| 1 |
// SPDX-License-Identifier: GPL-2.0 |
| 2 |
/* |
| 3 |
* Device Tree file for HP t5325 Thin Client" |
| 4 |
* |
| 5 |
* Copyright (C) 2014 |
| 6 |
* |
| 7 |
* Thomas Petazzoni <[email protected]> |
| 8 |
* Andrew Lunn <[email protected]> |
| 9 |
* |
| 10 |
*/ |
| 11 |
|
| 12 |
/dts-v1/; |
| 13 |
|
| 14 |
#include "kirkwood.dtsi" |
| 15 |
#include "kirkwood-6281.dtsi" |
| 16 |
|
| 17 |
/ { |
| 18 |
model = "HP t5325 Thin Client"; |
| 19 |
compatible = "hp,t5325", "marvell,kirkwood-88f6281", "marvell,kirkwood"; |
| 20 |
|
| 21 |
memory { |
| 22 |
device_type = "memory"; |
| 23 |
reg = <0x00000000 0x20000000>; |
| 24 |
}; |
| 25 |
|
| 26 |
chosen { |
| 27 |
bootargs = "console=ttyS0,115200n8"; |
| 28 |
stdout-path = &uart0; |
| 29 |
}; |
| 30 |
|
| 31 |
ocp@f1000000 { |
| 32 |
pinctrl: pin-controller@10000 { |
| 33 |
pinctrl-0 = <&pmx_i2s &pmx_sysrst>; |
| 34 |
pinctrl-names = "default"; |
| 35 |
|
| 36 |
pmx_button_power: pmx-button_power { |
| 37 |
marvell,pins = "mpp45"; |
| 38 |
marvell,function = "gpio"; |
| 39 |
}; |
| 40 |
|
| 41 |
pmx_power_off: pmx-power-off { |
| 42 |
marvell,pins = "mpp48"; |
| 43 |
marvell,function = "gpio"; |
| 44 |
}; |
| 45 |
|
| 46 |
pmx_led: pmx-led { |
| 47 |
marvell,pins = "mpp21"; |
| 48 |
marvell,function = "gpio"; |
| 49 |
}; |
| 50 |
|
| 51 |
pmx_usb_sata_power_enable: pmx-usb-sata-power-enable { |
| 52 |
marvell,pins = "mpp44"; |
| 53 |
marvell,function = "gpio"; |
| 54 |
}; |
| 55 |
|
| 56 |
pmx_spi: pmx-spi { |
| 57 |
marvell,pins = "mpp1", "mpp2", "mpp3", "mpp7"; |
| 58 |
marvell,function = "spi"; |
| 59 |
}; |
| 60 |
|
| 61 |
pmx_sysrst: pmx-sysrst { |
| 62 |
marvell,pins = "mpp6"; |
| 63 |
marvell,function = "sysrst"; |
| 64 |
}; |
| 65 |
|
| 66 |
pmx_i2s: pmx-i2s { |
| 67 |
marvell,pins = "mpp39", "mpp40", "mpp41", "mpp42", |
| 68 |
"mpp43"; |
| 69 |
marvell,function = "audio"; |
| 70 |
}; |
| 71 |
}; |
| 72 |
|
| 73 |
spi@10600 { |
| 74 |
status = "okay"; |
| 75 |
|
| 76 |
flash@0 { |
| 77 |
#address-cells = <1>; |
| 78 |
#size-cells = <1>; |
| 79 |
compatible = "st,m25p80", "jedec,spi-nor"; |
| 80 |
spi-max-frequency = <86000000>; |
| 81 |
reg = <0>; |
| 82 |
mode = <0>; |
| 83 |
|
| 84 |
partition@0 { |
| 85 |
reg = <0x0 0x80000>; |
| 86 |
label = "u-boot"; |
| 87 |
}; |
| 88 |
|
| 89 |
partition@1 { |
| 90 |
reg = <0x80000 0x40000>; |
| 91 |
label = "SSD firmware"; |
| 92 |
}; |
| 93 |
|
| 94 |
partition@2 { |
| 95 |
reg = <0xc0000 0x10000>; |
| 96 |
label = "u-boot env"; |
| 97 |
}; |
| 98 |
|
| 99 |
partition@3 { |
| 100 |
reg = <0xd0000 0x10000>; |
| 101 |
label = "permanent u-boot env"; |
| 102 |
}; |
| 103 |
|
| 104 |
partition@4 { |
| 105 |
reg = <0xd0000 0x10000>; |
| 106 |
label = "permanent u-boot env"; |
| 107 |
}; |
| 108 |
}; |
| 109 |
}; |
| 110 |
|
| 111 |
i2c@11000 { |
| 112 |
status = "okay"; |
| 113 |
|
| 114 |
alc5621: alc5621@1a { |
| 115 |
compatible = "realtek,alc5621"; |
| 116 |
reg = <0x1a>; |
| 117 |
#sound-dai-cells = <0>; |
| 118 |
add-ctrl = <0x3700>; |
| 119 |
jack-det-ctrl = <0x4810>; |
| 120 |
}; |
| 121 |
}; |
| 122 |
|
| 123 |
serial@12000 { |
| 124 |
status = "okay"; |
| 125 |
}; |
| 126 |
|
| 127 |
sata@80000 { |
| 128 |
status = "okay"; |
| 129 |
nr-ports = <2>; |
| 130 |
}; |
| 131 |
|
| 132 |
audio: audio-controller@a0000 { |
| 133 |
status = "okay"; |
| 134 |
}; |
| 135 |
}; |
| 136 |
|
| 137 |
regulators { |
| 138 |
compatible = "simple-bus"; |
| 139 |
#address-cells = <1>; |
| 140 |
#size-cells = <0>; |
| 141 |
pinctrl-0 = <&pmx_usb_sata_power_enable>; |
| 142 |
pinctrl-names = "default"; |
| 143 |
|
| 144 |
usb_power: regulator@1 { |
| 145 |
compatible = "regulator-fixed"; |
| 146 |
reg = <1>; |
| 147 |
regulator-name = "USB-SATA Power"; |
| 148 |
regulator-min-microvolt = <5000000>; |
| 149 |
regulator-max-microvolt = <5000000>; |
| 150 |
enable-active-high; |
| 151 |
regulator-always-on; |
| 152 |
regulator-boot-on; |
| 153 |
gpio = <&gpio1 12 GPIO_ACTIVE_HIGH>; |
| 154 |
}; |
| 155 |
}; |
| 156 |
|
| 157 |
gpio_keys { |
| 158 |
compatible = "gpio-keys"; |
| 159 |
pinctrl-0 = <&pmx_button_power>; |
| 160 |
pinctrl-names = "default"; |
| 161 |
|
| 162 |
button-power { |
| 163 |
label = "Power Button"; |
| 164 |
linux,code = <KEY_POWER>; |
| 165 |
gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>; |
| 166 |
}; |
| 167 |
}; |
| 168 |
|
| 169 |
gpio_poweroff { |
| 170 |
compatible = "gpio-poweroff"; |
| 171 |
pinctrl-0 = <&pmx_power_off>; |
| 172 |
pinctrl-names = "default"; |
| 173 |
gpios = <&gpio1 17 GPIO_ACTIVE_HIGH>; |
| 174 |
}; |
| 175 |
|
| 176 |
sound { |
| 177 |
compatible = "simple-audio-card"; |
| 178 |
simple-audio-card,format = "i2s"; |
| 179 |
simple-audio-card,routing = |
| 180 |
"Headphone Jack", "HPL", |
| 181 |
"Headphone Jack", "HPR", |
| 182 |
"Speaker", "SPKOUT", |
| 183 |
"Speaker", "SPKOUTN", |
| 184 |
"MIC1", "Mic Jack", |
| 185 |
"MIC2", "Mic Jack"; |
| 186 |
simple-audio-card,widgets = |
| 187 |
"Headphone", "Headphone Jack", |
| 188 |
"Speaker", "Speaker", |
| 189 |
"Microphone", "Mic Jack"; |
| 190 |
|
| 191 |
simple-audio-card,mclk-fs = <256>; |
| 192 |
|
| 193 |
simple-audio-card,cpu { |
| 194 |
sound-dai = <&audio>; |
| 195 |
}; |
| 196 |
|
| 197 |
simple-audio-card,codec { |
| 198 |
sound-dai = <&alc5621>; |
| 199 |
}; |
| 200 |
}; |
| 201 |
}; |
| 202 |
|
| 203 |
&mdio { |
| 204 |
status = "okay"; |
| 205 |
|
| 206 |
ethphy0: ethernet-phy@8 { |
| 207 |
device_type = "ethernet-phy"; |
| 208 |
reg = <8>; |
| 209 |
}; |
| 210 |
}; |
| 211 |
|
| 212 |
ð0 { |
| 213 |
status = "okay"; |
| 214 |
ethernet0-port@0 { |
| 215 |
phy-handle = <ðphy0>; |
| 216 |
}; |
| 217 |
}; |
| 218 |
|
| 219 |
&pciec { |
| 220 |
status = "okay"; |
| 221 |
}; |
| 222 |
|
| 223 |
&pcie0 { |
| 224 |
status = "okay"; |
| 225 |
}; |