hsi-client { |
| 1125 |
compatible = "nokia,n900-modem"; |
| 1126 |
|
| 1127 |
pinctrl-names = "default"; |
| 1128 |
pinctrl-0 = <&modem_pins>; |
| 1129 |
|
| 1130 |
hsi-channel-ids = <0>, <1>, <2>, <3>; |
| 1131 |
hsi-channel-names = "mcsaab-control", |
| 1132 |
"speech-control", |
| 1133 |
"speech-data", |
| 1134 |
"mcsaab-data"; |
| 1135 |
hsi-speed-kbps = <55000>; |
| 1136 |
hsi-mode = "frame"; |
| 1137 |
hsi-flow = "synchronized"; |
| 1138 |
hsi-arb-mode = "round-robin"; |
| 1139 |
|
| 1140 |
interrupts-extended = <&gpio3 8 IRQ_TYPE_EDGE_FALLING>; /* 72 */ |
| 1141 |
|
| 1142 |
gpios = <&gpio3 6 GPIO_ACTIVE_HIGH>, /* 70 */ |
| 1143 |
<&gpio3 9 GPIO_ACTIVE_HIGH>, /* 73 */ |
| 1144 |
<&gpio3 10 GPIO_ACTIVE_HIGH>, /* 74 */ |
| 1145 |
<&gpio3 11 GPIO_ACTIVE_HIGH>, /* 75 */ |
| 1146 |
<&gpio5 29 GPIO_ACTIVE_HIGH>; /* 157 */ |
| 1147 |
gpio-names = "cmt_apeslpx", |
| 1148 |
"cmt_rst_rq", |
| 1149 |
"cmt_en", |
| 1150 |
"cmt_rst", |
| 1151 |
"cmt_bsi"; |
| 1152 |
}; |
| 1153 |
}; |
| 1154 |
|
| 1155 |
&ssi_port2 { |
| 1156 |
status = "disabled"; |
| 1157 |
}; |