Debian Codegraph @

arch/arm/boot/dts/marvell/armada-385-turris-omnia.dts

raw
1 // SPDX-License-Identifier: (GPL-2.0 OR MIT)
2 /*
3 * Device Tree file for the Turris Omnia
4 *
5 * Copyright (C) 2016 Uwe Kleine-König <[email protected]>
6 * Copyright (C) 2016 Tomas Hlavacek <[email protected]>
7 *
8 * Schematic available at https://www.turris.cz/doc/_media/rtrom01-schema.pdf
9 */
10
11 /dts-v1/;
12
13 #include <dt-bindings/gpio/gpio.h>
14 #include <dt-bindings/input/input.h>
15 #include <dt-bindings/leds/common.h>
16 #include "armada-385.dtsi"
17
18 / {
19 model = "Turris Omnia";
20 compatible = "cznic,turris-omnia", "marvell,armada385", "marvell,armada380";
21
22 chosen {
23 stdout-path = &uart0;
24 };
25
26 aliases {
27 ethernet0 = &eth0;
28 ethernet1 = &eth1;
29 ethernet2 = &eth2;
30 };
31
32 memory {
33 device_type = "memory";
34 reg = <0x00000000 0x40000000>; /* 1024 MB */
35 };
36
37 soc {
38 ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
39 MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000
40 MBUS_ID(0x09, 0x19) 0 0xf1100000 0x10000
41 MBUS_ID(0x09, 0x15) 0 0xf1110000 0x10000
42 MBUS_ID(0x0c, 0x04) 0 0xf1200000 0x100000>;
43
44 internal-regs {
45
46 /* USB part of the PCIe2/USB 2.0 port */
47 usb@58000 {
48 status = "okay";
49 };
50
51 sata@a8000 {
52 status = "okay";
53 };
54
55 sdhci@d8000 {
56 pinctrl-names = "default";
57 pinctrl-0 = <&sdhci_pins>;
58 status = "okay";
59
60 bus-width = <8>;
61 no-1-8-v;
62 non-removable;
63 };
64
65 usb3@f0000 {
66 status = "okay";
67 };
68
69 usb3@f8000 {
70 status = "okay";
71 };
72 };
73
74 pcie {
75 status = "okay";
76
77 pcie@1,0 {
78 /* Port 0, Lane 0 */
79 status = "okay";
80 slot-power-limit-milliwatt = <10000>;
81 };
82
83 pcie@2,0 {
84 /* Port 1, Lane 0 */
85 status = "okay";
86 slot-power-limit-milliwatt = <10000>;
87 };
88
89 pcie@3,0 {
90 /* Port 2, Lane 0 */
91 status = "okay";
92 slot-power-limit-milliwatt = <10000>;
93 };
94 };
95 };
96
97 sfp: sfp {
98 compatible = "sff,sfp";
99 i2c-bus = <&sfp_i2c>;
100 tx-fault-gpios = <&pcawan 0 GPIO_ACTIVE_HIGH>;
101 tx-disable-gpios = <&pcawan 1 GPIO_ACTIVE_HIGH>;
102 rate-select0-gpios = <&pcawan 2 GPIO_ACTIVE_HIGH>;
103 los-gpios = <&pcawan 3 GPIO_ACTIVE_HIGH>;
104 mod-def0-gpios = <&pcawan 4 GPIO_ACTIVE_LOW>;
105 maximum-power-milliwatt = <3000>;
106
107 /*
108 * For now this has to be enabled at boot time by U-Boot when
109 * a SFP module is present. Read more in the comment in the
110 * eth2 node below.
111 */
112 status = "disabled";
113 };
114
115 gpio-keys {
116 compatible = "gpio-keys";
117
118 front-button {
119 label = "Front Button";
120 linux,code = <KEY_VENDOR>;
121 linux,can-disable;
122 gpios = <&mcu 0 12 GPIO_ACTIVE_HIGH>;
123 /* debouncing is done by the microcontroller */
124 debounce-interval = <0>;
125 };
126 };
127
128 sound {
129 compatible = "simple-audio-card";
130 simple-audio-card,name = "SPDIF";
131 simple-audio-card,format = "i2s";
132
133 simple-audio-card,cpu {
134 sound-dai = <&audio_controller 1>;
135 };
136
137 simple-audio-card,codec {
138 sound-dai = <&spdif_out>;
139 };
140 };
141
142 spdif_out: spdif-out {
143 #sound-dai-cells = <0>;
144 compatible = "linux,spdif-dit";
145 };
146 };
147
148 &audio_controller {
149 /* Pin header U16, GPIO51 in SPDIFO mode */
150 pinctrl-0 = <&spdif_pins>;
151 pinctrl-names = "default";
152 spdif-mode;
153 status = "okay";
154 };
155
156 &bm {
157 status = "okay";
158 };
159
160 &bm_bppi {
161 status = "okay";
162 };
163
164 /* Connected to 88E6176 switch, port 6 */
165 &eth0 {
166 pinctrl-names = "default";
167 pinctrl-0 = <&ge0_rgmii_pins>;
168 status = "okay";
169 phy-mode = "rgmii";
170 buffer-manager = <&bm>;
171 bm,pool-long = <0>;
172 bm,pool-short = <3>;
173
174 fixed-link {
175 speed = <1000>;
176 full-duplex;
177 };
178 };
179
180 /* Connected to 88E6176 switch, port 5 */
181 &eth1 {
182 pinctrl-names = "default";
183 pinctrl-0 = <&ge1_rgmii_pins>;
184 status = "okay";
185 phy-mode = "rgmii";
186 buffer-manager = <&bm>;
187 bm,pool-long = <1>;
188 bm,pool-short = <3>;
189
190 fixed-link {
191 speed = <1000>;
192 full-duplex;
193 };
194 };
195
196 /* WAN port */
197 &eth2 {
198 /*
199 * eth2 is connected via a multiplexor to both the SFP cage and to
200 * ethernet-phy@1. The multiplexor switches the signal to SFP cage when
201 * a SFP module is present, as determined by the mode-def0 GPIO.
202 *
203 * Until kernel supports this configuration properly, in case SFP module
204 * is present, U-Boot has to enable the sfp node above, remove phy
205 * handle and add managed = "in-band-status" property.
206 */
207 status = "okay";
208 phy-mode = "sgmii";
209 phy-handle = <&phy1>;
210 phys = <&comphy5 2>;
211 sfp = <&sfp>;
212 buffer-manager = <&bm>;
213 bm,pool-long = <2>;
214 bm,pool-short = <3>;
215 label = "wan";
216 };
217
218 &i2c0 {
219 pinctrl-names = "default";
220 pinctrl-0 = <&i2c0_pins>;
221 status = "okay";
222
223 i2cmux@70 {
224 compatible = "nxp,pca9547";
225 #address-cells = <1>;
226 #size-cells = <0>;
227 reg = <0x70>;
228
229 i2c@0 {
230 #address-cells = <1>;
231 #size-cells = <0>;
232 reg = <0>;
233
234 mcu: system-controller@2a {
235 compatible = "cznic,turris-omnia-mcu";
236 reg = <0x2a>;
237
238 pinctrl-names = "default";
239 pinctrl-0 = <&mcu_pins>;
240
241 interrupt-parent = <&gpio1>;
242 interrupts = <11 IRQ_TYPE_NONE>;
243
244 gpio-controller;
245 #gpio-cells = <3>;
246
247 interrupt-controller;
248 #interrupt-cells = <2>;
249 };
250
251 led-controller@2b {
252 compatible = "cznic,turris-omnia-leds";
253 reg = <0x2b>;
254 interrupts-extended = <&mcu 11 IRQ_TYPE_NONE>;
255 #address-cells = <1>;
256 #size-cells = <0>;
257 status = "okay";
258
259 /*
260 * LEDs are controlled by MCU (STM32F0) at
261 * address 0x2b.
262 *
263 * LED functions are not stable yet:
264 * - there are 3 LEDs connected via MCU to PCIe
265 * ports. One of these ports supports mSATA.
266 * There is no mSATA nor PCIe function.
267 * For now we use LED_FUNCTION_WLAN, since
268 * in most cases users have wifi cards in
269 * these slots
270 * - there are 2 LEDs dedicated for user: A and
271 * B. Again there is no such function defined.
272 * For now we use LED_FUNCTION_INDICATOR
273 */
274
275 multi-led@0 {
276 reg = <0x0>;
277 color = <LED_COLOR_ID_RGB>;
278 function = LED_FUNCTION_INDICATOR;
279 function-enumerator = <2>;
280 };
281
282 multi-led@1 {
283 reg = <0x1>;
284 color = <LED_COLOR_ID_RGB>;
285 function = LED_FUNCTION_INDICATOR;
286 function-enumerator = <1>;
287 };
288
289 multi-led@2 {
290 reg = <0x2>;
291 color = <LED_COLOR_ID_RGB>;
292 function = LED_FUNCTION_WLAN;
293 function-enumerator = <3>;
294 };
295
296 multi-led@3 {
297 reg = <0x3>;
298 color = <LED_COLOR_ID_RGB>;
299 function = LED_FUNCTION_WLAN;
300 function-enumerator = <2>;
301 };
302
303 multi-led@4 {
304 reg = <0x4>;
305 color = <LED_COLOR_ID_RGB>;
306 function = LED_FUNCTION_WLAN;
307 function-enumerator = <1>;
308 };
309
310 multi-led@5 {
311 reg = <0x5>;
312 color = <LED_COLOR_ID_RGB>;
313 function = LED_FUNCTION_WAN;
314 };
315
316 multi-led@6 {
317 reg = <0x6>;
318 color = <LED_COLOR_ID_RGB>;
319 function = LED_FUNCTION_LAN;
320 function-enumerator = <4>;
321 };
322
323 multi-led@7 {
324 reg = <0x7>;
325 color = <LED_COLOR_ID_RGB>;
326 function = LED_FUNCTION_LAN;
327 function-enumerator = <3>;
328 };
329
330 multi-led@8 {
331 reg = <0x8>;
332 color = <LED_COLOR_ID_RGB>;
333 function = LED_FUNCTION_LAN;
334 function-enumerator = <2>;
335 };
336
337 multi-led@9 {
338 reg = <0x9>;
339 color = <LED_COLOR_ID_RGB>;
340 function = LED_FUNCTION_LAN;
341 function-enumerator = <1>;
342 };
343
344 multi-led@a {
345 reg = <0xa>;
346 color = <LED_COLOR_ID_RGB>;
347 function = LED_FUNCTION_LAN;
348 function-enumerator = <0>;
349 };
350
351 multi-led@b {
352 reg = <0xb>;
353 color = <LED_COLOR_ID_RGB>;
354 function = LED_FUNCTION_POWER;
355 };
356 };
357
358 eeprom@54 {
359 compatible = "atmel,24c64";
360 reg = <0x54>;
361
362 /* The EEPROM contains data for bootloader.
363 * Contents:
364 * struct omnia_eeprom {
365 * u32 magic; (=0x0341a034 in LE)
366 * u32 ramsize; (in GiB)
367 * char regdomain[4];
368 * u32 crc32;
369 * };
370 */
371 };
372 };
373
374 i2c@1 {
375 #address-cells = <1>;
376 #size-cells = <0>;
377 reg = <1>;
378
379 /* routed to PCIe0/mSATA connector (CN7A) */
380 };
381
382 i2c@2 {
383 #address-cells = <1>;
384 #size-cells = <0>;
385 reg = <2>;
386
387 /* routed to PCIe1/USB2 connector (CN61A) */
388 };
389
390 i2c@3 {
391 #address-cells = <1>;
392 #size-cells = <0>;
393 reg = <3>;
394
395 /* routed to PCIe2 connector (CN62A) */
396 };
397
398 sfp_i2c: i2c@4 {
399 #address-cells = <1>;
400 #size-cells = <0>;
401 reg = <4>;
402
403 /* routed to SFP+ */
404 };
405
406 i2c@5 {
407 #address-cells = <1>;
408 #size-cells = <0>;
409 reg = <5>;
410
411 /* ATSHA204A-MAHDA-T crypto module */
412 crypto@64 {
413 compatible = "atmel,atsha204a";
414 reg = <0x64>;
415 };
416 };
417
418 i2c@6 {
419 #address-cells = <1>;
420 #size-cells = <0>;
421 reg = <6>;
422
423 /* exposed on pin header */
424 };
425
426 i2c@7 {
427 #address-cells = <1>;
428 #size-cells = <0>;
429 reg = <7>;
430
431 pcawan: gpio@71 {
432 /*
433 * GPIO expander for SFP+ signals and
434 * and phy irq
435 */
436 compatible = "nxp,pca9538";
437 reg = <0x71>;
438
439 pinctrl-names = "default";
440 pinctrl-0 = <&pcawan_pins>;
441
442 interrupt-parent = <&gpio1>;
443 interrupts = <14 IRQ_TYPE_LEVEL_LOW>;
444
445 gpio-controller;
446 #gpio-cells = <2>;
447 };
448 };
449 };
450 };
451
452 &mdio {
453 pinctrl-names = "default";
454 pinctrl-0 = <&mdio_pins>;
455 status = "okay";
456
457 phy1: ethernet-phy@1 {
458 compatible = "ethernet-phy-ieee802.3-c22";
459 reg = <1>;
460 marvell,reg-init = <3 18 0 0x4985>,
461 <3 16 0xfff0 0x0001>;
462
463 /* irq is connected to &pcawan pin 7 */
464 };
465
466 /* Switch MV88E6176 at address 0x10 */
467 ethernet-switch@10 {
468 pinctrl-names = "default";
469 pinctrl-0 = <&swint_pins>;
470 compatible = "marvell,mv88e6085";
471
472 dsa,member = <0 0>;
473 reg = <0x10>;
474
475 interrupt-parent = <&gpio1>;
476 interrupts = <13 IRQ_TYPE_LEVEL_LOW>;
477
478 ethernet-ports {
479 #address-cells = <1>;
480 #size-cells = <0>;
481
482 ethernet-port@0 {
483 reg = <0>;
484 label = "lan0";
485 };
486
487 ethernet-port@1 {
488 reg = <1>;
489 label = "lan1";
490 };
491
492 ethernet-port@2 {
493 reg = <2>;
494 label = "lan2";
495 };
496
497 ethernet-port@3 {
498 reg = <3>;
499 label = "lan3";
500 };
501
502 ethernet-port@4 {
503 reg = <4>;
504 label = "lan4";
505 };
506
507 ethernet-port@5 {
508 reg = <5>;
509 ethernet = <&eth1>;
510 phy-mode = "rgmii-id";
511
512 fixed-link {
513 speed = <1000>;
514 full-duplex;
515 };
516 };
517
518 ethernet-port@6 {
519 reg = <6>;
520 ethernet = <&eth0>;
521 phy-mode = "rgmii-id";
522
523 fixed-link {
524 speed = <1000>;
525 full-duplex;
526 };
527 };
528 };
529 };
530 };
531
532 &pinctrl {
533 mcu_pins: mcu-pins {
534 marvell,pins = "mpp43";
535 marvell,function = "gpio";
536 };
537
538 pcawan_pins: pcawan-pins {
539 marvell,pins = "mpp46";
540 marvell,function = "gpio";
541 };
542
543 swint_pins: swint-pins {
544 marvell,pins = "mpp45";
545 marvell,function = "gpio";
546 };
547
548 spi0cs0_pins: spi0cs0-pins {
549 marvell,pins = "mpp25";
550 marvell,function = "spi0";
551 };
552
553 spi0cs2_pins: spi0cs2-pins {
554 marvell,pins = "mpp26";
555 marvell,function = "spi0";
556 };
557 };
558
559 &spi0 {
560 pinctrl-names = "default";
561 pinctrl-0 = <&spi0_pins &spi0cs0_pins>;
562 status = "okay";
563
564 flash@0 {
565 compatible = "spansion,s25fl164k", "jedec,spi-nor";
566 #address-cells = <1>;
567 #size-cells = <1>;
568 reg = <0>;
569 spi-max-frequency = <40000000>;
570
571 partitions {
572 compatible = "fixed-partitions";
573 #address-cells = <1>;
574 #size-cells = <1>;
575
576 partition@0 {
577 reg = <0x0 0x00100000>;
578 label = "U-Boot";
579 };
580
581 partition@100000 {
582 reg = <0x00100000 0x00700000>;
583 label = "Rescue system";
584 };
585 };
586 };
587
588 /* MISO, MOSI, SCLK and CS2 are routed to pin header CN11 */
589 };
590
591 &uart0 {
592 /* Pin header CN10 */
593 pinctrl-names = "default";
594 pinctrl-0 = <&uart0_pins>;
595 status = "okay";
596 };
597
598 &uart1 {
599 /* Pin header CN11 */
600 pinctrl-names = "default";
601 pinctrl-0 = <&uart1_pins>;
602 status = "okay";
603 };