| 1 |
// SPDX-License-Identifier: (GPL-2.0 OR MIT) |
| 2 |
/* |
| 3 |
* Device Tree include file for SolidRun Clearfog 88F6828 based boards |
| 4 |
* |
| 5 |
* Copyright (C) 2015 Russell King |
| 6 |
*/ |
| 7 |
|
| 8 |
#include "armada-388.dtsi" |
| 9 |
#include "armada-38x-solidrun-microsom.dtsi" |
| 10 |
|
| 11 |
/ { |
| 12 |
aliases { |
| 13 |
/* So that mvebu u-boot can update the MAC addresses */ |
| 14 |
ethernet1 = ð0; |
| 15 |
ethernet2 = ð1; |
| 16 |
ethernet3 = ð2; |
| 17 |
}; |
| 18 |
|
| 19 |
chosen { |
| 20 |
stdout-path = "serial0:115200n8"; |
| 21 |
}; |
| 22 |
|
| 23 |
reg_3p3v: regulator-3p3v { |
| 24 |
compatible = "regulator-fixed"; |
| 25 |
regulator-name = "3P3V"; |
| 26 |
regulator-min-microvolt = <3300000>; |
| 27 |
regulator-max-microvolt = <3300000>; |
| 28 |
regulator-always-on; |
| 29 |
}; |
| 30 |
|
| 31 |
soc { |
| 32 |
internal-regs { |
| 33 |
sata@a8000 { |
| 34 |
/* pinctrl? */ |
| 35 |
status = "okay"; |
| 36 |
}; |
| 37 |
|
| 38 |
sata@e0000 { |
| 39 |
/* pinctrl? */ |
| 40 |
status = "okay"; |
| 41 |
}; |
| 42 |
|
| 43 |
sdhci@d8000 { |
| 44 |
bus-width = <4>; |
| 45 |
cd-gpios = <&gpio0 20 GPIO_ACTIVE_LOW>; |
| 46 |
no-1-8-v; |
| 47 |
pinctrl-0 = <µsom_sdhci_pins |
| 48 |
&clearfog_sdhci_cd_pins>; |
| 49 |
pinctrl-names = "default"; |
| 50 |
status = "okay"; |
| 51 |
vmmc-supply = <®_3p3v>; |
| 52 |
wp-inverted; |
| 53 |
}; |
| 54 |
|
| 55 |
usb@58000 { |
| 56 |
/* CON3, nearest power. */ |
| 57 |
status = "okay"; |
| 58 |
}; |
| 59 |
|
| 60 |
usb3@f8000 { |
| 61 |
/* CON7 */ |
| 62 |
status = "okay"; |
| 63 |
}; |
| 64 |
}; |
| 65 |
|
| 66 |
pcie { |
| 67 |
status = "okay"; |
| 68 |
/* |
| 69 |
* The two PCIe units are accessible through |
| 70 |
* the mini-PCIe connectors on the board. |
| 71 |
*/ |
| 72 |
pcie@2,0 { |
| 73 |
/* Port 1, Lane 0. CON3, nearest power. */ |
| 74 |
reset-gpios = <&expander0 1 GPIO_ACTIVE_LOW>; |
| 75 |
status = "okay"; |
| 76 |
}; |
| 77 |
}; |
| 78 |
}; |
| 79 |
|
| 80 |
sfp: sfp { |
| 81 |
compatible = "sff,sfp"; |
| 82 |
i2c-bus = <&i2c1>; |
| 83 |
los-gpio = <&expander0 12 GPIO_ACTIVE_HIGH>; |
| 84 |
mod-def0-gpio = <&expander0 15 GPIO_ACTIVE_LOW>; |
| 85 |
tx-disable-gpio = <&expander0 14 GPIO_ACTIVE_HIGH>; |
| 86 |
tx-fault-gpio = <&expander0 13 GPIO_ACTIVE_HIGH>; |
| 87 |
maximum-power-milliwatt = <2000>; |
| 88 |
}; |
| 89 |
}; |
| 90 |
|
| 91 |
ð1 { |
| 92 |
/* ethernet@30000 */ |
| 93 |
bm,pool-long = <2>; |
| 94 |
bm,pool-short = <1>; |
| 95 |
buffer-manager = <&bm>; |
| 96 |
phys = <&comphy1 1>; |
| 97 |
phy-mode = "sgmii"; |
| 98 |
status = "okay"; |
| 99 |
}; |
| 100 |
|
| 101 |
ð2 { |
| 102 |
/* ethernet@34000 */ |
| 103 |
bm,pool-long = <3>; |
| 104 |
bm,pool-short = <1>; |
| 105 |
buffer-manager = <&bm>; |
| 106 |
managed = "in-band-status"; |
| 107 |
phys = <&comphy5 2>; |
| 108 |
phy-mode = "sgmii"; |
| 109 |
sfp = <&sfp>; |
| 110 |
status = "okay"; |
| 111 |
}; |
| 112 |
|
| 113 |
&i2c0 { |
| 114 |
/* |
| 115 |
* PCA9655 GPIO expander, up to 1MHz clock. |
| 116 |
* 0-CON3 CLKREQ# |
| 117 |
* 1-CON3 PERST# |
| 118 |
* 2- |
| 119 |
* 3-CON3 W_DISABLE |
| 120 |
* 4- |
| 121 |
* 5-USB3 overcurrent |
| 122 |
* 6-USB3 power |
| 123 |
* 7- |
| 124 |
* 8-JP4 P1 |
| 125 |
* 9-JP4 P4 |
| 126 |
* 10-JP4 P5 |
| 127 |
* 11-m.2 DEVSLP |
| 128 |
* 12-SFP_LOS |
| 129 |
* 13-SFP_TX_FAULT |
| 130 |
* 14-SFP_TX_DISABLE |
| 131 |
* 15-SFP_MOD_DEF0 |
| 132 |
*/ |
| 133 |
expander0: gpio-expander@20 { |
| 134 |
/* |
| 135 |
* This is how it should be: |
| 136 |
* compatible = "onnn,pca9655", "nxp,pca9555"; |
| 137 |
* but you can't do this because of the way I2C works. |
| 138 |
*/ |
| 139 |
compatible = "nxp,pca9555"; |
| 140 |
gpio-controller; |
| 141 |
#gpio-cells = <2>; |
| 142 |
reg = <0x20>; |
| 143 |
|
| 144 |
pcie1-0-clkreq-hog { |
| 145 |
gpio-hog; |
| 146 |
gpios = <0 GPIO_ACTIVE_LOW>; |
| 147 |
input; |
| 148 |
line-name = "pcie1.0-clkreq"; |
| 149 |
}; |
| 150 |
pcie1-0-w-disable-hog { |
| 151 |
gpio-hog; |
| 152 |
gpios = <3 GPIO_ACTIVE_LOW>; |
| 153 |
output-low; |
| 154 |
line-name = "pcie1.0-w-disable"; |
| 155 |
}; |
| 156 |
usb3-ilimit-hog { |
| 157 |
gpio-hog; |
| 158 |
gpios = <5 GPIO_ACTIVE_LOW>; |
| 159 |
input; |
| 160 |
line-name = "usb3-current-limit"; |
| 161 |
}; |
| 162 |
usb3-power-hog { |
| 163 |
gpio-hog; |
| 164 |
gpios = <6 GPIO_ACTIVE_HIGH>; |
| 165 |
output-high; |
| 166 |
line-name = "usb3-power"; |
| 167 |
}; |
| 168 |
m2-devslp-hog { |
| 169 |
gpio-hog; |
| 170 |
gpios = <11 GPIO_ACTIVE_HIGH>; |
| 171 |
output-low; |
| 172 |
line-name = "m.2 devslp"; |
| 173 |
}; |
| 174 |
}; |
| 175 |
|
| 176 |
/* The MCP3021 supports standard and fast modes */ |
| 177 |
mikrobus_adc: mcp3021@4c { |
| 178 |
compatible = "microchip,mcp3021"; |
| 179 |
reg = <0x4c>; |
| 180 |
}; |
| 181 |
|
| 182 |
eeprom@52 { |
| 183 |
compatible = "atmel,24c02"; |
| 184 |
reg = <0x52>; |
| 185 |
pagesize = <16>; |
| 186 |
}; |
| 187 |
}; |
| 188 |
|
| 189 |
&i2c1 { |
| 190 |
/* |
| 191 |
* Routed to SFP, mikrobus, and PCIe. |
| 192 |
* SFP limits this to 100kHz, and requires an AT24C01A/02/04 with |
| 193 |
* address pins tied low, which takes addresses 0x50 and 0x51. |
| 194 |
* Mikrobus doesn't specify beyond an I2C bus being present. |
| 195 |
* PCIe uses ARP to assign addresses, or 0x63-0x64. |
| 196 |
*/ |
| 197 |
clock-frequency = <100000>; |
| 198 |
pinctrl-0 = <&clearfog_i2c1_pins>; |
| 199 |
pinctrl-names = "default"; |
| 200 |
status = "okay"; |
| 201 |
}; |
| 202 |
|
| 203 |
&pinctrl { |
| 204 |
clearfog_i2c1_pins: i2c1-pins { |
| 205 |
/* SFP, PCIe, mSATA, mikrobus */ |
| 206 |
marvell,pins = "mpp26", "mpp27"; |
| 207 |
marvell,function = "i2c1"; |
| 208 |
}; |
| 209 |
clearfog_sdhci_cd_pins: clearfog-sdhci-cd-pins { |
| 210 |
marvell,pins = "mpp20"; |
| 211 |
marvell,function = "gpio"; |
| 212 |
}; |
| 213 |
mikro_pins: mikro-pins { |
| 214 |
/* int: mpp22 rst: mpp29 */ |
| 215 |
marvell,pins = "mpp22", "mpp29"; |
| 216 |
marvell,function = "gpio"; |
| 217 |
}; |
| 218 |
mikro_spi_pins: mikro-spi-pins { |
| 219 |
marvell,pins = "mpp43"; |
| 220 |
marvell,function = "spi1"; |
| 221 |
}; |
| 222 |
mikro_uart_pins: mikro-uart-pins { |
| 223 |
marvell,pins = "mpp24", "mpp25"; |
| 224 |
marvell,function = "ua1"; |
| 225 |
}; |
| 226 |
}; |
| 227 |
|
| 228 |
&spi1 { |
| 229 |
/* |
| 230 |
* Add SPI CS pins for clearfog: |
| 231 |
* CS0: W25Q32 |
| 232 |
* CS1: PIC microcontroller (Pro models) |
| 233 |
* CS2: mikrobus |
| 234 |
*/ |
| 235 |
pinctrl-0 = <&spi1_pins &mikro_spi_pins>; |
| 236 |
pinctrl-names = "default"; |
| 237 |
status = "okay"; |
| 238 |
}; |
| 239 |
|
| 240 |
&uart1 { |
| 241 |
/* mikrobus uart */ |
| 242 |
pinctrl-0 = <&mikro_uart_pins>; |
| 243 |
pinctrl-names = "default"; |
| 244 |
status = "okay"; |
| 245 |
}; |