| 1 |
// SPDX-License-Identifier: GPL-2.0-only |
| 2 |
/* |
| 3 |
* Copyright (C) 2016 Texas Instruments Incorporated - https://www.ti.com/ |
| 4 |
*/ |
| 5 |
|
| 6 |
#include "dra71x.dtsi" |
| 7 |
#include "dra7-mmc-iodelay.dtsi" |
| 8 |
#include "dra72x-mmc-iodelay.dtsi" |
| 9 |
#include <dt-bindings/net/ti-dp83867.h> |
| 10 |
|
| 11 |
/ { |
| 12 |
compatible = "ti,dra718-evm", "ti,dra718", "ti,dra722", "ti,dra72", "ti,dra7"; |
| 13 |
model = "TI DRA718 EVM"; |
| 14 |
|
| 15 |
memory { |
| 16 |
device_type = "memory"; |
| 17 |
reg = <0x0 0x80000000 0x0 0x80000000>; /* 2GB */ |
| 18 |
}; |
| 19 |
|
| 20 |
reserved-memory { |
| 21 |
#address-cells = <2>; |
| 22 |
#size-cells = <2>; |
| 23 |
ranges; |
| 24 |
|
| 25 |
ipu2_memory_region: ipu2-memory@95800000 { |
| 26 |
compatible = "shared-dma-pool"; |
| 27 |
reg = <0x0 0x95800000 0x0 0x3800000>; |
| 28 |
reusable; |
| 29 |
status = "okay"; |
| 30 |
}; |
| 31 |
|
| 32 |
dsp1_memory_region: dsp1-memory@99000000 { |
| 33 |
compatible = "shared-dma-pool"; |
| 34 |
reg = <0x0 0x99000000 0x0 0x4000000>; |
| 35 |
reusable; |
| 36 |
status = "okay"; |
| 37 |
}; |
| 38 |
|
| 39 |
ipu1_memory_region: ipu1-memory@9d000000 { |
| 40 |
compatible = "shared-dma-pool"; |
| 41 |
reg = <0x0 0x9d000000 0x0 0x2000000>; |
| 42 |
reusable; |
| 43 |
status = "okay"; |
| 44 |
}; |
| 45 |
}; |
| 46 |
|
| 47 |
vpo_sd_1v8_3v3: gpio-regulator-TPS74801 { |
| 48 |
compatible = "regulator-gpio"; |
| 49 |
|
| 50 |
regulator-name = "vddshv8"; |
| 51 |
regulator-min-microvolt = <1800000>; |
| 52 |
regulator-max-microvolt = <3300000>; |
| 53 |
regulator-boot-on; |
| 54 |
vin-supply = <&evm_5v0>; |
| 55 |
|
| 56 |
gpios = <&gpio7 11 GPIO_ACTIVE_HIGH>; |
| 57 |
states = <1800000 0x0 |
| 58 |
3300000 0x1>; |
| 59 |
}; |
| 60 |
|
| 61 |
evm_1v8_sw: fixedregulator-evm_1v8 { |
| 62 |
compatible = "regulator-fixed"; |
| 63 |
regulator-name = "evm_1v8"; |
| 64 |
regulator-min-microvolt = <1800000>; |
| 65 |
regulator-max-microvolt = <1800000>; |
| 66 |
vin-supply = <&lp8732_buck0_reg>; |
| 67 |
regulator-always-on; |
| 68 |
regulator-boot-on; |
| 69 |
}; |
| 70 |
|
| 71 |
poweroff: gpio-poweroff { |
| 72 |
compatible = "gpio-poweroff"; |
| 73 |
gpios = <&gpio7 30 GPIO_ACTIVE_HIGH>; |
| 74 |
input; |
| 75 |
}; |
| 76 |
}; |
| 77 |
|
| 78 |
&i2c1 { |
| 79 |
status = "okay"; |
| 80 |
clock-frequency = <400000>; |
| 81 |
|
| 82 |
lp8733: lp8733@60 { |
| 83 |
compatible = "ti,lp8733"; |
| 84 |
reg = <0x60>; |
| 85 |
|
| 86 |
buck0-in-supply = <&vsys_3v3>; |
| 87 |
buck1-in-supply = <&vsys_3v3>; |
| 88 |
ldo0-in-supply = <&evm_5v0>; |
| 89 |
ldo1-in-supply = <&evm_5v0>; |
| 90 |
|
| 91 |
lp8733_regulators: regulators { |
| 92 |
lp8733_buck0_reg: buck0 { |
| 93 |
/* FB_B0 -> LP8733-BUCK1 - VPO_S1_AVS - VDD_CORE_AVS (core, mpu, gpu) */ |
| 94 |
regulator-name = "lp8733-buck0"; |
| 95 |
regulator-min-microvolt = <850000>; |
| 96 |
regulator-max-microvolt = <1250000>; |
| 97 |
regulator-always-on; |
| 98 |
regulator-boot-on; |
| 99 |
}; |
| 100 |
|
| 101 |
lp8733_buck1_reg: buck1 { |
| 102 |
/* FB_B1 -> LP8733-BUCK2 - VPO_S2_AVS - VDD_DSP_AVS (DSP/eve/iva) */ |
| 103 |
regulator-name = "lp8733-buck1"; |
| 104 |
regulator-min-microvolt = <850000>; |
| 105 |
regulator-max-microvolt = <1250000>; |
| 106 |
regulator-boot-on; |
| 107 |
regulator-always-on; |
| 108 |
}; |
| 109 |
|
| 110 |
lp8733_ldo0_reg: ldo0 { |
| 111 |
/* LDO0 -> LP8733-LDO1 - VPO_L1_3V3 - VDDSHV8 (optional) */ |
| 112 |
regulator-name = "lp8733-ldo0"; |
| 113 |
regulator-min-microvolt = <3300000>; |
| 114 |
regulator-max-microvolt = <3300000>; |
| 115 |
regulator-boot-on; |
| 116 |
regulator-always-on; |
| 117 |
}; |
| 118 |
|
| 119 |
lp8733_ldo1_reg: ldo1 { |
| 120 |
/* LDO1 -> LP8733-LDO2 - VPO_L2_3V3 - VDDA_USB3V3 */ |
| 121 |
regulator-name = "lp8733-ldo1"; |
| 122 |
regulator-min-microvolt = <3300000>; |
| 123 |
regulator-max-microvolt = <3300000>; |
| 124 |
regulator-always-on; |
| 125 |
regulator-boot-on; |
| 126 |
}; |
| 127 |
}; |
| 128 |
}; |
| 129 |
|
| 130 |
lp8732: lp8732@61 { |
| 131 |
compatible = "ti,lp8732"; |
| 132 |
reg = <0x61>; |
| 133 |
|
| 134 |
buck0-in-supply = <&vsys_3v3>; |
| 135 |
buck1-in-supply = <&vsys_3v3>; |
| 136 |
ldo0-in-supply = <&vsys_3v3>; |
| 137 |
ldo1-in-supply = <&vsys_3v3>; |
| 138 |
|
| 139 |
lp8732_regulators: regulators { |
| 140 |
lp8732_buck0_reg: buck0 { |
| 141 |
/* FB_B0 -> LP8732-BUCK1 - VPO_S3_1V8 - VDDS_1V8 */ |
| 142 |
regulator-name = "lp8732-buck0"; |
| 143 |
regulator-min-microvolt = <1800000>; |
| 144 |
regulator-max-microvolt = <1800000>; |
| 145 |
regulator-always-on; |
| 146 |
regulator-boot-on; |
| 147 |
}; |
| 148 |
|
| 149 |
lp8732_buck1_reg: buck1 { |
| 150 |
/* FB_B1 -> LP8732-BUCK2 - VPO_S4_DDR - VDD_DDR_1V35 */ |
| 151 |
regulator-name = "lp8732-buck1"; |
| 152 |
regulator-min-microvolt = <1350000>; |
| 153 |
regulator-max-microvolt = <1350000>; |
| 154 |
regulator-boot-on; |
| 155 |
regulator-always-on; |
| 156 |
}; |
| 157 |
|
| 158 |
lp8732_ldo0_reg: ldo0 { |
| 159 |
/* LDO0 -> LP8732-LDO1 - VPO_L3_1V8 - VDA_1V8_PLL */ |
| 160 |
regulator-name = "lp8732-ldo0"; |
| 161 |
regulator-min-microvolt = <1800000>; |
| 162 |
regulator-max-microvolt = <1800000>; |
| 163 |
regulator-boot-on; |
| 164 |
regulator-always-on; |
| 165 |
}; |
| 166 |
|
| 167 |
lp8732_ldo1_reg: ldo1 { |
| 168 |
/* LDO1 -> LP8732-LDO2 - VPO_L4_1V8 - VDA_1V8_PHY */ |
| 169 |
regulator-name = "lp8732-ldo1"; |
| 170 |
regulator-min-microvolt = <1800000>; |
| 171 |
regulator-max-microvolt = <1800000>; |
| 172 |
regulator-always-on; |
| 173 |
regulator-boot-on; |
| 174 |
}; |
| 175 |
}; |
| 176 |
}; |
| 177 |
}; |
| 178 |
|
| 179 |
&pcf_lcd { |
| 180 |
interrupt-parent = <&gpio7>; |
| 181 |
interrupts = <31 IRQ_TYPE_EDGE_FALLING>; |
| 182 |
}; |
| 183 |
|
| 184 |
&pcf_gpio_21 { |
| 185 |
interrupt-parent = <&gpio7>; |
| 186 |
interrupts = <31 IRQ_TYPE_EDGE_FALLING>; |
| 187 |
}; |
| 188 |
|
| 189 |
&pcf_hdmi { |
| 190 |
hdmi-i2c-disable-hog { |
| 191 |
/* |
| 192 |
* PM_OEn to High: Disable routing I2C3 to PM_I2C |
| 193 |
* With this PM_SEL(p3) should not matter |
| 194 |
*/ |
| 195 |
gpio-hog; |
| 196 |
gpios = <0 GPIO_ACTIVE_LOW>; |
| 197 |
output-high; |
| 198 |
line-name = "pm_oe_n"; |
| 199 |
}; |
| 200 |
}; |
| 201 |
|
| 202 |
&mmc1 { |
| 203 |
pinctrl-names = "default", "hs", "sdr12", "sdr25", "sdr50", "ddr50", "sdr104"; |
| 204 |
pinctrl-0 = <&mmc1_pins_default_no_clk_pu>; |
| 205 |
pinctrl-1 = <&mmc1_pins_hs>; |
| 206 |
pinctrl-2 = <&mmc1_pins_sdr12>; |
| 207 |
pinctrl-3 = <&mmc1_pins_sdr25>; |
| 208 |
pinctrl-4 = <&mmc1_pins_sdr50>; |
| 209 |
pinctrl-5 = <&mmc1_pins_ddr50_rev20 &mmc1_iodelay_ddr50_conf>; |
| 210 |
pinctrl-6 = <&mmc1_pins_sdr104 &mmc1_iodelay_sdr104_rev20_conf>; |
| 211 |
vqmmc-supply = <&vpo_sd_1v8_3v3>; |
| 212 |
}; |
| 213 |
|
| 214 |
&mmc2 { |
| 215 |
pinctrl-names = "default", "hs", "ddr_1_8v", "hs200_1_8v"; |
| 216 |
pinctrl-0 = <&mmc2_pins_default>; |
| 217 |
pinctrl-1 = <&mmc2_pins_hs>; |
| 218 |
pinctrl-2 = <&mmc2_pins_ddr_rev20 &mmc2_iodelay_ddr_conf>; |
| 219 |
pinctrl-3 = <&mmc2_pins_hs200 &mmc2_iodelay_hs200_rev20_conf>; |
| 220 |
vmmc-supply = <&evm_1v8_sw>; |
| 221 |
vqmmc-supply = <&evm_1v8_sw>; |
| 222 |
}; |
| 223 |
|
| 224 |
&mac_sw { |
| 225 |
mode-gpios = <&pcf_gpio_21 4 GPIO_ACTIVE_LOW>, |
| 226 |
<&pcf_hdmi 9 GPIO_ACTIVE_LOW>, /* P11 */ |
| 227 |
<&pcf_hdmi 10 GPIO_ACTIVE_LOW>; /* P12 */ |
| 228 |
status = "okay"; |
| 229 |
}; |
| 230 |
|
| 231 |
&cpsw_port1 { |
| 232 |
phy-handle = <&dp83867_0>; |
| 233 |
phy-mode = "rgmii-id"; |
| 234 |
ti,dual-emac-pvid = <1>; |
| 235 |
}; |
| 236 |
|
| 237 |
&cpsw_port2 { |
| 238 |
phy-handle = <&dp83867_1>; |
| 239 |
phy-mode = "rgmii-id"; |
| 240 |
ti,dual-emac-pvid = <2>; |
| 241 |
}; |
| 242 |
|
| 243 |
&davinci_mdio_sw { |
| 244 |
dp83867_0: ethernet-phy@2 { |
| 245 |
reg = <2>; |
| 246 |
ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>; |
| 247 |
ti,tx-internal-delay = <DP83867_RGMIIDCTL_250_PS>; |
| 248 |
ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_8_B_NIB>; |
| 249 |
ti,min-output-impedance; |
| 250 |
ti,dp83867-rxctrl-strap-quirk; |
| 251 |
}; |
| 252 |
|
| 253 |
dp83867_1: ethernet-phy@3 { |
| 254 |
reg = <3>; |
| 255 |
ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>; |
| 256 |
ti,tx-internal-delay = <DP83867_RGMIIDCTL_250_PS>; |
| 257 |
ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_8_B_NIB>; |
| 258 |
ti,min-output-impedance; |
| 259 |
ti,dp83867-rxctrl-strap-quirk; |
| 260 |
}; |
| 261 |
}; |
| 262 |
|
| 263 |
/* No Sata on this device */ |
| 264 |
&sata_phy { |
| 265 |
status = "disabled"; |
| 266 |
}; |
| 267 |
|
| 268 |
&sata { |
| 269 |
status = "disabled"; |
| 270 |
}; |
| 271 |
|
| 272 |
/* No RTC on this device */ |
| 273 |
&rtc { |
| 274 |
status = "disabled"; |
| 275 |
}; |
| 276 |
|
| 277 |
&usb2_phy1 { |
| 278 |
phy-supply = <&lp8733_ldo1_reg>; |
| 279 |
}; |
| 280 |
|
| 281 |
&usb2_phy2 { |
| 282 |
phy-supply = <&lp8733_ldo1_reg>; |
| 283 |
}; |
| 284 |
|
| 285 |
&dss { |
| 286 |
/* Supplied by VDA_1V8_PLL */ |
| 287 |
vdda_video-supply = <&lp8732_ldo0_reg>; |
| 288 |
}; |
| 289 |
|
| 290 |
&hdmi { |
| 291 |
/* Supplied by VDA_1V8_PHY */ |
| 292 |
vdda_video-supply = <&lp8732_ldo1_reg>; |
| 293 |
}; |
| 294 |
|
| 295 |
&extcon_usb1 { |
| 296 |
vbus-gpios = <&pcf_lcd 14 GPIO_ACTIVE_HIGH>; |
| 297 |
}; |
| 298 |
|
| 299 |
&extcon_usb2 { |
| 300 |
vbus-gpios = <&pcf_lcd 15 GPIO_ACTIVE_HIGH>; |
| 301 |
}; |
| 302 |
|
| 303 |
&ipu2 { |
| 304 |
status = "okay"; |
| 305 |
memory-region = <&ipu2_memory_region>; |
| 306 |
}; |
| 307 |
|
| 308 |
&ipu1 { |
| 309 |
status = "okay"; |
| 310 |
memory-region = <&ipu1_memory_region>; |
| 311 |
}; |
| 312 |
|
| 313 |
&dsp1 { |
| 314 |
status = "okay"; |
| 315 |
memory-region = <&dsp1_memory_region>; |
| 316 |
}; |