| 1 |
// SPDX-License-Identifier: GPL-2.0+ |
| 2 |
/* |
| 3 |
* Device Tree file for Seagate Blackarmor NAS220 |
| 4 |
* |
| 5 |
* Copyright (C) 2014 Evgeni Dobrev <[email protected]> |
| 6 |
*/ |
| 7 |
|
| 8 |
/dts-v1/; |
| 9 |
|
| 10 |
#include <dt-bindings/gpio/gpio.h> |
| 11 |
#include <dt-bindings/input/input.h> |
| 12 |
#include "kirkwood.dtsi" |
| 13 |
#include "kirkwood-6192.dtsi" |
| 14 |
|
| 15 |
/ { |
| 16 |
model = "Seagate Blackarmor NAS220"; |
| 17 |
compatible = "seagate,blackarmor-nas220","marvell,kirkwood-88f6192", |
| 18 |
"marvell,kirkwood"; |
| 19 |
|
| 20 |
memory { /* 128 MB */ |
| 21 |
device_type = "memory"; |
| 22 |
reg = <0x00000000 0x8000000>; |
| 23 |
}; |
| 24 |
|
| 25 |
chosen { |
| 26 |
bootargs = "console=ttyS0,115200n8"; |
| 27 |
stdout-path = &uart0; |
| 28 |
}; |
| 29 |
|
| 30 |
gpio_poweroff { |
| 31 |
compatible = "gpio-poweroff"; |
| 32 |
gpios = <&gpio0 14 GPIO_ACTIVE_LOW>; |
| 33 |
}; |
| 34 |
|
| 35 |
gpio_keys { |
| 36 |
compatible = "gpio-keys"; |
| 37 |
|
| 38 |
button-reset { |
| 39 |
label = "Reset"; |
| 40 |
linux,code = <KEY_POWER>; |
| 41 |
gpios = <&gpio0 29 GPIO_ACTIVE_HIGH>; |
| 42 |
}; |
| 43 |
|
| 44 |
button-power { |
| 45 |
label = "Power"; |
| 46 |
linux,code = <KEY_SLEEP>; |
| 47 |
gpios = <&gpio0 26 GPIO_ACTIVE_LOW>; |
| 48 |
}; |
| 49 |
}; |
| 50 |
|
| 51 |
gpio-leds { |
| 52 |
compatible = "gpio-leds"; |
| 53 |
|
| 54 |
led-blue-power { |
| 55 |
label = "nas220:blue:power"; |
| 56 |
gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>; |
| 57 |
linux,default-trigger = "default-on"; |
| 58 |
}; |
| 59 |
}; |
| 60 |
|
| 61 |
regulators { |
| 62 |
compatible = "simple-bus"; |
| 63 |
#address-cells = <1>; |
| 64 |
#size-cells = <0>; |
| 65 |
pinctrl-0 = <&pmx_power_sata0 &pmx_power_sata1>; |
| 66 |
pinctrl-names = "default"; |
| 67 |
|
| 68 |
sata0_power: regulator@1 { |
| 69 |
compatible = "regulator-fixed"; |
| 70 |
reg = <1>; |
| 71 |
regulator-name = "SATA0 Power"; |
| 72 |
regulator-min-microvolt = <5000000>; |
| 73 |
regulator-max-microvolt = <5000000>; |
| 74 |
enable-active-high; |
| 75 |
regulator-always-on; |
| 76 |
regulator-boot-on; |
| 77 |
gpio = <&gpio0 24 GPIO_ACTIVE_LOW>; |
| 78 |
}; |
| 79 |
|
| 80 |
sata1_power: regulator@2 { |
| 81 |
compatible = "regulator-fixed"; |
| 82 |
reg = <2>; |
| 83 |
regulator-name = "SATA1 Power"; |
| 84 |
regulator-min-microvolt = <5000000>; |
| 85 |
regulator-max-microvolt = <5000000>; |
| 86 |
enable-active-high; |
| 87 |
regulator-always-on; |
| 88 |
regulator-boot-on; |
| 89 |
gpio = <&gpio0 28 GPIO_ACTIVE_LOW>; |
| 90 |
}; |
| 91 |
}; |
| 92 |
}; |
| 93 |
|
| 94 |
/* |
| 95 |
* Serial port routed to connector CN5 |
| 96 |
* |
| 97 |
* pin 1 - TX (CPU's TX) |
| 98 |
* pin 4 - RX (CPU's RX) |
| 99 |
* pin 6 - GND |
| 100 |
*/ |
| 101 |
&uart0 { |
| 102 |
status = "okay"; |
| 103 |
}; |
| 104 |
|
| 105 |
&pinctrl { |
| 106 |
pinctrl-0 = <&pmx_button_reset &pmx_button_power>; |
| 107 |
pinctrl-names = "default"; |
| 108 |
|
| 109 |
pmx_act_sata0: pmx-act-sata0 { |
| 110 |
marvell,pins = "mpp15"; |
| 111 |
marvell,function = "sata0"; |
| 112 |
}; |
| 113 |
|
| 114 |
pmx_act_sata1: pmx-act-sata1 { |
| 115 |
marvell,pins = "mpp16"; |
| 116 |
marvell,function = "sata1"; |
| 117 |
}; |
| 118 |
|
| 119 |
pmx_power_sata0: pmx-power-sata0 { |
| 120 |
marvell,pins = "mpp24"; |
| 121 |
marvell,function = "gpio"; |
| 122 |
}; |
| 123 |
|
| 124 |
pmx_power_sata1: pmx-power-sata1 { |
| 125 |
marvell,pins = "mpp28"; |
| 126 |
marvell,function = "gpio"; |
| 127 |
}; |
| 128 |
|
| 129 |
pmx_button_reset: pmx-button-reset { |
| 130 |
marvell,pins = "mpp29"; |
| 131 |
marvell,function = "gpio"; |
| 132 |
}; |
| 133 |
|
| 134 |
pmx_button_power: pmx-button-power { |
| 135 |
marvell,pins = "mpp26"; |
| 136 |
marvell,function = "gpio"; |
| 137 |
}; |
| 138 |
}; |
| 139 |
|
| 140 |
&sata { |
| 141 |
status = "okay"; |
| 142 |
nr-ports = <2>; |
| 143 |
}; |
| 144 |
|
| 145 |
&i2c0 { |
| 146 |
status = "okay"; |
| 147 |
|
| 148 |
adt7476: thermal@2e { |
| 149 |
compatible = "adi,adt7476"; |
| 150 |
reg = <0x2e>; |
| 151 |
}; |
| 152 |
}; |
| 153 |
|
| 154 |
&nand { |
| 155 |
status = "okay"; |
| 156 |
}; |
| 157 |
|
| 158 |
&mdio { |
| 159 |
status = "okay"; |
| 160 |
|
| 161 |
ethphy0: ethernet-phy@8 { |
| 162 |
reg = <8>; |
| 163 |
}; |
| 164 |
}; |
| 165 |
|
| 166 |
ð0 { |
| 167 |
status = "okay"; |
| 168 |
|
| 169 |
ethernet0-port@0 { |
| 170 |
phy-handle = <ðphy0>; |
| 171 |
}; |
| 172 |
}; |