| 1 |
// SPDX-License-Identifier: GPL-2.0-only |
| 2 |
/* |
| 3 |
* Copyright (C) 2016 Paul Kocialkowski <[email protected]> |
| 4 |
*/ |
| 5 |
/dts-v1/; |
| 6 |
|
| 7 |
#include "omap443x.dtsi" |
| 8 |
|
| 9 |
/ { |
| 10 |
model = "Amazon Kindle Fire (first generation)"; |
| 11 |
compatible = "amazon,omap4-kc1", "ti,omap4430", "ti,omap4"; |
| 12 |
|
| 13 |
memory@80000000 { |
| 14 |
device_type = "memory"; |
| 15 |
reg = <0x80000000 0x20000000>; /* 512 MB */ |
| 16 |
}; |
| 17 |
|
| 18 |
led-controller { |
| 19 |
compatible = "pwm-leds"; |
| 20 |
|
| 21 |
led-1 { |
| 22 |
label = "green"; |
| 23 |
pwms = <&twl_pwm 0 7812500>; |
| 24 |
max-brightness = <127>; |
| 25 |
}; |
| 26 |
|
| 27 |
led-2 { |
| 28 |
label = "orange"; |
| 29 |
pwms = <&twl_pwm 1 7812500>; |
| 30 |
max-brightness = <127>; |
| 31 |
}; |
| 32 |
}; |
| 33 |
}; |
| 34 |
|
| 35 |
&omap4_pmx_core { |
| 36 |
pinctrl-names = "default"; |
| 37 |
|
| 38 |
uart3_pins: uart3-pins { |
| 39 |
pinctrl-single,pins = < |
| 40 |
OMAP4_IOPAD(0x144, PIN_INPUT | MUX_MODE0) /* uart3_rx_irrx */ |
| 41 |
OMAP4_IOPAD(0x146, PIN_OUTPUT | MUX_MODE0) /* uart3_tx_irtx */ |
| 42 |
>; |
| 43 |
}; |
| 44 |
|
| 45 |
i2c1_pins: i2c1-pins { |
| 46 |
pinctrl-single,pins = < |
| 47 |
OMAP4_IOPAD(0x122, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_scl */ |
| 48 |
OMAP4_IOPAD(0x124, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_sda */ |
| 49 |
>; |
| 50 |
}; |
| 51 |
|
| 52 |
i2c2_pins: i2c2-pins { |
| 53 |
pinctrl-single,pins = < |
| 54 |
OMAP4_IOPAD(0x126, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c2_scl */ |
| 55 |
OMAP4_IOPAD(0x128, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c2_sda */ |
| 56 |
>; |
| 57 |
}; |
| 58 |
|
| 59 |
i2c3_pins: i2c3-pins { |
| 60 |
pinctrl-single,pins = < |
| 61 |
OMAP4_IOPAD(0x12a, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c3_scl */ |
| 62 |
OMAP4_IOPAD(0x12c, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c3_sda */ |
| 63 |
>; |
| 64 |
}; |
| 65 |
|
| 66 |
i2c4_pins: i2c4-pins { |
| 67 |
pinctrl-single,pins = < |
| 68 |
OMAP4_IOPAD(0x12e, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c4_scl */ |
| 69 |
OMAP4_IOPAD(0x130, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c4_sda */ |
| 70 |
>; |
| 71 |
}; |
| 72 |
|
| 73 |
mmc2_pins: mmc2-pins { |
| 74 |
pinctrl-single,pins = < |
| 75 |
OMAP4_IOPAD(0x040, PIN_INPUT_PULLUP | MUX_MODE1) /* sdmmc2_dat0 */ |
| 76 |
OMAP4_IOPAD(0x042, PIN_INPUT_PULLUP | MUX_MODE1) /* sdmmc2_dat1 */ |
| 77 |
OMAP4_IOPAD(0x044, PIN_INPUT_PULLUP | MUX_MODE1) /* sdmmc2_dat2 */ |
| 78 |
OMAP4_IOPAD(0x046, PIN_INPUT_PULLUP | MUX_MODE1) /* sdmmc2_dat3 */ |
| 79 |
OMAP4_IOPAD(0x048, PIN_INPUT_PULLUP | MUX_MODE1) /* sdmmc2_dat4 */ |
| 80 |
OMAP4_IOPAD(0x04a, PIN_INPUT_PULLUP | MUX_MODE1) /* sdmmc2_dat5 */ |
| 81 |
OMAP4_IOPAD(0x04c, PIN_INPUT_PULLUP | MUX_MODE1) /* sdmmc2_dat6 */ |
| 82 |
OMAP4_IOPAD(0x04e, PIN_INPUT_PULLUP | MUX_MODE1) /* sdmmc2_dat7 */ |
| 83 |
OMAP4_IOPAD(0x082, PIN_INPUT_PULLUP | MUX_MODE1) /* sdmmc2_clk */ |
| 84 |
OMAP4_IOPAD(0x084, PIN_INPUT_PULLUP | MUX_MODE1) /* sdmmc2_cmd */ |
| 85 |
>; |
| 86 |
}; |
| 87 |
|
| 88 |
usb_otg_hs_pins: usb-otg-hs-pins { |
| 89 |
pinctrl-single,pins = < |
| 90 |
OMAP4_IOPAD(0x194, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* usba0_otg_ce */ |
| 91 |
OMAP4_IOPAD(0x196, PIN_INPUT | MUX_MODE0) /* usba0_otg_dp */ |
| 92 |
OMAP4_IOPAD(0x198, PIN_INPUT | MUX_MODE0) /* usba0_otg_dm */ |
| 93 |
>; |
| 94 |
}; |
| 95 |
}; |
| 96 |
|
| 97 |
&uart3 { |
| 98 |
pinctrl-names = "default"; |
| 99 |
pinctrl-0 = <&uart3_pins>; |
| 100 |
|
| 101 |
interrupts-extended = <&wakeupgen GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH |
| 102 |
&omap4_pmx_core OMAP4_UART3_RX>; |
| 103 |
}; |
| 104 |
|
| 105 |
&i2c1 { |
| 106 |
pinctrl-names = "default"; |
| 107 |
pinctrl-0 = <&i2c1_pins>; |
| 108 |
|
| 109 |
clock-frequency = <400000>; |
| 110 |
|
| 111 |
twl: twl@48 { |
| 112 |
reg = <0x48>; |
| 113 |
/* IRQ# = 7 */ |
| 114 |
interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; /* IRQ_SYS_1N cascaded to gic */ |
| 115 |
system-power-controller; |
| 116 |
}; |
| 117 |
}; |
| 118 |
|
| 119 |
&i2c2 { |
| 120 |
pinctrl-names = "default"; |
| 121 |
pinctrl-0 = <&i2c2_pins>; |
| 122 |
|
| 123 |
clock-frequency = <400000>; |
| 124 |
}; |
| 125 |
|
| 126 |
&i2c3 { |
| 127 |
pinctrl-names = "default"; |
| 128 |
pinctrl-0 = <&i2c3_pins>; |
| 129 |
|
| 130 |
clock-frequency = <400000>; |
| 131 |
}; |
| 132 |
|
| 133 |
&i2c4 { |
| 134 |
pinctrl-names = "default"; |
| 135 |
pinctrl-0 = <&i2c4_pins>; |
| 136 |
|
| 137 |
clock-frequency = <400000>; |
| 138 |
}; |
| 139 |
|
| 140 |
&mmc1 { |
| 141 |
status = "disabled"; |
| 142 |
}; |
| 143 |
|
| 144 |
&mmc2 { |
| 145 |
pinctrl-names = "default"; |
| 146 |
pinctrl-0 = <&mmc2_pins>; |
| 147 |
|
| 148 |
vmmc-supply = <&vaux1>; |
| 149 |
ti,non-removable; |
| 150 |
bus-width = <8>; |
| 151 |
}; |
| 152 |
|
| 153 |
&mmc3 { |
| 154 |
status = "disabled"; |
| 155 |
}; |
| 156 |
|
| 157 |
&mmc4 { |
| 158 |
status = "disabled"; |
| 159 |
}; |
| 160 |
|
| 161 |
&usb_otg_hs { |
| 162 |
pinctrl-names = "default"; |
| 163 |
pinctrl-0 = <&usb_otg_hs_pins>; |
| 164 |
|
| 165 |
interface-type = <1>; |
| 166 |
mode = <3>; |
| 167 |
power = <50>; |
| 168 |
}; |
| 169 |
|
| 170 |
#include "twl6030.dtsi" |
| 171 |
#include "twl6030_omap4.dtsi" |
| 172 |
|
| 173 |
&twl_usb_comparator { |
| 174 |
usb-supply = <&vusb>; |
| 175 |
}; |