| 1 |
// SPDX-License-Identifier: GPL-2.0 |
| 2 |
/* |
| 3 |
* Common support for CompuLab CM-T3x CoMs |
| 4 |
*/ |
| 5 |
|
| 6 |
/ { |
| 7 |
|
| 8 |
memory@80000000 { |
| 9 |
device_type = "memory"; |
| 10 |
reg = <0x80000000 0x10000000>; /* 256 MB */ |
| 11 |
}; |
| 12 |
|
| 13 |
leds { |
| 14 |
compatible = "gpio-leds"; |
| 15 |
pinctrl-names = "default"; |
| 16 |
pinctrl-0 = <&green_led_pins>; |
| 17 |
ledb { |
| 18 |
label = "cm-t3x:green"; |
| 19 |
gpios = <&gpio6 26 GPIO_ACTIVE_HIGH>; /* gpio186 */ |
| 20 |
linux,default-trigger = "heartbeat"; |
| 21 |
}; |
| 22 |
}; |
| 23 |
|
| 24 |
/* HS USB Port 1 Power */ |
| 25 |
hsusb1_power: hsusb1_power_reg { |
| 26 |
compatible = "regulator-fixed"; |
| 27 |
regulator-name = "hsusb1_vbus"; |
| 28 |
regulator-min-microvolt = <3300000>; |
| 29 |
regulator-max-microvolt = <3300000>; |
| 30 |
startup-delay-us = <70000>; |
| 31 |
}; |
| 32 |
|
| 33 |
/* HS USB Port 2 Power */ |
| 34 |
hsusb2_power: hsusb2_power_reg { |
| 35 |
compatible = "regulator-fixed"; |
| 36 |
regulator-name = "hsusb2_vbus"; |
| 37 |
regulator-min-microvolt = <3300000>; |
| 38 |
regulator-max-microvolt = <3300000>; |
| 39 |
startup-delay-us = <70000>; |
| 40 |
}; |
| 41 |
|
| 42 |
/* HS USB Host PHY on PORT 1 */ |
| 43 |
hsusb1_phy: hsusb1_phy { |
| 44 |
compatible = "usb-nop-xceiv"; |
| 45 |
vcc-supply = <&hsusb1_power>; |
| 46 |
#phy-cells = <0>; |
| 47 |
}; |
| 48 |
|
| 49 |
/* HS USB Host PHY on PORT 2 */ |
| 50 |
hsusb2_phy: hsusb2-phy-pins { |
| 51 |
compatible = "usb-nop-xceiv"; |
| 52 |
vcc-supply = <&hsusb2_power>; |
| 53 |
#phy-cells = <0>; |
| 54 |
}; |
| 55 |
|
| 56 |
ads7846reg: ads7846-reg { |
| 57 |
compatible = "regulator-fixed"; |
| 58 |
regulator-name = "ads7846-reg"; |
| 59 |
regulator-min-microvolt = <3300000>; |
| 60 |
regulator-max-microvolt = <3300000>; |
| 61 |
}; |
| 62 |
|
| 63 |
tv0: svideo-connector { |
| 64 |
compatible = "svideo-connector"; |
| 65 |
label = "tv"; |
| 66 |
|
| 67 |
port { |
| 68 |
tv_connector_in: endpoint { |
| 69 |
remote-endpoint = <&venc_out>; |
| 70 |
}; |
| 71 |
}; |
| 72 |
}; |
| 73 |
}; |
| 74 |
|
| 75 |
&omap3_pmx_core { |
| 76 |
|
| 77 |
uart3_pins: uart3-pins { |
| 78 |
pinctrl-single,pins = < |
| 79 |
OMAP3_CORE1_IOPAD(0x219e, PIN_INPUT | MUX_MODE0) /* uart3_rx_irrx.uart3_rx_irrx */ |
| 80 |
OMAP3_CORE1_IOPAD(0x21a0, PIN_OUTPUT | MUX_MODE0) /* uart3_tx_irtx.uart3_tx_irtx */ |
| 81 |
>; |
| 82 |
}; |
| 83 |
|
| 84 |
mmc1_pins: mmc1-pins { |
| 85 |
pinctrl-single,pins = < |
| 86 |
OMAP3_CORE1_IOPAD(0x2144, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_clk.sdmmc1_clk */ |
| 87 |
OMAP3_CORE1_IOPAD(0x2146, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_cmd.sdmmc1_cmd */ |
| 88 |
OMAP3_CORE1_IOPAD(0x2148, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat0.sdmmc1_dat0 */ |
| 89 |
OMAP3_CORE1_IOPAD(0x214a, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat1.sdmmc1_dat1 */ |
| 90 |
OMAP3_CORE1_IOPAD(0x214c, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat2.sdmmc1_dat2 */ |
| 91 |
OMAP3_CORE1_IOPAD(0x214e, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat3.sdmmc1_dat3 */ |
| 92 |
>; |
| 93 |
}; |
| 94 |
|
| 95 |
green_led_pins: green-led-pins { |
| 96 |
pinctrl-single,pins = < |
| 97 |
OMAP3_CORE1_IOPAD(0x21e2, PIN_OUTPUT | MUX_MODE4) /* sys_clkout2.gpio_186 */ |
| 98 |
>; |
| 99 |
}; |
| 100 |
|
| 101 |
dss_dpi_pins_common: dss-dpi-common-pins { |
| 102 |
pinctrl-single,pins = < |
| 103 |
OMAP3_CORE1_IOPAD(0x20d4, PIN_OUTPUT | MUX_MODE0) /* dss_pclk.dss_pclk */ |
| 104 |
OMAP3_CORE1_IOPAD(0x20d6, PIN_OUTPUT | MUX_MODE0) /* dss_hsync.dss_hsync */ |
| 105 |
OMAP3_CORE1_IOPAD(0x20d8, PIN_OUTPUT | MUX_MODE0) /* dss_vsync.dss_vsync */ |
| 106 |
OMAP3_CORE1_IOPAD(0x20da, PIN_OUTPUT | MUX_MODE0) /* dss_acbias.dss_acbias */ |
| 107 |
|
| 108 |
OMAP3_CORE1_IOPAD(0x20e8, PIN_OUTPUT | MUX_MODE0) /* dss_data6.dss_data6 */ |
| 109 |
OMAP3_CORE1_IOPAD(0x20ea, PIN_OUTPUT | MUX_MODE0) /* dss_data7.dss_data7 */ |
| 110 |
OMAP3_CORE1_IOPAD(0x20ec, PIN_OUTPUT | MUX_MODE0) /* dss_data8.dss_data8 */ |
| 111 |
OMAP3_CORE1_IOPAD(0x20ee, PIN_OUTPUT | MUX_MODE0) /* dss_data9.dss_data9 */ |
| 112 |
OMAP3_CORE1_IOPAD(0x20f0, PIN_OUTPUT | MUX_MODE0) /* dss_data10.dss_data10 */ |
| 113 |
OMAP3_CORE1_IOPAD(0x20f2, PIN_OUTPUT | MUX_MODE0) /* dss_data11.dss_data11 */ |
| 114 |
OMAP3_CORE1_IOPAD(0x20f4, PIN_OUTPUT | MUX_MODE0) /* dss_data12.dss_data12 */ |
| 115 |
OMAP3_CORE1_IOPAD(0x20f6, PIN_OUTPUT | MUX_MODE0) /* dss_data13.dss_data13 */ |
| 116 |
OMAP3_CORE1_IOPAD(0x20f8, PIN_OUTPUT | MUX_MODE0) /* dss_data14.dss_data14 */ |
| 117 |
OMAP3_CORE1_IOPAD(0x20fa, PIN_OUTPUT | MUX_MODE0) /* dss_data15.dss_data15 */ |
| 118 |
OMAP3_CORE1_IOPAD(0x20fc, PIN_OUTPUT | MUX_MODE0) /* dss_data16.dss_data16 */ |
| 119 |
OMAP3_CORE1_IOPAD(0x20fe, PIN_OUTPUT | MUX_MODE0) /* dss_data17.dss_data17 */ |
| 120 |
OMAP3_CORE1_IOPAD(0x2100, PIN_OUTPUT | MUX_MODE0) /* dss_data18.dss_data18 */ |
| 121 |
OMAP3_CORE1_IOPAD(0x2102, PIN_OUTPUT | MUX_MODE0) /* dss_data19.dss_data19 */ |
| 122 |
OMAP3_CORE1_IOPAD(0x2104, PIN_OUTPUT | MUX_MODE0) /* dss_data20.dss_data20 */ |
| 123 |
OMAP3_CORE1_IOPAD(0x2106, PIN_OUTPUT | MUX_MODE0) /* dss_data21.dss_data21 */ |
| 124 |
OMAP3_CORE1_IOPAD(0x2108, PIN_OUTPUT | MUX_MODE0) /* dss_data22.dss_data22 */ |
| 125 |
OMAP3_CORE1_IOPAD(0x210a, PIN_OUTPUT | MUX_MODE0) /* dss_data23.dss_data23 */ |
| 126 |
>; |
| 127 |
}; |
| 128 |
|
| 129 |
dss_dpi_pins_cm_t35x: dss-dpi-cm-t35x-pins { |
| 130 |
pinctrl-single,pins = < |
| 131 |
OMAP3_CORE1_IOPAD(0x20dc, PIN_OUTPUT | MUX_MODE0) /* dss_data0.dss_data0 */ |
| 132 |
OMAP3_CORE1_IOPAD(0x20de, PIN_OUTPUT | MUX_MODE0) /* dss_data1.dss_data1 */ |
| 133 |
OMAP3_CORE1_IOPAD(0x20e0, PIN_OUTPUT | MUX_MODE0) /* dss_data2.dss_data2 */ |
| 134 |
OMAP3_CORE1_IOPAD(0x20e2, PIN_OUTPUT | MUX_MODE0) /* dss_data3.dss_data3 */ |
| 135 |
OMAP3_CORE1_IOPAD(0x20e4, PIN_OUTPUT | MUX_MODE0) /* dss_data4.dss_data4 */ |
| 136 |
OMAP3_CORE1_IOPAD(0x20e6, PIN_OUTPUT | MUX_MODE0) /* dss_data5.dss_data5 */ |
| 137 |
>; |
| 138 |
}; |
| 139 |
|
| 140 |
ads7846_pins: ads7846-pins { |
| 141 |
pinctrl-single,pins = < |
| 142 |
OMAP3_CORE1_IOPAD(0x20ba, PIN_INPUT_PULLUP | MUX_MODE4) /* gpmc_ncs6.gpio_57 */ |
| 143 |
>; |
| 144 |
}; |
| 145 |
|
| 146 |
mcspi1_pins: mcspi1-pins { |
| 147 |
pinctrl-single,pins = < |
| 148 |
OMAP3_CORE1_IOPAD(0x21c8, PIN_INPUT | MUX_MODE0) /* mcspi1_clk */ |
| 149 |
OMAP3_CORE1_IOPAD(0x21ca, PIN_INPUT | MUX_MODE0) /* mcspi1_simo */ |
| 150 |
OMAP3_CORE1_IOPAD(0x21cc, PIN_INPUT | MUX_MODE0) /* mcspi1_somi */ |
| 151 |
OMAP3_CORE1_IOPAD(0x21ce, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcspi1_cs0 */ |
| 152 |
>; |
| 153 |
}; |
| 154 |
|
| 155 |
i2c1_pins: i2c1-pins { |
| 156 |
pinctrl-single,pins = < |
| 157 |
OMAP3_CORE1_IOPAD(0x21ba, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_scl */ |
| 158 |
OMAP3_CORE1_IOPAD(0x21bc, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_sda */ |
| 159 |
>; |
| 160 |
}; |
| 161 |
|
| 162 |
mcbsp2_pins: mcbsp2-pins { |
| 163 |
pinctrl-single,pins = < |
| 164 |
OMAP3_CORE1_IOPAD(0x213c, PIN_INPUT | MUX_MODE0) /* mcbsp2_fsx */ |
| 165 |
OMAP3_CORE1_IOPAD(0x213e, PIN_INPUT | MUX_MODE0) /* mcbsp2_clkx */ |
| 166 |
OMAP3_CORE1_IOPAD(0x2140, PIN_INPUT | MUX_MODE0) /* mcbsp2_dr */ |
| 167 |
OMAP3_CORE1_IOPAD(0x2142, PIN_OUTPUT | MUX_MODE0) /* mcbsp2_dx */ |
| 168 |
>; |
| 169 |
}; |
| 170 |
}; |
| 171 |
|
| 172 |
&uart3 { |
| 173 |
pinctrl-names = "default"; |
| 174 |
pinctrl-0 = <&uart3_pins>; |
| 175 |
}; |
| 176 |
|
| 177 |
&mmc1 { |
| 178 |
pinctrl-names = "default"; |
| 179 |
pinctrl-0 = <&mmc1_pins>; |
| 180 |
bus-width = <4>; |
| 181 |
}; |
| 182 |
|
| 183 |
&mmc3 { |
| 184 |
status = "disabled"; |
| 185 |
}; |
| 186 |
|
| 187 |
&i2c1 { |
| 188 |
pinctrl-names = "default"; |
| 189 |
pinctrl-0 = <&i2c1_pins>; |
| 190 |
|
| 191 |
clock-frequency = <400000>; |
| 192 |
|
| 193 |
eeprom@50 { |
| 194 |
compatible = "atmel,24c02"; |
| 195 |
pagesize = <16>; |
| 196 |
reg = <0x50>; |
| 197 |
}; |
| 198 |
}; |
| 199 |
|
| 200 |
&i2c3 { |
| 201 |
clock-frequency = <400000>; |
| 202 |
}; |
| 203 |
|
| 204 |
&usbhshost { |
| 205 |
port1-mode = "ehci-phy"; |
| 206 |
port2-mode = "ehci-phy"; |
| 207 |
}; |
| 208 |
|
| 209 |
&usbhsehci { |
| 210 |
phys = <&hsusb1_phy &hsusb2_phy>; |
| 211 |
}; |
| 212 |
|
| 213 |
&mcspi1 { |
| 214 |
pinctrl-names = "default"; |
| 215 |
pinctrl-0 = <&mcspi1_pins>; |
| 216 |
|
| 217 |
/* touch controller */ |
| 218 |
ads7846@0 { |
| 219 |
pinctrl-names = "default"; |
| 220 |
pinctrl-0 = <&ads7846_pins>; |
| 221 |
|
| 222 |
compatible = "ti,ads7846"; |
| 223 |
vcc-supply = <&ads7846reg>; |
| 224 |
|
| 225 |
reg = <0>; /* CS0 */ |
| 226 |
spi-max-frequency = <1500000>; |
| 227 |
|
| 228 |
interrupt-parent = <&gpio2>; |
| 229 |
interrupts = <25 0>; /* gpio_57 */ |
| 230 |
pendown-gpio = <&gpio2 25 GPIO_ACTIVE_LOW>; |
| 231 |
|
| 232 |
ti,x-min = /bits/ 16 <0x0>; |
| 233 |
ti,x-max = /bits/ 16 <0x0fff>; |
| 234 |
ti,y-min = /bits/ 16 <0x0>; |
| 235 |
ti,y-max = /bits/ 16 <0x0fff>; |
| 236 |
|
| 237 |
ti,x-plate-ohms = /bits/ 16 <180>; |
| 238 |
ti,pressure-max = /bits/ 16 <255>; |
| 239 |
|
| 240 |
ti,debounce-max = /bits/ 16 <30>; |
| 241 |
ti,debounce-tol = /bits/ 16 <10>; |
| 242 |
ti,debounce-rep = /bits/ 16 <1>; |
| 243 |
|
| 244 |
wakeup-source; |
| 245 |
}; |
| 246 |
}; |
| 247 |
|
| 248 |
&venc { |
| 249 |
status = "okay"; |
| 250 |
|
| 251 |
port { |
| 252 |
venc_out: endpoint { |
| 253 |
remote-endpoint = <&tv_connector_in>; |
| 254 |
ti,channels = <2>; |
| 255 |
}; |
| 256 |
}; |
| 257 |
}; |
| 258 |
|
| 259 |
&mcbsp2 { |
| 260 |
status = "okay"; |
| 261 |
|
| 262 |
pinctrl-names = "default"; |
| 263 |
pinctrl-0 = <&mcbsp2_pins>; |
| 264 |
}; |
| 265 |
|
| 266 |
&gpmc { |
| 267 |
ranges = <0 0 0x30000000 0x01000000>; /* CS0: 16MB for NAND */ |
| 268 |
|
| 269 |
nand@0,0 { |
| 270 |
compatible = "ti,omap2-nand"; |
| 271 |
reg = <0 0 4>; /* CS0, offset 0, IO size 4 */ |
| 272 |
interrupt-parent = <&gpmc>; |
| 273 |
interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */ |
| 274 |
<1 IRQ_TYPE_NONE>; /* termcount */ |
| 275 |
nand-bus-width = <8>; |
| 276 |
gpmc,device-width = <1>; |
| 277 |
ti,nand-ecc-opt = "sw"; |
| 278 |
|
| 279 |
gpmc,cs-on-ns = <0>; |
| 280 |
gpmc,cs-rd-off-ns = <120>; |
| 281 |
gpmc,cs-wr-off-ns = <120>; |
| 282 |
|
| 283 |
gpmc,adv-on-ns = <0>; |
| 284 |
gpmc,adv-rd-off-ns = <120>; |
| 285 |
gpmc,adv-wr-off-ns = <120>; |
| 286 |
|
| 287 |
gpmc,we-on-ns = <6>; |
| 288 |
gpmc,we-off-ns = <90>; |
| 289 |
|
| 290 |
gpmc,oe-on-ns = <6>; |
| 291 |
gpmc,oe-off-ns = <90>; |
| 292 |
|
| 293 |
gpmc,page-burst-access-ns = <6>; |
| 294 |
gpmc,access-ns = <72>; |
| 295 |
gpmc,cycle2cycle-delay-ns = <60>; |
| 296 |
|
| 297 |
gpmc,rd-cycle-ns = <120>; |
| 298 |
gpmc,wr-cycle-ns = <120>; |
| 299 |
gpmc,wr-access-ns = <186>; |
| 300 |
gpmc,wr-data-mux-bus-ns = <90>; |
| 301 |
|
| 302 |
#address-cells = <1>; |
| 303 |
#size-cells = <1>; |
| 304 |
|
| 305 |
partition@0 { |
| 306 |
label = "xloader"; |
| 307 |
reg = <0 0x80000>; |
| 308 |
}; |
| 309 |
partition@80000 { |
| 310 |
label = "uboot"; |
| 311 |
reg = <0x80000 0x1e0000>; |
| 312 |
}; |
| 313 |
partition@260000 { |
| 314 |
label = "uboot environment"; |
| 315 |
reg = <0x260000 0x40000>; |
| 316 |
}; |
| 317 |
partition@2a0000 { |
| 318 |
label = "linux"; |
| 319 |
reg = <0x2a0000 0x400000>; |
| 320 |
}; |
| 321 |
partition@6a0000 { |
| 322 |
label = "rootfs"; |
| 323 |
reg = <0x6a0000 0x1f880000>; |
| 324 |
}; |
| 325 |
}; |
| 326 |
}; |