| 1 |
// SPDX-License-Identifier: (GPL-2.0 OR MIT) |
| 2 |
/* |
| 3 |
* Device Tree file for Synology DS116 NAS |
| 4 |
* |
| 5 |
* Copyright (C) 2017 Willy Tarreau <[email protected]> |
| 6 |
*/ |
| 7 |
|
| 8 |
/dts-v1/; |
| 9 |
#include "armada-385.dtsi" |
| 10 |
#include <dt-bindings/gpio/gpio.h> |
| 11 |
|
| 12 |
/ { |
| 13 |
model = "Synology DS116"; |
| 14 |
compatible = "marvell,a385-gp", "marvell,armada385", "marvell,armada380"; |
| 15 |
|
| 16 |
chosen { |
| 17 |
stdout-path = "serial0:115200n8"; |
| 18 |
}; |
| 19 |
|
| 20 |
memory { |
| 21 |
device_type = "memory"; |
| 22 |
reg = <0x00000000 0x40000000>; /* 1 GB */ |
| 23 |
}; |
| 24 |
|
| 25 |
soc { |
| 26 |
ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000 |
| 27 |
MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000 |
| 28 |
MBUS_ID(0x09, 0x19) 0 0xf1100000 0x10000 |
| 29 |
MBUS_ID(0x09, 0x15) 0 0xf1110000 0x10000 |
| 30 |
MBUS_ID(0x0c, 0x04) 0 0xf1200000 0x100000>; |
| 31 |
|
| 32 |
internal-regs { |
| 33 |
i2c@11000 { |
| 34 |
pinctrl-names = "default"; |
| 35 |
pinctrl-0 = <&i2c0_pins>; |
| 36 |
status = "okay"; |
| 37 |
clock-frequency = <100000>; |
| 38 |
|
| 39 |
eeprom@57 { |
| 40 |
compatible = "atmel,24c64"; |
| 41 |
reg = <0x57>; |
| 42 |
}; |
| 43 |
}; |
| 44 |
|
| 45 |
serial@12000 { |
| 46 |
pinctrl-names = "default"; |
| 47 |
pinctrl-0 = <&uart0_pins>; |
| 48 |
status = "okay"; |
| 49 |
}; |
| 50 |
|
| 51 |
serial@12100 { |
| 52 |
/* A PIC16F1829 is connected to uart1 at 9600 bps, |
| 53 |
* and takes single-character orders : |
| 54 |
* "1" : power off // already handled by the poweroff node |
| 55 |
* "2" : short beep |
| 56 |
* "3" : long beep |
| 57 |
* "4" : turn the power LED ON |
| 58 |
* "5" : flash the power LED |
| 59 |
* "6" : turn the power LED OFF |
| 60 |
* "7" : turn the status LED OFF |
| 61 |
* "8" : turn the status LED ON |
| 62 |
* "9" : flash the status LED |
| 63 |
* "A" : flash the motherboard LED (D8) |
| 64 |
* "B" : turn the motherboard LED OFF |
| 65 |
* "C" : hard reset |
| 66 |
*/ |
| 67 |
pinctrl-names = "default"; |
| 68 |
pinctrl-0 = <&uart1_pins>; |
| 69 |
status = "okay"; |
| 70 |
}; |
| 71 |
|
| 72 |
poweroff@12100 { |
| 73 |
compatible = "synology,power-off"; |
| 74 |
reg = <0x12100 0x100>; |
| 75 |
clocks = <&coreclk 0>; |
| 76 |
}; |
| 77 |
|
| 78 |
ethernet@70000 { |
| 79 |
pinctrl-names = "default"; |
| 80 |
phy = <&phy0>; |
| 81 |
phy-mode = "sgmii"; |
| 82 |
buffer-manager = <&bm>; |
| 83 |
bm,pool-long = <0>; |
| 84 |
status = "okay"; |
| 85 |
}; |
| 86 |
|
| 87 |
|
| 88 |
mdio@72004 { |
| 89 |
pinctrl-names = "default"; |
| 90 |
pinctrl-0 = <&mdio_pins>; |
| 91 |
|
| 92 |
phy0: ethernet-phy@1 { |
| 93 |
reg = <1>; |
| 94 |
}; |
| 95 |
}; |
| 96 |
|
| 97 |
sata@a8000 { |
| 98 |
pinctrl-names = "default"; |
| 99 |
pinctrl-0 = <&sata0_pins>; |
| 100 |
status = "okay"; |
| 101 |
#address-cells = <1>; |
| 102 |
#size-cells = <0>; |
| 103 |
|
| 104 |
sata0: sata-port@0 { |
| 105 |
reg = <0>; |
| 106 |
target-supply = <®_5v_sata0>; |
| 107 |
}; |
| 108 |
}; |
| 109 |
|
| 110 |
bm@c8000 { |
| 111 |
status = "okay"; |
| 112 |
}; |
| 113 |
|
| 114 |
usb3@f0000 { |
| 115 |
usb-phy = <&usb3_0_phy>; |
| 116 |
status = "okay"; |
| 117 |
}; |
| 118 |
|
| 119 |
usb3@f8000 { |
| 120 |
usb-phy = <&usb3_1_phy>; |
| 121 |
status = "okay"; |
| 122 |
}; |
| 123 |
}; |
| 124 |
|
| 125 |
bm-bppi { |
| 126 |
status = "okay"; |
| 127 |
}; |
| 128 |
|
| 129 |
gpio-fan { |
| 130 |
compatible = "gpio-fan"; |
| 131 |
gpios = <&gpio1 18 GPIO_ACTIVE_HIGH>, |
| 132 |
<&gpio1 17 GPIO_ACTIVE_HIGH>, |
| 133 |
<&gpio1 16 GPIO_ACTIVE_HIGH>; |
| 134 |
gpio-fan,speed-map = < 0 0>, |
| 135 |
<1500 1>, |
| 136 |
<2500 2>, |
| 137 |
<3000 3>, |
| 138 |
<3400 4>, |
| 139 |
<3700 5>, |
| 140 |
<3900 6>, |
| 141 |
<4000 7>; |
| 142 |
#cooling-cells = <2>; |
| 143 |
}; |
| 144 |
|
| 145 |
gpio-leds { |
| 146 |
compatible = "gpio-leds"; |
| 147 |
|
| 148 |
/* The green part is on gpio0.20 which is also used by |
| 149 |
* sata0, and accesses to SATA disk 0 make it blink so it |
| 150 |
* doesn't need to be declared here. |
| 151 |
*/ |
| 152 |
led-orange { |
| 153 |
gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>; |
| 154 |
label = "ds116:orange:disk"; |
| 155 |
default-state = "off"; |
| 156 |
}; |
| 157 |
}; |
| 158 |
}; |
| 159 |
|
| 160 |
usb3_0_phy: usb3_0_phy { |
| 161 |
compatible = "usb-nop-xceiv"; |
| 162 |
vcc-supply = <®_usb3_0_vbus>; |
| 163 |
#phy-cells = <0>; |
| 164 |
}; |
| 165 |
|
| 166 |
usb3_1_phy: usb3_1_phy { |
| 167 |
compatible = "usb-nop-xceiv"; |
| 168 |
vcc-supply = <®_usb3_1_vbus>; |
| 169 |
#phy-cells = <0>; |
| 170 |
}; |
| 171 |
|
| 172 |
reg_usb3_0_vbus: usb3-vbus0 { |
| 173 |
compatible = "regulator-fixed"; |
| 174 |
regulator-name = "usb3-vbus0"; |
| 175 |
pinctrl-names = "default"; |
| 176 |
pinctrl-0 = <&xhci0_vbus_pins>; |
| 177 |
regulator-min-microvolt = <5000000>; |
| 178 |
regulator-max-microvolt = <5000000>; |
| 179 |
enable-active-high; |
| 180 |
gpio = <&gpio1 26 GPIO_ACTIVE_HIGH>; |
| 181 |
}; |
| 182 |
|
| 183 |
reg_usb3_1_vbus: usb3-vbus1 { |
| 184 |
compatible = "regulator-fixed"; |
| 185 |
regulator-name = "usb3-vbus1"; |
| 186 |
pinctrl-names = "default"; |
| 187 |
pinctrl-0 = <&xhci1_vbus_pins>; |
| 188 |
regulator-min-microvolt = <5000000>; |
| 189 |
regulator-max-microvolt = <5000000>; |
| 190 |
enable-active-high; |
| 191 |
gpio = <&gpio1 27 GPIO_ACTIVE_HIGH>; |
| 192 |
}; |
| 193 |
|
| 194 |
reg_sata0: pwr-sata0 { |
| 195 |
compatible = "regulator-fixed"; |
| 196 |
regulator-name = "pwr_en_sata0"; |
| 197 |
regulator-min-microvolt = <12000000>; |
| 198 |
regulator-max-microvolt = <12000000>; |
| 199 |
enable-active-high; |
| 200 |
regulator-boot-on; |
| 201 |
gpio = <&gpio0 15 GPIO_ACTIVE_HIGH>; |
| 202 |
}; |
| 203 |
|
| 204 |
reg_5v_sata0: v5-sata0 { |
| 205 |
compatible = "regulator-fixed"; |
| 206 |
regulator-name = "v5.0-sata0"; |
| 207 |
regulator-min-microvolt = <5000000>; |
| 208 |
regulator-max-microvolt = <5000000>; |
| 209 |
vin-supply = <®_sata0>; |
| 210 |
}; |
| 211 |
|
| 212 |
reg_12v_sata0: v12-sata0 { |
| 213 |
compatible = "regulator-fixed"; |
| 214 |
regulator-name = "v12.0-sata0"; |
| 215 |
regulator-min-microvolt = <12000000>; |
| 216 |
regulator-max-microvolt = <12000000>; |
| 217 |
vin-supply = <®_sata0>; |
| 218 |
}; |
| 219 |
}; |
| 220 |
|
| 221 |
&spi0 { |
| 222 |
pinctrl-names = "default"; |
| 223 |
pinctrl-0 = <&spi0_pins>; |
| 224 |
status = "okay"; |
| 225 |
|
| 226 |
flash@0 { |
| 227 |
#address-cells = <1>; |
| 228 |
#size-cells = <1>; |
| 229 |
compatible = "macronix,mx25l6405d", "jedec,spi-nor"; |
| 230 |
reg = <0>; /* Chip select 0 */ |
| 231 |
spi-max-frequency = <50000000>; |
| 232 |
m25p,fast-read; |
| 233 |
|
| 234 |
/* Note: there is a redboot partition table despite u-boot |
| 235 |
* being used. The names presented here are the same as those |
| 236 |
* found in the FIS directory. There is also a small device |
| 237 |
* tree in the last 64kB of the RedBoot partition which is not |
| 238 |
* enumerated. The MAC address and the serial number are listed |
| 239 |
* in the "vendor" partition. |
| 240 |
*/ |
| 241 |
partition@0 { |
| 242 |
label = "RedBoot"; |
| 243 |
reg = <0x00000000 0x000f0000>; |
| 244 |
read-only; |
| 245 |
}; |
| 246 |
|
| 247 |
partition@c0000 { |
| 248 |
label = "zImage"; |
| 249 |
reg = <0x000f0000 0x002d0000>; |
| 250 |
}; |
| 251 |
|
| 252 |
partition@390000 { |
| 253 |
label = "rd.gz"; |
| 254 |
reg = <0x003c0000 0x00410000>; |
| 255 |
}; |
| 256 |
|
| 257 |
partition@7d0000 { |
| 258 |
label = "vendor"; |
| 259 |
reg = <0x007d0000 0x00010000>; |
| 260 |
read-only; |
| 261 |
}; |
| 262 |
|
| 263 |
partition@7e0000 { |
| 264 |
label = "RedBoot config"; |
| 265 |
reg = <0x007e0000 0x00010000>; |
| 266 |
read-only; |
| 267 |
}; |
| 268 |
|
| 269 |
partition@7f0000 { |
| 270 |
label = "FIS directory"; |
| 271 |
reg = <0x007f0000 0x00010000>; |
| 272 |
read-only; |
| 273 |
}; |
| 274 |
}; |
| 275 |
}; |
| 276 |
|
| 277 |
&pinctrl { |
| 278 |
/* use only one pin for UART1, as mpp20 is used by sata0 */ |
| 279 |
uart1_pins: uart-pins-1 { |
| 280 |
marvell,pins = "mpp19"; |
| 281 |
marvell,function = "ua1"; |
| 282 |
}; |
| 283 |
|
| 284 |
xhci0_vbus_pins: xhci0_vbus_pins { |
| 285 |
marvell,pins = "mpp58"; |
| 286 |
marvell,function = "gpio"; |
| 287 |
}; |
| 288 |
xhci1_vbus_pins: xhci1_vbus_pins { |
| 289 |
marvell,pins = "mpp59"; |
| 290 |
marvell,function = "gpio"; |
| 291 |
}; |
| 292 |
}; |