| 1 |
// SPDX-License-Identifier: (GPL-2.0+ OR MIT) |
| 2 |
/* |
| 3 |
* Device Tree file for NETGEAR ReadyNAS 2120 |
| 4 |
* |
| 5 |
* Copyright (C) 2013, Arnaud EBALARD <[email protected]> |
| 6 |
*/ |
| 7 |
|
| 8 |
/dts-v1/; |
| 9 |
|
| 10 |
#include <dt-bindings/input/input.h> |
| 11 |
#include <dt-bindings/gpio/gpio.h> |
| 12 |
#include "armada-xp-mv78230.dtsi" |
| 13 |
|
| 14 |
/ { |
| 15 |
model = "NETGEAR ReadyNAS 2120"; |
| 16 |
compatible = "netgear,readynas-2120", "marvell,armadaxp-mv78230", "marvell,armadaxp", "marvell,armada-370-xp"; |
| 17 |
|
| 18 |
chosen { |
| 19 |
stdout-path = "serial0:115200n8"; |
| 20 |
}; |
| 21 |
|
| 22 |
memory@0 { |
| 23 |
device_type = "memory"; |
| 24 |
reg = <0 0x00000000 0 0x80000000>; /* 2GB */ |
| 25 |
}; |
| 26 |
|
| 27 |
soc { |
| 28 |
ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xd0000000 0x100000 |
| 29 |
MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000 |
| 30 |
MBUS_ID(0x09, 0x09) 0 0 0xf1100000 0x10000 |
| 31 |
MBUS_ID(0x09, 0x05) 0 0 0xf1110000 0x10000>; |
| 32 |
|
| 33 |
internal-regs { |
| 34 |
|
| 35 |
/* RTC is provided by Intersil ISL12057 I2C RTC chip */ |
| 36 |
rtc@10300 { |
| 37 |
status = "disabled"; |
| 38 |
}; |
| 39 |
|
| 40 |
i2c@11000 { |
| 41 |
clock-frequency = <400000>; |
| 42 |
status = "okay"; |
| 43 |
|
| 44 |
/* Controller for rear fan #1 of 3 (Protechnic |
| 45 |
* MGT4012XB-O20, 8000RPM) near eSATA port */ |
| 46 |
g762_fan1: g762@3e { |
| 47 |
compatible = "gmt,g762"; |
| 48 |
reg = <0x3e>; |
| 49 |
clocks = <&g762_clk>; /* input clock */ |
| 50 |
fan_gear_mode = <0>; |
| 51 |
fan_startv = <1>; |
| 52 |
pwm_polarity = <0>; |
| 53 |
}; |
| 54 |
|
| 55 |
/* Controller for rear (center) fan #2 of 3 */ |
| 56 |
g762_fan2: g762@48 { |
| 57 |
compatible = "gmt,g762"; |
| 58 |
reg = <0x48>; |
| 59 |
clocks = <&g762_clk>; /* input clock */ |
| 60 |
fan_gear_mode = <0>; |
| 61 |
fan_startv = <1>; |
| 62 |
pwm_polarity = <0>; |
| 63 |
}; |
| 64 |
|
| 65 |
/* Controller for rear fan #3 of 3 */ |
| 66 |
g762_fan3: g762@49 { |
| 67 |
compatible = "gmt,g762"; |
| 68 |
reg = <0x49>; |
| 69 |
clocks = <&g762_clk>; /* input clock */ |
| 70 |
fan_gear_mode = <0>; |
| 71 |
fan_startv = <1>; |
| 72 |
pwm_polarity = <0>; |
| 73 |
}; |
| 74 |
|
| 75 |
/* Temperature sensor */ |
| 76 |
g751: g751@4c { |
| 77 |
compatible = "gmt,g751"; |
| 78 |
reg = <0x4c>; |
| 79 |
}; |
| 80 |
|
| 81 |
isl12057: rtc@68 { |
| 82 |
compatible = "isil,isl12057"; |
| 83 |
reg = <0x68>; |
| 84 |
wakeup-source; |
| 85 |
}; |
| 86 |
}; |
| 87 |
|
| 88 |
serial@12000 { |
| 89 |
status = "okay"; |
| 90 |
}; |
| 91 |
|
| 92 |
/* Front USB 2.0 port */ |
| 93 |
usb@50000 { |
| 94 |
status = "okay"; |
| 95 |
}; |
| 96 |
|
| 97 |
ethernet@70000 { |
| 98 |
pinctrl-0 = <&ge0_rgmii_pins>; |
| 99 |
pinctrl-names = "default"; |
| 100 |
|
| 101 |
status = "okay"; |
| 102 |
phy = <&phy0>; |
| 103 |
phy-mode = "rgmii-id"; |
| 104 |
}; |
| 105 |
|
| 106 |
ethernet@74000 { |
| 107 |
pinctrl-0 = <&ge1_rgmii_pins>; |
| 108 |
pinctrl-names = "default"; |
| 109 |
|
| 110 |
status = "okay"; |
| 111 |
phy = <&phy1>; |
| 112 |
phy-mode = "rgmii-id"; |
| 113 |
}; |
| 114 |
|
| 115 |
/* Two rear eSATA ports */ |
| 116 |
sata@a0000 { |
| 117 |
nr-ports = <2>; |
| 118 |
status = "okay"; |
| 119 |
}; |
| 120 |
}; |
| 121 |
}; |
| 122 |
|
| 123 |
clocks { |
| 124 |
g762_clk: g762-oscillator { |
| 125 |
compatible = "fixed-clock"; |
| 126 |
#clock-cells = <0>; |
| 127 |
clock-frequency = <32768>; |
| 128 |
}; |
| 129 |
}; |
| 130 |
|
| 131 |
gpio-leds { |
| 132 |
compatible = "gpio-leds"; |
| 133 |
pinctrl-0 = <&sata1_led_pin &sata2_led_pin &err_led_pin |
| 134 |
&sata3_led_pin &sata4_led_pin>; |
| 135 |
pinctrl-names = "default"; |
| 136 |
|
| 137 |
red-sata1-led { |
| 138 |
label = "rn2120:red:sata1"; |
| 139 |
gpios = <&gpio0 31 GPIO_ACTIVE_HIGH>; |
| 140 |
default-state = "off"; |
| 141 |
}; |
| 142 |
|
| 143 |
red-sata2-led { |
| 144 |
label = "rn2120:red:sata2"; |
| 145 |
gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>; |
| 146 |
default-state = "off"; |
| 147 |
}; |
| 148 |
|
| 149 |
red-sata3-led { |
| 150 |
label = "rn2120:red:sata3"; |
| 151 |
gpios = <&gpio1 12 GPIO_ACTIVE_HIGH>; |
| 152 |
default-state = "off"; |
| 153 |
}; |
| 154 |
|
| 155 |
red-sata4-led { |
| 156 |
label = "rn2120:red:sata4"; |
| 157 |
gpios = <&gpio1 15 GPIO_ACTIVE_HIGH>; |
| 158 |
default-state = "off"; |
| 159 |
}; |
| 160 |
|
| 161 |
red-err-led { |
| 162 |
label = "rn2120:red:err"; |
| 163 |
gpios = <&gpio1 13 GPIO_ACTIVE_LOW>; |
| 164 |
default-state = "off"; |
| 165 |
}; |
| 166 |
}; |
| 167 |
|
| 168 |
gpio-keys { |
| 169 |
compatible = "gpio-keys"; |
| 170 |
pinctrl-0 = <&power_button_pin &reset_button_pin>; |
| 171 |
pinctrl-names = "default"; |
| 172 |
|
| 173 |
power-button { |
| 174 |
label = "Power Button"; |
| 175 |
linux,code = <KEY_POWER>; |
| 176 |
gpios = <&gpio0 27 GPIO_ACTIVE_HIGH>; |
| 177 |
}; |
| 178 |
|
| 179 |
reset-button { |
| 180 |
label = "Reset Button"; |
| 181 |
linux,code = <KEY_RESTART>; |
| 182 |
gpios = <&gpio1 9 GPIO_ACTIVE_LOW>; |
| 183 |
}; |
| 184 |
}; |
| 185 |
|
| 186 |
gpio-poweroff { |
| 187 |
compatible = "gpio-poweroff"; |
| 188 |
pinctrl-0 = <&poweroff>; |
| 189 |
pinctrl-names = "default"; |
| 190 |
gpios = <&gpio1 10 GPIO_ACTIVE_LOW>; |
| 191 |
}; |
| 192 |
}; |
| 193 |
|
| 194 |
&pciec { |
| 195 |
status = "okay"; |
| 196 |
|
| 197 |
/* Connected to first Marvell 88SE9170 SATA controller */ |
| 198 |
pcie@1,0 { |
| 199 |
/* Port 0, Lane 0 */ |
| 200 |
status = "okay"; |
| 201 |
}; |
| 202 |
|
| 203 |
/* Connected to second Marvell 88SE9170 SATA controller */ |
| 204 |
pcie@2,0 { |
| 205 |
/* Port 0, Lane 1 */ |
| 206 |
status = "okay"; |
| 207 |
}; |
| 208 |
|
| 209 |
/* Connected to Fresco Logic FL1009 USB 3.0 controller */ |
| 210 |
pcie@5,0 { |
| 211 |
/* Port 1, Lane 0 */ |
| 212 |
status = "okay"; |
| 213 |
}; |
| 214 |
}; |
| 215 |
|
| 216 |
&mdio { |
| 217 |
phy0: ethernet-phy@0 { /* Marvell 88E1318 */ |
| 218 |
reg = <0>; |
| 219 |
}; |
| 220 |
|
| 221 |
phy1: ethernet-phy@1 { /* Marvell 88E1318 */ |
| 222 |
reg = <1>; |
| 223 |
}; |
| 224 |
}; |
| 225 |
|
| 226 |
|
| 227 |
&pinctrl { |
| 228 |
poweroff: poweroff { |
| 229 |
marvell,pins = "mpp42"; |
| 230 |
marvell,function = "gpio"; |
| 231 |
}; |
| 232 |
|
| 233 |
power_button_pin: power-button-pin { |
| 234 |
marvell,pins = "mpp27"; |
| 235 |
marvell,function = "gpio"; |
| 236 |
}; |
| 237 |
|
| 238 |
reset_button_pin: reset-button-pin { |
| 239 |
marvell,pins = "mpp41"; |
| 240 |
marvell,function = "gpio"; |
| 241 |
}; |
| 242 |
|
| 243 |
sata1_led_pin: sata1-led-pin { |
| 244 |
marvell,pins = "mpp31"; |
| 245 |
marvell,function = "gpio"; |
| 246 |
}; |
| 247 |
|
| 248 |
sata2_led_pin: sata2-led-pin { |
| 249 |
marvell,pins = "mpp40"; |
| 250 |
marvell,function = "gpio"; |
| 251 |
}; |
| 252 |
|
| 253 |
sata3_led_pin: sata3-led-pin { |
| 254 |
marvell,pins = "mpp44"; |
| 255 |
marvell,function = "gpio"; |
| 256 |
}; |
| 257 |
|
| 258 |
sata4_led_pin: sata4-led-pin { |
| 259 |
marvell,pins = "mpp47"; |
| 260 |
marvell,function = "gpio"; |
| 261 |
}; |
| 262 |
|
| 263 |
sata1_power_pin: sata1-power-pin { |
| 264 |
marvell,pins = "mpp24"; |
| 265 |
marvell,function = "gpio"; |
| 266 |
}; |
| 267 |
|
| 268 |
sata2_power_pin: sata2-power-pin { |
| 269 |
marvell,pins = "mpp25"; |
| 270 |
marvell,function = "gpio"; |
| 271 |
}; |
| 272 |
|
| 273 |
sata3_power_pin: sata3-power-pin { |
| 274 |
marvell,pins = "mpp26"; |
| 275 |
marvell,function = "gpio"; |
| 276 |
}; |
| 277 |
|
| 278 |
sata4_power_pin: sata4-power-pin { |
| 279 |
marvell,pins = "mpp28"; |
| 280 |
marvell,function = "gpio"; |
| 281 |
}; |
| 282 |
|
| 283 |
sata1_pres_pin: sata1-pres-pin { |
| 284 |
marvell,pins = "mpp32"; |
| 285 |
marvell,function = "gpio"; |
| 286 |
}; |
| 287 |
|
| 288 |
sata2_pres_pin: sata2-pres-pin { |
| 289 |
marvell,pins = "mpp33"; |
| 290 |
marvell,function = "gpio"; |
| 291 |
}; |
| 292 |
|
| 293 |
sata3_pres_pin: sata3-pres-pin { |
| 294 |
marvell,pins = "mpp34"; |
| 295 |
marvell,function = "gpio"; |
| 296 |
}; |
| 297 |
|
| 298 |
sata4_pres_pin: sata4-pres-pin { |
| 299 |
marvell,pins = "mpp35"; |
| 300 |
marvell,function = "gpio"; |
| 301 |
}; |
| 302 |
|
| 303 |
err_led_pin: err-led-pin { |
| 304 |
marvell,pins = "mpp45"; |
| 305 |
marvell,function = "gpio"; |
| 306 |
}; |
| 307 |
}; |
| 308 |
|
| 309 |
&nand_controller { |
| 310 |
status = "okay"; |
| 311 |
|
| 312 |
nand@0 { |
| 313 |
reg = <0>; |
| 314 |
label = "pxa3xx_nand-0"; |
| 315 |
nand-rb = <0>; |
| 316 |
marvell,nand-keep-config; |
| 317 |
nand-on-flash-bbt; |
| 318 |
|
| 319 |
/* Use Hardware BCH ECC */ |
| 320 |
nand-ecc-strength = <4>; |
| 321 |
nand-ecc-step-size = <512>; |
| 322 |
|
| 323 |
partitions { |
| 324 |
compatible = "fixed-partitions"; |
| 325 |
#address-cells = <1>; |
| 326 |
#size-cells = <1>; |
| 327 |
|
| 328 |
partition@0 { |
| 329 |
label = "u-boot"; |
| 330 |
reg = <0x0000000 0x180000>; /* 1.5MB */ |
| 331 |
read-only; |
| 332 |
}; |
| 333 |
|
| 334 |
partition@180000 { |
| 335 |
label = "u-boot-env"; |
| 336 |
reg = <0x180000 0x20000>; /* 128KB */ |
| 337 |
read-only; |
| 338 |
}; |
| 339 |
|
| 340 |
partition@200000 { |
| 341 |
label = "uImage"; |
| 342 |
reg = <0x0200000 0x600000>; /* 6MB */ |
| 343 |
}; |
| 344 |
|
| 345 |
partition@800000 { |
| 346 |
label = "minirootfs"; |
| 347 |
reg = <0x0800000 0x400000>; /* 4MB */ |
| 348 |
}; |
| 349 |
|
| 350 |
/* Last MB is for the BBT, i.e. not writable */ |
| 351 |
partition@c00000 { |
| 352 |
label = "ubifs"; |
| 353 |
reg = <0x0c00000 0x7400000>; /* 116MB */ |
| 354 |
}; |
| 355 |
}; |
| 356 |
}; |
| 357 |
}; |