| 1 |
// SPDX-License-Identifier: GPL-2.0-only |
| 2 |
/* |
| 3 |
* Device Tree Source for IGEPv2 Rev. C (TI OMAP AM/DM37x) |
| 4 |
* |
| 5 |
* Copyright (C) 2012 Javier Martinez Canillas <[email protected]> |
| 6 |
* Copyright (C) 2012 Enric Balletbo i Serra <[email protected]> |
| 7 |
*/ |
| 8 |
|
| 9 |
#include "omap3-igep0020-common.dtsi" |
| 10 |
|
| 11 |
/ { |
| 12 |
model = "IGEPv2 Rev. C (TI OMAP AM/DM37x)"; |
| 13 |
compatible = "isee,omap3-igep0020", "ti,omap3630", "ti,omap3"; |
| 14 |
|
| 15 |
vmmcsdio_fixed: fixedregulator-mmcsdio { |
| 16 |
compatible = "regulator-fixed"; |
| 17 |
regulator-name = "vmmcsdio_fixed"; |
| 18 |
regulator-min-microvolt = <3300000>; |
| 19 |
regulator-max-microvolt = <3300000>; |
| 20 |
}; |
| 21 |
|
| 22 |
mmc2_pwrseq: mmc2_pwrseq { |
| 23 |
compatible = "mmc-pwrseq-simple"; |
| 24 |
reset-gpios = <&gpio5 11 GPIO_ACTIVE_LOW>, /* gpio_139 - RESET_N_W */ |
| 25 |
<&gpio5 10 GPIO_ACTIVE_LOW>; /* gpio_138 - WIFI_PDN */ |
| 26 |
}; |
| 27 |
}; |
| 28 |
|
| 29 |
&omap3_pmx_core { |
| 30 |
lbee1usjyc_pins: lbee1usjyc-pins { |
| 31 |
pinctrl-single,pins = < |
| 32 |
OMAP3_CORE1_IOPAD(0x2166, PIN_OUTPUT | MUX_MODE4) /* sdmmc2_dat5.gpio_137 - RESET_N_W */ |
| 33 |
OMAP3_CORE1_IOPAD(0x2168, PIN_OUTPUT | MUX_MODE4) /* sdmmc2_dat6.gpio_138 - WIFI_PDN */ |
| 34 |
OMAP3_CORE1_IOPAD(0x216a, PIN_OUTPUT | MUX_MODE4) /* sdmmc2_dat7.gpio_139 - RST_N_B */ |
| 35 |
>; |
| 36 |
}; |
| 37 |
}; |
| 38 |
|
| 39 |
/* On board Wifi module */ |
| 40 |
&mmc2 { |
| 41 |
pinctrl-names = "default"; |
| 42 |
pinctrl-0 = <&mmc2_pins &lbee1usjyc_pins>; |
| 43 |
vmmc-supply = <&vmmcsdio_fixed>; |
| 44 |
mmc-pwrseq = <&mmc2_pwrseq>; |
| 45 |
bus-width = <4>; |
| 46 |
non-removable; |
| 47 |
}; |