| 1 |
// SPDX-License-Identifier: GPL-2.0 |
| 2 |
/* |
| 3 |
* Common file for omap dpi panels with QVGA and reset pins |
| 4 |
* |
| 5 |
* Note that the board specifc DTS file needs to specify |
| 6 |
* at minimum the GPIO enable-gpios for display, and |
| 7 |
* gpios for gpio-backlight. |
| 8 |
*/ |
| 9 |
|
| 10 |
/ { |
| 11 |
aliases { |
| 12 |
display0 = &lcd0; |
| 13 |
}; |
| 14 |
|
| 15 |
backlight0: backlight { |
| 16 |
compatible = "gpio-backlight"; |
| 17 |
default-on; |
| 18 |
}; |
| 19 |
|
| 20 |
/* 3.3V GPIO controlled regulator for LCD_ENVDD */ |
| 21 |
lcd_3v3: regulator-lcd-3v3 { |
| 22 |
compatible = "regulator-fixed"; |
| 23 |
regulator-name = "lcd_3v3"; |
| 24 |
regulator-min-microvolt = <3300000>; |
| 25 |
regulator-max-microvolt = <3300000>; |
| 26 |
startup-delay-us = <70000>; |
| 27 |
}; |
| 28 |
|
| 29 |
lcd0: display { |
| 30 |
compatible = "sharp,ls037v7dw01"; |
| 31 |
label = "lcd"; |
| 32 |
power-supply = <&lcd_3v3>; |
| 33 |
envdd-supply = <&lcd_3v3>; |
| 34 |
|
| 35 |
port { |
| 36 |
lcd_in: endpoint { |
| 37 |
remote-endpoint = <&dpi_out>; |
| 38 |
}; |
| 39 |
}; |
| 40 |
}; |
| 41 |
}; |
| 42 |
|
| 43 |
/* Needed to power the DPI pins */ |
| 44 |
&vpll2 { |
| 45 |
regulator-always-on; |
| 46 |
}; |
| 47 |
|
| 48 |
&dss { |
| 49 |
status = "okay"; |
| 50 |
port { |
| 51 |
dpi_out: endpoint { |
| 52 |
remote-endpoint = <&lcd_in>; |
| 53 |
data-lines = <18>; |
| 54 |
}; |
| 55 |
}; |
| 56 |
}; |
| 57 |
|
| 58 |
&mcspi1 { |
| 59 |
tsc2046@0 { |
| 60 |
reg = <0>; /* CS0 */ |
| 61 |
compatible = "ti,tsc2046"; |
| 62 |
spi-max-frequency = <1000000>; |
| 63 |
vcc-supply = <&lcd_3v3>; |
| 64 |
ti,x-min = /bits/ 16 <0>; |
| 65 |
ti,x-max = /bits/ 16 <8000>; |
| 66 |
ti,y-min = /bits/ 16 <0>; |
| 67 |
ti,y-max = /bits/ 16 <4800>; |
| 68 |
ti,x-plate-ohms = /bits/ 16 <40>; |
| 69 |
ti,pressure-max = /bits/ 16 <255>; |
| 70 |
ti,swap-xy; |
| 71 |
wakeup-source; |
| 72 |
}; |
| 73 |
}; |