| 1 |
// SPDX-License-Identifier: (GPL-2.0+ OR MIT) |
| 2 |
/* |
| 3 |
* Device Tree Include file for Marvell Armada 39x family of SoCs. |
| 4 |
* |
| 5 |
* Copyright (C) 2015 Marvell |
| 6 |
* |
| 7 |
* Thomas Petazzoni <[email protected]> |
| 8 |
*/ |
| 9 |
|
| 10 |
#include <dt-bindings/interrupt-controller/arm-gic.h> |
| 11 |
#include <dt-bindings/interrupt-controller/irq.h> |
| 12 |
|
| 13 |
#define MBUS_ID(target,attributes) (((target) << 24) | ((attributes) << 16)) |
| 14 |
|
| 15 |
/ { |
| 16 |
#address-cells = <1>; |
| 17 |
#size-cells = <1>; |
| 18 |
model = "Marvell Armada 39x family SoC"; |
| 19 |
compatible = "marvell,armada390"; |
| 20 |
|
| 21 |
aliases { |
| 22 |
gpio0 = &gpio0; |
| 23 |
gpio1 = &gpio1; |
| 24 |
serial0 = &uart0; |
| 25 |
serial1 = &uart1; |
| 26 |
serial2 = &uart2; |
| 27 |
serial3 = &uart3; |
| 28 |
}; |
| 29 |
|
| 30 |
cpus { |
| 31 |
#address-cells = <1>; |
| 32 |
#size-cells = <0>; |
| 33 |
enable-method = "marvell,armada-390-smp"; |
| 34 |
|
| 35 |
cpu@0 { |
| 36 |
device_type = "cpu"; |
| 37 |
compatible = "arm,cortex-a9"; |
| 38 |
reg = <0>; |
| 39 |
}; |
| 40 |
cpu@1 { |
| 41 |
device_type = "cpu"; |
| 42 |
compatible = "arm,cortex-a9"; |
| 43 |
reg = <1>; |
| 44 |
}; |
| 45 |
}; |
| 46 |
|
| 47 |
pmu { |
| 48 |
compatible = "arm,cortex-a9-pmu"; |
| 49 |
interrupts-extended = <&mpic 3>; |
| 50 |
}; |
| 51 |
|
| 52 |
soc { |
| 53 |
compatible = "marvell,armada390-mbus", "marvell,armadaxp-mbus", |
| 54 |
"simple-bus"; |
| 55 |
#address-cells = <2>; |
| 56 |
#size-cells = <1>; |
| 57 |
controller = <&mbusc>; |
| 58 |
interrupt-parent = <&gic>; |
| 59 |
pcie-mem-aperture = <0xe0000000 0x8000000>; |
| 60 |
pcie-io-aperture = <0xe8000000 0x100000>; |
| 61 |
|
| 62 |
bootrom { |
| 63 |
compatible = "marvell,bootrom"; |
| 64 |
reg = <MBUS_ID(0x01, 0x1d) 0 0x200000>; |
| 65 |
}; |
| 66 |
|
| 67 |
internal-regs { |
| 68 |
compatible = "simple-bus"; |
| 69 |
#address-cells = <1>; |
| 70 |
#size-cells = <1>; |
| 71 |
ranges = <0 MBUS_ID(0xf0, 0x01) 0 0x100000>; |
| 72 |
|
| 73 |
L2: cache-controller@8000 { |
| 74 |
compatible = "arm,pl310-cache"; |
| 75 |
reg = <0x8000 0x1000>; |
| 76 |
cache-unified; |
| 77 |
cache-level = <2>; |
| 78 |
arm,double-linefill-incr = <0>; |
| 79 |
arm,double-linefill-wrap = <0>; |
| 80 |
arm,double-linefill = <0>; |
| 81 |
prefetch-data = <1>; |
| 82 |
}; |
| 83 |
|
| 84 |
scu@c000 { |
| 85 |
compatible = "arm,cortex-a9-scu"; |
| 86 |
reg = <0xc000 0x100>; |
| 87 |
}; |
| 88 |
|
| 89 |
timer@c600 { |
| 90 |
compatible = "arm,cortex-a9-twd-timer"; |
| 91 |
reg = <0xc600 0x20>; |
| 92 |
interrupts = <GIC_PPI 13 (IRQ_TYPE_EDGE_RISING | GIC_CPU_MASK_SIMPLE(2))>; |
| 93 |
clocks = <&coreclk 2>; |
| 94 |
}; |
| 95 |
|
| 96 |
gic: interrupt-controller@d000 { |
| 97 |
compatible = "arm,cortex-a9-gic"; |
| 98 |
#interrupt-cells = <3>; |
| 99 |
#size-cells = <0>; |
| 100 |
interrupt-controller; |
| 101 |
reg = <0xd000 0x1000>, |
| 102 |
<0xc100 0x100>; |
| 103 |
}; |
| 104 |
|
| 105 |
i2c0: i2c@11000 { |
| 106 |
compatible = "marvell,mv64xxx-i2c"; |
| 107 |
reg = <0x11000 0x20>; |
| 108 |
#address-cells = <1>; |
| 109 |
#size-cells = <0>; |
| 110 |
interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>; |
| 111 |
clocks = <&coreclk 0>; |
| 112 |
status = "disabled"; |
| 113 |
}; |
| 114 |
|
| 115 |
i2c1: i2c@11100 { |
| 116 |
compatible = "marvell,mv64xxx-i2c"; |
| 117 |
reg = <0x11100 0x20>; |
| 118 |
#address-cells = <1>; |
| 119 |
#size-cells = <0>; |
| 120 |
interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>; |
| 121 |
clocks = <&coreclk 0>; |
| 122 |
status = "disabled"; |
| 123 |
}; |
| 124 |
|
| 125 |
i2c2: i2c@11200 { |
| 126 |
compatible = "marvell,mv64xxx-i2c"; |
| 127 |
reg = <0x11200 0x20>; |
| 128 |
#address-cells = <1>; |
| 129 |
#size-cells = <0>; |
| 130 |
interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>; |
| 131 |
clocks = <&coreclk 0>; |
| 132 |
status = "disabled"; |
| 133 |
}; |
| 134 |
|
| 135 |
i2c3: i2c@11300 { |
| 136 |
compatible = "marvell,mv64xxx-i2c"; |
| 137 |
reg = <0x11300 0x20>; |
| 138 |
#address-cells = <1>; |
| 139 |
#size-cells = <0>; |
| 140 |
interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>; |
| 141 |
clocks = <&coreclk 0>; |
| 142 |
status = "disabled"; |
| 143 |
}; |
| 144 |
|
| 145 |
uart0: serial@12000 { |
| 146 |
compatible = "snps,dw-apb-uart"; |
| 147 |
reg = <0x12000 0x100>; |
| 148 |
reg-shift = <2>; |
| 149 |
interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; |
| 150 |
reg-io-width = <1>; |
| 151 |
clocks = <&coreclk 0>; |
| 152 |
status = "disabled"; |
| 153 |
}; |
| 154 |
|
| 155 |
uart1: serial@12100 { |
| 156 |
compatible = "snps,dw-apb-uart"; |
| 157 |
reg = <0x12100 0x100>; |
| 158 |
reg-shift = <2>; |
| 159 |
interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; |
| 160 |
reg-io-width = <1>; |
| 161 |
clocks = <&coreclk 0>; |
| 162 |
status = "disabled"; |
| 163 |
}; |
| 164 |
|
| 165 |
uart2: serial@12200 { |
| 166 |
compatible = "snps,dw-apb-uart"; |
| 167 |
reg = <0x12200 0x100>; |
| 168 |
reg-shift = <2>; |
| 169 |
interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; |
| 170 |
reg-io-width = <1>; |
| 171 |
clocks = <&coreclk 0>; |
| 172 |
status = "disabled"; |
| 173 |
}; |
| 174 |
|
| 175 |
uart3: serial@12300 { |
| 176 |
compatible = "snps,dw-apb-uart"; |
| 177 |
reg = <0x12300 0x100>; |
| 178 |
reg-shift = <2>; |
| 179 |
interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>; |
| 180 |
reg-io-width = <1>; |
| 181 |
clocks = <&coreclk 0>; |
| 182 |
status = "disabled"; |
| 183 |
}; |
| 184 |
|
| 185 |
pinctrl@18000 { |
| 186 |
i2c0_pins: i2c0-pins { |
| 187 |
marvell,pins = "mpp2", "mpp3"; |
| 188 |
marvell,function = "i2c0"; |
| 189 |
}; |
| 190 |
|
| 191 |
uart0_pins: uart0-pins { |
| 192 |
marvell,pins = "mpp0", "mpp1"; |
| 193 |
marvell,function = "ua0"; |
| 194 |
}; |
| 195 |
|
| 196 |
uart1_pins: uart1-pins { |
| 197 |
marvell,pins = "mpp19", "mpp20"; |
| 198 |
marvell,function = "ua1"; |
| 199 |
}; |
| 200 |
|
| 201 |
spi1_pins: spi1-pins { |
| 202 |
marvell,pins = "mpp56", "mpp57", "mpp58", "mpp59"; |
| 203 |
marvell,function = "spi1"; |
| 204 |
}; |
| 205 |
|
| 206 |
nand_pins: nand-pins { |
| 207 |
marvell,pins = "mpp22", "mpp34", "mpp23", "mpp33", |
| 208 |
"mpp38", "mpp28", "mpp40", "mpp42", |
| 209 |
"mpp35", "mpp36", "mpp25", "mpp30", |
| 210 |
"mpp32"; |
| 211 |
marvell,function = "dev"; |
| 212 |
}; |
| 213 |
}; |
| 214 |
|
| 215 |
gpio0: gpio@18100 { |
| 216 |
compatible = "marvell,orion-gpio"; |
| 217 |
reg = <0x18100 0x40>; |
| 218 |
ngpios = <32>; |
| 219 |
gpio-controller; |
| 220 |
#gpio-cells = <2>; |
| 221 |
interrupt-controller; |
| 222 |
#interrupt-cells = <2>; |
| 223 |
interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>, |
| 224 |
<GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>, |
| 225 |
<GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>, |
| 226 |
<GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>; |
| 227 |
}; |
| 228 |
|
| 229 |
gpio1: gpio@18140 { |
| 230 |
compatible = "marvell,orion-gpio"; |
| 231 |
reg = <0x18140 0x40>; |
| 232 |
ngpios = <28>; |
| 233 |
gpio-controller; |
| 234 |
#gpio-cells = <2>; |
| 235 |
interrupt-controller; |
| 236 |
#interrupt-cells = <2>; |
| 237 |
interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>, |
| 238 |
<GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>, |
| 239 |
<GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>, |
| 240 |
<GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>; |
| 241 |
}; |
| 242 |
|
| 243 |
system-controller@18200 { |
| 244 |
compatible = "marvell,armada-390-system-controller", |
| 245 |
"marvell,armada-370-xp-system-controller"; |
| 246 |
reg = <0x18200 0x100>; |
| 247 |
}; |
| 248 |
|
| 249 |
gateclk: clock-gating-control@18220 { |
| 250 |
compatible = "marvell,armada-390-gating-clock"; |
| 251 |
reg = <0x18220 0x4>; |
| 252 |
clocks = <&coreclk 0>; |
| 253 |
#clock-cells = <1>; |
| 254 |
}; |
| 255 |
|
| 256 |
coreclk: mvebu-sar@18600 { |
| 257 |
compatible = "marvell,armada-390-core-clock"; |
| 258 |
reg = <0x18600 0x04>; |
| 259 |
#clock-cells = <1>; |
| 260 |
}; |
| 261 |
|
| 262 |
mbusc: mbus-controller@20000 { |
| 263 |
compatible = "marvell,mbus-controller"; |
| 264 |
reg = <0x20000 0x100>, <0x20180 0x20>, <0x20250 0x8>; |
| 265 |
}; |
| 266 |
|
| 267 |
mpic: interrupt-controller@20a00 { |
| 268 |
compatible = "marvell,mpic"; |
| 269 |
reg = <0x20a00 0x2d0>, <0x21070 0x58>; |
| 270 |
#interrupt-cells = <1>; |
| 271 |
interrupt-controller; |
| 272 |
msi-controller; |
| 273 |
interrupts = <GIC_PPI 15 IRQ_TYPE_LEVEL_HIGH>; |
| 274 |
}; |
| 275 |
|
| 276 |
timer@20300 { |
| 277 |
compatible = "marvell,armada-380-timer", |
| 278 |
"marvell,armada-xp-timer"; |
| 279 |
reg = <0x20300 0x30>, <0x21040 0x30>; |
| 280 |
interrupts-extended = <&gic GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, |
| 281 |
<&gic GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>, |
| 282 |
<&gic GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>, |
| 283 |
<&gic GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>, |
| 284 |
<&mpic 5>, |
| 285 |
<&mpic 6>; |
| 286 |
clocks = <&coreclk 2>, <&coreclk 5>; |
| 287 |
clock-names = "nbclk", "fixed"; |
| 288 |
}; |
| 289 |
|
| 290 |
watchdog@20300 { |
| 291 |
compatible = "marvell,armada-380-wdt"; |
| 292 |
reg = <0x20300 0x34>, <0x20704 0x4>, |
| 293 |
<0x18260 0x4>; |
| 294 |
clocks = <&coreclk 2>, <&refclk>; |
| 295 |
clock-names = "nbclk", "fixed"; |
| 296 |
}; |
| 297 |
|
| 298 |
cpurst@20800 { |
| 299 |
compatible = "marvell,armada-370-cpu-reset"; |
| 300 |
reg = <0x20800 0x10>; |
| 301 |
}; |
| 302 |
|
| 303 |
mpcore-soc-ctrl@20d20 { |
| 304 |
compatible = "marvell,armada-380-mpcore-soc-ctrl"; |
| 305 |
reg = <0x20d20 0x6c>; |
| 306 |
}; |
| 307 |
|
| 308 |
coherency-fabric@21010 { |
| 309 |
compatible = "marvell,armada-380-coherency-fabric"; |
| 310 |
reg = <0x21010 0x1c>; |
| 311 |
}; |
| 312 |
|
| 313 |
pmsu@22000 { |
| 314 |
compatible = "marvell,armada-390-pmsu", |
| 315 |
"marvell,armada-380-pmsu"; |
| 316 |
reg = <0x22000 0x1000>; |
| 317 |
}; |
| 318 |
|
| 319 |
xor@60800 { |
| 320 |
compatible = "marvell,armada-380-xor", "marvell,orion-xor"; |
| 321 |
reg = <0x60800 0x100 |
| 322 |
0x60a00 0x100>; |
| 323 |
clocks = <&gateclk 22>; |
| 324 |
status = "okay"; |
| 325 |
|
| 326 |
xor00 { |
| 327 |
interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>; |
| 328 |
dmacap,memcpy; |
| 329 |
dmacap,xor; |
| 330 |
}; |
| 331 |
xor01 { |
| 332 |
interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>; |
| 333 |
dmacap,memcpy; |
| 334 |
dmacap,xor; |
| 335 |
dmacap,memset; |
| 336 |
}; |
| 337 |
}; |
| 338 |
|
| 339 |
xor@60900 { |
| 340 |
compatible = "marvell,armada-380-xor", "marvell,orion-xor"; |
| 341 |
reg = <0x60900 0x100 |
| 342 |
0x60b00 0x100>; |
| 343 |
clocks = <&gateclk 28>; |
| 344 |
status = "okay"; |
| 345 |
|
| 346 |
xor10 { |
| 347 |
interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>; |
| 348 |
dmacap,memcpy; |
| 349 |
dmacap,xor; |
| 350 |
}; |
| 351 |
xor11 { |
| 352 |
interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>; |
| 353 |
dmacap,memcpy; |
| 354 |
dmacap,xor; |
| 355 |
dmacap,memset; |
| 356 |
}; |
| 357 |
}; |
| 358 |
|
| 359 |
rtc@a3800 { |
| 360 |
compatible = "marvell,armada-380-rtc"; |
| 361 |
reg = <0xa3800 0x20>, <0x184a0 0x0c>; |
| 362 |
reg-names = "rtc", "rtc-soc"; |
| 363 |
interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>; |
| 364 |
}; |
| 365 |
|
| 366 |
nand_controller: nand-controller@d0000 { |
| 367 |
compatible = "marvell,armada370-nand-controller"; |
| 368 |
reg = <0xd0000 0x54>; |
| 369 |
#address-cells = <1>; |
| 370 |
#size-cells = <0>; |
| 371 |
interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>; |
| 372 |
clocks = <&coredivclk 0>; |
| 373 |
status = "disabled"; |
| 374 |
}; |
| 375 |
|
| 376 |
sdhci@d8000 { |
| 377 |
compatible = "marvell,armada-380-sdhci"; |
| 378 |
reg-names = "sdhci", "mbus", "conf-sdio3"; |
| 379 |
reg = <0xd8000 0x1000>, |
| 380 |
<0xdc000 0x100>, |
| 381 |
<0x18454 0x4>; |
| 382 |
interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>; |
| 383 |
clocks = <&gateclk 17>; |
| 384 |
mrvl,clk-delay-cycles = <0x1F>; |
| 385 |
status = "disabled"; |
| 386 |
}; |
| 387 |
|
| 388 |
coredivclk: clock@e4250 { |
| 389 |
compatible = "marvell,armada-390-corediv-clock", |
| 390 |
"marvell,armada-380-corediv-clock"; |
| 391 |
reg = <0xe4250 0xc>; |
| 392 |
#clock-cells = <1>; |
| 393 |
clocks = <&mainpll>; |
| 394 |
clock-output-names = "nand"; |
| 395 |
}; |
| 396 |
|
| 397 |
thermal@e8078 { |
| 398 |
compatible = "marvell,armada380-thermal"; |
| 399 |
reg = <0xe4078 0x4>, <0xe4074 0x4>; |
| 400 |
status = "okay"; |
| 401 |
}; |
| 402 |
}; |
| 403 |
|
| 404 |
pcie { |
| 405 |
compatible = "marvell,armada-370-pcie"; |
| 406 |
status = "disabled"; |
| 407 |
device_type = "pci"; |
| 408 |
|
| 409 |
#address-cells = <3>; |
| 410 |
#size-cells = <2>; |
| 411 |
|
| 412 |
msi-parent = <&mpic>; |
| 413 |
bus-range = <0x00 0xff>; |
| 414 |
|
| 415 |
ranges = |
| 416 |
<0x82000000 0 0x80000 MBUS_ID(0xf0, 0x01) 0x80000 0 0x00002000 |
| 417 |
0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000 |
| 418 |
0x82000000 0 0x44000 MBUS_ID(0xf0, 0x01) 0x44000 0 0x00002000 |
| 419 |
0x82000000 0 0x48000 MBUS_ID(0xf0, 0x01) 0x48000 0 0x00002000 |
| 420 |
0x82000000 0x1 0 MBUS_ID(0x08, 0xe8) 0 1 0 /* Port 0 MEM */ |
| 421 |
0x81000000 0x1 0 MBUS_ID(0x08, 0xe0) 0 1 0 /* Port 0 IO */ |
| 422 |
0x82000000 0x2 0 MBUS_ID(0x04, 0xe8) 0 1 0 /* Port 1 MEM */ |
| 423 |
0x81000000 0x2 0 MBUS_ID(0x04, 0xe0) 0 1 0 /* Port 1 IO */ |
| 424 |
0x82000000 0x3 0 MBUS_ID(0x04, 0xd8) 0 1 0 /* Port 2 MEM */ |
| 425 |
0x81000000 0x3 0 MBUS_ID(0x04, 0xd0) 0 1 0 /* Port 2 IO */ |
| 426 |
0x82000000 0x4 0 MBUS_ID(0x04, 0xb8) 0 1 0 /* Port 3 MEM */ |
| 427 |
0x81000000 0x4 0 MBUS_ID(0x04, 0xb0) 0 1 0 /* Port 3 IO */>; |
| 428 |
|
| 429 |
/* |
| 430 |
* This port can be either x4 or x1. When |
| 431 |
* configured in x4 by the bootloader, then |
| 432 |
* pcie@4,0 is not available. |
| 433 |
*/ |
| 434 |
pcie@1,0 { |
| 435 |
device_type = "pci"; |
| 436 |
assigned-addresses = <0x82000800 0 0x80000 0 0x2000>; |
| 437 |
reg = <0x0800 0 0 0 0>; |
| 438 |
#address-cells = <3>; |
| 439 |
#size-cells = <2>; |
| 440 |
interrupt-names = "intx"; |
| 441 |
interrupts-extended = <&gic GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>; |
| 442 |
#interrupt-cells = <1>; |
| 443 |
ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0 |
| 444 |
0x81000000 0 0 0x81000000 0x1 0 1 0>; |
| 445 |
bus-range = <0x00 0xff>; |
| 446 |
interrupt-map-mask = <0 0 0 7>; |
| 447 |
interrupt-map = <0 0 0 1 &pcie1_intc 0>, |
| 448 |
<0 0 0 2 &pcie1_intc 1>, |
| 449 |
<0 0 0 3 &pcie1_intc 2>, |
| 450 |
<0 0 0 4 &pcie1_intc 3>; |
| 451 |
marvell,pcie-port = <0>; |
| 452 |
marvell,pcie-lane = <0>; |
| 453 |
clocks = <&gateclk 8>; |
| 454 |
status = "disabled"; |
| 455 |
|
| 456 |
pcie1_intc: interrupt-controller { |
| 457 |
interrupt-controller; |
| 458 |
#interrupt-cells = <1>; |
| 459 |
}; |
| 460 |
}; |
| 461 |
|
| 462 |
/* x1 port */ |
| 463 |
pcie@2,0 { |
| 464 |
device_type = "pci"; |
| 465 |
assigned-addresses = <0x82001000 0 0x40000 0 0x2000>; |
| 466 |
reg = <0x1000 0 0 0 0>; |
| 467 |
#address-cells = <3>; |
| 468 |
#size-cells = <2>; |
| 469 |
interrupt-names = "intx"; |
| 470 |
interrupts-extended = <&gic GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; |
| 471 |
#interrupt-cells = <1>; |
| 472 |
ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0 |
| 473 |
0x81000000 0 0 0x81000000 0x2 0 1 0>; |
| 474 |
bus-range = <0x00 0xff>; |
| 475 |
interrupt-map-mask = <0 0 0 7>; |
| 476 |
interrupt-map = <0 0 0 1 &pcie2_intc 0>, |
| 477 |
<0 0 0 2 &pcie2_intc 1>, |
| 478 |
<0 0 0 3 &pcie2_intc 2>, |
| 479 |
<0 0 0 4 &pcie2_intc 3>; |
| 480 |
marvell,pcie-port = <1>; |
| 481 |
marvell,pcie-lane = <0>; |
| 482 |
clocks = <&gateclk 5>; |
| 483 |
status = "disabled"; |
| 484 |
|
| 485 |
pcie2_intc: interrupt-controller { |
| 486 |
interrupt-controller; |
| 487 |
#interrupt-cells = <1>; |
| 488 |
}; |
| 489 |
}; |
| 490 |
|
| 491 |
/* x1 port */ |
| 492 |
pcie@3,0 { |
| 493 |
device_type = "pci"; |
| 494 |
assigned-addresses = <0x82001800 0 0x44000 0 0x2000>; |
| 495 |
reg = <0x1800 0 0 0 0>; |
| 496 |
#address-cells = <3>; |
| 497 |
#size-cells = <2>; |
| 498 |
interrupt-names = "intx"; |
| 499 |
interrupts-extended = <&gic GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>; |
| 500 |
#interrupt-cells = <1>; |
| 501 |
ranges = <0x82000000 0 0 0x82000000 0x3 0 1 0 |
| 502 |
0x81000000 0 0 0x81000000 0x3 0 1 0>; |
| 503 |
bus-range = <0x00 0xff>; |
| 504 |
interrupt-map-mask = <0 0 0 7>; |
| 505 |
interrupt-map = <0 0 0 1 &pcie3_intc 0>, |
| 506 |
<0 0 0 2 &pcie3_intc 1>, |
| 507 |
<0 0 0 3 &pcie3_intc 2>, |
| 508 |
<0 0 0 4 &pcie3_intc 3>; |
| 509 |
marvell,pcie-port = <2>; |
| 510 |
marvell,pcie-lane = <0>; |
| 511 |
clocks = <&gateclk 6>; |
| 512 |
status = "disabled"; |
| 513 |
|
| 514 |
pcie3_intc: interrupt-controller { |
| 515 |
interrupt-controller; |
| 516 |
#interrupt-cells = <1>; |
| 517 |
}; |
| 518 |
}; |
| 519 |
|
| 520 |
/* |
| 521 |
* x1 port only available when pcie@1,0 is |
| 522 |
* configured as a x1 port |
| 523 |
*/ |
| 524 |
pcie@4,0 { |
| 525 |
device_type = "pci"; |
| 526 |
assigned-addresses = <0x82002000 0 0x48000 0 0x2000>; |
| 527 |
reg = <0x2000 0 0 0 0>; |
| 528 |
#address-cells = <3>; |
| 529 |
#size-cells = <2>; |
| 530 |
interrupt-names = "intx"; |
| 531 |
interrupts-extended = <&gic GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>; |
| 532 |
#interrupt-cells = <1>; |
| 533 |
ranges = <0x82000000 0 0 0x82000000 0x4 0 1 0 |
| 534 |
0x81000000 0 0 0x81000000 0x4 0 1 0>; |
| 535 |
bus-range = <0x00 0xff>; |
| 536 |
interrupt-map-mask = <0 0 0 7>; |
| 537 |
interrupt-map = <0 0 0 1 &pcie4_intc 0>, |
| 538 |
<0 0 0 2 &pcie4_intc 1>, |
| 539 |
<0 0 0 3 &pcie4_intc 2>, |
| 540 |
<0 0 0 4 &pcie4_intc 3>; |
| 541 |
marvell,pcie-port = <3>; |
| 542 |
marvell,pcie-lane = <0>; |
| 543 |
clocks = <&gateclk 7>; |
| 544 |
status = "disabled"; |
| 545 |
|
| 546 |
pcie4_intc: interrupt-controller { |
| 547 |
interrupt-controller; |
| 548 |
#interrupt-cells = <1>; |
| 549 |
}; |
| 550 |
}; |
| 551 |
}; |
| 552 |
|
| 553 |
spi0: spi@10600 { |
| 554 |
compatible = "marvell,armada-390-spi", |
| 555 |
"marvell,orion-spi"; |
| 556 |
reg = <MBUS_ID(0xf0, 0x01) 0x10600 0x50>; |
| 557 |
#address-cells = <1>; |
| 558 |
#size-cells = <0>; |
| 559 |
cell-index = <0>; |
| 560 |
interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>; |
| 561 |
clocks = <&coreclk 0>; |
| 562 |
status = "disabled"; |
| 563 |
}; |
| 564 |
|
| 565 |
spi1: spi@10680 { |
| 566 |
compatible = "marvell,armada-390-spi", |
| 567 |
"marvell,orion-spi"; |
| 568 |
reg = <MBUS_ID(0xf0, 0x01) 0x10680 0x50>; |
| 569 |
#address-cells = <1>; |
| 570 |
#size-cells = <0>; |
| 571 |
cell-index = <1>; |
| 572 |
interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>; |
| 573 |
clocks = <&coreclk 0>; |
| 574 |
status = "disabled"; |
| 575 |
}; |
| 576 |
}; |
| 577 |
|
| 578 |
clocks { |
| 579 |
/* 1 GHz fixed main PLL */ |
| 580 |
mainpll: mainpll { |
| 581 |
compatible = "fixed-clock"; |
| 582 |
#clock-cells = <0>; |
| 583 |
clock-frequency = <1000000000>; |
| 584 |
}; |
| 585 |
|
| 586 |
/* 25 MHz reference crystal */ |
| 587 |
refclk: oscillator { |
| 588 |
compatible = "fixed-clock"; |
| 589 |
#clock-cells = <0>; |
| 590 |
clock-frequency = <25000000>; |
| 591 |
}; |
| 592 |
}; |
| 593 |
}; |