| 1 |
// SPDX-License-Identifier: GPL-2.0 |
| 2 |
/ { |
| 3 |
mbus@f1000000 { |
| 4 |
pciec: pcie@82000000 { |
| 5 |
compatible = "marvell,kirkwood-pcie"; |
| 6 |
status = "disabled"; |
| 7 |
device_type = "pci"; |
| 8 |
|
| 9 |
#address-cells = <3>; |
| 10 |
#size-cells = <2>; |
| 11 |
|
| 12 |
bus-range = <0x00 0xff>; |
| 13 |
|
| 14 |
ranges = |
| 15 |
<0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000 |
| 16 |
0x82000000 0x1 0 MBUS_ID(0x04, 0xe8) 0 1 0 /* Port 0.0 MEM */ |
| 17 |
0x81000000 0x1 0 MBUS_ID(0x04, 0xe0) 0 1 0 /* Port 0.0 IO */>; |
| 18 |
|
| 19 |
pcie0: pcie@1,0 { |
| 20 |
device_type = "pci"; |
| 21 |
assigned-addresses = <0x82000800 0 0x00040000 0 0x2000>; |
| 22 |
reg = <0x0800 0 0 0 0>; |
| 23 |
#address-cells = <3>; |
| 24 |
#size-cells = <2>; |
| 25 |
#interrupt-cells = <1>; |
| 26 |
ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0 |
| 27 |
0x81000000 0 0 0x81000000 0x1 0 1 0>; |
| 28 |
bus-range = <0x00 0xff>; |
| 29 |
interrupt-names = "intx", "error"; |
| 30 |
interrupts = <9>, <44>; |
| 31 |
interrupt-map-mask = <0 0 0 7>; |
| 32 |
interrupt-map = <0 0 0 1 &pcie_intc 0>, |
| 33 |
<0 0 0 2 &pcie_intc 1>, |
| 34 |
<0 0 0 3 &pcie_intc 2>, |
| 35 |
<0 0 0 4 &pcie_intc 3>; |
| 36 |
marvell,pcie-port = <0>; |
| 37 |
marvell,pcie-lane = <0>; |
| 38 |
clocks = <&gate_clk 2>; |
| 39 |
status = "disabled"; |
| 40 |
|
| 41 |
pcie_intc: interrupt-controller { |
| 42 |
interrupt-controller; |
| 43 |
#interrupt-cells = <1>; |
| 44 |
}; |
| 45 |
}; |
| 46 |
}; |
| 47 |
}; |
| 48 |
|
| 49 |
ocp@f1000000 { |
| 50 |
pinctrl: pin-controller@10000 { |
| 51 |
compatible = "marvell,88f6192-pinctrl"; |
| 52 |
|
| 53 |
pmx_sata0: pmx-sata0 { |
| 54 |
marvell,pins = "mpp5", "mpp21", "mpp23"; |
| 55 |
marvell,function = "sata0"; |
| 56 |
}; |
| 57 |
pmx_sata1: pmx-sata1 { |
| 58 |
marvell,pins = "mpp4", "mpp20", "mpp22"; |
| 59 |
marvell,function = "sata1"; |
| 60 |
}; |
| 61 |
pmx_sdio: pmx-sdio { |
| 62 |
marvell,pins = "mpp12", "mpp13", "mpp14", |
| 63 |
"mpp15", "mpp16", "mpp17"; |
| 64 |
marvell,function = "sdio"; |
| 65 |
}; |
| 66 |
}; |
| 67 |
|
| 68 |
rtc: rtc@10300 { |
| 69 |
compatible = "marvell,kirkwood-rtc", "marvell,orion-rtc"; |
| 70 |
reg = <0x10300 0x20>; |
| 71 |
interrupts = <53>; |
| 72 |
clocks = <&gate_clk 7>; |
| 73 |
}; |
| 74 |
|
| 75 |
sata: sata@80000 { |
| 76 |
compatible = "marvell,orion-sata"; |
| 77 |
reg = <0x80000 0x5000>; |
| 78 |
interrupts = <21>; |
| 79 |
clocks = <&gate_clk 14>, <&gate_clk 15>; |
| 80 |
clock-names = "0", "1"; |
| 81 |
phys = <&sata_phy0>, <&sata_phy1>; |
| 82 |
phy-names = "port0", "port1"; |
| 83 |
status = "disabled"; |
| 84 |
}; |
| 85 |
|
| 86 |
sdio: mvsdio@90000 { |
| 87 |
compatible = "marvell,orion-sdio"; |
| 88 |
reg = <0x90000 0x200>; |
| 89 |
interrupts = <28>; |
| 90 |
clocks = <&gate_clk 4>; |
| 91 |
bus-width = <4>; |
| 92 |
cap-sdio-irq; |
| 93 |
cap-sd-highspeed; |
| 94 |
cap-mmc-highspeed; |
| 95 |
status = "disabled"; |
| 96 |
}; |
| 97 |
}; |
| 98 |
}; |