| 1 |
// SPDX-License-Identifier: GPL-2.0 |
| 2 |
/* |
| 3 |
* Device Tree file for LaCie 2Big NAS |
| 4 |
* |
| 5 |
* Copyright (C) 2015 Seagate |
| 6 |
* |
| 7 |
* Author: Simon Guinot <[email protected]> |
| 8 |
* |
| 9 |
*/ |
| 10 |
|
| 11 |
/dts-v1/; |
| 12 |
|
| 13 |
#include "kirkwood-netxbig.dtsi" |
| 14 |
|
| 15 |
/ { |
| 16 |
model = "LaCie 2Big NAS"; |
| 17 |
compatible = "lacie,nas2big", "lacie,netxbig", "marvell,kirkwood-88f6282", "marvell,kirkwood"; |
| 18 |
|
| 19 |
memory { |
| 20 |
device_type = "memory"; |
| 21 |
reg = <0x00000000 0x10000000>; |
| 22 |
}; |
| 23 |
|
| 24 |
chosen { |
| 25 |
bootargs = "console=ttyS0,115200n8"; |
| 26 |
stdout-path = &uart0; |
| 27 |
}; |
| 28 |
|
| 29 |
ocp@f1000000 { |
| 30 |
rtc@10300 { |
| 31 |
/* The on-chip RTC is not powered (no supercap). */ |
| 32 |
status = "disabled"; |
| 33 |
}; |
| 34 |
spi@10600 { |
| 35 |
/* |
| 36 |
* A NAND flash is used instead of an SPI flash for |
| 37 |
* the other netxbig-compatible boards. |
| 38 |
*/ |
| 39 |
status = "disabled"; |
| 40 |
}; |
| 41 |
}; |
| 42 |
|
| 43 |
fan { |
| 44 |
/* |
| 45 |
* An I2C fan controller (GMT G762) is used but alarm is |
| 46 |
* wired to a separate GPIO. |
| 47 |
*/ |
| 48 |
compatible = "gpio-fan"; |
| 49 |
alarm-gpios = <&gpio0 25 GPIO_ACTIVE_LOW>; |
| 50 |
}; |
| 51 |
|
| 52 |
regulators: regulators { |
| 53 |
status = "okay"; |
| 54 |
compatible = "simple-bus"; |
| 55 |
#address-cells = <1>; |
| 56 |
#size-cells = <0>; |
| 57 |
pinctrl-names = "default"; |
| 58 |
|
| 59 |
regulator@2 { |
| 60 |
compatible = "regulator-fixed"; |
| 61 |
reg = <2>; |
| 62 |
regulator-name = "hdd1power"; |
| 63 |
regulator-min-microvolt = <5000000>; |
| 64 |
regulator-max-microvolt = <5000000>; |
| 65 |
enable-active-high; |
| 66 |
regulator-always-on; |
| 67 |
regulator-boot-on; |
| 68 |
gpio = <&gpio0 17 GPIO_ACTIVE_HIGH>; |
| 69 |
}; |
| 70 |
clocks { |
| 71 |
g762_clk: g762-oscillator { |
| 72 |
compatible = "fixed-clock"; |
| 73 |
#clock-cells = <0>; |
| 74 |
clock-frequency = <32768>; |
| 75 |
}; |
| 76 |
}; |
| 77 |
}; |
| 78 |
}; |
| 79 |
|
| 80 |
&mdio { |
| 81 |
status = "okay"; |
| 82 |
|
| 83 |
ethphy0: ethernet-phy@0 { |
| 84 |
reg = <0>; |
| 85 |
}; |
| 86 |
}; |
| 87 |
|
| 88 |
&i2c0 { |
| 89 |
status = "okay"; |
| 90 |
|
| 91 |
/* |
| 92 |
* An external I2C RTC (Dallas DS1337S+) is used. This allows |
| 93 |
* to power-up the board on an RTC alarm. The external RTC can |
| 94 |
* be kept powered, even when the SoC is off. |
| 95 |
*/ |
| 96 |
rtc@68 { |
| 97 |
compatible = "dallas,ds1307"; |
| 98 |
reg = <0x68>; |
| 99 |
interrupts = <43>; |
| 100 |
}; |
| 101 |
g762@3e { |
| 102 |
compatible = "gmt,g762"; |
| 103 |
reg = <0x3e>; |
| 104 |
clocks = <&g762_clk>; |
| 105 |
}; |
| 106 |
}; |
| 107 |
|
| 108 |
&nand { |
| 109 |
chip-delay = <50>; |
| 110 |
status = "okay"; |
| 111 |
|
| 112 |
partition@0 { |
| 113 |
label = "U-Boot"; |
| 114 |
reg = <0x0 0x100000>; |
| 115 |
}; |
| 116 |
|
| 117 |
partition@100000 { |
| 118 |
label = "uImage"; |
| 119 |
reg = <0x100000 0x1000000>; |
| 120 |
}; |
| 121 |
|
| 122 |
partition@1100000 { |
| 123 |
label = "root"; |
| 124 |
reg = <0x1100000 0x8000000>; |
| 125 |
}; |
| 126 |
|
| 127 |
partition@9100000 { |
| 128 |
label = "unused"; |
| 129 |
reg = <0x9100000 0x6f00000>; |
| 130 |
}; |
| 131 |
}; |
| 132 |
|
| 133 |
&pciec { |
| 134 |
status = "okay"; |
| 135 |
}; |
| 136 |
|
| 137 |
&pcie0 { |
| 138 |
status = "okay"; |
| 139 |
}; |